ADDITION ALTERATION TO TOILETS OF KG SCHOOL AT CGRA KUNJATHBAIL AND ADDITION ALTERATION OF WALL, FLOORING AND ROOF NEAR BLDG NO P -108 CG DHQ 3 AND PROVISION OF GAZEEBO AT 159.03 ACRES ICGAP LAND AND PROVISION OF COMMERCIAL WATER PURIFIER AT OTM ACCN

Amount

SCH A PART-I [ ADDITION ALTERATION TO TOILETS OF KG SCHOOL AT CGRA KUNJATHBAIL] Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc complete all as specified and directed.

Taking down chowkats or frames n exc 1.5 sqm each (without taking off shutters from the frames) complete all as specified and directed.

M & L for Non - skid Ceramic tiles, coloured, 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, with and incl 20 mm thick screed bed in cement mortar 1:4 complete all as specified and directed.

M & L for Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick, coloured, set and jointed in neat cement slurry and pointed in white or colour cement to match, with and incl 10 mm thick backing in cement mortar 1:4 complete all as specified and directed.

S & F Factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made complete all as specified and directed.

S & F Figured glass, 4mm thick, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and directed.

S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

S & F 75mm butt hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed complete all as specified and directed.

S & F Aluminium handles 100 mm long cast type, anodised complete all as specified and directed.

S & F 100mm Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S & F in repair water closet (squatt pattern) vitreous China 'Orissa' pattern size 580 x 440 mm white with integral foot rests excluding flushing cistern but including PVC flush pipe, connection to trap and flush pipe, anti syphonage pipe etc and provision of lime concrete bedding, including trap set in and including concrete and making good to floor complete all as specified and directed.

S & F in repairs 10 litres capacity high or low level automatic flushing cistern PVC with IS-7231 marking, whte valveless syphonic action type, inlet ball valve, float and handle, complete including 32 mm dia PVC flush pipe and brackets complete all as specified and directed.

Taking up or down 15mm dia steel tubing and connections setting aside serviceable pipe for reuse and removing unserviceable pipe from site complete all as specified and directed.

Taking up or down 20mm dia steel tubing and connections setting aside serviceable pipe for reuse and removing unserviceable pipe from site complete all as specified and directed.

Supplying and laying of 16mm dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors complete all as specified and directed.

Supplying and laying of 20mm dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors complete all as specified and directed.

S & F in repairs PVC connection 15mm size with PTMT nuts of length 450mm. complete all as specified and directed.

S & F 75mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S & F 75mm dia PVC (SWR) bends any radius complete all as specified and directed.

S & F in repairs 15mm dia, Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S & F Stop valves 15mm dia, fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S & F in repairs, vitreous China wash down water closet pan (pedestal pattern), coloured, including connection to outgoing drain and flushing pipe, anti syphonic pipe with seat and cover, mild steel chromium plated hinging device complete but excluding flushing cistern including making good damaged/disturbed surfaces complete all as specified and directed.

S & F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.

S & F Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed.

SCH A PART-II [ ADDITION ALTERATION OF WALL, FLOORING AND ROOF NEAR BLDG NO P -108 CG DHQ 3] Excavation in trenches width not exceeding 1.5mtr and depth not exceeding 1.5metre for foundations, not exceeding 10 Sqm on plan for manholes etc and getting out in soft/disintegrated rock, complete all as specified and directed.

M & L for Plain cement concrete 1:4:8 type D2 using 40mm graded stone aggregate as in fdn /mass concrete for wall and post struts complete all as specified and directed. [Total Quantity:- 0.30 (SCH A PART-II) + 1.50 (SCH A PART-III) = 1.80 Cum]

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/disintegarted rock complete all as specified and directed. [Total Quantity:- 4.00 (SCH A PART-II) + 4.32 (SCH A PART-II) = 8.32 Cum]

Removing excavated material exc. 50m and n.exc 100m & depositing where directed at a level n exc.1.5m in soil complete all as specified and directed.

M & L Dressed laterite stone masonry, well bonded, bedded and solidly hearted built in Cement mortar 1:6 complete all as specified and directed.

