Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹34.0 LAccepted-AOC 155 KARNAL NEW GRAIN MARKET KARNAL KARNAL HARYANA 132001 | KARNAL | HARYANA | 132001 | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹38.2 L+₹4.2 L (12.3%)Rejected-AOC C O GIVEN GOD NONGTDAU ARBUTHNOT ROAD NONGRIMMAW LAITUMKHRAH SHILLONG PIN 793011 | SHILLONG | EAST KHASI HILLS | MEGHALAYA | 793011 | L2 | Rejected-AOC Not Lowest Bidder | |
| 3 | L3₹43.4 L+₹9.4 L (27.6%)Rejected-AOC 34 KAISER GANJ MANDI DIST MEERUT UP 250002 | MEERUT | UTTAR PRADESH | 250002 | L3 | Rejected-AOC Not Lowest Bidder | |
| 4 | L4₹46.3 L+₹12.3 L (36.1%)Rejected-AOC 84 POLO HILLS OPPOSITE SBI BRANCH EAST KHASI HILLS SHILLONG MEGHALAYA 793001 | EAST KHASI HILLS | MEGHALAYA | 793001 | L4 | Rejected-AOC Not Lowest Bidder | |
| 5 | Rejected-Technical | - | Rejected-Technical Not Qualified |
Tender Value
₹43.5 L
EMD Value
₹87,000
Closing Date
16 Feb 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (I) (AF) Shillong
GE (I) (AF) Shillong Elephant Falls Camp PO Nonglyer Shillong-793009
CA NO. GE (I)(AF)/SHL/ OF 2022-23 ADDN/ALTN TO FRONT PORTICO OF BUILDING NO P-251 AT HQ EAC (U) UNDER GE (I) (AF) SHILLONG
2023_MES_576532_1
8085/22/SHL/2022/23
Open Tender
Civil Works
Item Rate
180 days
Shillong
For Enlisted Contractors Class D Category a i and for unenlisted contractors meeting enlistment criteria for required Class and Category
8 documents required · 8 mandatory
₹500
GE (I) (AF) Shillong
₹87,000
Yes
4 Mar 2023
21 Jan 2023
18 Feb 2023
21 Jan 2023
16 Feb 2023
4 Feb 2023
21 Jan 2023 - 28 Jan 2023
Amount
Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) in any position not otherwise specifically provided for complete all as specified and directed.
M & L for 20 mm thick screed bed or bedding layer in cement mortar 1:3 for laying floor finishes complete all as specified and directed.
Supply and fix APP polymeric water proofing membrane, minimum 3mm thick and weighing not less than 3.5 Kg/Sqm , black finish reinforced with non-woven polyester reinforcement matt, with a thermo fusable finish laid over compatible cold emulsion bituminous primer applied at the rate of 0.40 Kg/Sqm by torching with a propane or a butane gas torch, with a overlap of 75mm on longitudinal direction and 100mm on transverse direction including sealing all as per manufacturer’s instructions complete all as directed. Note: (i) Coved fillets in PCC(1:2:4) type B-0 using 12.5mm graded stone aggregate, of radius 75mm shall be provided at the junction of roof and parapet wall/mumty/chimney/other vertical surfaces and thereafter surface painted with hot paving bitumen of Grade 30/40 confirming to IS-73, [email protected] Kg/Sqm over a coat of bituminous primer confirming to IS-3384 applied @ 0.40 Kg/Sqm. (ii) Polymeric membrane shall be taken to a height of 45cm (minimum) and then inserted inside the groove of parapet wall of brick masonry and shall be finished by a membrane flushing. (iii) The waterproofing treatment shall be got carried out by the manufacturer or their authorized applicators. (iv) In case of stone masonry parapet wall etc a groove of size 25mmx25mm(minimuim) shall be made in coved fillet at the junction of roof and parapet wall/mumty Chimny/other vertical surfaces and polimeric membrane insterted in groove and sealed with paving bitumen (v) Exposed surfaces of APP membrane shall be applied with one coat of bituminous aluminium paint @ 100 Gms/Sqm. (vi) Above aspects are deemed to be included in quoted rate.
S & F PVC (SWR) 110mm bore pipes single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.
S & F PVC (SWR) bend for 110mm bore pipes of any radius with oval access door complete all as specified.
S&F Rolled sections Fe-290 Gde E-165 as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates, etc. complete all as specified and directed.
M & L for second class hardwood weather boarding, clean sawn, plain, 20 mm thick or feather edged 15 mm to 20 mm thick and fixed with 30 mm laps complete all as specified and directed.
M&L Rubber sheet 5.00 mm thick with fabric backing or insert and plain coloured or marbled topping, matt or glossy, laid in floors with approved adhesive complete all as specified and directed.
Excavation over areas n. exc 1.5 mtr deep in soft/loose soil and getting out complete all as specified and directed
Excavation over areas exc 1.5 mtr but n exc. 3.0 mtr deep in soft/loose soil and getting out complete all as specified and directed.
Excavation in trenches in soft / loose soil, not exc 1.5 m wide and n. exc 1.5 m depth or n exc 10 Sqm on plan & getting out, for laying of cables, foundations of poles, struts, stays etc. and getting out including triming and forming bottom surface complete, all as directed.
M&L for Plain Cement Concrete (PCC) 1:4:8 type D-2, (using 40mm graded crushed stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed.
M & L Reinforced cement concrete M-25 (design mix) using graded stone aggregate as in foundation including rafters footings foundation beam plinth beam bases for column etc basement slab under reamed piles and mass concrete complete all as specified and directed.
M & L for Reinforced cement concrete M-25 (design mix) using graded stone aggregate as in columns, pillars, posts and struts etc complete all as specified and directed.
M & L Reinforced cement concrete M-25 grade with 20 mm graded aggregate beams, cantilever, bressummers, lintels over 1.5 m span complete all as specified and directed .
M&L for Reinforced cement concrete M-25 (design mix) using 20mm graded stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies deck slabs, and in shelves and the like complete all as specified and directed.
M & L for Use and waste of flat formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work vertical or to batter for rough finished surfaces of concrete complete all as specified and directed.
M & L for Use and waste of flat formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough finished surface on circular on plan etc., complete all as specified and directed.
M & L for Use and waste of flat formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. for fair finished surfaces of concrete complete all as specified and directed.
M & L for Use & waste of Form work to soffits of suspended slabs such as roof slabs, floor slabs, landing horizontal or slopping similar work not. exc 200mm thick for flat fair finished surfaces complete all as specified and directed.
M & L for Use and waste of flat formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide for rough finished surfaces of concrete complete all as specified and directed.
Removing excavated surplus material to a distance exceeding 500mtr not exceeding 1.0 KM and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cms thick in soft / loose soil complete all as specified and directed.
M & L for TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed.
M & L for TMT bars 5 mm dia and over upto and including 10 mm dia in stirrups, spacers & binders, cut to length, bent to shapes required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
M & L for 20mm thick rendering in CM 1:4 on stone masonry surfaces or on other than fair faces of brick masonry surfaces mixed with WPC 3% by wt of cement and finished even and smooth without using extra cement complete all as specified and directed. (Note :- Supply only WPC shall be measured and paid separately)
Supply only integral water proofing compound ISI marked as approved complete all as specified and directed.
M & L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489 : 2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm over new surfaces complete all as specified and directed.
Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc.,of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed.
S & F 12 mm thick toughned glass as in hinged doors, partitions automatic doors, ss railings and similar work including cutting to shape, drilling holes required etc., complete all as specified and directed.
Hacking out old broken glass (any thickness size quality or description) from wooden frames or stone concrete or brick surrounds, glazed with putty or fixed with beeds complete all as specified and directed.
Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed.
Supply fabrication and fixing powder coated (Thickness of powder coating not less than 50 micron) anodized aluminium frame for doors, windows, ventilators with one or more rebates including jointing cleats for fixing etc complete all as specified and directed.
S & F 5.5mm thick sheet glass ordinary quality and glazing with oil putty in squares exc 0.5 sq. m in each pane complete all specified and as directed.
Dismantling of timber fillet, rails, post, rafters, purlins, etc. under 40 Sqcm in section unframed or framed work complete all as specified and directed.
M & L for second class hardwood plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails or brads section area exc 13 Sqcm but n.exc 25 Sqcm complete all as specified and directed.
M & L for French Polishing on old wooden or wood based surfaces of any description width or girth including cleaning and preparing the old surface with two or more coats complete all as specified and directed.
M & L for 15 mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes complete all as specified and directed.
M & L for non skid ceramic tiles (coloured) 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete all as specified and as directed.
M/s J. C. CONSTRUCTION
M/s Gupta Construction
M/s B.Citymai Syiem
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .