Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹23.8 LAccepted-AOC | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹25.7 L+₹1.5 L (6.04%)Rejected-AOC | L2 | Rejected-AOC OTHER THAN LOWEST BIDDER |
Tender Value
₹27 L
EMD Value
₹54,000
Closing Date
19 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE
HQ CWE Rajouri PIN-900129 C/o 56 APO
ADDITION / ALTERATION OF OFFICERS WASHROOM FOR PALMA GRN UNDER AGE(I)CIF (R)
2022_MES_538248_1
CANO-CWE/PAL-29/2022-23
Open Tender
Civil Works
Item Rate
180 days
Palma GRN
Class D category a(i)
9 documents required · 9 mandatory
₹500
AGE (I) CIF (R)
₹54,000
Yes
13 Sept 2022
15 Jul 2022
26 Aug 2022
15 Jul 2022
19 Aug 2022
5 Aug 2022
Amount
B&R PORTION:- Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified.
Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slab/blankets, any thickness, including cover fillets complete all as specified.
Taking down chowkats or frames with shutters (without taking off shutters from the frame) not exc 1.5 sqm each complete all as specified.
Taking down chowkats or frames with shutters (without taking off shutters from the frame) exc 1.5 sqm but n.exc 4 sqm each complete all as specified and directed by engr-in-charge.
Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) incl tiles any type complete all as specified.
Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified.
Taking up or down steel tubing bore of pipe in 15mm and connections, including cleaning for refixing or removal to store etc complete all as specified and directed.
Taking down cement or cement lime plaster, any description on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed by Engr-in-charge.
Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.
Demolition of brick work or stone/boulder masonry, built in cement mortar or cement lime mortar including copings, all quoins, arches, pillars, etc., but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed by engr-in-charge.
Mild steel TMT bars 10mm dia and above, cut to length, bent to shape required, including cranking, bending spirally for hooping for column, hooking ends and binding with and including MS wire annealed not less than 0.9mm dia complete all as specified and directed.
Description all as per item No 11 above but 6mm to 8mm dia.
Precast cement concrete as in cover slabs 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) set in cement mortar (1:6) complete after placing in position over septic tanks/manhole covers/drain covers complete all as specified and directed by the Engineer in Charge.
Reinforced cement concrete (nominal mix) type B-1 1:2:4 (20mm graded crushed stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.
Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) rough finished surface of concrete flat complete all as specified.
Excavating in trenches, n.exc 1.5m wide and n.exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc n.exc 10 Sqm on plan and n.exc 1.5m in depth and getting out in any type of soil complete all as specified and directed by Engr-in-charge.
Cement concrete type E-2 1:5:10 (40mm graded crushed stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed by Engr-in-charge.
Brick work with sub class `B' bricks using old size bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6, complete all as specified and directed by Engr-in-charge.
Brick work with sub class `B' bricks using old size bricks, straight or curved on plan exc 6m mean radius, built in CM 1:4, complete all as specified and directed by Engr-in-charge.
Description all as per item No 19 above but except bricks complete all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm any type of soil complete all as specified and directed.
Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed by Engr-in-charge.
Cement concrete type B-1 1:2:4 (20mm graded crushed stone aggregate) as in bed plates, copings, etc incl necessary form work complete all as specified and directed by engr-in-charge.
Rendering 15mm thick on fair faces of brick or concrete surfaces in cement mortar 1:6 on walls finished even and smooth complete all as specified and directed by Engr-in-charge.
Rendering 15mm thick on fair faces of brick or concrete surfaces in cement mortar 1:4 on walls finished even and smooth complete all as specified and directed by engr-in-charge.
Mild steel tubular work in purlins, vertical posts, rafters,etc including special shaped washer and structural steel is painted one shop coat of zinc chromate primer paint (including preparation of surface) at Contractor's workshop, etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and as directed by Engr-in-charge.
Preparation of new steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engr-in-charge.
Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed by Engr-in-charge.
PCC (1:3:6) type C-2 (using 20mm graded crushed stone aggregate), 50mm thick as in Plinth Protection finished even and fair etc complete all as specified and directed.
25mm thick cement concrete type B-1, 1:2:4 (20mm graded crushed stone aggregate) as in sub floors finished even and rough to receive the topping layer complete all as specified and directed.
100mm thick cement concrete type D-2 1:4:8 (40mm graded crushed stone aggregate) as in sub base finished even and rough to receive the topping layer complete all as specified and directed by engr-in-charge.
Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with & including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed by Engineer-in-charge.
Glazed ceramic coloured designer tiles 450 x 350x 7 mm thick as in vertical surfaces set and jointed in neat cement slurry and pointed with coloured cement to match the shade of tiles etc complete all as specified and directed.
Solid PVC Door Frame of size 50mmx47mm made out of 5mm but wood grain printed PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with printed sheet reinforced with MS square tube and fixing in opening as per specification & drawing given in SSR 2004(Part-II) etc complete all as specified and directed.
Factory made solid panel PVC door shutter 30mm thick style consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded but wood grain printed PVC sheet used instead of Plain colour PVC sheet & 5mm thick x15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (900 ) used instead of exposed portion of PVC sheet beading for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, suppling & fixing in the frame at site as per specification & drawing etc complete all as specified and directed.
Aluminium anodised barrel tower bolts of extruded section of 200 mm size, complete all as specified and directed.
Aluminium handles, cast type anodised of size 125 mm, complete all as specified and directed.
Stainless steel butt hinges of size 100mm size, complete all as specified and directed.
Preparation of new plastered surfaces and applying two coats of cement base paint on walls complete all as specified and directed by Engineer-in-charge.
Anodised aluminium snap grid frame work of size 600 x 600 mm for false ceiling having aluminium Tee of size 25x25x1.50mm as main runner, 25x25x1.25mm thick aluminium Tee as cross runner and aluminium angle of size 25x25x1.25mm at the perimeter including GI adjustable suspender of required length complete all as specified and directed by Engr-in-charge.
8 mm thick armstrong false ceiling board (595x595) mm size and fixed to snap grid ceiling frame work complete all as specified and directed by Engr-in-charge.
Steel water tubing of 15 mm bore ‘medium grade’ galvanized with all fittings like socket, union, elbow, bend, tees etc fixed to walls and ceilings or laid in floors/ trenches, complete all as specified.
Description all as per item No-42 above but fixing only old serviceable pipe retrieved from respective item with & including all fitting like socket, union, elbow, bend, tees etc complete all as specified and directed.
TITANIUM wall mixer (3-in-1) cast copper alloy chromium plated with telephonic shower and overhead shower with bend etc complete all as specified and directed. Make:-CERA Cat No. F1003403 or equivalent cat part of make as specified in list of make here-in-after.
1.5metre flexible stainless steel hose, complete all as specified and directed. Make:-CERA Cat Part No. F8070401 or equivalent cat part of make as specified in list of make here-in-after.
Shower hook cast copper alloy chromium plated complete all as specified and directed. Make:-CERA Cat Part No. F8070102 or equivalent cat part of make as specified in list of make here-in-after.
Hand shower green in size 100 x 55 mm (4" x 2") with 130 mm (5”) long arm cast copper alloy chromium plated, complete all as specified and directed. Make:-CERA Cat. No. F7030102AB or equivalent cat part of make as specified in list of make here-in-after.
Overhead rain shower square 200x200 mm (8" x 8") cast copper alloy chromium plated, complete all as specified and directed. Make:-CERA Cat. No. F7010502AB or equivalent cat part of make as specified in list of make here-in-after.
Overhead shower arm cast copper alloy chromium plated 450mm with wall flange, complete all as specified and directed. Make:-CERA Cat. No. F7040106 or equivalent cat part of make as specified in list of make here-in-after.
Angle cock cast copper alloy chromium plated with wall flange, complete all as specified and directed. Make:-CERA Cat. No. F1003201 or equivalent cat part of make as specified in list of make here-in-after.
Vitreous china one piece EWC with seat cover and twin flush fittings snow white Model Name : CASINO 660 x 350 x 760 with S Trap 220mm, including fixing with screw/bolts fixed in repairs, complete all as specified and directed. Make:-CERA Cat. No.S1013149 or equivalent cat part of make as specified in list of make here-in-after.
Vitreous china wall hung wash basin with full pedestal snow white, excluding taps, chain and plug and porcelain stopper but including brackets, waste coupling, etc. fixed in repairs, complete all as specified and directed. Make:-CERA Cat. No.S2040122 for basin & Cat. No.S2090107 for pedestal or equivalent cat part of make as specified in list of make here-in-after.
VICTOR single lever basin mixer cast copper alloy chromium plated with 450mm branded connection pipe bore dia of pipe 15mm fixed in repairs complete all as specified and directed by Engineer-in-charge. Make:-CERA Cat Part No. F1015451 or equivalent cat part of make as specified in list of make here-in-after.
PVC waste pipe flexible for wash hand basin any size fixed in repairs, complete all as specified and directed by Engr-in-charge.
PVC connections 15mm size with PTMT nuts of length 300mm repairs, complete all as specified and directed by Engr-in-charge.
2 way bib cock with side handle, wall flange and aerator cast copper alloy chromium plated, bore dia of pipe 15mm fixed in repairs complete all as specified and directed by Engineer-in-charge. Make:-CERA Cat Part No. F1003161 or equivalent cat part of make as specified in list of make here-in-after.
Health faucet brass body with wall hook and 1 metre SS braided rubber hose pipe,complete all as specified and directed by Engineer-in-charge. Make:-CERA Cat Part No. F8030301 or equivalent cat part of make as specified in list of make here-in-after.
Toilet paper holder with flap guard chromium plated, complete all as specified and directed by Engineer-in-charge. Make:-CERA Cat Part No. F5002110 or equivalent cat part of make as specified in list of make here-in-after.
Towel ring chromium plated complete all as specified and directed. Make:-CERA Cat Part No. F5002105 or equivalent cat part of make as specified in list of make here-in-after.
Towel rack chromium plated 600mm fixed in repairs complete all as specified and directed. Make:-CERA Cat Part No. F5002101 or equivalent cat part of make as specified in list of make here-in-after.
Soap dish chromium plated fixed in repairs complete all as specified and directed. Make:-CERA Cat Part No. F5007106 or equivalent cat part of make as specified in list of make here-in-after.
Corner glass shelf (Large) 300 x 300 mm complete all as specified and directed. Make:-CERA Cat Part No. F5005103 or equivalent cat part of make as specified in list of make here-in-after.
Corner glass shelf (Medium) 225 x 225 mm complete all as specified and directed. Make:-CERA Cat Part No. F5005102 or equivalent cat part of make as specified in list of make here-in-after.
Corner glass shelf (Small) 150 x 150 mm complete all as specified and directed. Make:-CERA Cat Part No. F5005101 or equivalent cat part of make as specified in list of make here-in-after.
Powder coated stainless steel peg set of six complete all as specified and directed by Engr-in-charge.
75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed by Engineer-in-charge.
110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed by Engineer-in-charge.
75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall complete all as specified and directed by Engineer-in-charge.
75mm bore PVC (SWR) bend any radius complete all as specified and directed by engineer-in-charge.
110mm bore PVC (SWR) bend any radius complete all as specified and directed by Engineer-in-charge.
75mm bore PVC (SWR) vent cawl complete all as specified and directed by Engineer-in-charge.
110mm bore PVC (SWR) vent cawl complete all as specified and directed by Engineer-in-charge.
75mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed by Engineer-in-charge.
Powder coated any colour (Thickness or powder coating not less than 50 micron) anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified
Powder coated any colour (Thickness or powder coating not less than 50 micron) anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No.). hinges type B-21 100mm long (2 Nos.) suitable handle (1 No.) complete all as specified
4mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and directed by Engr-in-charge.
E&M PORTION:- Taking down carefully copper/ aluminium unserviceable/ perished point wiring (light, fan, socket or power complete including fixture and fittings such as switches, ceiling roses, pandents, regulators, sockets, light fittings,removing material from site for taking credit etc and making good disturbed surfaces of wall, floors, complete all as specifiecd and directed.
Point wiring with two single core 1.5 Sqmm (nominal cross section area) FRLSH PVC insulated unsheathed multistranded copper conductor cable and one single core 1.5 Sqmm (nominal cross section area) FRLSH PVC insulated unsheathed multistranded copper conductor cable as earth continuity to common earth and connecting to earth dolly running in and including medium grade rigid non metallic PVC concealed conduit of suitable size in wall after cutting chases in wall with sunken galvanised pressed steel box of thickness not less than 2mm of appropriate sizes suitable for modular switch/ socket including inner and outer white cover plate with all requisite accessories such as PVC elbow, Tee, collars, bends etc. complete all as specified and as directed for the following :-
One light/fan point controlled by one way switch by one way switch 6 Amp 240 Volt, complete all as specified.
For one three pin socket outlet 6 Amps independent board complete all as specified.
One 3 pin 6 Amp socket out let on the same board with other switches with cables 1.5 sqmm, complete all as specified.
Description all as per srl item No 79 here in before but for one 3 pin socket outlet 16/20 Amp independent with two single core 2.5 Sqmm size cable as phase & neutral and one single core 2.5 Sqmm as in continuous earth wire, complete all as specified.
Modular switch single pole one way 6 Amps 1 module complete all as specified and directed.
Modular socket 6 A-2/3 pin combined 2 module complete all as specified and directed.
Modular switch single pole one way 16 Amps 1 module complete all as specified and directed.
Modular socket 6 A/16 Amp -3/5 pin combined 2 module complete all as specified and directed.
Ceiling rose, surface bakelite 65x50mm three terminals PVC/Polycarbonate complete all as specified and as directed
Modular white cover plate with frame 3 module, complete all as specified and as directed
Modular white cover plate with frame 8 module, complete all as specified and as directed
Replacement of sub main wiring with two run of single core PVC insulated FRLSH stranded copper conductor cable of size 4 Sq mm and one run of 4 Sq mm PVC insulated FRLSH copper conductor cable as earth continuity conductor drawn in and including PVC casing and caping with necessary accessories complete all as directed. Note : 2 Runs of 4 sqmm cable and one run of 4.00 sqmm earth wire with PVC casing and caping shall be measured as on length.
Sheet metal enclosure, SPN type with two pin & earth plug and socket (Industrial type DB) with and including one MCB SP, C Curve type of capacity 25 Amp, 10 kA, 240 Volt complete all as specified and directed.
Replacement of PVC/ Polycarbonate lamp holder insulated body with back plate batten/angle type for batten fitting complete all as specified.
Replacement of LED Bulbs white /warm white (as per demand) in colour of 14/15 Watt, B-22 base Cap, complete all as specified. Make:-Havells Cat Part No:- LHLDDEEEML8R015 or Equivalent cat part of make as specified in list of make here in after.
Endura Linear NEO wall mounted LED Batten 20 Watt LED with tube rod 1X20 Watt, extruded aluminium heat sink provided for efficient heat dissipation and integrated electronic driver complete hosing with all accessories pre wired and making connection with three core copper flexible cable of size 23/0.0076 from ceiling rose to PVC connection to light fitting fixed in repairs, complete all as specified and directed. Make:-Havells Cat Part No:- ENDURALINEARNEOBS20WLED865SPCWH or Equivalent cat part of make as specified in list of make here in after.
PLUTO Neo PANEL '2X2' Environmental friendly, 34 watt new generation,aesthetically designed, ultra modern recess mounting luminaire with high brightness SMD LEDs as light source, suitable for Armstrong/Grid ceiling and making connection with three core copper flexible cable of suitable size to light fitting complete all as specified and directed. Make:-Havells cat part No-PLUTONEO2X2PLR34WLED857S or Equivalent cat part of make as specified in list of make here in after.
Tube light fitting with LED 1 x 10W tube Rod with end cap complete with hosing with all accessories pre wired and making connection with three core copper flexible cable of size 23/0.0076 from ceiling rose to PVC connection to light fitting fixed, complete all as specified and directed. Make:-Havells Cat Part No:- LUMILINEPLUSBS10WLED865SPCSS or Equivalent cat part of make as specified in Appx 'A' here in after.
MCB distribution board double door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating, single pole and neutral 04 way. 230 volts with bus bar rating 200 Amps, dust and vermin proof and IP 43 - IK 09 protection including grouting in the wall, cutting & chasing etc complete all as specified and directed.
Exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm including taking out old exhaust fan with all connection and deposited to MES yard all as specified and directed.
Supply and fix in replacement of electric water heater,storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, 15mm dia & not less than 600mm long PVC connection pipe etc. complete including taking out old geyser with all connection and deposited to MES yard all as specified and directed.
MCB single pole 6 to 32 amps 240 volts 10 KA 'C' series fixed in repair, complete all as specified. Make:-Havells cat part No-DHMGCSPF006-032 or equivalent cat part of make as specified in list of make here-in-after.
MCB single pole & neutral 40-63 amps 240 volts 10 KA 'C' series fixed in repairs, complete all as specified. Make:-Havells cat part No-DHMGCSNF040-63 or equivalent cat part of make as specified in list of make here-in-after.
MCCB 125 Amps, 4 Pole, 415 Volts, 50 Hz, 16 KA fixed thermal & fixed magnetic fixed in repairs, complete all as specified and directed. Make:-Havells cat part No-IHLGNF0125 # or equivalent cat part of make as specified in list of make here-in-after.
Earthing complete with GI earth plate electrode 600mmx600mmx6mm thick burried in ground vertically to a depth not less than 2.25meters below ground level with top edge of the earth plate at a depth not lesss than 1.5 meter below the ground level, earth plate surrounded 15cm thick layers of common salt and charcoal dust starting from ground below and above 15 cm of earth plate. GI plate connected with galvanised iron wire of 04mm dia by means of Copper nuts, bolts and washers. Strip laid in 40mm dia light grade GI pipe as protection from top of the plate up to test point (cost of protection pipe up to 7.5 meters from earth electrode will be included in the rates quoted by the contractor) with following:- (a) GI wire of size 04mm dia. (b) Watering pipe GI light grade 20mm dia from top of the earth electrode up to MS funnel with wire mesh embeded in floor of PCC earth pit. (GI Funnel should properly tightned on GI watering pipe and embeded in PCC floor of earth pit with open top suitable for watering of earth pits)
(c) PCC earth pit 30x30x30cm internal dimension constructed in PCC 1:2:4 type B1 exposed surfaces smoothly finished with 15mm thick cement mortar 1:6 plaster including RCC 1 :2:4 type B0 reinforced with 8mm dia deformed bars @100 mmc/c bothways pit cover 25mm thick with 2 Nos MS handles of 12mm dia suitable for carrying of pit cover. (d) Angle iron frame made of 40x40x4 mm for 30x30 cm PCC pit for holding the pit cover. (e ) Apply two coat of syntheticnenamel paint over one coat of red oxide zinc chrome primer on exposed steel surfaces and two coat of hot tar on embedded portion of steel surfaces.
MCB distribution board double door vertical type made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating, TPN 12 way. 415 volts with bus bar rating 200 Amps, dust and vermin proof and IP 43 - IK 09 protection suitable for incorporation of MCCB 125 Amps 4 pole, including grouting in the wall, cutting & chasing etc. fixed in repairs, complete all as specified.
Supply and lay and testing cable XLPE insulated PVC bedded, galvanized steel strip or wire armoured 1100 volt grade 3.5 core 50 sqmm with stranded aluminium conductor all as specified and directed.
Excavation in trenches not exc 1.5 mtr wide and n. exc 1.5 m depth and getting out in any type of soil for laying UG cables and foundation of poles of various sizes.
Returning, filling in including spreading, leveling, watering and well ramming in layers n. exc25 cm in any type of soil.
Removing surplus excavated materials to a distance n. exc 50 m and depositing where directed at a level n exc 1.5 m above the starting point.
Supply and spread clean dry river sand in trenches ,ducts including leveling, punning for cushioning of cables all as specified Note : Punned thickness of sand cushioning shall be measured.
Brick covering with equal to length of brick as mechanical protection to cable with well burnt sub class 'B' bricks laid, complete all as specified.
Boring of holes under road, pavement, hard standing by trenchless techonology using ultra sound technique and necessary machine including supply and laying of GI pipe 50 mm dia type medium grade complete all as specified and directed by Enginer-in-Charge.
Supply & fix 01 HP pressure pump single phase (multistage) inlet/oulet size 25X25mm cast iron fixed on MS angle iron frame of suitable size as directed by Engineer-Incharge for maximum flow 2088 litrs per hour, complete all as specified and directed.
MCB single pole & neutral 06-32 amps 240 volts 10 KA 'C' series fixed in repairs, complete all as specified. Make:-Havells cat part No-DHMGCSNF006-032 or equivalent cat part of make as specified in list of make here-in-after.
arneesh kumar suri
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .