Supply and Installation of LT Meter Panels at Sanjay Gandhi Post Graduate Institute of Medical Science R B Road Lucknow and other associated works against Deposit Scheme 2024-25 in the area of Vrindavan under jurisdiction of EE EUDD Vrindavan lko.

Amount

Supply & Installation of 6 Way Meter Panel (as per approved GTP of MVVNL/UPPCL )as mentioned below Specification

6-WAY METER PANEL

INCOMER:

100 Amps, 415 volts, FP, 25 KA Moulded Case Circuit Breaker with thermal magnetic release

BUSBAR:

125 Amp TPN Aluminium busbars

OUTGOING:

6 Nos. 40 Amp TPN MCB's (10 KA) and space for 3 phase, dual register, pre paid type electronic meters.

Meter panels fabricated out of 14 / 16 SWG CRCA sheet steel, IP 42, wall / floor mounting type. The sheet steel shall undergo minimum 9 tank treatment followed by finishing powder coating of min 60 micron thickness as per following details complete with FP MCCB (25 KA) at incomer, TPN MCB (10 KA) at outgoings, TP Aluminium bus bar (100% neutral) etc. as required. The metering board shall have 3 phase indication lamps & have proper space to house 3 phase electronic meters and related hardware as required. Proper Earthing of Meter Pannel should be done.

Meter Boards shall have terminal blocks of required quantity, sealed screw and backlite sheet to mount meter boards and copper wires of required sizes upto meter compartment.

Size of the meter compartmenet shall be 400mm(H) x 350mm (W).

Supply & Installation of 8 Way Meter Panel(as per approved GTP of MVVNL/UPPCL )as mentioned below Specification

8-WAY METER PANEL

INCOMER:

100 Amps, 415 volts, FP, 25 KA Moulded Case Circuit Breaker with thermal magnetic release

BUSBAR:

125 Amp TPN Aluminium busbars

OUTGOING:

8 Nos. 40 Amp TPN MCB's (10 KA) and space for 3 phase, dual register, pre paid type electronic meters.

Meter panels fabricated out of 14 / 16 SWG CRCA sheet steel, IP 42, wall / floor mounting type. The sheet steel shall undergo minimum 9 tank treatment followed by finishing powder coating of min 60 micron thickness as per following details complete with FP MCCB (25 KA) at incomer, TPN MCB (10 KA) at outgoings, TP Aluminium bus bar (100% neutral) etc. as required. The metering board shall have 3 phase indication lamps & have proper space to house 3 phase electronic meters and related hardware as required.Proper Earthing of Meter Pannel should be done.

Meter Boards shall have terminal blocks of required quantity, sealed screw and backlite sheet to mount meter boards and copper wires of required sizes upto meter compartment.

Size of the meter compartmenet shall be 400mm(H) x 350mm (W).

Supply & Installation of 10 Way Meter Panel(as per approved GTP of MVVNL/UPPCL )as mentioned below Specification

10-WAY METER PANEL

INCOMER:

125 Amps, 415 volts, FP, 25 KA Moulded Case Circuit Breaker with thermal magnetic release

BUSBAR:

160 Amp TPN Aluminium busbars

OUTGOING:

10 Nos. 40 Amp TPN MCB's (10 KA) and space for 3 phase, dual register, pre paid type electronic meters.

Meter panels fabricated out of 14 / 16 SWG CRCA sheet steel, IP 42, wall / floor mounting type. The sheet steel shall undergo minimum 9 tank treatment followed by finishing powder coating of min 60 micron thickness as per following details complete with FP MCCB (25 KA) at incomer, TPN MCB (10 KA) at outgoings, TP Aluminium bus bar (100% neutral) etc. as required. The metering board shall have 3 phase indication lamps & have proper space to house 3 phase electronic meters and related hardware as required.Proper Earthing of Meter Pannel should be done.

Meter Boards shall have terminal blocks of required quantity, sealed screw and backlite sheet to mount meter boards and copper wires of required sizes upto meter compartment.

Size of the meter compartmenet shall be 400mm(H) x 350mm (W).

Supply & Installation of 12 Way Meter Panel(as per approved GTP of MVVNL/UPPCL )as mentioned below Specification

12-WAY METER PANEL

INCOMER:

125 Amps, 415 volts, FP, 25 KA Moulded Case Circuit Breaker with thermal magnetic release

BUSBAR:

160 Amp TPN Aluminium busbars

OUTGOING:

12 Nos. 40 Amp TPN MCB's (10 KA) and space for 3 phase, dual register, pre paid type electronic meters.

Meter panels fabricated out of 14 / 16 SWG CRCA sheet steel, IP 65, wall / floor mounting type, double door with canopy. The sheet steel shall undergo minimum 9 tank treatment followed by finishing powder coating of min 60 micron thickness as per following details complete with FP MCCB's (25 KA) at incomer, TPN MCB's (10 KA) at outgoings, TP Aluminium bus bar (100% neutral) etc. as required. The metering board shall have 3 phase indication lamps & have proper space to house 3 phase electronic meters and related hardware as required.(Outdoor Type).Proper Earthing of Meter Pannel should be done

Meter Boards shall have terminal blocks of required quantity, sealed screw and backlite sheet to mount meter boards and copper wires of required sizes upto meter compartment.

Size of the meter compartmenet shall be 400mm(H) x 350mm (W).

Supply & Installation of 24 Way Meter Panel(as per approved GTP of MVVNL/UPPCL )as mentioned below Specification

24-WAY METER PANEL

24-Way Meter Panel

INCOMER:

160 Amps, 415 volts, FP, 36 KA Moulded Case Circuit Breaker with thermal magnetic release

BUSBAR:

200 Amp TPN Aluminium busbars

OUTGOING:

24 Nos. 40 Amp TPN MCB's (10 KA) and space for 3 phase, dual register, pre paid type electronic meters.

Meter panels fabricated out of 14 / 16 SWG CRCA sheet steel, IP 65, wall / floor mounting type, double door with canopy. The sheet steel shall undergo minimum 9 tank treatment followed by finishing powder coating of min 60 micron thickness as per following details complete with FP MCCB's (25 KA) at incomer, TPN MCB's (10 KA) at outgoings, TP Aluminium bus bar (100% neutral) etc. as required. The metering board shall have 3 phase indication lamps & have proper space to house 3 phase electronic meters and related hardware as required.(Outdoor Type).Proper Earthing of Meter Pannel should be done

Meter Boards shall have terminal blocks of required quantity, sealed screw and backlite sheet to mount meter boards and copper wires of required sizes upto meter compartment.

Size of the meter compartmenet shall be 400mm(H) x 350mm (W).

Supply & Installation of 2 Way Meter Panel(as per approved GTP of MVVNL/UPPCL )as mentioned below Specification

2-WAY METER PANEL

2-Way Meter Panel

INCOMER:

100 Amps, 415 volts, FP, 25 KA Moulded Case Circuit Breaker with thermal magnetic release

BUSBAR:

125 Amp TPN Aluminium busbars

OUTGOING:

2 Nos. 63 Amp TPN MCB's (10 KA) and space for 3 phase, dual register, pre paid type electronic meters.

Meter panels fabricated out of 14 / 16 SWG CRCA sheet steel, IP 42, wall / floor mounting type. The sheet steel shall undergo minimum 9 tank treatment followed by finishing powder coating of min 60 micron thickness as per following details complete with FP MCCB (25 KA) at incomer, TPN MCB (10 KA) at outgoings, TP Aluminium bus bar (100% neutral) etc. as required. The metering board shall have 3 phase indication lamps & have proper space to house 3 phase electronic meters and related hardware as required. Proper Earthing of Meter Pannel should be done.

Meter Boards shall have terminal blocks of required quantity, sealed screw and backlite sheet to mount meter boards and copper wires of required sizes upto meter compartment.

Size of the meter compartmenet shall be 400mm(H) x 350mm (W).

Supply & Installation of 2 Way Meter Panel(as per approved GTP of MVVNL/UPPCL )as mentioned below Specification

2-WAY METER PANEL

INCOMER:

100 Amps, 415 volts, FP, 25 KA Moulded Case Circuit Breaker with thermal magnetic release

BUSBAR:

125 Amp TPN Aluminium busbars

OUTGOING:

2 Nos. 63 Amp TPN MCB's (10 KA) and space for 3 phase, dual register, pre paid type electronic meters.

Meter panels fabricated out of 14 / 16 SWG CRCA sheet steel, IP 65, wall / floor mounting type, double door with canopy. The sheet steel shall undergo minimum 9 tank treatment followed by finishing powder coating of min 60 micron thickness as per following details complete with FP MCCB's (25 KA) at incomer, TPN MCB's (10 KA) at outgoings, TP Aluminium bus bar (100% neutral) etc. as required. The metering board shall have 3 phase indication lamps & have proper space to house 3 phase electronic meters and related hardware as required.(Outdoor Type).Proper Earthing of Meter Pannel should be done

Meter Boards shall have terminal blocks of required quantity, sealed screw and backlite sheet to mount meter boards and copper wires of required sizes upto meter compartment.

Size of the meter compartmenet shall be 400mm(H) x 350mm (W).

Supply & Installation of 4 Way Meter Panel(as per approved GTP of MVVNL/UPPCL )as mentioned below Specification

4-WAY METER PANEL

Supply of 4-Way Meter Panel

INCOMER:

100 Amps, 415 volts, FP, 25 KA Moulded Case Circuit Breaker with thermal magnetic release

BUSBAR:

125 Amp TPN Aluminium busbars

OUTGOING:

4 Nos. 63 Amp TPN MCB's (10 KA) and space for 3 phase, dual register, pre paid type electronic meters.

Meter panels fabricated out of 14 / 16 SWG CRCA sheet steel, IP 65, wall / floor mounting type, double door with canopy. The sheet steel shall undergo minimum 9 tank treatment followed by finishing powder coating of min 60 micron thickness as per following details complete with FP MCCB's (25 KA) at incomer, TPN MCB's (10 KA) at outgoings, TP Aluminium bus bar (100% neutral) etc. as required. The metering board shall have 3 phase indication lamps & have proper space to house 3 phase electronic meters and related hardware as required.(Outdoor Type).Proper Earthing of Meter Pannel should be done

Meter Boards shall have terminal blocks of required quantity, sealed screw and backlite sheet to mount meter boards and copper wires of required sizes upto meter compartment.

Size of the meter compartmenet shall be 400mm(H) x 350mm (W).

Supply & Installation of 6 Way Meter Panel(as per approved GTP of MVVNL/UPPCL )as mentioned below Specification

6-WAY METER PANEL

INCOMER:

160 Amps, 415 volts, FP, 25 KA Moulded Case Circuit Breaker with thermal magnetic release

BUSBAR:

200 Amp TPN Aluminium busbars

OUTGOING:

6 Nos. 63 Amp TPN MCB's (10 KA) and space for 3 phase, dual register, pre paid type electronic meters.

Meter panels fabricated out of 14 / 16 SWG CRCA sheet steel, IP 65, wall / floor mounting type, double door with canopy. The sheet steel shall undergo minimum 9 tank treatment followed by finishing powder coating of min 60 micron thickness as per following details complete with FP MCCB's (25 KA) at incomer, TPN MCB's (10 KA) at outgoings, TP Aluminium bus bar (100% neutral) etc. as required. The metering board shall have 3 phase indication lamps & have proper space to house 3 phase electronic meters and related hardware as required.(Outdoor Type).Proper Earthing of Meter Pannel should be done

Meter Boards shall have terminal blocks of required quantity, sealed screw and backlite sheet to mount meter boards and copper wires of required sizes upto meter compartment.

Size of the meter compartmenet shall be 400mm(H) x 350mm (W).

Installation of 1 Way Meter Panelas mentioned below Specification

1-WAY METER PANEL

G.S.T. Extra as per rules.

M/S AARADHYA AND ADHYATM ASSOCIATES

ALOK ENTERPRISES