REWIRING OF CERTAIN BLDGS AND CONNECTED ITEMS AT FORT AREA NAGPUR UNDER AND REPAIR REPLACEMENT TO UG CABLE, MAINT AND REPLACEMENT OF LT CABLE AND CONNECTED ITEMS OF DISTRIBUTION SYSTEM AT FORT AREA NAGPUR UNDER GE KAMPTEE.

Amount

Taking down point wiring with aluminum conductor cable of light point fan & socket light & power complete including light fittings any type switches, sockets, ceiling rose, switch boards, bell/buzzer, bell push, tube light fitting, regulator etc, and making good to the disturbed surfaces of walls/ floor etc to match with existing surfaces including white washing/colour washing/ distemper to match with existing wall/floor/ceiling finishes complete all as specified and directed.

Taking down sheet metal enclosure DB, MCB, main switch etc and making good disturbed surfaces to match with existing surfaces complete all as specified and directed.

Taking down sub main wiring of any size/ capacity complete all as specified and making good disturbed surfaces to match with the existing surfaces complete all as specified and directed.

M&L point wiring 1100 volt grade single core FRLSH PVC insulated and unsheathed cable with multistranded copper conductor 1.50 sqmm drawn in and including electrical grade PVC conduit not less than 20mm dia with IS 9537 (Part-III) 1983 marked medium grade concealed on surface of wall/ceiling including FRLSH PVC insulated unsheathed earth wire with multistranded copper conductor of size 1.50 sqmm pressed steel modular boxes sunk on wall for mounting of modular switches, switch sockets, fan regulator etc including modular cover with frame any size complete all as specified and making good disturbed surfaces for one light point controlled by one, one way switch.(Cable Make : Finolex, L&T, Legrand, Havells, Polycab) (PVC Conduit Make : Polycab, Anchor, Finolex) Note :- Cost of cable provided from sub main DB to respective switch board in rooms shall be included in the quoted point wiring rate. All switches, fan, sockets, ceiling roses and holders shall be connected to common earth dolly.

As per item No 4 above but One ceiling /exhaust fan point controlled by one switch and regulator complete all as specified and directed.

As per item No 4 above but One 3 pin 5 amp socket out point on the same board with other switches complete all as specified and directed.

As per item No 4 above but One 3 pin 5 amps socket out let point on independent board complete all as specified and directed.

As per item No 4 above but One bell/buzzer point controlled by one bell push complete all as specified and directed.

All as per item Sl No 4 here in before but wiring with 2.5 sqmm multi stranded cable and earth wire with copper conductor of size 2.5 sqmm for 15 amps power point complete all as specified and directed.

M&L for sub main wiring with two single core PVC FR LSH insulated unsheathed stranded copper conductor and earth wire 1100 volt grade and drawing into PVC conduit not less than 20 mm medium grade concealed in wall of the following sizes :- 2x2.5 Sqmm with earth wire of 1x2.5 Sqmm. (Cable Make : Finolex, L&T, Legrand, Havells, Polycab) (PVC Conduit Make : Polycab, Anchor, Finolex) Note :- Accessories for point/sub main wiring like PVC junction box, bend, Tee, elbow shall be of same make.

As per item No 10 above but 2x4.0 Sqmm with earth wire of 1x4.0 Sqmm complete all as specified and directed.

As per item No 10 above but 2x 6.0 Sqmm with earth wire of 1x6.0 Sqmm complete all as specified and directed.

Supply and fix ceiling rose surface type 2/3 terminal 5 amps complete all as specified and directed. Make : Anchor Roma, Legrand, Crabtree

S&F Bell ding dong, AC 230 volts, single phase complete all as specified and directed.

Supply and fix lamp holder insulated body with back plate for angle/ batten fitting complete all as specified and directed.

Supply and fix Modular switch one way 6A, 1 module complete all as specified and directed. Make : Anchor Roma, Legrand, Crabtree

Supply and fix Modular switch one way 16A, 1 module complete all as specified and directed. Make : Anchor Roma, Legrand, Crabtree

Supply and fix Modular bell push 6A, 1 module complete all as specified and directed. Make :Anchor Roma, Legrand, Crabtree

Supply and fix Modular Socket 6A 2/3 pin combined 2 module complete all as specified and directed. Make : Anchor Roma, Legrand, Crabtree

Supply & Fix Modular Socket 6A/ 16A 2/3 pin combined 2 module complete all as specified and directed. Make : Anchor Roma, Legrand, Crabtree

Supply and fix Modular Fan step regulator,120 watt 2 module complete all as specified and directed. complete all as specified and directed. Make : Anchor Roma, Legrand, Crabtree

Supply and Fix Highly durable surface mounted 18/20 watts LED batten/surface constructed of fire retardant engineering grade extruded aluminium body 100 lumen per watt, min 2000 lumen and decorative end cap complete with driver including 3 core 1.0 sqmm copper conductor cable for connection and accessories all as specified and directed Make :- Bajaj/ Syska/ Wipro/ Jaquar.

