RENEWAL OF STEEL FURNITURE AGAINST BER BOARD UNDER GE I GOS

Ladder Alluminium: FD-1025: Two aluminium stringers 60mmx31.75mm made in 'C' shape and 3.18mm thick aluminium shall be 2310mm long and joined together with aluminium rungs of aluminium conduit fluted pipe rungs ends bent to shape as shown on drawing. Eight aluminium rungs of aluminium conduit pipe of wall thickness not less than 2.43mm shall be equally spaced after leaving 150mm from bottom and top. Hard rubber cap/shoes shall be provided to bottom and top of aluminium stringers. Overall size of aluminium ladder shall be 2310mm long and 363.5mm wide. The clear space between the stringers shall be 300mm.

Table officers steel: FD-1003: Overall size shall be 1680mm long, 870mm wide and 760mm high. Steeel frame of overall size shall be of 1600mm long, 565mm wide and 740mm high. Four legs of 25mm mild steel tube of 1.6mm wall thickness shall be provided as shown on drawing. Top of legs shall be joined together with U- shaped frame of 25mmx40mm of 1mm thick sheet. Three drawers shall be provided on right hand sides of table. A cupboard with front open able door shall be provided on the left hand side of the table as shown in front elevation of drawing. A shelf shall be provided in the middle of cupboard. All sheet for drawer, shelf and cupboard and back covering shall be of 1mm thick. Irrespective of what is specified in note 7 of drawing, the top of table shall be provided with Plywood BWR BB type of 18 mm thick with Sunmica (teak shade ) only exposed Surface and standard PVC edging all-round the top of the table. Hard rubber/PVC toes shall be provided to all legs. Locking device shall be provided to drawers and shutters of cupboard. All steel surfaces exposed to view when placed in position shall be painted with two coats of enamel paint over a coat of primer after preparation of surfaces as directed by Engineer-in-Charge. Painting shall be done with spray machine.

Table computer: FD/E6/MAP/03: Overall size shall be 900mm long,561.20 mm wide and 750mm high.All Plywood with Sunmica used in manufacturing of top ,shelves,drawers,tray shall be of Plywood BWR BB type of 18 mm thick with Sunmica (teak shade ) only exposed Surface and standard PVC edging all-round.The frame of table shall be of 25MM, thick 18 Guge.The top of table shall be provided with 4mm thick teak wood beading.The legs shall be made out of 25mmx50mm MS rectangular CR pipe of 18 guage.Each leg shall be provided with rectangular PVC cover made to shape on front sides only.The legs shall also be provided with nylon buffers .Rest all as per drg.

Teapoy varandha: FD/E6/MAP/17: Overall size shall be 700mm long 400mm wide and 540mm high. DESCRIPTION:- a) Frame shall be of 18mm square MS pipe of wall thickness 1.6 mm. b) Base tray shall be made of 5mm dia MS bars. c) Irrespective of what is shown on drg,the top of table shall be 18mm thick BWR plywood of Grade-A with 1 mm thick laminated sheet pasted over the ply with marine grade adhesive and all edges of top shall be covered with 6mm thick teak wood beading f) Each leg shall be provided with 18mm sq hard rubber shoe. Rest all specifications and dimensions are as per drg FINISH:-The metal frame of teapoy shall be dry powder coated in black after preparation of surface

Shoe Rack Steel: FD/E6/MAP/02 (R) :Overall size shall be 700mm long,300mm wide and 880mm high. DESCRIPTION: The legs of the shoe rack shall be of 25mm dia MS pipe of 18 gauge. The five shelves of the rack shall be of 20mm dia MS pipe of 18 gauge welded to legs. The shelves shall have 3mm dia MS rod 9 Nos in widthwise and 3 nos in lengthwise welded to 20mm dia shelf frame. FINISH: Pre treated with epoxy powder coated oven baked with ivory white colour/white/warm grey, All steel surface shall be powder coated.

Bed hard :FD/E6/MAP/08 ( R) :Overall size shall be 2050mm long, 900mm wide and 800 mm high. DESCRIPTION: a) The frame of bed shall made of MS pipe of 18 Gauge as per specified sizes mentioned in drg. b) The head and foot board shall be provided with 18mm thick BWR plywood of grade A/MDF (in lieu of prelaminated particle board) duly pasted with 1 mm thick laminated sheet on both sides of approved shade and texture along with PVC edging screwed to MS Strip. c) The top of bed hard shall be of 12mm thick BWR ply of grade -A; place and fix over the four equidistant stiffener with 12 Nos of flat head bolt of 6 mm dia,50mm long nylon insert nut and round washer ,All-around of the bed should be joined together with welding accordance with standard workmenship,Strictly Prohibited nuts and bolts for fixing both side long rails and legs. d) Each leg of bed hard shall be provided with high quality PVC shoes 40mm high having metal washer fitted inside compatible to insert 38x38mm sq pipe. Rest all specifications and dimensions are as per drg FINISH:-The bed hard shall be dry powder coated in black after preparation of surface ..

Table clk steel: FD-1004:Overall size shall be 1200mm long 610mm wide and 760mm high. Steel frame of overall size shall be 1160mm long, 570mm wide and 742mm high. Four legs of 25mm mild steel tube of 1.6mm wall thickness shall be provided as shown on drawing. Top of legs shall be joined together with 25mm square mild steel tube of 1.6mm wall thickness in long and short sides. Two short stiffeners of 25mm square mild steel tube of 1.6mm wall thickness shall be provided at 130mm from bottom of legs. One long stiffener of 25mm square mild steel tube of 1.6mm wall thickness shall be provided to the middle of short stiffeners joining short stiffeners. Three drawers of equal size shall be provided on the right hand side above the stiffeners at 130mm high with overall size of 350mm wide and 430mm high and 410mm deep. Irrespective of what is shown on drawing and specified in note 7 of the drawing, the top of table shall be provided with Plywood BWR A type of 18 mm thick with Sunmica (teak shade ) only exposed Surface and standard PVC edging all-round the top of the table.Hard rubber/PVC toes shall be provided to the legs. Locking device shall be provided to drawers. All steel surfaces exposed to view when placed in position shall be given two coats of enamel paint over a coat of primer with spray machine after preparation of surfaces.

Almirah Small steel: FD-1032:Overall size shall be 760mm long, 440mm wide and 1270mm high. The base shall be made of two numbers mild steel channel base welded to bottom of almirah and shall be 100mm high . Mild steel sheet shall be 1mm thick for channel base. The base channel shall be welded at 50mm from each end of 765mm length and shall be upto full width of 440mm of almirah. Top, sides,back,bottom and front of almirah shall be of 1mm thick mild steel sheet. Three shelves equally spaced making four compartments shall be provided and shall be of 1mm thick mid steel sheet. Front shutters shall have two leaves. A steel chromium plated handle shall be provided to the shutter. Handles shall be 100mm long. A three way locking device shall be provided to front shutters. Each leaf of front shutter shall be hinged with two numbers butt hinges 75m long and shutters shall be side hung. All joints and welding, fixing shall be done in accordance with standard workmanship. All steeel surfaces exposed to view when placed in position shall be given two coats of enamel paint over a coat of primer after preparation of steel surfaces. Painting shall be done with spray machine.

Chair Writing :FD/E6/MAP/12: DIMENSION:The overall size of the chair shall approx be 950mm high,500mmwide DESCRIPTION:It shall be of trade pattern and of one make and model as described.The size /dimensions of the chair shall meet the overall specification as described.The frame of the chair shall be of MS tubular frame powder coated ,cantilever type of size 25mmx10mm in section.Back form shall be designed with contoured lumber support for extra comfort.120mm thick hot pressed plywood upholstered with fabric and moulded polyurethane foam with PVC lipping alround shall be provided at seat and back.Arm rest shall be of black integral skin poly urethane with shore “A” hardness and reinforced with MS insert.It shall be scratch and wheather resistant.Both hand rest section shall have inner and outer dia of 210mm and 230mm respectively and have slope towards front.. FINISH:Pre treated with epoxy powder caoted oven baked with ivory white colour/white/warmgrey.

Double bunk charpoy:CWE(P)/V/SK/04:Irrespective of what is shown on drawing sections for short rails and legs shall be of 40 x 40 x 2.6 mm, long rails of size 60x40x2.9 mm and stiffener of size 25 x 25 x 2.6 mm shall be provided. Vertical / Legs, short rails shall be made out of 40 x 40 x 2.6 mm square MS tube, the header, footer & guard bars both sides shall be made out of 25 mm dia medium grade MS tube. Long rails shall be made out of 60 x 40 x 2.9 mm hollow rectangular tube.Frame work to support wire mesh and stifferners shall be made out of rectangular tube of size 25x25x2.60 mm as shown on drawing. Ladder shall be made out of 25x25x2.6 mm hollow rectangular MS tubes. Wire mesh of size 100 x 100 mm made out of 4 mm dia MS wire wlded at round with MS tube and stiffeners below the lower bed top as shown on drawing. Perforated mild steel sheet 1.63 mm (16 guage) shall be porovided as in bed tops and welded to members all as directed. Legs charpoy shall be provided 75 mm dia 3.15 mm thick MS plate with hard rubber / PVC toes. All steel surfaces shall be powder coated of approved Shade . All joints /welding /fixing Shall be done in accordance with the standard work man ship and specifications. All steel section shall be of make Tata /Jindal/Sail /Surya Prakash .MS perforated Sheet and wire mesh shall confirm to relevent to IS . Rest all as shown on drawing .

Almirah Steel large :FD/E6/MAP/18: DIMENSION:-The Overall size of almirah large steel is 1900mm high, 910mm wide and 490mm deep. DESCRIPTION:- a) It shall be made of 1mm thick mild steel sheet/CRCA . All joints shall be riveted and welded thoroughly. b) The almirah shall have three shelves, one locker and one drawers with two partitions at upper half with hanging arrangement. c) The almirah shall have one spring action recessed handle 150mm long with built in locking arrangement fitted to cut out space in one shutter or normal handle 120mm long having three way locking system with proper workmanship. d) The handle of inside drawer shall be made to "S" Shape by bending the MS sheet of front face of drawer to full length. e) The handle of inside locker shall be provided with two way bolt locking system having duplicate flat keys Rest all specifications and dimensions are as per drg FINISH:- The almirah shall be dry powder coated in double shade (shutter in off white and outer frame in steel grey) after preparation of surface .

Chair Conference 'S ' frame (TP) :Make -R. K .Furniture,Model No -RK -010 ,Make Durian ,Model- Zurich,Marvel,Atline,Nature ,Rich

Almirah Glazed Large (Steel): FD-104 (M): Overall size shall be 1985 mm high, 920 mm wide and 485 mm deep when measured from out side. Sides, bottom, top and intermediate adjustable shelves shall be made of 1mm thick mild steel sheet. Bottom rests shall be made of 1mm thick mild steel sheet made to U-shape with ends turned in upto 25mm and welded to bottom of almirah with spot welding. Ends of Bottom rests shall be covered with 1mm thick mild steel sheet. Four shelves making five compartments shall be provided all as shown on drawing. Two numbers front shutters with side hung arrangement as per Godrej pattern shall be provided. Mild steel sheet 1mm thick shall be provided in the shutters. The glazed shutters shall have handle and three way locking device as per Godrej pattern. Painting shall be done after preparing the surfaces smooth without any abrasion. Automotive paint with spray machine shall be provided after preparation of surfaces to all steel and iron surfaces exposed to view when placed in position. Glazing shall be done with 3.5mm thick float glass of Modiguard.

Stool (Steel) 510 MM High: FD-81 (M): Over all size shall be 305mm long, 305mm wide and 510 mm high. Stool shall be made out of 1mm thick mild steel sheet as shown on drawing. All steel and iron surfaces exposed to view when placed in position shall be painted with two coats of enamel paint over a coat of primer after prepararation of surfaces,Tint of paint shall be as directed by GE. Painting shall be done with spray machine. Rest all as shown on drawing.

Chair Verandah:FD/MAP-II/06: DIMENSION:-The overall size of the chair shall be 455mm wide 455mm deep and 940 mm high. DESCRIPTION:- The frame of the chair shall be of 19mm dia MS tube of wall thickness 1.6mm duly powder coated. The seat and back of the chair shall be of PVC 4mm of weight not less than 1.85 kgs and grooves 90x10mm ten in nos on seat and back. One stiffener 19mm dia MS tube shall be provided in between the front legs as shown in drg. An additional support in seat only shall be provided at centre between opposite sides by welding 20mm conduit pipe for rest of PVC seat irrespective of what is shown on drg.The entire frame of the chair shall be painted in white after preparation of surface. Rubber shoes of best quality shall be provided to each end of legs. Rest all as per drg FINISH:-The frame of the chair shall be powder coated 70 microns by 7 tank process and oven dried in white.

Chair Combined 03 seater with cushion(TP): Make:- Featherlite,Model:- Forum 3 seater Tandem, Make-Godrej Interio, Model -Air

Charpoy folding IP with hard top: FD-388 ( R ):Overall size shall be of 1980x900x550mm.The frame work shall be 25mm dia 16 guage MS conduit pipe.04 nos stiffner shall be provided between long rail 25mm dia 16 guage .Top shall be of 12 mm thick BWR plywood conforming to IS-303. Rest all as shown on drawing. All joints/weldings/fixing shall be done in accordance with standard workmanship. All frame work shall be painted with spray paint synthetic enameled over a coat of primer all as directed by Engg-in -charge.

Table Pantry (Steel ): FD-1020:Overall size shall be 900mm long, 550mm wide and 840mm high. Size of steel frame shall be 880mmx515mmx 815mm. Legs shall be four in numbers. Legs shall be of 25mm square mild steel tube of wall thickness 1.6mm and 815mm high. Top of legs shall be joined together in long and short sides with top rails of 25mm square mild steel tube of wall thickness 1.6mm Two side stiffeners 465mm long shall be provided at 100mm from bottom of legs. The stiffeners shall be of 25mm square mild steel tube of wall thickness 1.6mm. A long stiffeners shall be provided in the middle of short stiffeners joining short stiffeners with 25mm square mild steel tube of wall thickness 1.6mm. Two drawers of equal size shall be provided at the bottom of top of table. All steel sheet used for drawers and side covering of drawers and for support of drawer shall be of mild steel and 1mm thick. Top of table shall be 25mm thick polished kotah stone slab in one piece. Legs shall be provided with hard rubber/PVC toes at bottom. All steel surfaces exposed to view when placed in position shall be given two coats of enamel paint over a coat of primer after preparation of surfaces. Painting shall be done with spray machine.

Table Cook (Steel ) : FD-1019: Overall size shall be 900mmx540mmx 840m. Steel frame shall be of 850mmx490mmx815mm. Four legs shall be of 25mm square mild steel tube of wall thickness. 1.6mm. Legs shall be connected together in long and short sides with top rails of 25mm square mild steel tube of wall thickness 1.6mm. Top rails in long and short sides shall be joined in the middle by 25mm square mild steel tube of wall thickness 1.6mm stiffeners for the support of top of table. Two short stiffeners joining the legs in short sides shall be provided at 100mm from bottom of legs with 25mm square mild steel tube of wall thickness 1.6mm. Two side stiffeners shall be fixed together in the middle by a long stiffeners of 25mm square mild steel tube of wall thickness 1.6mm. Top of table shall be of 25mm thick polished kotah stone all as shown on drawing. Steel surfaces exposed to view when placed in position shall be given two coats of enamel paint over a coat of primer with spray machine after preparation of steel surfaces.

Chair Computer : FD/E6/MAP/01: DIMENSION: The overall size of the chair shall not be less than 480mm wide and deep and 550mm high upto seat from ground level. DESCRIPTION: a) The Seat & Back shall be made of PU foam of density 45 ± 2 Kg/m3 upholstered with changeable fabric upholstery covers b) The base of chair shall have five prong with pneumatic up & down with one point locking mechanism. c) Handle arm shall be gas-assisted injection molded from black polypropylene. Revolving & tilt should have a full 360 degree revolving mechanism with 17 deg. d) Maximum and minimum height of gas lift shall be 930mm and 830 mm respectively. e) Color of seat upholster should be post office red, blue or black. FINISH: All metal parts shall be dry powder coated in thickness more than 50 microns.

Chair School With Hand Board: FD/E6/MAP/05: Over all size shall be of 585 mmWx300 mm Dx738 mm H. 25mm dia 16 Gauge MS tube shall be provided for steel frame. Paint synthetic enamel colour black 1st class shall be used two coats over a coat of primer. One piece PVC Seat and Back shall be provided. All Diamensions, shape and size shall be followed as per drg. All joints, fixing shall be done in accordance with standard specifications. Rest all as shown on drg.

Table for Havs & ORs Steel : FD-1007: Overall size shall be 900mmx600mmx760mm. Steel frame shall be of 800mm500mmx742mm. Four legs shall be of 25mm square mild steel tube of wall thickness 1.6mm. Top of legs shall be joined together with 25mm square mld steel tube of wall thickness 1.6mm top rails on long and short sides. Two short stiffeners joining legs in short sides at 100mm from bottom shall be provided in the middle of short stiffeners joining short stiffeners with 25mm square mild steel tube of wall thickness 1.6mm at 100mm from bottom of legs. the top of table shall be provided with Plywood BWR BB type of 18 mm thick with Sunmica (teak shade ) only exposed Surface and standard PVC edging all-round the top of the table irrespective of what is shown and specified on drawing. PVC/hard rubber toes shall be provided to the bottom of legs. All steel surfaces exposed to view when placed in position shall be painted with two coats of enamel paint over a coat of primer with spray machine after preparation of steel surfaces.

Please Enable Macros to View BoQ information