MISC REPAIRS TO PLASTERING FLOORING JOINERY WATER SUPPLY AND SANITARY FITTINGS INCL PETTY REPAIR WORKS TO BLDGS AT AFSSR GURGAON UNDER AGE BR GURGAON OF GE AF GURGAON

Amount

Easing and adjusting steel door frame and shutters including taking down shutter and refixing after necessary repair works complete all as specified and directed.

M&L for Welding in repairs n.exc 5 cm in length, any thickneess of metal to be welded for repair to doors, windows, railing etc complete all as specified and directed.

Supply only Butt Hinges, 100mm size, medium weight, cold rolled mild steel complete all as specified and directed

Dismantling mild steel work of any description not otherwise complete all as specified and as directed by Engr-in-charge.

S&F Plain black, mild steel sheeting 0.63mm thick, in repair to door, windows, railing, ridges, hips, Valley gutters, drip and straight flashings ( length and girth as fixed) complete all as specified and directed. Note:- Cost includes cutting of sheet in required size for repair to steel door,windows etc and fixing with welding.

S&F Framed work with steel Gde Fe-410-O or Fe-310-O as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging; also fastening and fixing complete all as specified and as directed.

M&L for preparation of old painted surfaces of wood & wood based surface of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed

M&L two coats of synthetic enamel painting on steel surfaces of any description over 10 cm in width or girth not otherwise described including prepration of surfaces

Taking down cement plaster of any description on brick walls, etc including raking out joints, hacking for key scrubbing down with water etc.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces on walls in CM 1:4. finishing even and fair cement complete all as specified and directed. Note:- Area includes in this items upto 4 stories of building.

M&L for rendering 15 mm thick on brick work or concrete surfaces on walls in CM 1:6 finishing even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 5 mm thick on fair faces of brick work or concrete surfaces on ceiling/ struts 1n patches in CM 1:3. finishing even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 10 mm thick in CM (1:3) on RCC Chajja / Facia / Roof projection over 20mm thick in CM 1:4 as doubing coat including cleaning of old wornout concrete,taking down plaster & applying a coat of RBR compund for proper bond of old and new concrete surface etc complete all as specified and as directed Notes : The Area includes in this items up to 4 th stories building.

M&L for three coats of white wash on New plaster surface of ceiling including prepration of surface.

M&L for One coats of white wash on old plaster surface of ceiling including prepration of surface.

M&L for One coats of oil bond distemper on old plaster surface of ceiling including prepration of surface.

M&L for preparing new plastered surface of walls/ceillings and applying two coat of oil bond distemper white or any tint over a coat of primer etc complete as specified and directed

M&L for completely removal of the existing treatment by wire brushing or sand paper or other scraping material as required from wall including prepration of surfaces complete as specified and directed.

M&L for preparing Old plastered surface of walls and applying two coat of oil bound distemper white or any tint etc complete as specified and directed

M&L for preparing Old plastered surface of walls and applying one coat of oil bond distemper white or any tint etc complete as specified and directed

M&L for 2mm thick birla white putty and making the surface smooth etc complete as specified and directed

M&L for preparation of newely plastered surface of wall and applying two coat of cement base paint complete all as specified and as directed. Notes : the Area includes in this items up to 6th storied building.

M&L for preparation of old plastered surface of wall and applying two coat of cement base paint complete all as specified and as directed. Notes : the Area includes in this items up to 6th storied building.

M&L for completely removal of the existing treatment from wall,chajjas,facia and preparing plaster surface of wall and applying two coat of exterior weather proof paint overr a coat of primer etc complete all as specified and directed. Note : the area includes in this items upto 4th storied building.

M&L for preparation of newly plastered surface of wall,chajjas,facia and applying two coat of exterior weather proof paint over a coat of primer etc complete all as specified and directed. Note : the area includes in this items upto 4th storied building.

Taking down Chowkats or frames from the opening of size not exceeding 1.5 sqm each with shutters ( without taking off shutters from the frames) complete all as specified and directed.

Taking down Shutters of any description of size exceeding 1 sqm and not exceeding 2 sqm each complete all as specified and directed

Taking down Shutters of any description of size exceeding 1 sqm and not exceeding 2 sqm each complete and refixing in the same opening after easing and adjustment all as specified and directed

Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specifica-tion & drawing complete all as specified as directed.

S&F Factory made solid panel pvc door shutter 30 mm thick (style) con-sisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be cov-ered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain col-our PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & draw-ing complete all as specified as directed.

S&F IInd class hard wood 35mm thick Plain framed, factory made, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply on both faces. (The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated) complete all as specified and directed

S&F 35mm thick flush shutter solid core construction with block board core and ply wood face panels, commercial type on both sides complete all as specified and as directed.

S&F IInd class hard wood Glazed and skeleton shutters 35mm thick divided into square, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.24 (a) ; supplied and fitted to chowkats complete all as specified and directed

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainles steel wire stapel etc complete all as secified and as directed

M&L for preparation of new wooden surface of any description, not other wise described over 10 cm widht or girth and applying two coats of synthetic enamel paint over a coat of pink primer etc complete all as specified and as directed

S&F Mild steel sliding door bolts 300mm long with hasp, staple (bolt type) , stove enameled black with bolt not less than 12mm dia with and including a minimum of 6 bolt and nut complete

S&F Mild steel barrel tower bolts, 150mm size, stove enamelled black, with bolt complete all as specified and directed

S&F aluminium anodised barrel tower bolt of extruded section 200mm size, stove enamelled black, with bolt complete all as specified and directed

S&F 150mm long mild steel pressed handle, oval type, stove enamelled complete all as specified and directed

S&F Aluminium handles, 150mm size cast type anodised complete all as specified and directed

S&F Double legged Floor door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring fixed to door shutter of size 140mm.

S&F stainless steel 100 mm long butt hinges for PVC door shutters and frames complete all as specified and directed by Engineer-in-Charge.

S&F in repair Butt Hinges, 100mm size, medium weight, cold rolled mild steel incl fixing with welding of screweing etc complete all as specified and directed

Dismantling of stone slabs and tiles of any description or thickness in floors, approachs, dado/Partitions etc complete all as specified and as directed

M&L for non-skid tiles ceramic coloured tiles 7 to 8 mm thick of size 400mmx400 mm as in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tiles including 15 mm thick screed bedding layers in CM (1:4) complete all as specified and as directed.

M&L for rendering 10 mm thick in cement mortar 1:3 on fair faces of brick work or concrete wall surface as backing coat of dado/skirting etc complete all as specified and as directed

M&L for Glazed ceramic tiles coloured 300mmx 450mm, 6 to 7 mm thick, set and jointed in neat cement slurry and pointed in white or colour cement to match etc on vertical surfaces such as skirting , dados and risers to steps etc. set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match etc complete all as specified and directed.

S&F in repair vitreous China Squatting pan 'Orrisa' pattren size 580x440mm white with integral foot rest, incl 'P' or 'S" trap cement concrete bedding complete all as specified and directed.

S&F in Repair white vitreous china Wash down water closet EWC type ( Pedestal pattern) white ,incl Pedestal pan and trap, connection to drain ( or outgoing pipe) and to flushing pipe , anti -syphonage pipe, etc., complete all as specified and as directed by Engr-in-charge.

S&F in repair vitreous China wash basin white, flat back size 550x400mm including S&F 32mm dia waste coupling, waste PVC pipe complete all as specified and as directed.

S&F in Seat Cover made with High Density plastic Seat cover, white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised or PVC hinging device complete all as specified and directed.

Checking and repair to leakages of each SMQ consist of Checking and repair to leakages in bib taps, mixer taps, stop cocks, angle valves, flushing cisterns, GI pipes, etc including removal of air lock/blockage of water in GI tubing, cleaning the pipe or fittings all connected plumbing works etc complete all as spd & directed. Note :- The cost of minor items like nails/hooks/nut bolts/screws/hexa blades/washers/plugs/ grease, safeda, thread (soot), M-seal, flush handles, sensor cell, check nuts, adhesive, white cement etc shall be deemed to be inclusive in the quoted rates only.

S&F in repair Seat Cover made with High Density plastic Seat cover, white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised or PVC hinging device complete all as specified and directed.

S&F in repair cast copper alloy chromium plated 15mm bore hand health faucet with 8 mm dia hose pipe tube & wall Hook complete all as specified and as approved by Engr-in-Charge.

Supply only 10 Ltr capacity PVC valveless symphonic action type flushing cistern white low level with ball valve float, handle including bracket complete all as specified and directed with glaged finish.

S&F in repair 10 Ltr capacity PVC valveless symphonic action type flushing cistern white low level with ball valve float, handle including bracket complete all as specified and directed with glaged finish.

Supply only Flush pipe of polythylene of low or high density or PVC,32mm dia for low level cistern.

S&F as in repair PVC syphonic action system (internal fittings) for PVC low level cistern including float valve, handle & connection rod etc complete all as specified and directed.

S&F in repair PVC connection 15mm size with PTMT nuts of length 450mm.

S&F in repair PVC connection 15mm size with PTMT nuts of length 600mm.

S&F in repair chromium plated shower roses 125 mm with or without swivel joints,any size including fixing to steel pipe or union for 15mm bore of pipe complete all as specified and directed.

S&F in repair Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F in repair waste fitting brass chromium plated of 32 mm dia for wash hand basin with long screwd shanks and fly nuts flange end bedded in red lead cement and other end fixed complete all as specified and directed.

S&F in repair waste fitting brass chromium plated of 40 mm dia for sink with long screwd shanks and fly nuts flange end bedded in red lead cement and other end fixed complete all as specified and directed.

S&F in repair 610 mm long PVC waste pipe flexible type 25mm dia suitable for coupling 32mm & 40 mm dia complete all as specified and directed.

S&F in repair MS bracket upto 450mm long for wash basin and sink incl Refixing of existing wash basin and sink and minor repair complete all as specified and directed by Engr-in-Charge.

S&F in repair brass spindle (face part) heavy duty for CP pillar cock,stop cock,Bib cock, wall mixer,basin mixer,conceled stop cock etc 15mm bore complete all as specified and directed.

S&F in repair polythene water storage tank 200 Ltr capacity 3 layer as approved by engr-in-Charge, closed top hoisted incl 15mm float valve,socket and fixed in position incl Dismantling of existing water tanks n.exc 250 Ltr complete all as specified and directed.

S&F rotational moulded polythene, triple layers, water storage tank 500 Ltr capacity 3 layer, closed top, cylindrical, hoisted and fixed in position incl S&F 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed incl Dismantling water tanks Exc 250 Ltr & not exceeding 500Ltr.

Disconnecting existing tanks upto 250 ltr capacity, setting aside (or lowering of required) for repairs , cleaning, etc. and hoisting if required reconnecting and refixing in position incl Cleaning and removing all scale and dirt, etc., from tanks and from mouths of circulating pipes, etc and write date of cleaning on tank complete all as directed by Engr-in-Charge.

Disconnecting existing tanks 500 ltr capacity, setting aside (or lowering of required) for repairs , cleaning, etc. and hoisting if required reconnecting and refixing in position incl Cleaning and removing all scale and dirt, etc., from tanks and from mouths of circulating pipes, etc and write date of cleaning on tank complete all as directed by Engr-in-Charge.

S&F in repairs 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed.

S&F in repairs 15mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed.

S&F in repair Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe 20 mm bore complete all as specified and as directed

S&F in repair Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe 15 mm bore complete all as specified and as directed

S&F and testing galvanised steel tubing 15mm bore “medium grade” with all fittings complete fixed to wall surfaced/concelled incl Taking down or up steel tubing 15mm bore and connections and complete all as specified and directed. Notes : The Area includes in this items to working in shaft portion upto 6th storied building.

S&F and testing galvanised steel tubing 20mm bore “medium grade” with all fittings complete fixed to wall incl Taking down or up steel tubing 20mm bore and connections and complete all as specified and directed. Notes : The Area includes in this items to working in shaft portion upto 6th storied building.

Taking down or up galvanised steel tubing 15mm bore medium grade and connection and cleaning the same and refixing the same in the same position/other position with all new fittings complete fixed to walls/ceiling or laid in floors complete all as specified and directed. Notes : The Area includes in this items to working in shaft portion upto 6th storied building.

Taking down or up galvanised steel tubing 20mm bore medium grade and connection and cleaning the same and refixing the same in the same position/other position with all new fittings complete fixed to walls/ceiling or laid in floors complete all as specified and directed. Notes : The Area includes in this items to working in shaft portion upto 6th storied building.

S&F in repair stop valves/angle valves fancy type chromium plated brass cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions fixed for 15 mm dia bore dia pipe complete all as specified and as directed

S&F in repair Stop valves, cast copper alloy, screwed down , high pressure, with crutch or butterfly handles , screwed both ends for iron pipe or for unions, fancy type, chromium plated with long shank and cup ( concealed type) and fixed 15 mm dia bore dia pipe complete all as specified and as directed.

S&F in repair Bib taps, cast copper alloy chromium plated, fancy type with crutch or butterfly handle , screwed down , scrwed for iron pipe or for brass ferrule and fixed for 15 mm dia bore dia pipe complete all as specified and as directed.

S&F 15mm bore Pillar taps fancy type, cast copper alloy, with long swan neck, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed all as specified and as directed

S&F in repair kitchen plate rack stainless steel 1 mm thick of size 90cmx75cmx30cm complete fixed to brick/concrete wall, with screw including rawl plug complete all as specified and as directed

S&F in repairs stainless steel decorative curtain rod of 25 mm bore including stainless steel finale & bracket etc complete all as specified and as directed

Dismantling of brickwork, built in cement mortar including all quoins, arches, pillars, etc. complete all as specified and directed

M&L for brick work with sub class "B" bricks (old size) straight or curved on plan exc 6 m mean radius, built in CM 1:6 complete all as specified and directed

M&L for Pre-Cast reinforced cement concrete 1:2:4 type B-1 with using 20 mm graded stone aggregates as in cover slabs (for manholes etc)chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plan faces set in cement mortar (1:4) including necessary use and waste form work etc complete all as specified and directed Note - Reinforcement shall be measured and paid separately

S&F mild steel TMT bars 8 mm dia., cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire ( annealed) not less than 0.90 mm dia. Or securing with clips complete all as specified and directed

S&F framed work such as grills, gratings, frames etc with ends of bars shouldered and or riveted or forged into spikes framed guard bars barred iron doors ladders framed balusters walk way railing frame work of water tanks,post and similar work confiming to Fe.290, Gde E-165 etc complete all as specified and as directed

Chaudhary Constructions

M/S GEETANJALI ENTERPRISES

PAWAN KUMAR

akhil enterprises

M/s KUNDU CONSTRUCTION

M/s Vijay Enterprises