REPAIR TO PLASTERING, JOINERY, ROOF, FALSE CEILING, FLOOR, PLUMBING, GI TUBING, PERIODICAL SERVICES IN OTM ACCN, D ZONE AND CERTAIN OTHER AREAS UNDER AGE B/R-II OF GE BENGDUBI MIL STN

Amount

SCHEDULE 'A'

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc and including removal of debris and rubbish from the site etc complete all as specified and directed.

M&L for rendering 10mm thick on concrete surfaces of Chajja/Facia of chajja etc., in cement morter 1:4 finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15 mm thick in CM (1:6) on fair faces of brick work or concrete surface finsihed even and smooth (without using extra cement) etc complete all as specified and directed.

M&L for rendering 5 mm thick in CM (1:3) on concrete surface of ceiling, finsihed even and smooth (without using extra cement) etc complete all as specified and directed.

M&L for rendering 15 mm thick in CM (1:4) on fair faces of brick work or concrete surface finsihed even and smooth without using extra cement mixed with water proofing compound as per manufacture instruction etc complete all as specified and directed (Notes : WPC shall be measured and paid seperately)

Blank

Dismantling of floor, hearth or wall tiling / Paving Blocks including cement mortar bedding (but not backing), removing serviceable tiles from site outside MoD land and rubbish off the premises etc complete all as specified and directed.

M&L for Non Skid ceramic tiles (coloured) 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured non skid ceramic cement to match complete all as specified and directed.

ditto all as per item no 8.00 above but on dado /skirting, set jointed in neat cement slurry and pointed with colour cement to match the tiles complete all as specified and directed.

M&L for Non Skid ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for coloured glazed ceramic tiles (350mm x 450mm) x 7 to 8mm thick as in dado/vertical services set and jointed in neat cement slurry and pointed in coloured cement to match the surface complete all as specified and directed.

Dismantling of stone slabs and tiles of any description or thickness in floors, approachs, dado / Partitions etc complete all as specified and directed

M&L for granite (of any type) stone slab 16 to 18mm thick (table rubbed and polished), in skirting, Kitchen platform / dado etc laid over cement screed bed jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding the edges half round and polishing including etc complete all as specified and directed.

M&L for screed bed or bedding layer of mortar 15mm thick in CM 1:4 for laying floor finishes complete all as specified and directed.

M&L for rendering 10 mm thick in cement mortar 1:3 on fair faces of brick work or concrete surface as backing coat coat of dado/skirting etc complete all as specified and directed.

Dimantling of Asbestos cement (corrugated ted, semi corrugated, etc.) sheets in roof coverings including ridges etc complete all as specified and directed.

S&F 6 mm thick Asbestos cement, corrugated or semi corrugated sheets in roofs, walls etc fixed with L type or J type or cranked hook bolts etc complete all as specified and directed.

Fixing only 6 mm thick Asbestos cement, corrugated or semi corrugated sheets in roofs, walls etc fixed with L type or J type or cranked hook bolts etc complete all as specified and directed.

S&F Asbestos cement one pieces plain angular ridge fixed with L-type or J -type hook bolts in roof coverings complete all as specified and directed.

S&F Pre-painted coloured trapezoidal profiled Galvalume / Zincalume sheet with min thickness of 0.50 mm TCT confirming to IS-513 (AZ-150 GSM, AI Zn alloy mettalic coating with 550MPA yield stress as per AS-1397) as in roof covering/cladding to wall fixed with self tapping screws colour/exterior coat of silicon modified polyster/BHP x RW paint system 20 micron top coat applied over 5 micron primer and 5 micron poyster back coat applied over 5 micron primer, all fixed with Galvanised self drilling self tapping fastener (12-14 x 55 with EPDM seals) complete as specified etc complete all as specified and as directed.

S&F Pre-painted coloured plain profiled Galvalume / Zincalume sheet with min thickness of 0.60 mm TCT confirming to IS-513 (AZ-150 GSM, AI Zn alloy mettalic coating with 550MPA yield stress as per AS-1397) as in roof ridge colour/exterior coat of silicon modified polyster/BHP x RW paint system 20 micron top coat applied over 5 micron primer and 5 micron poyster back coat applied over 5 micron primer, all fixed with Galvanised self drilling self tapping fastener (12-14 x 55 with EPDM seals) complete as specified etc complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for etc complete all as specified and directed.

S&F for rolled sections as in main and cross beams, hip and jack rafters; purlins, Gusset plate and base plates, where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates, Fe-410-Wgde -E-250) quality 'B' includng welding or riveting etc complete all as specified and directed.

M&L Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290. Gde-E-165 etc complete all as specified and directed.

S&F Hard drawn steel wire fabric in available size weight not exc 4.00 Kg /sqm fixed in tank caging including welding, riveting, framing etc complete all as specified and directed.

S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, Fe410 - W (Gde-E- 250 quality-A), drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc) or insulation oards/slabs/ blankets, any thickness including cover fillets etc complete all as specified and as directed

S&F 4mm thick non asbestos fibre cement designer building boards fixed or laid/inserted to timber/GI/aluminium framework wih screws complete all as specified.

S&F of Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutter from frames) not exc. 1.5 sqm each, including cutting holes for removing the hold fast etc complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutter from frames) exc. 1.5 Sqm but n exc 4 Sqm each, including cutting holes for removing the hold fast etc complete all as specified and directed.

Taking down shutter of any description area exc 1.00 Sqm and not exc 2 Sqm each and removing from site complete etc complete all as specified and as directed.

S&F 1.25 mm thick pressed steel frame of size 165 X 60 mm for door with one ore more rebate includings necessary fixing lugs, hinges, locks strike plate etc complete all as specified and directed.

M&L 2nd class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed.

M&L for cement concrete 1:3:6 type C-2 (using 20mm graded aggregate) as in hold fast and filling of pressed steel chowkat etc., complete all as specified and directed

S&F 35mm thick flush shutter solid core construction with block board core and ply wood face panels, commercial type on both sides kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F 2nd class hard wood 30 mm thick made glazed and skeleton shutters open rebated and prepared to rceieve glass, gauze,etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass,etc, size of members of shutters as spfd in SSR Part-1, Section 8, clause 8.24 (a) kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F 25mm thick flush shutter, solid core construction with block board core and plywood face panels, commercial type on both sides kiln seasoned and chemically pressure treated including wooden beading os 2nd class hard wood around the shutters complete all as specified and directed.

M&L 19/20mm thick Pre laminated exterior grade both sides laminated with decorative choice laminations fixed with screw to timber or angle iron frame as in cupboard shutter, shelve, kitchen cabinet etc including wooden beading os 2nd class hard wood around the board complete all as specified and directed

S&F Decorative fancy type drawer handle for kitchen cabinate handle 150mm long of stainless steel all as specified.

S&F PVC door frame of size 50 x 47 mm with a wall thickness of 5 mm (+0.25mm) Density 600 Kg/Cbm manufactured by a ISO-9001-2015 certificate company, made out of single piece extruded PVC Foam profile, with mitred cut joints and joints with 2 nos of bracket of size 190 mm x 100 mm long arms of cross section size 35 x 15 mm & self driven self taping screws, or fusion heat welding process, the vertical door profiles to be reinforced with 33 x 17mm M.S rectangle tube of 19 Guage. The door frame to be fixed to be wall using 8 x 100 mm long anchor fasteners complete, all as per manufacturer’s specification and direction of Engineer-in-charge.

S&F Factory Made Solid PVC Molded Door Shutters 28 to 30 mm thick (stile, with 2,4 or 6 raised panel design with 2mm thick Molded PVC Sheet on the front Face & 2mm Plan color PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing etc complete all as specified and as directed.

S&F standard aluminium powder coated section (minimum thickness of powder coating shall be 50 micron and colour shall be approved by Garrison Engineer as in frame, shutters for Door/ Windows / Ventilators, fixed/openable/sliding or any pattern, cut to size, jointed with cadmium plated steel screws, including rubber beading or gaskets for fixing glass and stainless steel wirecloth, provision of hinges, screws, plugs, handle, lock, roller, Nylon ball bearing etc complete all as specified and directed. Note : (i) Weight of Aluminium sections as per actual or as per IS or as per Manufacturer whichever is less, shall only be considered for payment. (ii) Cost of all the items/ accessories required for the entire completion of the work shall be deemed to be included in the quoted rate. However glass panes and wirecloth shall be measured and paid separately under respective items. (iii) The accessories (Aluminium mongries etc) required to be provided for window, vents and doors as per directions of Engineer-in-charge all be provided but weight for the same shall not be considered and no extra cost will be paid for the same.

S&F for Steel ventilators with top hung shutter including hinges, steel peg stay, complete all as specified and directed.

Making good steel windows/ventilator Z section by taking down and refixing including cutting/welding if required and made good to smooth functioning including replace of minor fittings (hinges, handle, stay etc.) of the window complete all as specified and directed.

Hacking out old broken glass (any thickness size quality and discription) for metal frame including punching, drilling out old glazing pins / spring clips and providing new ones complete all as specified and directed.

S&F 3 mm thick sheet glass ordinary quality and glazing with wooden beads or oil putty insquare not exc. 0.5 sqm in each pane.

S&F 4 mm thick figured glass pin headed type and glazing with oil putty in square not exc 0.5 Sqm in each pane.

S&F 4mm thick sheet glass of ordinary quality and glazing with oil putty or wooden beading to wooden frame or steel frame in squares n exc 0.50 sqm in each pane complete all as specified and directed.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainles steel wire stapel etc complete all as secified and directed.

All as per Item No. 50.00 here-in-before but fixed in repairs including cutting/welding of steel window shtters if required at site etc., all as secified and directed.

S&F Aluminium anodised tower bolt 200 mm long of extruded section etc complete all as specified and directed.

S&F Aluminium anodised tower bolt 150 mm long of extruded section etc complete all as specified and as directed.

S&F aluminium alloy, anodised sliding door bolt 250 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy etc complete all as specified and directed.

S&F 100 mm thick butt hinges, medium weight, stainless steel and fixed etc complete all as specified and directed.

S&F 150 mm long aluminium handle, cast type, anodised etc complete all as specified and directed.

S&F 150 mm long Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

S&F bal catches with 8 mm dia steel ball magnet catches for cuboard shutter including strking plate as approved etc complete all as specified and directed.

S&F stainless steel plate rack of size 600mm x 900mm x 250mm including fixing to walls complete all as specified and as directed.

Demolition of brick work or rubbled stone masonry including all quoins arches, pillars etc built in cement mortar and including removal from the site complete all as specified and directed.

M&L for brick work with fly ash brick, straight or curved on plan exc 6.0 mtr mean radius built in CM 1:6 etc complete all as specified and directed.

M&L for brick work with fly ash brick, straight or curved built in CM 1:4 as in half brick thick walls complete all as specified and directed.

Taking down steel tubing & connections including cleaning for refixing serviceable pipe or removal balance pipe of 15 mm dia bore complete all as specified and directed.

Ditto all as per item No. 63.00 here-in-before but 20 mm dia bore.

Ditto all as per item No. 63.00 here-in-before but 25 mm dia bore.

S&F 15 mm dia bore pipe, medium grade, galvanized steel tubing (concealed) with all fittings & fixed complete to walls & ceiling or laid in floors (including in short length) complete all as specified and directed.

Ditto all as per item No. 66.00 here-in-before but 20 mm dia bore pipes (without concealed).

Ditto all as per item No. 66.00 here-in-before but 25 mm dia bore pipes (with out concealed).

Dismantling water tanks exc 250 ltr but not exc 500 ltr and removing to store etc complete all as specified and as directed

S&F rotational moulded PVC water storage tank 500ltrs capacity conforming to IS-12701(1989) cylindrical vertical type double-layered with closed top including inlet,outlet and wash out holes of approved make hoisted and fixed in position all as specified in SSR Part I etc completge all as specified and directed.

S&F Ball valves 20mm bore high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 15mm-142 gms/ 20mm-210 gms/25mm-455gms/ 40mm- 690 gms) etc complete all as specified and directed.

Blank

S&F in repair ball brass valve, high pressure, with ploythene float and flynut complete, screwed for iron pipe or brass ferrule 20 mm bore complete all as specified and directed.

S&F in repair Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe 20 mm bore and fixed as in repair complete all as specified and directed.

S&F in repair Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe 25 mm bore and fixed as in repair complete all as specified and directed.

S&F in repair sinks made of stainless steel 0.80mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm etc complete all as specified and directed.

S&F in repairs vitreous china wash down water closet European type (Pedestal Pattern) white (excluding flushing cistern & flush pipe) incl connection to out going pipe, & seat cover and flushing pipe complete all as specified and as directed (CAT No CNS-WHT-551SN Make- JAQUAR or equivalent)

S&F in repair counter top wash hand basin white flat of size 545X545X180mm excluding taps but including 32 mm dia chromium plated waste fitting and PVC waste pipe 610 mm long and MS brackets complete all as specified and directed (CAT NO. FSS-WHT-29601, MAKE - JAQUAR or equivalent)

S&F in repair white vitreous china wash basin white flat back size 550x400 excluding taps but including 32 mm dia chromium plated waste fitting and PVC waste pipe 610 mm long and MS brackets complete all as specified and directed.

M&L for sealing bolt holes or other similar holes in old Asbestos cement sheets by sealing with one bitumen and one plain G.I. washer on either side and 8mm dia bolt and nut, bolt not exceeding 25mm in length complete all as specified and directed.

M&L for Bitumastic gola, with 80/25 bitumen and coarse sand mixture. 1:3 by weight, 8cmx8cm at the junction of roofing to vertical surfaces complete all as specified and directed.

S&F in repair PVC valveless double syphonic action type flushing cistern low level of 10 Ltr capacity white with inlet ball valve, float, flushing bend & handle including brackets, suitable for both Indian Type Water Closet & Europeon Type Water Closet including brackets & connection to pipe etc complete all as specified and directed.

S&F in repair PVC connection of 45 cm length including brass nuts complete all as specified and directed.

M&L for cement concrete 1:2:4 type, B1 using 20 mm graded stone aggregates as in copings, Chajja kerbs, roof padding/staging of water tank etc including necessary fromwork, weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.

Supply only water proofing compound (Liquid) complete all as specified and directed.

M&L for brushing neat cement slurry with 3.00 kg of cement per Sqm over roof surfaces and sunken floor etc, providing 20mm thick plastering in cement mortar 1:4 mixed with liquid water proofing compound, finished even and smooth complete all as specified and directed. (Note: Supply only water proofing compound shall be measured and paid seperately)

M&L cement concrete 1:5:10 type E-2 using 20mm granded brick aggregates as in sunken portion of WC etc complete all as specified and directed.

M&L for applying and evently bituminous tack coat @ 1.20 Kg/Sqm of industerial bitumen blinded with 0.006 cum of course sand per sqm on the surfaces of sunken floor complete all as specified and directed.

M&L for 75 mm thick plain cement concrete 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) as in plinth protections, finished even and smooth w/o using extra cement with joints 10 mm wide and in full depth at corners and @ 3.0 m c/c filled with mastic mortar complete all as specified and directed.

Taking down PVC rain water pipes ( any size or pattern) including all fittings head shoes etc complete all as specified and directed.

S&F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber rings joints fixed to walls complete all as specified.

S&F in repair 110 mm dia PVC (SWR) bends with rubber rings joints fixed as required complete all as specified and directed.

S&F in repair for 75 mm bore out let cast floor trap with gratings including including jointing to waste pipe fixed in cement concrete tpe B-1 (1:2:4) etc complete all as specified and directed.

S&F in repairs PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement etc complete all as specified and directed.

S&F in repairs PVC rain water vally gutter of size 150 mm dia half round type, fixed with steel stay etc complete all as specified and directed.

S&F in repairs stainless steel decorative curtain rod of 25 mm bore complete all as specified and directed.

S&F in repairs stainless steel decorative curtain brakets and end cap complete all as specified and directed.

S & F 50 mm dia PVC (SWR) pipes single socketed in any length with rubber rings joints fixed to walls complete all as specified

S&F in repair bib tap fancy type cast copper alloy chromium plated with crutch or butterfly handle screwed down screwed for iron pipe or brass ferrule or fixed for 15 mm dia bore pipe complete all as specified and as directed

Ditto all as per item No. 99.00 here-in-before but tap 2 in 1 of 15mm bore complete all as specified and directed. (Make : Marc or equivalent)

S&F in repair 15mm dia bore of pipe stop valves /angle valves fancy type chromium plated brass cast copper (Concealed type) alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions fixed complete all as specified and directed.

S&F in repair 20mm dia bore of pipe stop valves /angle valves fancy type chromium plated brass cast copper (Concealed type) alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions fixed complete all as specified and directed.

S&F in repair 15mm bore Pillar taps fancy type, cast copper alloy, with long swan neck, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed all as specified and directed.

S&F in repair wall mixture with provision for overhead shower with 115mm long bend pipe on upper side, connecting legs and wal flange of 15mm bore etc complete all as specified and as directed (CAT NO FUS-29273UPR, MAKE : Jaquar or equivalent)

S&F in repair sink mixture with swinging casted spout (wall mounted model with connecting legs and wall flanges of 15 mm bore etc complete all as specified and as directed (CAT NO SOL-6309 MAKE Jaquar or equivalent)

S&F in repair centre whole bassin mixture without popup waste system with 450mm long bradied hoses of 15mm bore etc complete all as specified and directed (CAT NO FLR- 5167NB Make Jaquar or equivalent)

S&F in repair towel ring round with round flanges etc complete all as specified and directed (CAT NO CAN-1121BN of MAKE Jaquar or equivalent)

S&F in repair single towel rail 600 mm long etc complete all as specified and directed (CAT NO ACN1111NM of Make Jaquar or equivalent)

S&F in reapir soap dish holder etc complete all as specified and directed (CAT NO 525 CAN-1131N of Make Jaquar or equivalent)

S&F in repair toilet roll paper holder etc complete all as specified and directed (CAT NO.ACN-1143N of MAKE-JAQUAR or equivalent)

S&F in repair glass shelf 600 mm long etc complete all as specified and directed (CAT NO CAN-171N of MAKE-JAQUAR or equivalent)

S&F in repair corner glass shelf (with bracket) etc complete all as specified (with bracket) etc complete all as secified and directed (CAT NO. CAN-1173 of Make-JAQUAR or equivalent or equivalent)

S&F in repair hand shower (Health Faucet) ABS Body with 8 mm dia, 1.20 mtr long flexible tube & wall hook etc complete all as specified and as specifed and directed (CAT NO. ALDCHR-593N of MAKE-JAQUAR or equivalent)

S&F in repair tubular towel rail 20mm dia type brass chrormium plated 600mm long between flanges complete all as specified and directed.

S&F in repair chromium plated shower roses 125 mm size with or without swivel joints of standard size including fixing to 15mm steel pipe or union complete all as specified and directed (CAT NO BS -76 of prayag or equivalent model of JAQUAR)

Taking down existing un-serviceable water proofing treatment from roof slab and cleaning the roof slab by wire brush and removing WPT felt beyond the MOD premises etc complete all as specified and directed

M&L for rendering 15 mm thick in CM (1:3) on fair faces of brick work or concrete surface mixed with water proofing compound as per manufacture instruction etc complete all as specified and as directed (Notes : WPC shall be measured and paid seperately)

M&L for APP modified roof treatment over exisiting roof slab etc to be executed through approved authorised applicator of the membrane manufacture with the following specifications complete all as specified and directed. (a) Applying oil bound bitumen primer @ 0.40 litre/sqm manufactured by the same manufacture as that of APP with a density 0.87-0.89 kg per litre at 25 degree centigrade on the prepared dry surface. (b) Laying 4mm thick APP modified water proofing polymeric membrane reinforced with non woven polyster fiber using butane torch appliaction with 10cm side lap and 15 cm end lap.

M&L preparing new wooden surface of any description, not other wise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer etc complete all as specified and directed.

M&L preparing of old painted surfaces of wood & wood based surface of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Ditto all as per item No. 121.00 here-in-before but not exceeding 10 cm width or girth.

M&L for Preparation of new steel and iron surfaces of any description, over 10 cm in width or girth, not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and directed

M&L preparation of old painted surfaces of steel surface of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed

Ditto all as per item No. 124.00 here-in-before but not exceeding 10 cm width or girth.

M&L for preparing new plastered surface of ceiling surface and applying two coats of white wash etc complete all as specified and directed

M&L for applying one coat of white washing (Lime wash white) on ceiling surfaces including preparation of old decorated plastered /unplastered surface of ceiling by brooming down, scrapping cleaning & removing down smoke soot, moulds, moss and efflorescence etc complete all as specified and directed.

M&L for applying one coat of white washing (Lime wash white) including prepration of old decorated plastered/ unplastered surface of walls by brooming down, scraping, cleaning and removing smoke soot, moulds, moss and efflorescence complete all as specified and directed.

Ditto all as per item No. 128.00 here-in-before but two coat of white wash etc complete all as secified and directed.

M&L for preparation of old decorated plsatered / unplastered surface of walls including cleaning & removing down smoke soot, moulds, mass and efflorescence and applying one coat of colour wash (Lime wash mixed with mineral colour ant tint) complete all as specified and directed.

M&L for preparing new or old plastered surface of walls with two coat Birla/Asian wall care Putty and applying two coat of oil bond distemper white or any tint over a coat of primer etc complete as specified and directed

M&L for applying one coat of oil emulsion distemper (oil bound distemper) of any tint including preparation of surfaces of walls on old decorated plastered / unplastered surfaces by washing / rubbing down and scrapping old loose material, smoke, soot, moulds, moss and efflorence etc including filling and stopping the rough surface / nail holes with white cement / POP / wall putty complete all as specified and directed.

Ditto all as per item No. 132.00 here-in-before but two coats of distemper oil emulsion.

M&L for preparation of plastered or unplastered old decorated surfaces of walls by brooming down or with steel wire brushing, scraping down smoke soots, moulds, moss & efflorescent salts & treating oily & greasy spots & filling holes & cracks with suitable material like white cement or plaster of paris and applying one coat of plastic emulsion paint, white or tinted complete all as specified and directed.

M&L for preparing newely plastered surface of wall and applying two coat of cement base paint over a coat of primer etc complete all as specified and as directed.

Blank

M&L for preparing old plastered surface of wall and applying one coat of cement base paint by brooming down, scraping, cleaning and removing smoke soot, moulds, moss and efflorescence complete all as specified and directed.

M&L for applying one coat of exterior emulsion weather coat paint including preparation of old decorated surface of wall by washing/rubbing down and stopping of /filling nail holes /rough surfaces with putty/plaster of paris complete all as specified and directed.

M&L for applying two coat of exterior emulsion weather coat paint including preparation of old or new decorated surface of wall by washing/rubbing down and stopping of /filling nail holes /rough surfaces with putty/plaster of paris complete all as specified and directed.

M & L for cleaning/removal of roof/ wall vegitations or any other unwanted things by using brushing or mannual neat and clean surface all as directed.

(Note : The Scope of Work contained in 'Sch of Credit' amounting to Rs. 45561.70 (refer Tender Srl Page No 37). The Quoted sum shall be arrived at after deducting the amount of “Sch of Credit” from the total amount of the ‘BoQ’

GAYATRI BUIDERS

J T ENTERPRISE

M/S SEN CONSTRUCTION

J.K.ROY & SONS