M & L Rendering 15mm thick in Cement mortar 1:4 on fair faces of stone masonry finished even and smooth without using extra cement complete all as specified and directed. [Total Quantity:- 15.00 (SCH A PART-II) + 18.00 (SCH A PART-III) = 33.00 Sqm]

M & L Preparation of new plaster surfaces and applying two coats of cement based paint over a coat of primer complete all as specified and directed. [Total Quantity:- 15.00 (SCH A PART-II) + 18.00 (SCH A PART-III) = 33.00 Sqm]

Demolition and breaking up 150/110 mm bore salt glazed ware ,AC or reinforced concrete pipe or any other description complete all as specified and directed.

M & L for PVC Pipe 150mm bore drain pipes laid in trenches and jointed complete all as specified and directed.

M & L Concrete bed to 150mm bore drain pipes incl packing under, and haunching against the sides of pipes after they are laid and tested; in cement concrete 1:4:8 type D2 complete all as specified and directed.

M & L Providing Plain cement mortar type B1-1:2:4 (using 20mm graded stone aggregate) in height, coping, kneelers, apex stones, bed plates, including weathering, slightly, rounded or chamfered angles and throating complete all as specified and directed.

M & L Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15cm thick, spread, levelled and rammed including watering from out side of Defence land complete all as specified and directed.

M & L Virified Ceramic tiles light shade of 10mm thick (Square/rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15mm screed bed 1:4 complete all as specified and directed.

All as per Item No 38.00 here-in- before but as in skirting over 10mm thick rendering in Cement mortar (1:4) complete all as specified and directed.

M & L Plain cement concrete 100mm thick cement concrete type D2 1:4:8 (using 40mm graded stone aggregate) as sub base etc complete all as specified and directed.

M & L Plain cement concrete 25mm thick cement concrete type B-O (using 12.50mm graded crushed stone aggregate) as in floors finished rough to receive floor finishes complete all as specified and directed.

S & F Fe 290W (Gde E-165) quality A for Roof truses (framed), trussed, purlins, crane grantries, rails and fasternings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, clests etc complete all as specified and directed.

S & F Fe 410W (Gde E-250) quality A for 6mm thick mild steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted,bolted or welded attachment to bottom of GI pipe complete all as specified and as directed conforming to Fe-410W complete all as specified and directed.

M & L Two coats of synthetic enamel paint over a coat of red oxide on new steel surfaces of any description, not otherwise described over 10cm width or grith after preparation complete all as specified and directed. [Total Quantity:- 5.00 (SCH A PART-II) + 20.00 (SCH A PART-III) + 32.00 ( SCH A PART-V) = 57.00 Sqm]

S & F for Pre painted galvalume aluminium zinc coating Gi based coorugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed.

S & F Aluminium snap grid size 605mm x 605mm false ceiling frame work of angle 25mm x 25mm x 2mm. Main TEE 38mm x 25mm x1.5mm and cross TEE 25mm x 25mm x1.4mm and size of grid 605mm x 605mm complete all as specified and directed.

Providing and fixing 12mm thick perforated Gypsum Board 600mm x 600mm size in ceiling fixed with screw as per manufacturers instructions complete all as specified and directed.

S & F hangers 6mm dia GI(upto 1200 mm length)adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40mm x 3mm size 60mm long and expansion hold fasteners 12.50mm dia, 40 mm long complete all as specified and directed.

M & L Reinforced cement concrete of grade 1:1.5:3 using 20mm graded stone aggregate as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under-reamed piles and mass concrete including form work etc complete all as specified and directed.

M & L Mild steel TMT bars 10mm dia & over cut to length ,bent to shape required including cranking, bending spirally for hooping for coloumns,hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia or securing withclips complete all as specified and directed.

M & L Mild steel TMT bars 5mm dia and over up to and including 10mm dia & over cut to length ,bent to shape required including cranking, bending spirally for hooping for coloumns,hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia or securing with clips as in stirrups, spaces and binders complete all as specified and directed.

M & L Providing Plain cement concrete type B1-1:2:4 (using 20mm graded stone aggregate) in height, coping, kneelers, apex stones,bed plates,including weathering, slightly, rounded or chamfered angles and throating complete all as specified and directed.

S & F PVC SWR 'S' trap 110 with grating complete all as specified and directed.

S & F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to wall complete all as specified and directed.

S & F PVC (SWR) bend with door suitable for 110mm bore pipes complete all as specified and directed.

SCH A PART-III [PROVISION OF GAZEEBO AT 159.03 ACRES ICGAP LAND] Excavation in trenches width not exceeding 1.5mtr and depth not exceeding 1.5metre for foundations, not exceeding 10 Sqm on plan for manholes etc and getting out in hard/dense soil, complete all as specified and directed.

Returning filling in hard/dense soil including spreading levelling watering and well ramming in layers not exceeding 25 cm thick complete all as specified and directed.

M & L Dressed laterite stone masonry, regular coursed, well bonded, bedded and solidly hearted built in Cement mortar 1:4 complete all as specified and directed.

Rough excavation not exceeding 1.5 m deep and getting out soft/loose soil complete all as specified and directed.

Removing excavated soil material exc. 250 m but n exc. 500 m and depositing complete all as specified and directed.

Labour only for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M & L Hardcore of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M & L Plain cement concrete type D- 2, 1:4:8 (using 40mm graded stone aggregate) 75mm thick in flooring complete all as specified and directed.

S & F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS.1161-1979 grade St.-240 , complete all as specified and directed [Total Quantity:- 95.00 (SCH A PART-III) + 558.00 (SCH A PART-V) = 653.00 Kg]

S & F Fe 410W (Gde E-250) quality A for Roof trusses (framed), trussed, purlins, crane grantries, rails and fasternings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and directed. [Total Quantity:- 195.00 (SCH A PART-III) + 238.00 (SCH A PART-V) = 433.00 Kg]

M & L Roof tiles, Mangalore pattern, interlocking at side joints, laid dry complete all as specified and directed.

M & L ridge or hip tiles to suit Mangalore pattern of roofing tiles, bedded and jointed in cement mortar 1:6 complete all as specified and directed.

M & L Reinforced cement concrete in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, in cement concrete Type B-1 1:2:4 (using 20mm graded stone aggregates) complete all as specified and directed.

M & L Formwork to soffits of flat suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.

S & F TMT steel bars 6mm to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clip complete all as specified and directed.

M & L for Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete, with and including 20 mm thick screed bed in cement mortar 1:4 complete all as specified and directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situation complete all as specified and directed.

M & L for Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, light shaded, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete, with and including 20 mm thick screed bed in cement mortar 1:4 complete all as specified and directed.

SCH A PART -IV [ PROVISION OF COMMERCIAL WATER PURIFIER AT OTM ACCN PANAMBUR UNDER CGDHQ 3 ] Supply and installation of water purifiier system of capacity 100 LPH water purifier with sediment filter ,carbon filter,ultra filtration and UV stabilizer with stainless steel skid having storage water capacity Normal water capacity :100L,Cold water capacity 50 L,and hot water online complete all as specified and as directed.

M & L Sub main wiring with 2 runs of 6 sqmm single core PVC insulated unsheathed multistranded copper conductor cable 1100 volts grade FRLS drawing in and including PVC casing capibng in wall of suitable size complete including provn of 4 sqmm PVC insulated copper conductor earth continuity wire . Note :-One run of three single core cable and conduit shall be measured as one length complete all as specified and directed.

S & F Modular MCB SP, 20 Amp, 'C' curve, 10kA, 240 V with 20A, 3 pin modular Socket and including plastic enclosure as per manufacturer instruction fixed on wall surface complete all as specified and directed.

S & F in replacement CPVC ball valve of size 25mm outer dia complete all as specified and directed.

Supplying and laying of 25mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings onwalls/ceiling or laying in floors complete all as specified and directed.

SCH A PART -V [PROVISION OF WALKWAY IN FRONT OF CG DHQ 3 NEW MANGALORE] Excavation in post holes in hard/dense soil each n exc 0.50cum getting out,returning in and ramming earth or broken rubble mixed with earth around in layer not exc 25 cm watering and removing surplus soil to a distance n exc 50m and making good surface complete all as specified and directed.

M & L Plain Cement Concrete Type B2 1:2:4 (using 40 mm graded stone aggregate) in post holes, including use and waste of form work complete all as specified and directed.

M & L Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey pigment cement and pigments, with and including 20 mm thick cement screed in Cement mortar 1:4 complete all as specified and directed.

M & L Plain cement concrete Type C2 1:3:6 (using 40mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and directed.

S & F for 2mm thick polycarbonate sheet of any colour or texture as in roof covering/cladding to wall fixed with and including necessary aluminium flat/fittings complete all as specified and directed.

Note:- 1. Separate Abstract/bill of quantity for each Part (I to V) shall be submitted while claiming the RAR/ Final Bill. 2. MB Entry strictly part wise for each items and each part and clubbing up of measurement of same nature of items from various parts shall not be entertained for payment.

KOTIAN -ECC