Supply & fix light fitting 9W bulk head luminaries with lamp holders etc complete with all accessories and including connecting up with twin core twisted flexible cable suitable size of 230V, 50HZ complete all as specified and directed. Make: Bajaj/ Syska/ Wipro/ Jaquar.

Supply & fix fittings with surface mount LED down lighters 12 W including driver with rated voltage 240 V , 50 Hz, complete all as specified and directed. Make: Bajaj/ Syska/ Wipro/ Jaquar.

Supply and fix Energy efficient surface mounted 2'X2' grid Ceiling LED fitting 36/40 W rated voltage 240 V, 50Hz combination with profiled and flat diffuse complete all as specified and directed. Make : Bajaj/ Syska/ Wipro/ Jaquar.

Supply and fix LED baton fitting 2' length including drivers having energy consumption, 10/11W ,230 V ,50Hz, 6500K, not less than 800 lumen prewired, complete all as specified and directed. Make : Bajaj/ Syska/ Wipro/ Jaquar.

Supply and fix building security light LED 25 W with Lumen O/P 1800 with driver with rated voltage 240 V, 50Hz,including mounting GI (made out of 25 mm dia light grade pipe 0.8 m bent two shape including FI clamps nut bolts etc complete all as specified and directed. Make : Bajaj/ Syska/ Wipro/ Jaquar.

Supply and fix sheet metal enclosure single pole & neutral for 240 volts 4/6 way with 200 Amp rated bus bar flush /surface mounting double door, complete all as specified and directed. Make-Legrand/ L&T/ Havells.

Supply and fix sheet metal enclosure single pole & neutral for 240 volts 8 way with 200 Amp rated bus bar flush /surface mounting double door complete all as specified and directed. MakeLegrand/ L&T/ Havells.

Supply and fix sheet metal enclosure triple pole & neutral for 415 volts 4 way with 200 Amp rated bus bar flush /surface mounting double door complete all as specified and directed. Make-Legrand/ L&T/ Havells.

Supply and fix sheet metal enclosure vertical triple pole & neutral(VTPN) with MCCB 63 amps for 415 volts 4 way with 200 Amp rated bus bar flush /surface mounting double door complete all as specified and directed. Make-Legrand/ L&T/ Havells.

Supply and fix MCB single pole 240 volt 6 to 40 amps 10 KA breaking capacity, 'C' series complete all as specified and directed. Make-Legrand/ L&T/ Havells.

Supply and fix MCB single pole and neutral 240 volt 6 to40 amps 10 KA breaking capacity, 'C' series, complete all as specified and directed. MakeLegrand/ L&T/ Havells.

Supply and fix MCB triple pole and neutral 415 volt 40 to 60 amps 10 KA complete all as specified and directed. MakeLegrand/ L&T/ Havells.

Earthing complete with galvanized street earth plate electrode 600x600x6mm thick buried directly in ground (earth plate not less than 2.25mtr deep below normal ground level) with top edge of the plate not less then 1.50 mtr. below the normal ground level connected to galvanized earth lead wire 4.00 mm dia by means of bolts nuts check nuts & washer of galvanized iron or steel all as shown in electrical plate No 5 connected to earthing test point all as specified and testing on completion including the material and labour for :-(a) Excavation and earth work or drilling hole for electrode in any type of soil (b) PCC pit in cement concrete 1:2:4 TYPE B-1 (.c) Pre cast RCC cover with suitable handle 40mm thick in PCC 1:2:4 reinforced with welded steel wire fabric weighting not less than 1.87 Kg/sqmm (d) Funnel with watering pipe of GI 20mm nominal bore medium grade and Aluminum lugs etc all as specified.(e) 15mm nominal bore medium grade GI protection pipe up to 7.50 meter long for protection of earthing lead.(f) Requisite quantity of charcoal and common salt (g) Connection to earthing test point and testing on completion.

Supply, Installation and testing of P4 type wall hung outdoor LED screen having pixel pitch 4mm, pixel density 62500 pixels/sqmm, 1280X960 mm, mild steel cabinet, IP 65 rated, brightness 7500 - 8500 cd/sqm, 500 W/sqm 240V 50Hz, frame frequency 60Hz having min life span of 100000 hrs, built in fans for heat dissipation, Input Signal by HDMI/USB/VGA/DVI as per OEM and content display programmed as per user requirements and min 2 year OEM warranty complete all as specified and directed.

Excavation in trenches for laying of cable trench, pole and stay foundation in any type of soft/loose soil not exceeding 1.5 mtr wide and not exceeding 1.50 mtr deep and getting out complete all as specified and directed.

