Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹12.0 LAccepted-AOC NAU PUKHRI ROAD MILLAN PALLY BYE LANE 2 NEAR GOYAL PALACE PO DISTT TINSUKIA ASSAM 786125 | TINSUKIA | ASSAM | 786125 | L1 | Accepted-AOC DUE TO QUOTED RATE IS L1 | |
| 2 | L2₹14.0 L+₹1.9 L (15.9%)Rejected-Finance AT ROAD NEAR RENUKA CINEMA P O DIST TINSUKIA ASSAM PIN 786125 | TINSUKIA | TINSUKIA | ASSAM | 786125 | L2 | Rejected-Finance DUE TO QUOTED RATE IS HIGH | |
| 3 | L3₹14.8 L+₹2.7 L (22.5%)Rejected-Finance | L3 | Rejected-Finance DUE TO QUOTED RATE IS HIGH |
Tender Value
₹12 L
EMD Value
₹24,000
Closing Date
4 Feb 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE LEKHAPANI
TINSUKIA, ASSAM
PERIODICAL SERVICES AND MISC REPAIR IN ZONE I, III, IVA AND IVB OF VARIOUS UNITS AT MIL STN LEKHAPANI
2022_MES_572338_1
8710/E8
Open Tender
Miscellaneous Works
Item Rate
180 days
GE LEKHAPANI
Class E and category a (i)
8 documents required · 8 mandatory
₹500
GE LEKHAPANI
₹24,000
Yes
27 Feb 2023
31 Dec 2022
11 Feb 2023
31 Dec 2022
4 Feb 2023
16 Jan 2023
Amount
Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water & removal of debris off the premises etc. complete all as specified & directed.
Material and labour for rendering 10 mm thick plaster in cement mortar (1:6 ) on fair faces of brick work or concrete surfaces including finishing top even and smooth without using extra cement complete all as specified & directed.
Material and labour for rendering 15mm thick in cement mortar (1:4) in patches not exceeding 2 Sqm each up to 8 Mtr height of building, finished even and smooth without using extra cement with and including using liquid WPC @ 200ml per 50 kg of cement complete all as specified and as directed Note :-(WPC shall be measured and paid separately under relevent item)
Supply only Integral liquid water proofing compound conforming to IS-2645-2003 complete all as specified.
Material and labour for waterproof cement based putty @ 1 Kg (undiluted) per sq mtr of average thickness 1mm over the plastered / old painted wall after complete scrapping of existing treatment to prepare the surface even and smooth complete and sanding of the putty surface with mechanical wall sander (having mechanical vacuum mechanicsm) having RPM not less than 1500, sanding pad of 240 grit or above to make the surface free from dust etc by skilled labour as per following steps : - Step 1 : Mixing the putty powder by adding water as per manufacturer instructions using putty mixer machine with the mixing capacity of min 2.5 Kg putty per minute. Step 2 : Applying the first coat the prepared mixer with the help of fully automatic airless spray machine for putty application having flow speed of max 6 ltrs per minutes with a max pressure of 3300 PSI. Step 3 : Allowing 6-8 hrs time to dry the putty surface completely. Note : (a) The work pertaining to periodical services and water proofing shall be executed by authorised applicator through manufacturer of which the materials i.e. Paint, Distemper, Putty etc proposed to be used by the contractor shall be got approved by GE before execution. (b) Cost of Scafolding upto 10 mtr height of building is demmed to be included in the unit rate quoted . (c) Masking of window/doors during spray painting using polythine film is demmed to be included in the unit rate quoted. (d) Cleaning including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes and clearing site of paint, mats etc demmed to be included in the unit rate quoted.
Material and labour for applying two coats of oil bound distemper using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage as certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface scomplete all as specified and directed. Note : (a) Sanding of surface to be done by mechanical sander with 1500-2700 rpm, with internal dust extraction system for clean environment as certified by paint manufacturer. Proper mashking to carried before primer and paint application. (b) The work pertaining to periodical services and water proofing shall be executed by authorised applicator through manufacturer of which the materials i.e. Paint, Distemper, Putty etc proposed to be used by the contractor shall be got approved by GE before execution. (c) Masking of window/doors during spray painting using polythine film will be included in the unit rate quoted. (d) Cleaning including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes and clearing site of paint, mats etc demmed to be included in the unit rate quoted.
Complete removal of existing treatment on wall/ roof projections incl facia, cornices etc by scrapping with mechanical sander (having mechanical vaccum mechanism) with sanding pad of appropriate grit to make surface clean, free from dust loose paint etc by skilled labour complete all as specified and as directed
Material and labour for one coat of acrylic water based exterior grade primer @ 0.9 ltr (undiluted) / 10 sqmtrs diluted with water 1:1 ratio to be applied with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI , then allowing 6-8 hrs time to dry the surface for painting of subsequent coats complete all as specified and directed. Note : (a) The work pertaining to periodical services and water proofing shall be executed by authorised applicator through manufacturer of which the materials i.e. Paint, Distemper, Putty etc proposed to be used by the contractor shall be got approved by GE before execution. (b) Cost of Scafolding upto 10 mtr height of building is included in this item. c) Masking of window/doors during spray painting using polythine film is demmed to be included in the unit rate quoted. (d) Cleaning including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes and clearing site of paint, mats etc demmed to be included in the unit rate quoted.
Material and labour for two coats of water based premium acrylic smooth exterior emulsion of approved colour with silicon additive and color stay Techonology, Excellent Dirt Pick up resistance with low VOC less than 50 gram/litre as per the LEEDS specification , Anti Algal properties in two coats @ 1.79 ltr (Undiluted) / 10 Sqm with water as per manufacturer instructions applied over priming coat with fully automatic airless spray machine of paint application with a flow spreed of min 1 ltr per minute having a pressure of 3300 PSI and then allowing 6-8 hrs time to dry the surface in both coats of paint complete all as specified and directed. Note : (a) The work pertaining to periodical services and water proofing shall be executed by authorised applicator through manufacturer of which the materials i.e. Paint, Distemper, Putty etc proposed to be used by the contractor shall be got approved by GE before execution. (b) Cost of Scafolding upto 10 mtr height of building is included in this item. (c) Cleaning including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes and clearing site of paint, mats etc demmed to be included in the unit rate quoted. Note for smart painting (Item Nos 5 to 9): The tenderer will be submitted the documents of Memorandum of Understanding (MOU) with the manufacturer as approved by GE before execution of smart painting items.
Material and labour for preparation of old plastered or unplastered surfaces of walls by brooming down or steel wire brushing ; scrapping down smoke soot , moulds, moss and efflorescent salts and treating oil and greasy spots and applying two coat of white wash on old decorated surfaces of walls , chajja, facia & roof projection including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified .
Material and labour for preparation of old plastered or unplastered surfaces of ceiling by brooming down or steel wire brushing ; scrapping down smoke soot , moulds, moss and efflorescent salts and treating oil and greasy spots and applying two coat of white wash on old decorated surfaces of ceiling including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified .
Material and labour for preparation of old plastered or unplastered surfaces of walls by washing, rubbing down and stopping of distempered and painted surfaces and distempering walls by applying one coat of acrylic based distemper emulsion of any tint/shade complete all as specified.
Material and labour for preparation of old plastered or unplastered surfaces of walls by brooming down or steel wire brushing ; scrapping down smoke soot , moulds, moss and efflorescent salts and treating oil and greasy spots and applying one coat of white wash on old decorated surfaces of walls , chajja, facia & roof projection including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified .
Material and labour for preparation of old plastered or unplastered surfaces of ceiling by brooming down or steel wire brushing ; scrapping down smoke soot , moulds, moss and efflorescent salts and treating oil and greasy spots and applying one coat of white wash on old decorated surfaces of ceiling including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified .
Material and labour for preparation of old surfaces of walls , chajja , facia , roof projection ncluding filling the cracks / holes and applying one coats of cement base paint , white or tinted including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified .
Material and labour for preparation of old painted wooden /wood based materials surfaces of any description, not otherwise described, over 10 cm width or girth and painting with one coat with synthetic enamel paint (1st quality) including cleaning, stopping and rubbing down and removing all dropings etc. all as directed.
Material and labour for preparation of old painted steel and iron surfaces of any description , not otherwise described ,over 10 cm width or girth and painting with one coat with synthetic enamel paint (1st quality) including cleaning, stopping and rubbing down and removing all drops etc. complete all as speciified.
Material and labour for 2.5 to 3mm thick sun board with laminated vinyl sheet incl screen printing of bldg No / Qtr No as per sample kept in GE Office of size 250mm x 150mm each incl fixing upto 2nd floor height incl necessary PVC rawl plug and SS screws of 25mm long complete all as directed.
Dismantling boarding, any description fixed in any position with nails complete all as directed.
Material and labour for hot dip aluminium-zinc alloy metallic coated plain steel sheet as per IS 15965:2012 of durability class 3, atmospheric classification category 3, coating class AZ 150, 0.50mm thick of an approved colour and having yield strength of 550MPa as in ridge/valley/gutter/eaves boardings fixed with self tapping screws as specified including necessary scaffolding and safety measures at any floor complete all as specified and as directed.
Taking down chowkat or frame with shutters (without taking off shutters from the frame) not exceeding 1.5sqm each and making good to disturbed surfaces and removing from site of work complete all as specified and as directed by the Engineer-in-Charge.
Supply and fixing factory made steel ventilators fixed type complete with glazing bars dovtailed or welded complete all as specified and as directed.
Supply and fixing powder coated aluminioum sliding windows three track with two glass shutters including 5mm thick glass tinted Modiguard and one shutter with stainless steel wire guage wire cloth 0.31mm nominal dia of wire and width of aperture 1.61mm, using aluminium powder coated sect. Aluminium cleat, PVC track, beading, handle, lock, rubber beading etc complete. Note :- (i) Three track top & vertical - Jindal Main -2010 Section No 20621, (ii) Three track bottom - Jindal Main - 2010 section No 20620, (iii) Shutter verticval section - Jindal Main - 2010 Section 20606, (iv) Shutter top & bottom - Jindal Main - 2010 section No 20604, (v) Shutter vertical middle (interlock) Jindal Main - 2010 Section No 20605.
Material and labour for framed work such as griils, grating, angle iron door frames etc., with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars, barred iron doors, laders, framed balusters, walk ways, railings frame work of water tanks and similar work conforming to Fe-290. Gde E-165 complete all as specified & as directed.
Supply and fixing Aluminium powder coated door shutter single / double leaf, side hung type over and including on floor door spring of appropriate size and capacity , 44.45mm wide (two panels) fabricated having hanging and meeting style 58.00 mm X 44.45 mm X 1.8mm thick, top rail 83.50 mm X44.45 x 1.62 mm thick, middle rail 83mmx44.45mmx1.70mm thick and bottom rail 95.25 mm X 44.45mm X 1.70 mm thick and including jointing cleats, aluminium anodised snap beading, screws, aluminium anodised fitting such as pair of 'D' type handle 250mm long (decorative type), tower bolts 150 mm long 1 Nos for each leaf, aluminium beading, PVC packing,5mm thick sheet glass, locking arrangement with mort ice lock 6 lever, 1Nos floor door stopper and necessary fitting & fixtures complete all as specified and directed.
M&L for preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and evenly applying two coats of synthetic enamel paint ( 1st quality) over a coat of red oxide primer including cleaning, stopping and rubbing down and removing all drops etc. complete all as speciified and as directed.
Hacking out old broken glass (any thickness, size, quality or description), from wooden frames, glazed with putty or fixed with beads complete all as specified and as directed.
Supply and fixing 2.5mm to 3mm thick PVC transparent/frosted window panes ordinary quality and glazing with oil putty / wooden beads as required in squares n exc 0.5sq. m in each pane complete all as specified and as directed
Dismantling wall and celling board (fibre, pulp, insulation etc) or insulation boards/slabs/blankets any thickness including cover fillets complete all as specified & directed
Supply and fixing inter locking metal grid (snap grid for false ceiling) of size 605mm x 605mm in true horizonatal level, hot dipped galvanised steel sections consisting of main “T” runner with suitably spaced joints to get required length and size 24mm x 38mm made from 0.30mm thick (Min) sheet spaced at 1200mm centre to centre and cross “T” of size 24mm x 28mm made of 0.30mm thick (Min) sheet, 1200mm long spaced between main “T” at 600mm centre to centre to form a grid of 1200mm x 600mm and secondary cross “T” of length 600mm and size 24mm x 28mm made of 0.30mm thick (Min) sheet to be interlocked at middle of the 1200mm x 600mm panel to form grids of 600mm x 600mm and wall angle of size 24mm x 24mm x 0.4mm. Main “T” runner to be suspended from ceiling using 4mm GI rods, 1200mm x 600mm centre to centre all complete for all heights as per specifications and as directed by Engineer – in - Charge.
Material and labour for 4 mm thick high pressure, oceanic pre-primed, self embossed, non asbestos fibre cement decorative board, water, termite and fire resistant for insulation ad acoustic purpose to be placed in grid system duly suspended with 2 to 3mm dia GI wire hangers fixed with steel dash through fasteners from purlins with butterfly clips, hold down clips with provision of high fixtures, air conditioning, diffuser and ducts, sprinkler, smoke detector etc, complete all as per manufacturer instructions
Supply and fixing MS chromium plated curtain rod 25 mm dia , with and including MS chromium plated decorative round finials on either end provide a visually balanced appearance including MS chromium plated brackets fixed to wall with 30 mm wooden steel screws and PVC rawl plug, anchors, and installation as in repair complete.
STANDARD ELECTRIC WINDERS
FREEZCON
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .