DEMOLITION AND RECONSTRUCTION OF OUTER PERIMETER WALL UNDER GE AF GURGAON NO 1

Amount

DEMOLITION & DISMANTLING

Demolition of brick work or stone boulder masonry, built in cement mortar or cement lime mortar including all quoins, pillars etc. but excluding ashlar facings, dressed stonework and concrete articles complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) in ground floors (below or above ground level) not exceeding 15 cm thickness complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors not exceeding 15 cm (thickness below or above ground level) complete all as specified and as directed.

Dismantling galvanized 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs complete all as specified and as directed. Note: Each line of wire shall be measured

Dismantling galvanised steel concertina coil, any dia and in any position complete all as specified and directed.

EXCAVATION AND EARTHWORK

Excavation over areas by mechanical means not exceeding 1.5 metre deep and getting out in any type of soil complete all as specified and as directed.

Excavating in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth, foundation etc for shafts, well, cesspits, manholes, pier holes etc in exceeding 10 sq m on plan and getting out any type of soil complete all as specified and as directed.

Returning filling in including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick in any type of soil by mechanical means complete all as specified and as directed.

Removing excavated material to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above starting point complete all as specified and as directed.

Removing excavated material such as soil / brickwork / stone masonry / concrete debris depositing outside MOD land at Govt designated dumping yard by mechanical means at a distance of beyond 5 km upto distance 15 km complete all as specified and as directed.

COMPOUND WALL, FENCING AND GATE

Material and labour for use and waste of timbering as planking and strutting for excavation in trenches not exceeding 1.5m deep in soil, including wales, struts, open poling boards, etc. as may be necessary for fixing and removal complete all as specified and as directed.

Material and labour for plain cement concrete 1:4:8 type D2 using 40 mm graded stone aggregate as in foundation, filling and mass concrete complete all as specified and as directed.

Material and labour for Reinforced Cement Concrete (RCC) M-25 (Design Mix) using 20 mm graded stone aggregate in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns etc. basement slabs, under reamed piles and mass concrete complete all as specified and as directed.

Material and labour for Reinforced Cement Concrete (RCC) M-25 (Design Mix) using 20 mm graded stone aggregate in walls, retaining walls, basement walls, ballast walls and the like, any thickness above top of footings including attached pilasters and buttresses and concrete surfaces finished with even and fair complete all as specified and as directed.

Material and labour for brickwork with subclass 'B' bricks, straight or curved on plan exc 6m mean radius built in Cement Mortar in 1:6 complete all as specified and as directed.

Material and labour for use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work, vertical or to batter for fair finished surfaces complete all as specified and as directed.

Material and labour for use and waste of formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc. vertical or to batter for fair finished surfaces of concrete flat complete all as specified and as directed. Note:- Formwork of column shall also be measured under this item.

Material and labour for mild steel TMT bars 10 mm dia and over cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia or securing with clips complete all as specified and as directed.

Material and labour for mild steel TMT bars 5mm dia and over and upto 10mm dia as in stirrups spacers and binders cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia or securing with clips complete all as specified and as directed.

Supply and fixing galvanized 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails, straining bolts including securing or tying at crossing with and provision of galvanized mild steel wire, staples or steel pins etc. complete all as specified and as directed. NOTE :- Each line of wire shall be measured.

Supply and fixing of razor punched concertina coil of 900 mm dia (before stretch), having 50 turns with approximate weight of 13.00 kg per coil, expanded to effective length 6-7 running meter per coil, core wire of dia 2.5 mm high tensile steel with 0.5 mm thick galvanised steel punched tape with 5 clipping points with and including galvanised MS stapple/clips complete all as specified and as directed.

Material and labour for hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to s teps including embeding in concrete and screwing etc. wind ties for roof including securingbolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc. flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc. and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed.

Material and labour for bitumen pad 25mm expansion joint filler board density 350kg/M³ with water absorption capacity 20% hardness 2800 Kpa as per IS -1838 complete all as specified and as directed.

Material and labour for preparing of new plastered surface of walls and applying two coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/ltr and UV resistance as per IS 15489 2004 Alkalı & fungal resistance, dirt resistance exterior paint of required shade (Company Depc: Tinted) with silicon additives @ 1.43 litre/10 Sqm over and including priming coat of exterior primer applied & 90 Itre/10 Sqm complete all as specified and as directed. Note: Work will be executed only by mechanised means/tools.

