Renovation of Gym/Swings and repairing work in Children Park in ward no 24 at MC Kaithal (RECALL)

providing anfixing sprode next generation entertainment jmgo lego 01 pro ultra short throw smart projector 1080/4k 1500ansi lumens led dlp movie projector with speakers

Pull Chair Providing, designing and fixing of Pull chair of size 2500 X 800 X 2000 mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber at top end. Padals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmentally friendly. Bearing used shall be maintenance free, duly oiled sealed and self-lubricated made by reputed company to be approved by Engineer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc

Air Walker Providing, designing and fixing of Air-Walker of size 100 x 550 x 1480mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick made up of hot rolled tubular steel and hot dipped galvanized, and powder coated 80-120 micron thick using Akzo Nobel or equivalent in desired shade and colour. All welding joints of pipe shall be robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Base plate cover shall be made up of virgin LLDPE plastic by rotational moulding with minimum 4.00mm thickness U V resistant and colour as approved by Engineer-in Charge. High quality grip rubber should be used on handles. Foothold shall be made of Nylon alloy with rounded edge to prevent impact and injury. Maintenance free bearing should be used in equipment manufactured by reputed company duly sealed and self-lubricated to be approved by Engineer in charge. Equipment to be fitted with inbuilt limiters. The equipment should be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour (of metal, seat and pedal), and fixing of equipment etc.

Arm Wheel Providing, designing and fixing Arm Wheel in a pair of size 850 X 800 X 1800 mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber. Padals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and selflubricated made by reputed company to be approved by Engineer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc

Twister Providing, designing and fixing Twister of size 1700 X 1300 X 1300 mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80- 120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber. Foothold shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colorful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Engineer-in- Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc.

Chain Swing double Supply and fixing of Chain Swing double of made of 14 gauge MS sheet, area 4m x 4m, chain thickness 6-8MM, main cross bar 50mm pipe, Cross Bar 40mm NB pipe, Seat belts type, length 3Meter, height 2.40 Meter, bearing bush type or ball bearing capacity 2children. The supplier must confirm the quality standard such as DIN and EN. The Equipment supplier must have ISO 45001 certification for Health and Safety Management System and for Quality standard manufacturing unit must have ISO 9001 certification. Al sizes plus -5% variations will be accepted.

Providing and fixing of 1.5-ton split air conditioner three star with stabilizer make voltas, LG, Daikin, O-General etc as per specification. Rate are taken from Purchase department work order no. MCF/EE-P/2022/100 dated 14.09.2022

Providing and fixing of inverter (1700 VA) with two nos. bettery 150/160 Amp. Make microtek, Luminious, amaron etc as per specification.

Single sea saw: Supply and fixing of single Sea-saw of made of 14 gauge ms sheet I meter main frame 50mm NB pipe plank 40 mm NB pipe seat 14 gauge ms sheet capacity 2 children. The supplier must confirm the quality standard such as din and en . The equipment supplier must have iso 45001 certification for health and safety management system and for quality standard manufacturing unit must have iso 9001 certification. All sizes plus minus 5% variations will be accepted.

PA Ahuja amplifier

PA Horn Speaker

Coxial Speaker Cable

PAn Drive

AUX Cable

CO Speakers ahuja 200watt 5 feet height

Supply, Installation, Testing and Commissioning of Horizontal Submersible Pumping set with C.I.volute, CI Impeller and SS Shaft with mechanical seal, connected to a TEFC induction motor suitable for 400/400 volts, 3 Phase 50 cycles A.C. Supply, 2900 rpm, Pump 1.5HP.ion Make/ Brand:- Crompton/ Kirloskar/ KSB

Push Up And Dip Bar:- Providing, designing and fixing of exercising bar in a pair of size 1802 x 612 x 1399 mm fabricated with main post of 140 mm dia and 3.00 mm thick and rest of the pipes 2.75 mm thick yellow sleeve is dia 159mm thickness 8.00 mm, parallel bar dia 42 mm 2.75mm, rest pipe is thickness 2.75mm, having bottom plate 260 mm dia with thickness 12.00 mm with ABS cap/ cover. all pipes made up of hot rolled tubular steel and pre galvanized, having oil degreasing treatment and sand blasting de-rusting treatment must be used before powder coating treatment with baking temperature of more than 200 degree celsius using high quality paint nippon or equivalent of 80 - 120 micron thickness. All joints of pipe should be cut by CNC laser cutting and robotic welded, with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. The equipment must confirm the quality standards such as DIN 79000 and EN 16630. The equipment must have TUV certification in the manufacturing process. The equipment shall be fixed on ground with concrete of minimum strength M -25 with J-bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover, (Including concrete base of size- 0.45 x 0.45 x 0.60 M). All complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc.

Waist Trainer :- Providing, designing and fixing twister of size: 1365× 1708 x 1292 mm fabricated with main post of 140 mm dia and 3.00 mm thick and rest of the pipe 2.75mm, yellow sleeve dia 159mm thickness 8.0mm,handle beam is dia 33 thickness 2.75mm, Under plate pipe is dia 48 mm thickness 2.75mm, having bottom plate 260 mm dia with thickness 12.00 mm with ABS cap/ cover , all pipes made up of hot rolled tubular steel and pre galvanized, having oil degreasing treatment and sand blasting de-rusting treatment must be used before powder coating treatment with baking temperature of more than 200 degree celsius using high quality paint nippon or equivalent of 90 - 120 micron thickness. All joints of pipe should be cut by CNC laser cutting and robotic welded, with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Foothold shall be made up of steel 4.00 mm thick , with rounded edges to prevent any impact of injury and welded/attached to main structure for vandalism proof design and long life. Bearing No 6205 used shall be maintenance free, duly oil sealed and self-lubricated made by reputed company to be approved by Engineer in charge. Equipment to be fitted with inbuilt limiters to prevent unwanted movement. All open ends of pipe to be closed by steel/LLDPE caps for user safety. The Equipment must confirm the quality standards such as DIN 79000 and EN 16630.The equipment must have TUV certification in the manufacturing process. The equipment shall be fixed on ground with concrete of minimum strength M -25 with J-bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover, (Including concrete base of size- 0.45 x 0.45 x 0.60 M). All complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc.

Leg Stretcher:- The main frame of leg stretcher hall consist of 80 NB G.I. pipes with two suitably designed brackets attached on it. Brackets have to be made of M.S. material with G.I. plating. The moving frame oflLeg press is to be made of 40NB G.I. pipes which is to be mounted to the main frame with the help of suitably designed, machined shaft and bearing housing. Bearings used are to be of oil sealed, self-lubricating. Make of bearing shall be as per approved make list. Foot rest is to be hinged to the main frame with the help of suitably designed G.I. plated clamp and 25 NB G.I. pipes. Gusset plates have to be provided to give extra strength to foot rest. Foot rest is to made of high quality HDPE material. Suitably designed HDPE pads has to be provided at the bottom of moving frame. Seat and back rest provided has to be made of HDPE.. All pipes are to be uniformly powder coated up to minimum 60 micron thickness to avoid corrosion. All open ends of pipe is to be close by GI/HDPE caps for user safety against entrapment. The equipment shall be fixed on ground with concrete of minimum strength M -25 with J-bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover, (Including concrete base of size- 0.45 x 0.45 x 0.60 M). All complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc

Horse Rider Station :-Providing, designing and fixing of horse rider station of size 1000 x 600 x 1100 mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using akzo nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Padals shall be made up nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Engineer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment shall be fixed on ground with concrete of minimum strength M -25 with J-bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover, (Including concrete base of size- 0.45 x 0.45 x 0.60 M). All complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc.

Elliptical Exerciser:- Providing, designing and fixing elliptical exerciser of size 1200 X 540 X 1600 mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using akzo nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber. Padals shall be made up of nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and UV resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Engineer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment shall be fixed on ground with concrete of minimum strength M -25 with J-bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover, (Including concrete base of size- 0.45 x 0.45 x 0.60 M). All complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc.

Rowing Machine:- Providing, designing and fixing rowing machine of size 1280 X 800 X 1500 mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using akzo nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber. Foothold shall be made up of nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and UV resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Engineer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment shall be fixed on ground with concrete of minimum strength M -25 with J-bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover, (Including concrete base of size- 0.45 x 0.45 x 0.60 M). All complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc.

Supply, Installation, Testing and Commissioning of Horizontal submersible Pumping set with C.I.volute, CI Impeller and SS Shaft with mechanical seal, connected to a TEFC induction motor suitable for 400/440 volts, 3 phase 50 cycles A.C. Supply, 2900 rpm, Pump 5HP Make/ Brand:- Crompton/ Kirloskar/KSB

Supply and Installation of SKY Walker Gym Machine size 114MM DIA 2.5 mm thik pole height 3-5 feet color red and darkyellow Manual Material Mild Steel i Epoxy coated Complete with all respect.

Providing and fixing ground level Duck Spring Rider with all necessary items including preparation of foundation, Age Group- 6 To 12 Years. Safety Play Area - 2 * 3 ft, H=2 FT, FRP Duck, Spring, Pipe= 75 MM, 60 MM AND 50 MM, 14 gauge apolio Pipe ISI Mark. Two Coat Colour Aspa Paint. All complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc

Supply and fixing of Straight Slide Slider should be made of HDPE (Pipe) of ID 40 and OD 50 with nylon bush (mat finish) of demanded colour. With structural parts GI pipes and MS steel (including cutting, fitting, welding, Bolting and smooth grinding etc. complete. All the structural parts shall be polyester powder coated having min. thickness of 50 micron. High quality fastened complete with supply/fixing and installation to ground including civil work for making base and pedestals. All complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc

Seated Chest Press-Providing, designing and fixing seated chest press of pull pair of size 1800 X 700 X 2000 mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using akzo nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber. Padals shall be made up of nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and UV resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Engineer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment shall be fixed on ground with concrete of minimum strength M -25 with J-bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover, (Including concrete base of size- 0.45 x 0.45 x 0.60 M). All complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc

Sit Up Board-Providing, designing and fixing of single sit -up station of size 1504 x 1133 x 624 mm fabricated with main post of 140 mm dia and 3.00 mm thick ,yellow sleeve dia 159 mm thickness 8.0mm, connecting pipe dia 33 mm thickness 3.0mm and rest of the pipes are 2.75 mm thick,having bottom plate 260 mm dia with thickness 12.00 mm with ABS cap/ cover,all pipes made up of hot rolled tubular steel and pre galvanized, having oil degreasing treatment and sand blasting de-rusting treatment must be used before powder coating treatment with baking temperature of more than 200 degree celsius using high quality paint nippon or equivalent of 90 - 120 micron thickness. All joints of pipe should be cut by CNC laser cutting and robotic welded, with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Seat shall be made up of steel pipe 2.75mm thick , with rounded edges to prevent any impact of injury and welded/ attached to main structure for vandalism proof design and long life. All open ends of pipe to be closed by steel/ LLDPE caps for user safety. The equipment must confirm the quality standards such as DIN 79000 and EN 16630. The equipment must have TUV certification in the manufacturing process. The equipment shall be fixed on ground with concrete of minimum strength M -25 with J-bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover, (Including concrete base of size- 0.45 x 0.45 x 0.60 M). All complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc.

Arch swing: - i. FRP Coated Frame and Structure • Type: Arch frame, single bay (2-seater) • Material: ISI grade MS (mild steel) pipes. • Pipe OD (arch legs): 80 mm (min.) × 3.0 mm thickness • Top cross beam: 80 mm OD MS pipe × 3.0 mm thickness • Arch shape: Radius : 1 mtr (depending on bay width) ii. Dimensions • Height (ground to top beam): 2.6 – 3.0 m (recommended 2.8 m) • Seat clearance from ground (at rest): 350–500 mm • Distance between two swing seats (side-to-side): Minimum 600–750 mm iii. Swing Seats • Material: FRP • Type: Flat seat (for 5–12 yrs) • Size: 400–450 mm × 200–250 mm • Load capacity per seat: 80–120 kg iv. Chains / Ropes • Type: Galvanized / stainless-steel chain with plastic/rubber coating (pinch-free) as desired by Engineer in-charge • Chain thickness: 6–8 mm • Length: 1.6 - 1.8 m (adjustable for seat clearance) • Connection: Heavy-duty D-shackles or clevis connectors with anti-theft nut/bolt. v. Safety Zone and Surfacing • Impact area: At least 2.0 m front and back, 1.75 m side clearance per swing. • Fall height: 1.5 – 1.8 m vi. Load Capacity and Stability • Single bay (2 seats): Total ~200 kg • Multi-bay: Each bay must be independently anchored • Foundation: RCC footing per arch leg, size 300 × 300 × 600 mm depth with anchor bolts vii. Age Group Suitability • Toddlers (2–5 yrs): Bucket seat with harness. • Kids (5–12 yrs): Flat belt/FRP seat

Multi Play Station: - i. General Structure • The Multi Play Station shall be modular in design and suitable for outdoor use. • Structure shall be designed for 25–30 children at a time, aged 5–12 years. ii. Material • Main Frame with FRP Coated: Mild Steel (MS) tubular sections, minimum 90,75,48,34, mm dia, 2.5 mm thick, FRP coated. • Platforms: Made of FRP (Fiber Reinforced Plastic) with anti-skid design. • Slides: FRP with smooth finish, minimum thickness 6 mm. • Climbing Frames: MS/FRP with anti-slip grips. • Roof/Canopy: FRP with UV-stabilized coating. • Fasteners: Galvanized / PLATING MS BOLT / SS bolts/ with safety caps. iii. Activities/Components Covering Area: 44` L X 22` W It contains: • FRP Spiral Slide 6mm thick inclined at 5` H - 1 no • FRP Tube Slide inclined at 5’ H - 1 no • FRP Bowl slide 6mm thick with FRP Entry Gate inclined at 3` H - 1 no • FRP Wave slide 6mm thick inclined at 5’ H - 1 no • FRP Stair 3mm thick inclined at 3`H-1 no • FRP Platform Hex. Shape 5mm thick in 7` Dia-2 no. • FRP ??n???-2 no. • FRP Diamond shape with MCF wording Engraved on canopy-2 n?. • FRP Fancy Railing Frog and Monkey Shape-4 no. • FRP Walking Bridge 7.5` Long-1 no. • M.S Spring Climber - 1 no. • M.S Zig-Zag Climber - 1 no • M.S Chain Net Climber - 1 no • M.S Climbing Ladder - 1 no • M.S Station in which vertical MS pipe-FRP Coated is of 3 `12 Guage of 1.S.I Mark-2 no • Parent–Child Face-to-Face Swing: - It allows an adult and a child to swing together, facing each other, on a single moving frame- Heavy-duty MS FRP Coated structure, ISI grade, FRP coated for corrosion protection. Pipe OD 75 mm (min.) × 3.0 mm thickness. Approx. L 10’ × W 6’ × H 8.5’. Dual-seat assembly with pivot arms that keep the adult and child seats facing each other. Heavy-duty bearings or self-lubricating bushes for smooth motion. Full-bucket seat with safety belt (infant/toddler) or FRP half-bucket for older children. Enclosed pivot hardware, anti-wrap bearings, rounded edges. Foundation with 1:2:4 RCC concrete blocks (minimum 400 × 400 × 600 mm), as per manufacturer’s design. Installation to be done with proper grouting and alignment-1 no. iv. Dimensions (Indicative – may vary slightly as per design) • Overall, Area: Minimum 44’ L x 22’ W • Platform Height: 4 ft. • Slide Length: 8–10 ft (2.5–3 m). • Tunnel Diameter: Minimum 650 mm. v. Safety Features • No sharp edges, corners rounded. • Safety guardrails (minimum 900 mm high) at all elevated platforms. • Adequate spacing between activities to prevent collision. • All equipment installed over soft ground/rubber flooring/sand bed. vi. Finishing • FRP coating / PU PAINT with non-toxic, lead-free colors. • FRP to be UV-stabilized, weather resistant. • Minimum 2-year warranty against rusting and color fading.

Providing and fixing of ss dustbin with specification :- Type of Bin 2 Bin mounted with 3 pole Shape of bin Cylindrical Capacity of each Bin (container) (in Liters) 60 Material of Pole with stand and container (Bin) Stainless Steel Grade 202 Pole diameter (in mm) 39-42 Pole height (in mm) 600-699 Pole pipe thickness (in mm) 6 Container wall thickness (in mm) 1 Perforation Perforated Type of Lid on container Flip Flop Type of Container Swing type Copies of test reports and certifications to be furnished to buyer on demand at time of supplies yes Excluding GST Including Transportation, Fixing,Labour at site and all other charges.

Repair of Jhulla `Multi Activity Play System `, Complete in all respect to the satisfaction of Engineer-in-Charge (Including all Taxes) Required material/ equipments for repair work detail is as under:-Paint of Jhulla (Powder Coated)

FISHY FUNNY SEE SAW Main Structure Material: Galvanised Steel (GI) ERW Pipes ISI Marked IS1239 Minimum 90 mm outer diameter (OD), 2.0–3.0 mm thickness Surface Finish Zinc primer plus outdoor-grade polyester powder coating(min. 60 – 80 microns), Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine. Handle and Leg rest Material: Galvanised Steel (GI) ERW Pipes ISI Marked IS1239 Minimum 25 mm outer diameter (OD), 2.0–3.0 mm thickness Surface Finish Zinc primer plus outdoor-grade polyester powder coating(min. 60 – 80 microns), Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine. Seat : designed for outdoor playgrounds. Crafted from durable 3 layer HDPE sheets 20 mm thik and precision router-cut for Spring: Heavy-duty coil spring, High-carbon steel or alloy spring steel, 18 mm – 20 mm wire thickness, Coil height: Approx. 300 mm.

Recessed mounted 36W LED 2`x2` lighting fixture

Percentage BoQ

BoQ_Ver3.0

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

All HSR ITEM (SEE IN DNIT)

Please Enable Macros to View BoQ information