Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹37.3 LAccepted-AOC | L-1 | Accepted-AOC Being lowest bidder | |
| 2 | L-2₹40.3 L+₹3.0 L (7.96%)Rejected-Finance | L-2 | Rejected-Finance other than lowest bidder | |
| 3 | L-3₹40.3 L+₹3.0 L (8.06%)Rejected-Finance 106 1 RAJA RAMMOHAN SARANI KOLKATA 700 009 | KOLKATA | WEST BENGAL | 700009 | L-3 | Rejected-Finance other than lowest bidder | |
| 4 | L-4₹41.1 L+₹3.8 L (10.2%)Rejected-Finance | L-4 | Rejected-Finance other than lowest bidder | |
| 5 | L-5₹42.2 L+₹4.9 L (13.2%)Rejected-Finance 51 1 FULBAGAN ROAD BAGHAJATIN KOLKATA 700086 WEST BENGAL | KOLKATA | WEST BENGAL | 700086 | L-5 | Rejected-Finance other than lowest bidder |
| Sl No | Description | Qty | Unit | BHASKAR SUPPLY AGENCY L3 | ESS PEE UDYOG L1 | A S ENTERPRISE L2 | PUTUL CONSTRUCTION CO. L4 | NUPUR CONSTRUCTION L5 | KT CONSTRUCTIONS L6 |
|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Excavation in trenches n. exc 1.5 mtr wide and n. exc 1.5 mtr deep for foundation etc. n. exc 10 Sqm on plan and n. exc 1.5 mtr deep and getting out in hard/dense soil complete all as specified and directed. | 24 | Cum | 400 ₹9,600 | 375 ₹9,000 | 380 ₹9,120 | 375 ₹9,000 | 382 ₹9,168 | 317 ₹7,608 Lowest |
| 2.00 | Returning filling including spreading, leveling, watering in layers n. exc. 15cm in any type of soil complete all as specified and directed. | 8 | Cum | 190 ₹1,520 | 160 ₹1,280 Lowest | 177 ₹1,416 | 200 ₹1,600 | 175 ₹1,400 | 195 ₹1,560 |
| 3.00 | Removing excavated soil to a distance exc. 50 mtr and n. exc 250 mtr from starting point complete all as specified and directed. | 16 | Sqm | 397 ₹6,352 | 395 ₹6,320 Lowest | 400 ₹6,400 | 395 ₹6,320 Lowest | 419 ₹6,704 | 410 ₹6,560 |
| 4.00 | Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, in soft/loose soil complete all as specified and as directed. | 40 | Each | 418 ₹16,720 | 400 ₹16,000 Lowest | 400 ₹16,000 Lowest | 426 ₹17,040 | 413 ₹16,520 | 438 ₹17,520 |
| 5.00 | M&L for PCC (1:4:8) type D2 using 40mm graded stone aggregate as in foundation complete all as specified complete all as specified and directed. | 15.5 | Cum | 6,050 ₹93,775 | 5,940 ₹92,070 Lowest | 6,100 ₹94,550 | 5,995 ₹92,922.5 | 6,180 ₹95,790 | 6,045 ₹93,697.5 |
| 6.00 | M&L for formwork to flat rough finished surfaces of concrete sides of foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed. | 85 | Sqm | 340 ₹28,900 | 330 ₹28,050 Lowest | 350 ₹29,750 | 345 ₹29,325 | 388 ₹32,980 | 390 ₹33,150 |
| 7.00 | M&L for formwork for rough finished surfaces of concrete to sides of pillars, posts, piers, coloumns and stanchions complete all as specified and directed. | 12 | Sqm | 390 ₹4,680 | 380 ₹4,560 Lowest | 385 ₹4,620 | 400 ₹4,800 | 411 ₹4,932 | 402 ₹4,824 |
| 8.00 | M&L for RCC type B1 (1:2:4) (20mm graded stone aggregate) Nominal mix as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed. | 5 | Cum | 7,300 ₹36,500 | 7,000 ₹35,000 Lowest | 7,600 ₹38,000 | 7,250 ₹36,250 | 7,500 ₹37,500 | 7,600 ₹38,000 |
| 9.00 | M&L for RCC type B1 (1:2:4) (20mm graded stone aggregate) Nominal mix as in coloumns, pillars, piers, posts and struts complete all as specified and directed. | 3.5 | Cum | 7,400 ₹25,900 | 7,300 ₹25,550 Lowest | 7,350 ₹25,725 | 7,300 ₹25,550 Lowest | 7,450 ₹26,075 | 7,500 ₹26,250 |
| 10.00 | M&L for mild steel TMT bars of 10mm dia and over cut to length bent to shape required including cranking bending spirally for hooping for column, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia complete all as specified and directed. | 1,250 | Kg | 118 ₹1,47,500 | 100 ₹1,25,000 Lowest | 111 ₹1,38,750 | 120 ₹1,50,000 | 125 ₹1,56,250 | 117 ₹1,46,250 |
Tender Value
₹36.5 L
EMD Value
₹72,900
Closing Date
30 Jul 2025, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer, Alipore
NO 1 NATIONAL LIBRARY AVENUE, ALIPORE, KOLKATA 700027
PROVN OF STORAGE SHED IN COMPLAINT CELL B/R AT CH (EC) AND PROVN OF COVERED SHELTER INCLUDING MINOR CIVIL WORKS AT REAR SIDE OF BLDG NO P-94 AT COMD HOSP (EC) UNDER GE (A) KOLKATA
2025_MES_719455_1
GE/ALP (8498) KOLKATA OF 2025-26
Open Tender
Civil Works
Item Rate
120 days
GE Alipore
CLASS D AND CATEGORY a(i)
9 documents required · 9 mandatory
₹500
Garrison Engineer, Alipore
₹72,900
Yes
GE Alipore, Kolkata
14 Oct 2025
9 Jul 2025
6 Aug 2025
9 Jul 2025
30 Jul 2025
23 Jul 2025
9 Jul 2025 - 16 Jul 2025
17 Jul 2025
Amount
Excavation in trenches n. exc 1.5 mtr wide and n. exc 1.5 mtr deep for foundation etc. n. exc 10 Sqm on plan and n. exc 1.5 mtr deep and getting out in hard/dense soil complete all as specified and directed.
Returning filling including spreading, leveling, watering in layers n. exc. 15cm in any type of soil complete all as specified and directed.
Removing excavated soil to a distance exc. 50 mtr and n. exc 250 mtr from starting point complete all as specified and directed.
Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, in soft/loose soil complete all as specified and as directed.
M&L for PCC (1:4:8) type D2 using 40mm graded stone aggregate as in foundation complete all as specified complete all as specified and directed.
M&L for formwork to flat rough finished surfaces of concrete sides of foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed.
M&L for formwork for rough finished surfaces of concrete to sides of pillars, posts, piers, coloumns and stanchions complete all as specified and directed.
M&L for RCC type B1 (1:2:4) (20mm graded stone aggregate) Nominal mix as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.
M&L for RCC type B1 (1:2:4) (20mm graded stone aggregate) Nominal mix as in coloumns, pillars, piers, posts and struts complete all as specified and directed.
M&L for mild steel TMT bars of 10mm dia and over cut to length bent to shape required including cranking bending spirally for hooping for column, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia complete all as specified and directed.
M&L for mild steel TMT bars of 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders cut to length bent to shape required including cranking bending spirally for hooping for column, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia complete all as specified and directed.
S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 22.5 cm to 30 cm long (dia of neck 16 mm to 20mm) complete all as specified and directed.
S&F Steel work in tubular trusses, posts,rafters, struss etc including special shaped washers etc. complete using ERW or induction butt welded tubes incl preparation surfaces and applying one shop coat of Zinc chromate primer paint etc complete all as specified and directed.
S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe-410-W (Gde-E-250) quality-B complete all as specified and directed.
S&F framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 (Brackets over 10 kg each to be measured under 'Structural Steel') complete all as specified and directed.
S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing complete conforming to Fe-410-W (Gde-E-250) quality-B complete all as specified and directed.
S&F Pre painted galvalume aluminium zinc coating GI based corugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed.
S&F Pre painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall/valley gutter fixed with self tapping screws complete all as specified and directed.
M&L for two coats of synthetic enamel paint over a coat of red oxide on new steel surfaces of any description, not otherwise described over 10cm width or grith after preparation complete all as specified and directed.
Material and labour for brick work Brickwork with sub- class ‘B’ bricks straight or curved on plan exc 6 m mean radius, built in cement mortar (1:6) complete all as specified and directed.
M&L for brick work with with sub- class ‘B’ straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4) complete all as specified and directed.
M&L for 15mm thick plastering on fair faces of brick wall and concrete surfaces in cement mortar (1:6) surface finished even and fair complete all as specified and directed.
M&L for applying Finishing walls in new surfaces with Acrylic Smooth exterior paint of required shade : New work (Two coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete in all respect as specified and directed.
Demolition of PCC in ground floor and pavings not exc 15 cm thickness below or above ground level complete all as specified and directed.
M&L for 25mm thick PCC (1:2:4) type 'B-0' using 12.5 mm graded crushed stone aggregate as in sub base complete all as specified and directed.
M&L for Machine cut kota stone slab flooring (20-25)mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete, including over 20 mm thick screed bed in cement mortar (1:6) complete all as specified and directed.
M&L for 100 mm thick cement concrete type C2,(1:3:6) (using 40 mm graded stone aggregate) as in floors complete all as specified and directed.
Hard core of gauge in exc. 63mm broken stone boulders deposited and spred and leveled in layers in.exc. 15mm thick complete all as specified and directed.
M&L for plain cement concrete (1:2:4) type B1 using 20mm graded stone aggregate as in , coping, etc., including necessary form work complete all as specified and directed.
Surface dressing n exc 15 cm deep and getting out in loose/ soft soil complete all as specified and directed.
M&L for 60 mm thick machine pressed precast interlocking paver block any shape and size with grey cement and no pigment confirming to IS 15658-2006 complete all as specified and directed.
M&L for Chequered cement concrete tiles (20cm x 20cm x 25mm) thick,set, jointed and pointed in neat cement slurry in floors with grey cement in equal proportion & no pigment over 15mm thick screed bed with cement mortar (1:6) complete all as specified and as directed.
M&L for Moorum/red bajri filling in floors are paning laid in layer n exc 15cm thick, spread levelled and rammed including watering complete all as specified and directed.
M&L for sand filling under floor or in floor or paving, laid in including watering and consolidation true surface for laying paver block complete all as specified and directed.
M&L for PCC (1:2:4) type B2 using 40mm graded stone aggregate as in foundation complete all as specified and directed.
M&L for RCC M 25 Nominal mix (using 20 mm graded stone aggregate) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.
Taking down cement plaster on brick or stone wall surfaces including glazed tiles wherever exists including raking out joints, hacking for key and scrubbing down with water complete all as specified and as directed.
M&L for 15mm thick plastering on fair faces of brick wall and concrete surfaces in cement mortar (1:4) surface finished even and fair complete all as specified and directed.
M&L for preparing surfaces new decorated plastered or unplastered surfaces of wall, pillasters, cornices etc and applying two coat of acrylic distemper with wall care putty complete all as specified and as directed.
Demolition of brickwork or stone boulder masonry, built in cement mortar or cement lime mortar including all quoins,arches, pillars,etc. but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.
M&L for brick work with fly ash bricks straight or curved on plan to any radius in half brick thick walling built in cement mortar (1:6) complete all as specified and directed.
M&L for brick work with fly ash bricks straight or curved on plan exc 6m mean radius, in cement mortar (1:4) complete all as specified and directed.
Taking down of Chowkhat with shutter (without taking of shutter) area n. exc 1.5 Sqm complete all as specified and directed.
S&F Anodised powder coated aluminium (minimum thickness of powder coating 50 micron) frame for doors, windows, ventilators etc with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.
S&F Anodised aluminium powder coated door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed.
S&F stainless stell sliding door bolts 300mm long with hasp stapple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bots and sliding bolts complete all as specified & as directed. Make : Cat Part No SLD-1212 of make in Prayag or equivelant make as approved by GE
S&F Stainless Steel tower bolts with squre type of extruded section with 200 mm long bolt, complete all as specified & as directed. Make : Cat Part No TBS-2250 of make in Prayag or equivelant make as approved by GE
S&F Hinges 100 mm, cast brass, with Stainless steel hinge pin, bright polished and fixed, complete all as specified and directed. Make : Cat Part No HG2319 of make in Parayg or equivelant make as approved by GE
S&F 125 mm long Aluminium handles, cast type, anodised complete in all respect as specified and directed.
M&L for 100 mm thick cement concrete type C2 (1:3:6) (using 40 mm graded stone aggregate) as in floors complete all as specified and directed.
M&L for 75mm thick PCC (1:3:6), type C2, using 40mm graded stone aggte as in plinth protection / paving, surfae finished even & smooth with using extra cement as complete all as specified and directed.
A S ENTERPRISE (BID ID -3373696)
BHASKAR SUPPLY AGENCY (BID ID -3373277)
PUTUL CONSTRUCTION CO. (BID ID -3374718)
NUPUR CONSTRUCTION (BID ID -3374963)
KT CONSTRUCTIONS (BID ID -3375619)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .