WBPHED/AE/BMSD/NIeT-3 OF 2025-2026/7

Amount

Supply delivery fitting fixing LED light fixture 90W, 110lm/w having pressure die cast Al. housing pot optical reflector and heat resistant toughened glass cover complete set. Make-Approved vendor list.( (Model no-BRP333 LED110 CW R5C FG PSU S1 SPD))

Supplying & Fixing GI waterproof type looping cable box size 200x150x100 mm deep having 4 mm thick comprising of one 250 V 15 A kit-kat fuse unit, one NL on porcelain insulator, one compression type brass cable gland for upto 2- core 16 sqmm PVC/A cable and having lined with rubber gasketted GI top cover with brass machine screws etc., earthing terminal with lug, on steel tubular pole near base, including S&F 40x6 mm thick, MS clamps with bolts, nuts etc. including painting with anticorrosive paint

Supply and delivery of 6 sq.mm. 4 core XLPE insulated Ar. AL conductor cable, Make: As per Approved vender list

Laying of one No. cable 6 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below : For 4 core 6 sqmm cable

Supply and delivery of 40mm dia UPVC SCHE 80 pipe for protection of cable.

Supply and inter connection of power line from light fixture to jointing box by the 1.5 sq mm x 3 nos pvc insulated FRLS 1.1 kv grade copper flexible cable

Cutting out of lean or bend, damaged steel tubular pole by gas cutter and welding with short pice to make as per requirement length or as per direction of EIC. Rate are including of short pice, hiring of generator, and others related item to complete the job.

Supply delivery and fitting fixing 40 mm dia 1.5 m long MS Arm bracket on the top of the Laboratory house by supplying all necessary materials and painted anticorrosive paint.

Erection of Single tubular pole of length as given below with/without sole plate & Cap etc. in CC foundation (Proportionand dimension indicated below), having 600 x 600x150 mm thick CC (4:2:1) base block below sole plate/pole with hard jhama metal including CC (6:3:1) muffing 0.30 mts. dia and 0.30 mts. above ground level including 3 mm thick neat cemented finishand GI earth bolt after making drilled holes etc. on pole & carriage of pole upto 1.6 Km from Store to work-site including filling up the excavated earth pit with shifted soil and ramming properly Upto 9.0 mtr. Size 0.6x0.6x1.70 mts

Extra on items 1 & 2 above, for providing CC (6:3:1) base block (around the pole) dimension 0.60 x 0.60 x 0.76 mt. above ground level, neatly cemented finish (3 mm thick), at the base pole (in lieu of CC muffing) suitable for alkathene/ polythene pipe entry as directed for street light wiring, incl. S & F 25cm x 25cm x 10cm GI Loop box, 16SWG & incl. drilled hole in pole

Painting of Steel Tubular Pole of lengths and no. of coats of paint,as given below with ready mixed paint/primer of approved make, and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. for receiving fresh coat of paint Upto 9.0 mtr. long pole

i) One coat of red lead/Zinc chromate priming

ii) 1st coat of synthetic enamel paint over the primer

ii) 2nd coat of synthetic enamel paint over the 1st coat

Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment a) 2+6 way Make-ABB/Havels/L&T/Legrand

Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection A) 40 A (TPN) Make-ABB/Havels/L&T/Legrand

Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection A) 6-10 A (SPN) Make-ABB/Havels/L&T/Legrand

Add: 18% GST

Add: 1% Cess

PRADIP KUMAR DHABAL (BID ID -6377299)

M/S NABIN GOPAL SENGUPTA (BID ID -6377286)