Material and labour for preparation of new or previously untreated steel surfaces of any description, over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide / zinc chrome primer complete all as specified and as directed.

Supply and fixing UPVC (SWR) pipes 110mm outside dia fixed to walls complete all as specified and as directed.

EXTERNAL ELECTRIC SUPPLY

Material and labour for sand cushioning in trenches for protection of LT under ground cable including punning and consolidation complete all as specified and as directed. Note:- Punned thickness shall be measured.

Supply and laying well burnt sub class 'B' bricks, locally available in trenches for protection of underground cable complete all as sepecified and as directed.

Supply and Laying HT Cable cover class HVP, type 1 with peak, size 300mm x 180mm x 40mm for protection of cable in trenches for under ground cable protection complete all as specified & directed.

Relaying HT cable cover for protection of cable in trenches for under ground cable protection complete all as specified and as directed.

Material and labour for taking out/re-routing and relaying the existing under ground HT XLPE cable, size upto 95/120 Sqmm 3 Core, Insulated and overall sheathed aluminium conductor, connecting and testing including taking out of cable cover complete all as specified and as directed. Notes:- (i) Excavation/earth work shall be measured & paid separately. (ii) Serviceable cable covers will be kept aside for re-use and unserviceable cover shall be taken under credit schedule.

Material and labour for taking out/re-routing and relaying the existing under ground LT XLPE cable, size upto 95 Sqmm 3.5 Core, Insulated and overall sheathed aluminium conductor, connecting and testing including taking out of cable cover complete all as specified and as directed. Notes:- (i) Excavation/earth work shall be measured & paid separately. (ii) Serviceable cable covers will be kept aside for re-use and unserviceable cover shall be taken under credit schedule.

Supply, laying and testing underground HT cable in replacement XLPE Insulated, screened PVC bedded galvanised steel strip or wire armoured electric power cable heavy duty 11000 volts (Earthed) grade, aluminium conductor of size 95 sqmm 3 Core complete all as specified and as directed. Note: Excavation and Earth works shall be measured & paid separately

Supply, laying and testing LT cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured electric power cable heavy duty with stranded aluminium conductor 1100/660 volts grade earthed system having cross sectional area 95 Sqmm 3.5 core laid in trenches/ducts/through pipes/ in floor/along with poles etc. complete all as specified and as directed. Note:- Excavation and earth work, sand cushioning and Gl pipe shall be measured and paid separately.

Supply, laying and testing LT cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured electric power cable heavy duty with stranded aluminium conductor 1100/660 volts grade earthed system having cross sectional area 70 Sqmm 3.5 core laid in trenches/ducts/through pipes/ in floor/along with poles etc. complete all as specified and as directed. Note:- Excavation and earth work, sand cushioning and Gl pipe shall be measured and paid separately.

Supply, laying and testing LT cable XLPE Insulated screened PVC bedded, galvanised steel strip or wire armoured electric power cable heavy duty with stranded aluminium conductor 1100/660 volts grade earthed system having cross sectional area 25 Sqmm 3.5 core laid in trenches/ducts/through pipes/ in floor/along with poles etc. complete all as specified and as directed. Note:- Excavation and earth work, sand cushioning and Gl pipe shall be measured and paid separately.

Supply and fixing in replacement of cable route indicator for HT UG Cable of 11000 Volts 80 mm dia CI Plate marked on HT cable bolted with 40 x 5 mm flat iron member of height 0.9 mtr, embedded in PCC 1:3:6 type C2 using 40mm stone graded aggegate of size 20 x 20 x 30 cm block complete all as specified and as directed.

Supply and fixing in replacement of cable route indicator for LT UG Cable of 1100 Volts 80 mm dia CI Plate marked on LT cable bolted with 40 x 5 mm flat iron member of height 0.9 mtr, embedded in PCC 1:3:6 type C2 using 40mm stone graded aggegate of size 20 x 20 x 30 cm block complete all as specified and as directed.

Material and labour for cable jointing kit fo 11KV (earthed) grade cable for straight through cold shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 95 Sqmm complete all as specified.

Material and labour for cable jointing kit for 11 KV grade cable for outdoor termination cold shrink type joint complete with jointing material and accessories suitable for 3 core XLPE, armoured, aluminium conductor cable of size 50 Sqmm to 95 Sqmm complete all as specified and as directed.

Material and labour for complete drilling hole under hard standing /road in different location as per site requirement (between 03 mtr to 20mtr maximum) for laying of pipe for protection of cable etc by boring tool and without disturbing the top surface and making good the disturbed surface complete all as specified. Supply and fixing Gl pipe, medium grade 40 mm bore, ISI Marked for protection to cable along the pole/across road crossing/passing through culvert complete all as specified and as directed.

Supply and fixing Gl pipe, medium grade 40 mm bore, ISI marked for protection to cable along the pole/across road crossing/passing through culvert complete all as specified and as directed.

Supply and fixing Gl pipe, medium grade 80 mm bore, ISI marked for protection to cable along the pole/across road crossing/passing through culvert complete all as specified and as directed.

Dismantling of old steel tubular/octagonal pole poles 9 m long by breaking PCC foundation and excavation complete with the help of hydraulic crane, setting aside for 50 m complete all as specified and as directed.

Dismantling and taking down street light shifting single/double of any wattage or size street light fittings for repair or replacement of burnt/worm out accessories or carrying to MES store complete all as specified and as directed. .

Material and labour for fixing of pole, 'J' type Bolts, single arm standard bracket & street light including excavation 0.45x0.45x1.5 Mtrs size, M20 cement concreting work vibrating concreting mixing with necessary steel (27.27Kgs) reinforcement for 9 Mtr octagonal pole including 2x63mm dia flexible PVC pipe of 0.5mtr for cable entry/exit at a depth 0.45 Mtr, TMT steel bar of 8mm dia to be placed at 190 c/c both ways for raft and 4 Nos vertical bar with 12mm dia bar stirrups/rings at 190c/c for columns complete with suitable PCC 1:3:6 lean concrete including of returning, filling in and removal of surplus soil to a distance not exc 50 m all complete all as specified and as directed. Note: Octagonal pole retrived from Item No.47

Supply and fixing 4 Nos of M24x700 Long 'J' type EN 8 grade foundation bolts along with template complete all as specified and as directed.

Supply and fixing unserviceable LED street light fitting upto 70 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed.

Fixing only LED street light fitting upto 70 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with Impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed.

Supply and fixing XLPE Insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 4 Sqmm 3 core complete all as specified and as directed.

Material and labour for shifting of electric panel from one place to another as directed by engineer in charge includes all necessary PCC work (size 1.2mx1.0mx0.4m), earth work, disconnection and connection of cables properly, using lugs, thimbles complete all as specified and as directed.

Material and labour for spray painting to LT panel board with synthetic enamel high glow paint first grade including preparation/cleaning of steel surfaces, complete all as specified and as directed.

Material and labour for earthing complete with and including galvanised steel earth plate electrode 60 cmx 60cm x 6 mm thick surrounded by mixture of charcoal and salt in altemate layers. buried directly in ground vertically in a pit of depth not less than 2.25 meter deep below ground level with top as of the plate at a depth of not less than 1.5 mtrs below normal ground level connected to galvanized iron or steel earth lead wire 4.0 mm dia, (NO 8 SWG) by means of bolts, nuts, check nuts and washers of galvanised iron or steel earth wire protected by galvanised steel pipe 15 mm bore (light grade) and connected to main switch or main control board all as shown in electrical plate No 3 of SSR- 2009(Part-I) & including necessary excavation and earth work,

Item No.56 (Contd...) also include charcoal and salt in altemate layers, 20 mm bore Gl pipe, light grade for watering, protection pipe funnel, wire mesh, PCC 1:2:4 type B1 chamber in cement concrete, 50 mm thick precast RCC M-25 (Normal max) cover duly reinforced with XPM (weight not less than 3 kg/sqm) and Cl frame etc, and including provision of test point, connecting to test point and testing on completion etc, complete all as specified and as directed. Note:- (ii) The unit rate include earthing lead and protection pipe upto 7.5 metre from top of earth plate.

Material and labour for earth continuity conductor or main earthing lead hard to wall on batten or recess or chases or buried in ground of drawn in conduit pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 4mm dia galvanised iron or steel wire complete all as specified and as directed.

Sudhir Sharma Associates (BID ID -3239677)

Ktech Engineer Builders Co. Pvt. Ltd (BID ID -3239768)

M M SHAWL Engineers and contractors pvt ltd (BID ID -3239779)

RAGHUSONS INFRA ENGINEERING PVT. LTD (BID ID -3239744)

VERMA BROTHERS (BID ID -3239488)

India Guniting Corporation (BID ID -3239680)

NSC Projects Pvt. Ltd. (BID ID -3239517)