Tender for the work of increasing vertical clearance of existing 66kV Hebbala - ITI DC line to Pottery Road S/s passing near St. Charles School between tower no. 22 & 23 in St. Thomas Town, HBR Layout Bengaluru by providing 02 No of 66kV DDplus6 NBT KPTCL design tower, pertaining to TLM Hoody, under the jurisdiction of South Operation Circle, KPTCL Bengaluru

Tender for the work of increasing vertical clearance of existing 66kV Hebbala - ITI DC line to Pottery Road S/s passing near St. Charles School between tower no. 22 & 23 in St. Thomas Town, HBR Layout Bengaluru by providing 02 No of 66kV DDplus6 NBT KPTCL design tower, pertaining to TLM Hoody, under the jurisdiction of South Operation Circle, KPTCL Bengaluru

Check survey using their own equipment

110kV DD+6, NBT KPTCL design Tower. Fabricated Steel members for 66kV NBT KPTCL Design a)TowerDD type tower MS

c)Plus 6 Metres extension MS

d)Supply of galvanized Bolts & Nuts (For Tower body & +6 mtr extension)

110kV DD+6 with auxiliary cross arm[9 arm], NBT KPTCL design Tower. Fabricated Steel members for 66kV NBT KPTCL Design Tower. a) DD type tower MS

c)MS for auxiliary cross arm

d) Plus 6 Metres extension MS

e)Supply of galvanized Bolts & Nuts For Tower body and plus 6 mtr extension and additional cross arm

Setting of stub templates and aliging dismantling and transportation of templates from one location to another location

Sorting of Tower parts made of fabricated angle iron.

Supplying and fixing G.I. Angle iron 45 by 45 by 5 mm (1 m length) with cleats, bolt & nuts as per specification and fixing above 0.5 m length each at inner and outer surface of the tower to

Supplying and fixing Barbed wire as per specification.

Grounding of tower including the cost of 40 mm dia 2.5mm thick, class C GI pipe of 3 Mtr length with 50 x 6 mm GL flats 3 Mtr long, salt charcoal, including excavation charges.

Copper earth bond 300 mm

Rivetting of tower bolt ends by heating using dry-acetylene gas and hammering to destroy threads so as to make the tower members theft - proof

Welding of bolts & nuts

Drake ACSR for Plain Terrain

7/3.15 mm GI Wire for Ground conductor

Re-Stringing/Releasing: ( Existing Coyote) Paving out conductor from anchor to anchor normally spaced at 5 spans with 4 tangent towers in between, including providing stays at each anchor points and ...

Stringing: ( Existing Coyote & New Drake) Paving out conductor from anchor to anchor normally spaced at 5 spans with 4 tangent towers in between, including providing stays at each anchor points and jo...

Releasing of existing ground wire.(For 3 complete spans from Tower No.21 (Angle Tower) to Tower No.24(Angle Tower)

b) stringing of ground conductor 7/3.15 mm earth wire without allowing the conductor to touch the ground and without damaging the conductor.(For 3 complete spans from Tower No.21 (Angle Tower) to To...

INSULATOR STRINGS WITH CLAMPS, ARCING HORNS AND HARDWARE for Drake ACSR 90kN Disc Insulators.

Single tension clamps with Arcing horn for Drake ACSR

M S C Joints suitable for Drake ACSR

Repair sleeves suitable for Drake ACSR

Vibration dampers for Drake

Single tension clamps for Ground Conductor

PG Clamps for Ground Conductor

C Type Wedge Connector Coyote-Drake ACSR

Dismantling existing (a)66kV SB+0 [Tower No.23] (b)66kV 4-Pole Structure [Tower No.23

Excavation for line tower foundation Normal Soil- Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and s...

Dry Fissured/Ordinary Rock: Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in ...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS C...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS C...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

Back filling and levelling with available soil

Dismantling dressed stone work ashlar face stone work, marble work or precast concrete work manually/ by mechanical means including stacking of serviceable and disposal of unserviceable material to th...

Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such similar works in all kinds of soils, as per dra...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)

Providing Flush / Ruled/ Struck or weathered pointing on brick work or brick flooring with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining, including cost of mat...

Providing and laying in position plain cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m hei...

Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includi...

Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 g/L and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shad...

Size stones from dismantled SSM masonry