WELCOME MAINTAINENCE TO OFFICERS MD ACCN UNDER GE MCEME SECUNDERABAD

Amount

M&L for preparation of old decorated surfaces of walls and cornices, spoiled by smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots by scraping and applying one coat of oil emulsion distemper (OBD),over one coat of primer over one coat putty not less than 3mm thick complete all as specified and directed by Engr-in-Charge.

M&L for Preparation of old decorated surfaces of ceiling, spoiled by smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots by scraping and applying one coat of oil emulsion distemper (OBD), complete all as specified and directed by Engr-in-Charge.

M&L for Preparation of old decorated surfaces of walls and cornices, spoiled by smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots by scraping and applying two coat of oil emulsion distemper over a coat of primer and over two coat wall care putty to make smooth, complete all as specified and directed by Engr-in-Charge.

M&L for preparation of old decorated surfaces of walls and cornices, spoiled by smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots by scraping and applying one coat of white wash , complete all as specified and directed by Engr-in-Charge.

M&L for preparation of old decorated surfaces of ceiling , spoiled by smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots by scraping and applying one coat of white wash , complete all as specified and directed by Engr-in-Charge.

M&L for preparation of old painted wood or wood based surfaces of any description over 10cm width or girth and applying one coat of Synthetic enemal paint, complete all as specified and directed by Engr-in-Charge. (Note : Work to be carried out from ground floor to fourth floor of bldg height)

M&L for preparation of old painted steel surfaces of any description over 10cm width or girth and applying one coat of Synthetic enemal paint, complete all as specified and directed by Engr-in-Charge. (Note : Work to be carried out from ground floor to fourth floor of bldg height)

M&L rendering 15mm thick in two layers (5mm thick in CM 1:4 with using water proofing compound over 10mm thick in CM 1:6) on external surfaces of of brick work or concrete surfaces even and smooth without using extra cement, including taking down cement plaster of any description incl raking out joints, hacking for key, scrubbing down with water, etc complete all as specificed and as directed by Engineer-in-Charge. (Note : WPC will be measured and paid separately, Work to be carried out from ground floor to fourth floor of bldg height)

M&L rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finishing the surface even and smooth without using extra cement including taking down cement plaster of any description incl raking out joints, hacking for key, scrubbing down with water, etc , complete all as specified and directed by Engr-in-Charge.

M&L for two coats of cement base paint over a coat of primer including preparation of newly plastered surface on walls, complete all as specified and directed by Engr-in-Charge. (Note : Work to be carried out from ground floor to fourth floor of bldg height)

M&L for preparation of newly plastered surfaces of walls and and applying Two coat of oil emulsion distemper (OBD) over a coat of primer, complete all as specified and directed by Engr-in-Charge.

M&L for rendering 5mm thick on fair faces of concrete surfaces in ceilings set in cement mortar 1:3 and finishing the surface even and smooth without using extra cement including taking down cement plaster of any description incl raking out joints, hacking for key, scrubbing down with water, complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new plastered surfaces and applying three coat of white wash on ceiling, complete all as specified and directed by Engr-in-Charge.

S&F in rep plastic water closet seat, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, etc complete all as specifed and directed.

S&F in rep vitreous china EWC white including flush pipe, seat cover etc, including connection to drain (or out going pipe) and to flushing pipe anti syphonage pipes, etc complete all as specificed and as directed by Engineer-in-Charge.

S&F in rep Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position, etc complete all as specificed and as per directed by Engineer-in-Charge.

S&F in rep vitreous China wash hand basin of size 550 x 400mm white flat back including chromium plated pillat tap, waste coupling, including brackets, PVC waste pipe, including cutting for and pinning in ends of brackets or errecting stand, complete all as specified and as directed by Engineer-in-Charge.

S&F in rep PVC (SWR) 100/110mm bore single socketed pipes in any length with rubber ring joints fixed to wall with pvc clamps including taking down old pipes, etc complete all as specificed and as directed by Engineer-in-Charge.

S&F PVC (SWR) bend/shoe for 100/110mm dia, etc complete all as specificed and as directed by Engineer-in-Charge.

S&F PVC (SWR) bend/shoe for 100/110mm dia, etc complete all as specificed and as directed by Engineer-in-Charge.

S&F in rep PVC (SWR) 75mm dia single socketed pipe including jointing with solvent cement including taking down old pipes, etc complete all as specificed and as per directed by Engineer-in-Charge.

S&F in repairs PVC (SWR) gully grap 125/110mm setting and jointing with solvent cement and preparation of trap hole, etc complete all as specificed and as per directed by Engineer-in-Charge.

S&F in repairs PVC (SWR) floor trap 75mm dia plain with grating including jointing with solvent cement and as directed

Taking up or down steel tubing & connections, 15 mm dia, etc complete all as specificed and as per directed by Engineer-in-Charge.

Taking up or down steel tubing & connections, 20 mm dia, etc complete all as specificed and as per directed by Engineer-in-Charge.

Taking up or down steel tubing & connections, 25 mm dia, etc complete all as specificed and as per directed by Engineer-in-Charge.

Supplying and laying of CPVC pipes SDR 11 and plain CPVC SDR 11 fittings, outer dia 20mm, on walls/ceiling or laying in floors, etc complete all as specificed and as per directed by Engineer-in-Charge.

Supplying and laying of CPVC pipes SDR 11 and plain CPVC SDR 11 fittings, outer dia 25mm, on walls/ceiling or laying in floors, etc complete all as specificed and as per directed by Engineer-in-Charge.

S&F steel water tubing medium grade galvanised with all fittings and fixed complete to walls or laid in floors bore of pipe 15 mm, etc complete all as specificed and as per directed by Engineer-in-Charge.

S&F steel water tubing medium grade galvanised with all fittings and fixed complete to walls or laid in floors bore of pipe 20mm, etc complete all as specificed and as per directed by Engineer-in-Charge.

S&F steel water tubing medium grade galvanised with all fittings and fixed complete to walls or laid in floors bore of pipe 25mm, etc complete all as specificed and as per directed by Engineer-in-Charge.

Cutting chases ,pinning in making good to facing where required of brick walls and pointed in cement mortar 1:3 for concealed water tubing etc cutting not exc 10 cm girth, etc complete all as specificed and as per directed by Engineer-in-Charge.

S&F in rep low density poly ethylene pipes (LDPE) of pressure rating 6 kg/ cm2 laid in trenches, Bore of pipes in 40mm, including taking down old pipes, etc complete all as specified and as per directed by Engineer-in-Charge.

S & F in rep for PVC connections 15mm size with PTMT nuts of length 600mm, etc complete all as specifed and directed.

S&F in repairs chromium plated fancy type stop cock copper alloy 15mm bore screwed down high presure with crutch or butterfly handle screwed both ends for iron pipes, etc complete all as specificed and as per directed by Engineer-in-Charge.

S&F in rep CP bib taps cast copper alloy with crutch or butterfly handle, screwed for iron pipe of dia 15mm, fancy type, etc complete all as specificed and as per directed by Engineer-in-Charge.

S&F in repairs 15mm bore Fancy type pillar taps, long shank (swan neck), Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed.

S&F in repair 15 mm CP brass two way angle cock stop valve all as specified and directed by Engineer-in-Charge

S&F in repair Brass chromium plated shower rose 125 mm size with or without swivel joints , any size including fixing to steel pipe or union, etc complete all as specificed and as per directed by Engineer-in-Charge.

S&F in repair, PVC valveless, 10 litrs, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, etc complete all as specified and as per directed by Engineer-in-Charge.

S & F in rep Grating doom 100mm dia of PTMT (Minimum weight 25gms), etc complete all as specified and as per directed by Engineer-in-Charge.

S&F in repairs Gun metal globe or gate valve 20mm bore dia of pipes, with iron wheel head screwed both ends for iron pipe and fixed, etc complete all as specified and as per directed by Engineer-in-Charge.

S&F in repairs Gun metal globe or gate valve 25mm bore dia of pipes, with iron wheel head screwed both ends for iron pipe and fixed, etc complete all as specified and as per directed by Engineer-in-Charge.

Cleaning and removing all scale and dirt, etc. from tanks and form mouths of circulating pipes. With bleaching powder exc 500 ltr and n.exc 1000 ltr , etc complete all as specified and as per directed by Engineer-in-Charge.

Cleaning and removing all scale and dirt, etc. from tanks and form mouths of circulating pipes. With bleaching powder exc 250 ltr and n.exc 500 ltr , etc complete all as specified and as per directed by Engineer-in-Charge.

S&F in repairs 20mm ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . / 25mm-455gms/ 40mm - 690 gms) complete, screwed for iron pipe or for brass ferrule of 20mm dia, etc complete all as specified and as per directed by Engineer-in-Charge.

S&F in repairs 25mm ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . / 25mm-455gms/ 40mm - 690 gms) complete, screwed for iron pipe or for brass ferrule of 20mm dia, etc complete all as specified and as per directed by Engineer-in-Charge.

S&F in rep CP curtain rail / drapery rod 20 mm dia and 1.5 mm thickness of approved pattern along with decorative SS brackets of approved quality and pattern fixed with screws, etc complete all as specified and as per directed by Engineer-in-Charge.

S&F in rep SS soap dish, any type, fixed to plugs with chromium plated brass screws, etc complete all as specified and as per directed by Engineer-in-Charge.

S&F in rep CP brass tubular towel rail 600mm long 20mm dia 'D' type in repairs complete all as specified

S&F in repair MS Box Type Hinges suitable for MS window including Welding, easing to window shutter at height of 4th floor of the bldg, etc complete all as specified and as per directed by Engineer-in-Charge.

S&F in rep 40mm dia, cupboard knobs fixed with nut, screw and washer of brass, polished all as specified and as directed.

Dismantling boarding, any description fixed in any position with nails, complete all as specified and directed by Engineer-in-Charge.

M & L for 18/19 mm thick, Prelaminated particle board, interior grade,prelaminated one side with decorative choice lamination & other side balancing white lamination,fixed with screws to timber frame work, complete all as specified and directed by Engineer-in-Charge.

S&F continuous (Piano ) Hinges 30 mm width of flaps, mild steel bright finish or elecrogalvanised complete all as specified

S&F 100mm aluminium barrel tower bolts, stove enamelled black, with bright bolt and fixed.

S&F 100 mm size Hasp and staple, Aluminium anodised, wire type, including bolt to hinge plate and fixed with screws complete all as specified and as directed.

S & F 40mm dia, cupboard knobs fixed with nut, screw and washer of brass, polished all as specified and as directed.

Taking down chowkhats or frames not exc 1.5 sqm each(without taking off shutters from the frames), etc complete all as specificed and as directed by Engineer-in-Charge.

Taking down, Chowkhats or frames exc 1.5 sq. m but n exc 4 sq. m each but with shutters (without taking off shutters from the frame), etc complete all as specificed and as directed by Engineer-in-Charge.

S&F prepainted steel windows/ventilators ( ECO–4000 Series Windows (Double Rebate Windows) or equivalent) fabricated from roll framed sections made of galvanized steel colour coated/powder coated (Base steel as per IS-513 “D” quality galvanized as per IS-277 with zinc of 120 gms/Sqr. Mtr.) with total coated thickness of 0.58mm. Sections for Frame should be of 72x55mm, Section for Mullion should be of 72x50mm, Section for Shutter Frame should be of 47mm x 20mm, Section for Fixed Glass Bead should be of 12x12mm, and Section for Fly Mesh should be of 40x20mm Section for Frame Glazed Shutters and Mesh Shutters should be cut to length and miter joined with Polypropylene Corner Brackets, Mullion Section should be joined with Frame/Mullion using Mullion Cap Ethyl Propylene Damien Monomer (EPDM) Gasket should be used all around glass in shutter and Fixed Glass. Spoon Section should be used around Fly mesh to fix Mesh in Mesh Shutter including SS Pivot Hinges–1 set, Seccolor Handle & Seccolor Stay and 4mm Plain Float Glass and Stainless Steel 32 gauge Fly mesh of 25 holes per SqCM and powder coated Grill made of 10mm sq. MS Bars welded at 150mm c/c, 6x12mm MS flat and fixed to window frame with screws , complete all as specified and directed by Engineer-in-Charge. (Make : NCL/TATA/Equivalent)

M&L for Solid PVC door frame of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube suppling and fixing in opening as per specification and drawing, etc complete all as specificed and as directed by Engineer-in-Charge.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing in SSR complete all as specified and directed by Engineer-in-Charge.

S&F for Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21, size of hinges in 100mm, etc complete all as specificed and as per directed by Engineer-in-Charge.

S&F 250mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed, etc complete all as specificed and as per directed by Engineer-in-Charge.

S&F 150mm long aluminium anodised, barrel tower bolts of extruded section, etc complete all as specificed and as per directed by Engineer-in-Charge.

S&F aluminium handles 150mm long fabricated type anodised, etc complete all as specificed and as per directed by Engineer-in-Charge.

S&F in rep Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, etc complete all as specifed and directed.

S&F in rep 8mm thick glass corner, radius not exceeding 300mm dia with SS brackets/rail as directed by Engineer-in-Charge

S&F in repair PVC Box type mirror cabinet 450x350 mm size modular type and as directed

M&L for preparation of old decorated surfaces of walls and applying one coat of acrylic emulsion paint weather proof on walls etc , complete all as specified and directed by Engr-in-Charge. (Note : Work to be carried out from ground floor to fourth floor of bldg height)

M&L for preparation of old painted wood or wood based surfaces of any description over 10cm width or girth and applying one coat of french polish / Varnish , complete all as specified and directed by Engr-in-Charge. (Note : Work to be carried out from ground floor to fourth floor of bldg height)

M/S C MALLIAH & SONS (BID ID -3316055)