Returning filling in,including spreading,leveling watering and well ramming in layers not exceeding 25 cms thick complete all as specified and directed.

Removing excavated materials to a distance not exceeding 50 Mtr & depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed.

Supply and fix/laying Double wall corrugated High Density Polymer Ethyl(HDPE) pipe for laying of electric cable of following sizes with IS 14930 (part 2) 2001 and thickness laid in trenches, wall, poles including bends, sockets and other connected accessories Outer dia 50mm and 38 mm inner dia, thickness 6mm complete all as specified and directed. Make : Ketron/tirupati.

All as per item No. 41 but above Outer dia 90mm and 78 mm inner dia, thickness 6mm complete all as specified and directed.

Supply and laying in trenches or fixing in walls / poles or drawing through pipe XLPE insulated, screened,PVC bedded, galvanised steel strip or wire armoured,electric power cables ( heavy duty) with aluminium conductor, 1100 volts, grade cross sectional area 10 sqmm 4 core. Following sizes including testing after laid and jointed complete all as specified and as directed

All as per item No. 43 but above 50 sqmm 3.5 core complete all as specified and as directed

All as per item No. 43 but above 70 sqmm 3.5 core complete all as specified and as directed

All as per item No. 43 but above 95 sqmm 3.5 core complete all as specified and as directed

M&L for outdoor type cubical panel board made out of 3.15 mm thick CRCA sheet for outer shell and made ot of 2 mm thick CRCA sheet for inner shell and MS angle frame 50X50X6 mm CPRI approved fabricated double door including CT and PT of suitable rating with internal connection in aluminium strip of suitable rating both side openable suitable for 3 phase 415 V powder coated 90 microns comprising of following (a) TPN 04 nos aluminium busbar in equal size 3 phase and neutral 300 amp rating duly insulated fitted on heat shrinkable insulation and covered with colour sleeve.. (b) Incoming MCCB 160 Amp 25 KA 415 V FP - 01 Nos. (c) Outgoing MCCB 40 Amp 16 ka 415 V 3P - 06 Nos (d) Outgoing MCB FP 32 Amp C Curve , 10 KA - 01 Nos. (e) Multifunction meter for measure,current of Amp, Voltage and Frequency. (f) LED Indicator lamp - 01 Set of Three.

M&L for outdoor type cubical panel board made out of 3.15 mm thick CRCA sheet for outer shell and made ot of 2 mm thick CRCA sheet for inner shell and MS angle frame 50X50X6 mm CPRI approved fabricated double door including CT and PT of suitable rating with internal connection in aluminium strip of suitable rating both side openable suitable for 3 phase 415 V powder coated 90 microns comprising of following (a) TPN 04 nos aluminium busbar in equal size 3 phase and neutral 400 amp rating duly insulated fitted on heat shrinkable insulation and covered with colour sleeve.. (b) Incoming MCCB 250 Amp 36 KA 415 V FP - 01 Nos. (c) Outgoing MCCB 200 Amp 25 ka 415 V 3P - 01 Nos (d) Outgoing MCCB 125 Amp 25 ka 415 V 3P - 02 Nos . (e) Multifunction meter for measure,current of Amp, Voltage and Frequency. (f) LED Indicator lamp - 01 Set of Three.

M&L for outdoor type cubical panel board made out of 3.15 mm thick CRCA sheet for outer shell and made ot of 2 mm thick CRCA sheet for inner shell and MS angle frame 50X50X6 mm CPRI approved fabricated double door including CT and PT of suitable rating with internal connection in aluminium strip of suitable rating both side openable suitable for 3 phase 415 V powder coated 90 microns comprising of following (a) TPN 04 nos aluminium busbar in equal size 3 phase and neutral 300 amp rating duly insulated fitted on heat shrinkable insulation and covered with colour sleeve.. (b) Incoming MCCB 200 Amp 25 KA 415 V FP - 01 Nos. (c) Outgoing MCCB 63 Amp 16 ka 415 V FP - 06 Nos (d) Outgoing MCB FP 32 Amp C Curve , 10 KA - 01 Nos. (e) Multifunction meter for measure,current of Amp, Voltage and Frequency. (f) LED Indicator lamp - 01 Set of Three.

M&L for outdoor type cubical panel board made out of 3.15 mm thick CRCA sheet for outer shell and made ot of 2 mm thick CRCA sheet for inner shell and MS angle frame 50X50X6 mm CPRI approved fabricated double door including CT and PT of suitable rating with internal connection in aluminium strip of suitable rating both side openable suitable for 3 phase 415 V powder coated 90 microns comprising of following (a) TPN 04 nos aluminium busbar in equal size 3 phase and neutral 200 amp rating duly insulated fitted on heat shrinkable insulation and covered with colour sleeve.. (b) Incoming MCCB 125 Amp 25 KA 415 V FP - 01 Nos. (c) Outgoing MCCB 63 Amp 25 ka 415 V FP - 03 Nos (d) Outgoing MCB FP 40 Amp C Curve , 10 KA - 01 Nos. (e) Multifunction meter for measure,current of Amp, Voltage and Frequency. (f) LED Indicator lamp - 01 Set of Three.

Supply & fixing GI brackets made of 40 mm nominal bore GI pipe medium grade of required length not less than 1.5 M long, mounting brackets made out of Mild steel FI 40x6 mm of required shape ( two Nos) duly fitted with Mild steel nuts, bolts and washers and painting with two coats of synthetic enamelled paint over one coat of red oxide Zn chrome primer and fixed to pole / walls etc complete all as specified and as directed.

S&F thermoplastic cable junction box IP- 55 /IP-65 with metric knockout for cable entry of size 200 x160 x98 mm fixing on pole with 30 x 5 mm MS clamp , nut bolt washer , terminal block and glands suitable for 16 Sqmm core cable including 6-32 Amp MCB SP and including S&F 1.5 Sqmm x 3 core 9 RM length of copper conductor cable and making connections complete all as specified and directed.

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed.

Supply and fix Galvanized octagonal decorative poles (6.0 meter long) complete with base plate and finial taper plug, nuts and bolts including foundation and coping complete all as specified and directed.

Supply, fixing and connecting street light timer switch digital type having 24 hours to 7 days time setting astro type ( having longitude and latitude in memory) with 6 years battery back complete with following accessories provisioned in factory made sheet metal box powder coated and fixing arrangement on pole/wall/ or in feeder pillar and dismantling unserviceable switch complete all as specified. :- (a) MCB TP 32 Amps, 415 volts. Make (Leagrand/Havells/Schneider) -1 No (b) Digital timer having 24 hours to 7 days time setting with memory location. Make (Leagrand/L&T) -1 NO (c) Power contactor ML-3 three pole coil voltage 240 v Make (Leagrand/L&T) - 1 No (d) Complete wiring with suitable size of copper wire including necessary thimbles.

Earthing complete with galvanised steet earth plate electrode 600x600x6mm thick burried directly in ground (earth plate not less than 2.25mtr deep below normal ground level) with top edge of the plate not less then 1.50 mtr. below the normal ground level connected to galvanised earth lead strip 32 x 6 mm dia by means of bolts nuts check nuts & washer of galvanised iron or steel all as shown in electrical plate No 3 connected to earthing test point all as specified and testing on completion including the material and labour for :- (a) Excavation and earth work or drilling hole for electrode in any type of soil (b) PCC pit in cement concrete 1:2:4 TYPE B-1 (c) Pre cast RCC cover with suitable handle 40mm thick in PCC 1:2:4 reinforced with welded steel wire fabric (d) Funnel with watering pipe of GI 20mm nominal bore light grade and copper lugs etc all as specified. (e) 40mm nominal bore meduim grade GI protec-tion pipe 7.50 metre long for protection of earthing lead. (f) Requisite quantity of charcoal and common salt (g) Connection to earthing test point and testing on completion.

S&F MCCB wih thermal magnetic protection with enclosure and connections in panels or walls complete all as specified for 63A 3 pole 25ka all as specified and directed. Make: Legrand/ L&T/ Havells

S&F MCCB wih thermal magnetic protection with enclosure and connections in panels or walls complete all as specified for 100A 3 pole 25ka all as specified and directed. Make: Legrand/ L&T/ Havells

S&F MCCB wih thermal magnetic protection with enclosure and connections in panels or walls complete all as specified for 125A 3 pole 25ka all as specified and directed. Make: Legrand/ L&T/ Havells

S&F MCCB wih thermal magnetic protection with enclosure and connections in panels or walls complete all as specified for 200A 4 pole 25ka all as specified and directed. Make: Legrand/ L&T/ Havells

M&L for painting of LT/ Street light poles 9 to 11 mtrs long, scrubbing and removing of old paint and rust, applying two coats of red oxide primer and one coat of silver metallic paint including disconnecting of all connections and safety equipments complete all as specified and directed.

M&L for painting of LT panels inside and outside, scrubbing and finishing the surface, removinf rusty spots, applying red oxide primer and synthetic enamel paint including disconnections of all cables and subsequent connections complete all as specified and directed.

NOTE:- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs. 69,348.00]

Vaidehi E Link

Chinmaya Enteprises

M/S. ELECTROPOWER TECHNOLOGIES

Bidder Name

Paragon Electrotechnics

Chinmaya Enteprises

Vaidehi E Link

M/S. ELECTROPOWER TECHNOLOGIES