Maintenance and repair i.e. Cement plaster. OBD, Painting,tiles in House No. 12/Type-III Duplex in MDU, Rohtak

Amount

Cement plaster 1 :3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. 20 mm cement plaster

Dismantling old plaster or skirting raking out joints and cleaning sqm 37 37 the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

15 mm cement plaster on the rough side of single or half brick wall of mix : 1 :4 (1 cement: 4 fine sand)

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, including ISi marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately} 30 mm thick shutters

Float glass panes 4 mm thick glass pane (weight not less than sqm 10kg/sqm).

Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary 35 mm thick shutters Kiln seasoned and chemically treated Hollock wood

30 mm thick shutters Kiln seasoned and chemically treated Hollock wood

Providing and fixing ISi marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 25 mm thick (for cupboard) including ISi marked nickel plated bright finished M.S. piano hinges with necessary screws

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1 :3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20 mm nominal outer dia Pipes

Providing and fixing white vitreous chinaware pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required W.C. pan with ISi marked white solid plastic seat and lid

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm nominal bore

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 15 mm nominal bore

Dismantling cement conglomerate / terrazzo floors 25 mm to 50 mm manually/ by mechanical means and disposal of material within standard lead as per direction of Engineer- in-charge.

Cement Concrete 1 :8:16 Flooring Cement Concrete 1:8:16 with Over burnt (Jhama) Brick cum Aggregate: 90 mm to 40 mm size in foundation and plinth.

Providing and laying of conglomerate floor 50mm thick cement concrete topping 1 :2:4

Providing and laying of conglomerate floor 40mm thick cement concrete topping 1 :2:4

Providing and fi xing glass strips,4 mm thick in terrazzo/ cement concrete floors. 32mmwide

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Providing and applying two coats white cement based putty of approved brand and manufacturer, over plastered surface and grinding the surface smooth with sand paper to get en even and smooth finish including cost and carriage of all material , labour charges, scaffolding, sundries etc. complete

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade: New work (two or more coats) over and including water thinnable priming coat with cement primer

Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works.

Painting two coats excluding priming coat with synthetic enamel paint in all shades on new wood work or metallic or plastered or concrete surfaces to give an even shade.

Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 litre/1 O sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

Repairing of RCC facia/Chhajjas, beam, column and other RCC structure in the building. (i) Hacking out loose/ pourse concrete at least 150mm beyond the damaged area. (ii) Cleaning of reinforcement and concrete with wire brush and water jet. (iii) Fixing of M.S weld mess (3''x3'' 10 gauge) on the affected area. Steel bar 8 mm dia 6'' C/C both bays may also be placed if required as per site requirement and will be paid Separately. (iv) Two coat of gunitting (1st coat 15mm to 20 mm thick and 2nd coat 10mm to 15mm thick with cement course sand in proportion 1:3 and blended 6mm to 7mm down aggregate. The chemical on old surface and the scaffolding, if required .

Pressed steel sheet frames (chowkats), consisting of 2mm thick steel sheet of the specified section, including iron lugs (hold fasts), iron hings, confirming to PWD specifications, including bolts for fixing stops, locknutch, provision for receiving tower bolts and finished with one coat of ready mixed paint red lead non setting primer of approved quality, fixed in position including the cost of cement concrete 1:3:6 for filling in the frame, and cement concrete 1:3:6 for lugs complete. Door and window frame of size 89mmX 50mm with 50mm wide double rebate

Providing and fixing anti skid tile 400 x 400 mm or above size of approved make in flooring, laid in any pattern as specified over base of 20mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade of tiles. As per old HSR Items (14.91+14.97-14.93) Note : - Tile shall be of premium quality (first quality) of reputed manufacturer like NITCO, KAJARIA, SOMANI, JOHNSONS

Providing and fixing C.I manhole cover with frame (2'x2') fixing in cement mortor 1:4 complete in all respect to the satisfaction of Engineer-in-charge.