REPAIR/ MAINT OF PIPE LINE, VALVES, CONNECTED WORKS OF WATER SUPPLY IN TECH AREA AT AFS CHAKERI KANPUR

Amount

Taking up/ down of 15 mm bore steel tubing and connections from excavated trenches and building up to tripple storey with due care including removal from site complete all as specified and directed.

All as per item No 1 but size 20mm bore

All as per item No 1 but size 25mm bore

All as per item No 1 but size 40mm bore

All as per item No 1 but size 50mm bore

Re-fixing old steel tubing and connection in new or old position in trenches/wall/ ceiling/ floors etc with using new fittings complete as directed of sizes 15mm bore

All as per item No 6 but size 20mm bore

All as per item No 6 but size 25mm bore

All as per item No 6 but size 40mm bore

All as per item No 6 but size 50mm bore

Taking up/down cast iron water main 100 mm bore (including all fitting) with spigot and socket end and joints including burning out joints and recovering lead complete all as specified and directed.

All as per item No 11 but size 150 mm bore.

All as per item No 11 but size 200 mm bore.

All as per item No 11 but size 250 mm bore.

Relaying old CI pipe in new or old position of size 100 mm hereinbefore including cleaning of pipes , cutting to required length etc. as per site requirement by using previously used and additional run lead , spun yarn including caulking to make the joints water tight complete all as specified and directed.

All as per item No 15 but size 150 mm bore.

All as per item No 15 but size 200 mm bore.

All as per item No 15 but size 250 mm bore.

M & L for GI pipe medium grade , ISI marked with all necessary fittings laid in trenches / floor /wall or cealing of size 15mm bore. -Make : Jindal/Tata/Prakesh/ surya/Zenith Note : 1) Rate quoted deemed to be inclusive of fittings required, taking up/ down of old pipe line will be measured and paid under seperate item. 2) Earth work will be measured and paid seperately under relevant item

All as per item No 19 but size 20mm bore

All as per item No 19 but size 25mm bore

All as per item No 19 but size 40mm bore.

All as per item No 19 but size 50mm bore.

All as per item No 19 but size 80mm bore.

M&L for centrifugally cast (spun) ductile iron pressure pipes 100 mm bore, for water with socket & spigot ends confirming to IS 8329/2000 in any length for classification of K7 suitable for rubber gasket push on with cement mortar lining inside the pipe with outside zinc coating as per IS 8329/2000 complete all as specified and as directed .Make Electro steel/Jindal / TaTa / Jai Balaji . Note :- 1) Rate quoted by the contractor deemed to be inclusive of rubber gasket joint. 2) Taking up of old pipe line will be measured and paid under relevant item

All as per item no 25 but size 150mm bore

All as per item no 25 but size 200mm bore

All as per item no 25 but size 250mm bore

Dismantling and taking up or down unserviceable / cracked U PVC tubing and fittings with all fittings including stop valves or gate valves of the following sizes complete , 15 mm dia

All as per item No 29 above but, 20mm dia

All as per item No 29 above but, 25mm dia

Excavation in trenches not exceeding 1.0 m wide and not exceeding 1.0 m in depth and getting out for taking out/laying pipes in soft/loose soil complete all as specified and directed.

Returning, filling,including spreading levelling watering and well ramming in layers not exceeding 25cm thick in solf/loose soil after pipes are laid complete all as specified and directed .

Removing of excavated material not exc 50 mtr distance and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed.

Laying, jointing and leakage testing of 'U' PVC Pipe including supply and fixing of all fittings such as bend, tee, elbow, union, reducer etc, laid in trenches / floor/ walls etc all as specified and as directed at site of the following sizes (a) 15 mm dia :- Notes : (i) The laying and jointing of pipes are required to be carried out in short / long streches catering to specific requirements of a purticulular building.Make-Finolex/Supreme or equivalent

All as per item No 35 above but, 20 mm dia

All as per item No 35 above but, 25 mm dia

S&F 'U' PVC ball valve for 'U' PVC pipe of the following size 15 mm bore.

All as per item No 38 above but, 20 mm Bore

All as per item No 38 above but, 25 mm Bore

Supply & fixing in replacement of Gun metal Gate valve ISI marked with Iron wheel, head screwed both ends for Galvanised Iron pipe for sizes 15mm bore:-Make Zoloto/Sant/Kartar

All as per item No 41 but size 20mm bore

All as per item No 41 but size 25mm bore

All as per item No 41 but size 40mm bore.

All as per item No 41 but size 50mm bore.

Supply & fixing in replacement sluice valves 250 mm dia class PN-1.0 , IS-14846 with flanged ends, stainless steel spindle and iron wheel including nut bolts and rubber packing complete Make Kirloskar /Upadhaya /Kartar

All as per item no 46 but 200mm bore

All as per item no 46 but 150mm bore

All as per item No 46 but 100mm bore

All as per item No 46 but size 80mm bore

S & F in replacement MS Column pipe screwed 150 mm dia 3 mtr long having wall thickness not less than 7.10 mm ERW , with MS angle heavy duty on both sides confirming to IS 6392 with provision of 08 nos. Holes welded all around with pipe for rigidness and 4 nos. Ribs 10 mm thick including 2 mm thick rubber sheet and steel nut and bolts 10 mm dia of suitable lengths and washers shall be confirming to IS 4272 table. NOte : Rate quoted shall deemed to be inclusive of lifting of existing column pipe from bore and fixing of new column pipe at position complete with necessary nut bolt, packing, etc as required

S & F float and board type water level indicator with a balance counter weight system with an arrow shaped pointer which smoothen the indication process for the over head tank height up to 25RM, Weather proof Scale Board (SS 304 & Pure Polyster Powder Coated Alimnium ) and Radium Visibility from longer distance complete including testing & commissioning complete all as specified and directed by Engineer in Charge. Make: Optic/SAPCON/AQUABRIM

Supply, installation, testing and commissioning in replacement of Submersible pump set electric driven, ISI marked, , pump with bronze impellars, CI casing, with ss shaft, leaded bronze bearings, / bushes , complete all as per IS- 8034 with copper wound submersible motor suitable for 415 Volts , 3 phase, 50 Hz supply of suitable HP, stain less steel tubing as per IS-9283 of 2013 ( suitable for 200 mm dia borewell ) with Head 90-96 mtrs and discharge 1400-1500 LPM, 4 stage complete Make- KSB or equivalent. Note : Old pump shall be deposited to MES store.

S & F in replacement of Electric cable for submersible pump set, flat 16 Sqmm 3 core stranded copper conductor PVC sheathed cable all as specified and directed. Make- Finolex/ Polycab/Havells/ Plaza. Note : Old cable shall be deposited to MES store yard

M&L for cast iron fittings such as bends tapers to pieces( Single or double) branch pieces any type, straight, connecting pieces, socket, collars, caps, plugs, flanges/spigot with nut, bolts and washers for 80mm to 250mm dia complete including taking down existing fitting complete all as specified and directed.

Material and labour for ductile iron fittings upto 250mm bore such as bend, (any type, radius and angle) tapers of any type (straight bend, decreasing, increasing, flanged or double socketed etc) tail pieces, tee, single branch, 'Y' junction, double branch, cross collar, cap, plug etc including push on joints(tyton) complete all as directed.

Supply & fix in replacement of cast iron non-return valve 200 mm dia ncluding nut ,bolt ,washer and rubber packing complete all as specified :-Make Kirloskar/ Upadhaya/ GDPA/ Kartar

Supply & fix in replacement of cast iron non-return valve 150 mm dia including nut ,bolt ,washer and rubber packing complete all as specified :-Make Kirloskar/ Upadhaya/ GDPA/Kartar

Supply & fix in replacement of cast iron non-return valve 100 mm dia including nut ,bolt ,washer and rubber packing complete all as specified :-Make Kirloskar /Upadhaya /GDPA/Kartar

Supply and replacement of Bib tap 15 mm size ISI marked standard of PTMT any colour high pressure screwed for iron pipes and fixed. Make Prayag /polytuf/symet

Cleaning of Pump house and all connected valve pits inside and outside and cleaning roof of building cutting of grass in side of boundery wall , surrounding of OHTs and complete remove the all waste materials approx area upto 500 sqm complete all as specified and directed.

M&L in replacement for cast iron detachable joints ( D Joint), suitable for CI pipe line 100mm dia complte with full thread 12mm dia nut and bolts and washers incl two Nos rubber rings complete .

M&L in replacement for cast iron detachable joints (D Joint) suitable for CI pipe line 150mm dia complte with full thread 12mm dia nut and bolts and washers incl two Nos rubber rings complete

M&L in replacement for cast iron detachable joints (D Joint) suitable for CI pipe line 200mm dia complte with full thread 12mm dia nut and bolts and washers incl two Nos rubber rings complete

Material & Labour to repair leakages through lead joints from existing CI pipe of following size , fittings, tee, bends tail pieces, connecting pieces etc by using previously used and additional run lead , spun yarn including caulking to make the joints water tight including excavation works as required complete all as specified and directed for the following bore pipe line :- 250 mm bore

All as per item No 65 above but, 200 mm bore

All as per item No 65 above but, 150 mm bore

All as per item No 65 above but, 100mm bore

All as per item No 65 above but, 80mm bore

M&Lfor fixing in replacement ventuary/ orific arrangment made out of MS pipe 150 mm bore 7.0 mm thick 0.50mtr long(appx) including welding of flange at both end and five Nos. socket of 20 mm bore with fixing of nipple and gate valve of size 20 mm bore and one No. reducer of size 50 x 20 mm complete all as directed by Engineer in charge.

M&L for cutting of PCC/Hard standing/WBM road for passing of GI/CI pipes all as specified and directed . Note : Making good with PCC shall be measured and paid separetely under respective item.

M&L for PCC 1:2:4 Type B2 using 40 mm graded stone aggregate as in foundation , filling and mass concrete complete all as specified and as directed by Engineer- in -Charge.

M&L for replacement of gland ,suitable for sluice valve 80 mm to 250 mm bore including replacement of worn out nut ,bolt and washer complete.

M & L for construction of valve chamber 900 x 900 x 900 mm internal dimensions, 6 mm thick MS sheet cover with 2 Nos MS hinges welded to angle iron frame of 40x40x6 mm thick with lifting hook and locking arrangement complete with necessary earth work, brick work in CM (1:6), 230 mm thick, PCC bed (1:4:8) type D2 150 mm thick, cement plastering, finishing 15 mm thick in CM (1:4) and applying a coat of black bituminous paint to the steel surfaces incl dismantling and removal of old unserviceble valve pit remains all as specified and directed.

M & L for construction of valve chamber 600 x 600 x 600 mm internal dimensions, 6 mm thick MS sheet cover with 2 Nos MS hinges welded to angle iron frame of 40x40x6 mm thick with lifting hook and locking arrangement complete with necessary earth work, brick work in CM (1:6), 230 mm thick, PCC bed (1:4:8) type D2 150 mm thick, cement plastering, finishing 15 mm thick in CM (1:4) and applying a coat of black bituminous paint to the steel surfaces incl dismantling and removal of old unserviceble valve pit remains all as specified and directed.

S& F (in Replacemnt) Electronic microprocessor based digital & wire less type water level indicator with alarm at time of full level/Low level in over head tank of height upto 25 RM, including all eqpts accomodated in GI sheet box or completely enclosed complete including testing & Commissioning.. Make- Optic/ SAPCON/ Aquabrim

S & F in replacement fully automatic star delta starter suitable for 50 HP submerssible pump set including connecting all incoming and outgoing copper wire as directed . Make- L&T cat part No-MU-G 50. or equivalent in Havells/ Kirloskar

S & F in replacement fully automatic star delta starter suitable for 30 HP submerssible pump set including connecting all incoming and outgoing copper wire as directed . Make- L&T cat part No-MU-G 30. or equivalent in Havells/ Kirloskar

M&L in replacement MCCB 160 Amp ,Fore Pole ,25 KA adjustable type complete all as specified and as directed. Make-schinder/Legrand/Simense

M&L in replacement for MCCB 125 Amp , triple pole,25 KA adjustable complete all as specified and as directed.Make- Schinder/Legrand/Simense

M&L for cement concrete 1:2:4 Type B 1 using 20 mm graded stone aggregate, for PCC work under over head tank and other water supply area, complete all as specified and as directed by Engineer- in -Charge.

M&L for replacement of gland suitable for sluice valve 80 mm to 250 mm bore including replacement of worn out nut ,bolt and washer complete all as specified and directed.

M&L (in replacement) for making translite colour print LED panel for water supply site plan of pump house and OHT's or any other purpose including using clear acrylic sheet, blurr acrylic sheet of suitable thickness, clipon edge lit LED frame with using of high resolution LED complete with adopter and necessary fixing arrangements for making LED panel, wall mounted complete all as specified and as directed. NOTE:- (i) Water supply site plan kept at AGE E/M-II office. (ii) Letters or characters size shall be as directed by Engineer-in-charge.

M&L (in replacement) for design, manufacture, supply, installation and comissioning LED display boards of following sizes having compact design and maintenance friendly, the base of the board made of ACP(aluminium composite Panel) 3 mm thick and back side of board covered with GI sheet 24SWG, the letters and borders made of acrylic sheet 3 mm thick of colour as approved by Engineer-in-charge, LED module should as per requirement of letter space, the display language may be English/Hindi(Alpha numeric), its visibility should be suitable for day & Night (Outdoor application) and should be visible upto 25.00m (minimum), the text effect should be static, the LED suitable for power supply 230 volts/50 Hz, AC with switch ON and OFF the power supply to the display boards, the board shall be suitably braced on back side with angle iron 40mmx40mmx3mm and making good of disturbed surfaces as per original including necessary connection with 3 core copper conductor cable 1.5 sqmm from LED display boards to ceiling rose complete all as specified and as directed:- (a) Rectangular board having max 40 letters or characters in English language letter or character size, height not exceeding 250mm and back depth max 65mm of suitable width. NOTE:- Angle iron 40mmx40mmx3mm including nuts, bolts and washers shall be measured and paid seperately under respective items of BOQ.

S&F in replacement LED aviation obstruction light luminaires, die cast aluminium alloy housing with red polycarbonate dome, integral driver, min 5mm x 302 Nos LEDs, IP-65, short circuit and serge protection, 100V-270 V AC operating input voltage, life time 50000 Hrs, system wattage at 240V, 10 to 12 watts comprising 5 parallel circuit maximum 10-12 W consumption and fixed with and including bracket made out of 20mm of higher dia of GI pipe light grade, 1.2m long having suitable fixing arrangement at bottom made out of FI 50x6mm, fixing bolts etc including wiring with two single core, 1.5 sqmm nominal cross sectional area multistranded copper conductor cable, PVC insulated unsheathed 1100 Volts grade drawing in stove enamelled rigid mild steel surface conduit and conduit fittings not less 20mm noiminal dia with 1.5 sqmm nominal cross sectional area multistranded copper conductor cable, PVC insulated unsheathed 1100 Volts grade earth wire (length of wiring from aviation light fitting to panel of Pump house 25.00m approx) including taking down unserviceable/wornout LED aviation light fitting with GI strips of any size including wiring complete all as specified and directed.

S&F in replacement phase sequencer cum pump protection system 415/440 volts, 50 Hz, internal working voltage 12/14 volt, suitable for 50 HP with MNX 100 contactor capacity load for auto change of phase sequence if incommimg phase sequence changes, single phasing prevention system and adjustable low and high voltage protection system to protect the machinery, mounting on bracket made out 40x3 mm angle iron frame, all control wirings, cable connections complete all as specified and as directed. Make: Indian Engineering Co/ United Engineering /Legrand /Schneider / Havells

M & L in replacement for LED Building Security Light 70 watt of alumenium PDC housing glass coverwith IP 66 protection complete all as specified and directed. Make: Havells 70W Endura Pearl Plus Outdoor / or equivalent in Philips/ Crompton

Material and Labour in replacement for 3 core PVC insulated sheathed armoured stranded copper conductor cable of size 2.5 sqmm 1100 volt grade.

M&L for painting of existing power panel, orifice pipe arrangement, open pipe line and other misc items complete with suitable quality and approved colour of synthetic enamel paint as approved, all as specified and directed by Engr-in-charge.

M/L for structure work fabricated from structural , steel section including nut,bolts,washers including cutting/ welding in any position, any shape and drilling hole for bolts in any size and shape as per site requirement or directed and inclusive of one primer coat of red oxide and one finish coat of synthetic enamel black paint complete all as per specified and directed.

M.M.V. CONSTRUCTIONS

Preetpowercontrol

PAWAN COOL CORPORATION