Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹74.2 LAccepted-AOC | 1 | Accepted-AOC Lowest bid quoted | |
| 2 | 2₹74.2 L+₹1,000 (0.01%)Rejected-AOC LACHIT NAGAR P S NORTH LAKHIMPUR P O KHELMATI DIST LAKHIMPUR ASSAM | NORTH LAKHIMPUR | LAKHIMPUR | ASSAM | 2 | Rejected-AOC quoted rate is higher than L1 bidder | |
| 3 | Not Admitted-Fee/PreQual/Technical ASSAM AS | KOKRAJHAR | ASSAM | 783331 | - | Not Admitted-Fee/PreQual/Technical Not Complied with technical specification |
| Sl No | Description | Qty | Unit | PAWAN RATHI L1 | Purna kanta Hazarika L2 |
|---|---|---|---|---|---|
| 1.00 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. | 165.09 | qntl | 8,895 ₹14,68,475.55 Lowest | 8,895 ₹14,68,475.55 Lowest |
| 2.00 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. | 15.52 | qntl | 8,895 ₹1,38,050.4 Lowest | 8,895 ₹1,38,050.4 Lowest |
| 3.00 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :
5.1.2 1: 1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size de rived from natural sources) (ii) In super structer 5.2.2 | 121.9 | cum | 10,185 ₹12,41,551.5 Lowest | 10,185 ₹12,41,551.5 Lowest |
| 4.00 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in : complete | 648.72 | sqm | 837.85 ₹5,43,530.05 Lowest | 837.85 ₹5,43,530.05 Lowest |
| 5.00 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) For fixed portion
21.1.1.1 Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) | 873.18 | kg | 433.95 ₹3,78,916.46 Lowest | 433.95 ₹3,78,916.46 Lowest |
| 6.00 | For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)
21.1.2.1 Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) | 32.17 | kg | 531.8 ₹17,106.41 Lowest | 531.8 ₹17,106.41 Lowest |
| 7.00 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):
21.3.3 With float glass panes of 8 mm thickness (weight not less than 20 kg/sqm | 87.73 | sqm | 1,496.15 ₹1,31,254.25 Lowest | 1,496.15 ₹1,31,254.25 Lowest |
| 8.00 | 15 mm cement plaster on the rough side of single or half brick wall of mix : | 1,297.43 | sqm | 339.7 ₹4,40,736.97 Lowest | 339.7 ₹4,40,736.97 Lowest |
| 9.00 | Centering and shuttering including strutting, propping etc. and removal of form work for :4.3.1 Foundations, footings, bases for columns Columns, piers, abutments, pillars, posts and struts | 989.21 | sqm | 804.25 ₹7,95,572.14 Lowest | 804.25 ₹7,95,572.14 Lowest |
| 10.00 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :
13.43.1 Water thinnable cement primer | 1,297.43 | sqm | 64.45 ₹83,619.36 Lowest | 64.45 ₹83,619.36 Lowest |
Tender Value
₹73.4 L
EMD Value
₹1.5 L
Closing Date
15 Sept 2025, 2:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Officer
Executive Officer, North Lakhimpur Municipal Board
Construction of RCC 2nd Floor at North Lakhimpur Municipal Board Office, Assam Under 15th FC Untied Basic Grants (1st inst.) for The Year 2022-23 During the Year 2023-24
2025_UDD_47055_1
NLMB/MTECH/2025-26/50
Open Tender
Civil Works - Building
Works
180 days
North Lakhimpur
Please refer Tender documents.
4 documents required · 4 mandatory
₹2,230
₹1.5 L
Yes
16 Oct 2025
28 Aug 2025
16 Sept 2025
29 Aug 2025
15 Sept 2025
29 Aug 2025
29 Aug 2025 - 15 Sept 2025
Amount
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete.
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete.
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 5.1.2 1: 1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size de rived from natural sources) (ii) In super structer 5.2.2
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in : complete
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) For fixed portion 21.1.1.1 Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)
For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) 21.1.2.1 Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): 21.3.3 With float glass panes of 8 mm thickness (weight not less than 20 kg/sqm
15 mm cement plaster on the rough side of single or half brick wall of mix :
Centering and shuttering including strutting, propping etc. and removal of form work for :4.3.1 Foundations, footings, bases for columns Columns, piers, abutments, pillars, posts and struts
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : 13.43.1 Water thinnable cement primer
Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete
Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately :
:Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : 13.48.1 Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm
Sanitary and Internal water Supply
Internal Electrification
Purna kanta Hazarika (BID ID -281934)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .