WBPHED/69_02/EE/BOLMD/24-25

Amount

Carrying charges of 1000 Meter 10 Sq.mm Al Armoured Cable from Patelnagar Store to Baliharpur W/S/Scheme including loading unloading complete.

Laying of cables 10 sqmm in an underground trench in single tier formation (horizontal), the trench size : 680 mm x 760 mm average depth, with brick protection on the top of each cable 8 (eight) Nos. bricks per Mtr. and 4 (four) Nos. bricks per Mtr. as separator between the bricks and cables and also trench to be filled up with shifted soil, levelling up and restoring surface duly rammed

Supply & delivery of 1.1KV grade 10 sq.mm 3 core XLPE insulated Aluminium armoured cable conforming to IS 7098 (Part-I) 1988, with upto date amendments.

Supplying, fitting and fixing G.I. pipes of TATA make with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately)

Laying of Submersible cable through GI pipe, Laying only Cable upto 50 sqmm through existing RCC/Hume/ GI Pipe/open masonary trench for single, 2, 3, 3 1/2 & 4 core as per Direction & upto satisfaction of EIC

Suitable Kiosk box for cable connection of submersible pump motor set with degree of protection IP 65 including suitable legs and 6 Nos. Al. Bus bar for 32 Amps and all necessary earthing arrangement and insulator as per direction of EIC.

C.I. sluice valve with flanged ends drilled to as per I.S. 1358/62 and having all cast iron components as per I.S. 780/71 solid forged bronze inside screw spindle having ultimate tensile strength not less than 4.72 MT per sq. cm. Spindle nut valve and seat faces of hard wear resisting, manufactured from best quality gunmetal conforming to I.S. 780/71, painted black all over with asphalt base paint tested to 21 kg (hydraulic pressure) per sq. cm., valve opening to anticlockwise direction, fitted and fixed complete

Withdrawing of 5 HP Submersible Pumping Mchinery along with all Column pipe by own arrangement including disconnection of Power line & delivery line

Supply and delivery of Submersible pumping machinery directly coupled with wet winding type Submersible Motor having follwing specification: Impeller GM/SS Shaft GM/SS Outlet- 65mm/80mm/50mm dia Motor Three phase 410 Volt +/- 10.0% wet winding type Submersible Motor, RPM: 2880/2900 Mode of starting- DOL Make- KSB/pluge/Texmo/BG/ any other approved make) N.B.- Manufacturer test certificate along with curve chart should be submitted at the time of delivery Head-45 Mtr: Discharge-16 m3/hr (Rating-5HP DOL)

Lowering the 5 HP Submersible pumping machinery along with replace all MS column pipe by own arrangement making power line & delivery line connection complete

Welding & Fitting fixing of GI pipe , Short Piece & reducing socket & Bend & others fittings

Add: GST @ 18% on sum of Item No: 1 to 11

Add: Cess @1% on sum of Item No. 12

HINDOL ROY (BID ID -6177317)

ORIENTAL ENGINEERING CO. (BID ID -6184976)