GE/C-118/2024-25 PROVN OF CERTAIN SANCTION WORK IN THE AREA OF AGE B/R-II AND AGE E/M (CENTRAL) UNDER GE (CENTRAL) DELHI CANTT-10

Amount

S & F pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

S&F Roof trusses (framed), truss, framed brackets of angles, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel flat or hollow sections) including distance pieces, cleats etc. Fe 410-W(Gde E-250) quality-A complete all as specified and directed by Engineer-in-Charge.

M & L for painting new or previously untreated steel and iron surfaces of any description, over 10cm in width or girth,not otherwise described with two coats of synthetic enamel paint over a coat of red oxide complete all as directed.

M&L for Surface excavation n exc 15 cm deep and site clearance complete all as specified and directed.

M & L for 100 mm thick cement concrete type D-2, 1:4:8 (40 mm graded stone aggregate) as in sub base all as specified.

M&L for Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry laid over 15mm thick screed bed in cm 1:6 as in floors with no pigment complete all as specified and directed.

Taking up or down 15 mm dia GI tubing and connections complete all as specified.

S&F 15mm dia GI tubing medium grade with all fittings and fixed to wall and ceiling or laid in floors etc complete all as specified and directed.

S&F bib tap with crutch or butterfly handle, screwed down, screwed for iron pipe, 15mm dia, fancy type, cast copper alloy, chromium plated long body with flange complete all as specified.

S&F CP brass shower rose 250mm size suitable for 15mm bore pipe with C P arms complete all as specified.

Supply and fix PVC connection pipe of 15mm size with PTMT check nuts with washers of length 450mm, complete all as specified.

S & F 15 mm dia Brass CP WHB Mixer for mixing hot & Cold water screwed down for iron pipe and fixed complete all as specified.

S&F Powder Coated Anodised aluminium frame for doors, windows, ventilators with one or more rebates including aluminium alloy Powder coated standard 10mm section window grill as per approved sample and as per IS specifications joining cleat for fixing etc. complete all as specified.

M&L anodised aluminium window/door and ventilator shutters, sliding or side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.),hinges type B-21 100mm long (2no.) suitable handle ,(01 no.) including 4mm thick glass panes or stainless steel wire mesh complete all as specified and directed. Note : The rate quoted by the contractor is inclusive of all fixture/fittings/glass/wire mesh etc.

M& L for non skid coloured rectified ceramic tiles (300x300x)7 to 8mm thick in floors, etc, set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15mm thick screed bed for laying floor in CM 1:6 including dismantling the existing tiles with screed and removal of debries out of MOD Land complete all as specified and directed by Engineer in Charge.

M&L for coloured ceramic tiles (300x600mm)x7mm thick on vertical surfaces on skirting /dados and risers to steps etc including rendering 10mm thick cement mortar in CM 1:4 ,including dismantling the existing tiles with screed and removal of debries out of MOD Land complete all as specified and directed by Engr-in-Charge.

S&F in repair vitreous China coloured European type WC with (single piece) wall / floor mounted including Vitreous china coloured 10 ltrs capacity cistern connection to drain,'P' trap or S trap and fixing bolts ,plastic water closet seat cover complete all as specified.

S & F Brass CP health faucet hand shower type with 8mm dia 1.2 Meter long Flexible Tube and Wall Hook screwed for iron pipe fancy type long body all as specified and directed.

Supply & fix in repair CP connection pipe of 15mm x 600mm long with 2 Nos brass check nuts with washers, complete all as specified.

S&F in repairs vitreous chinaware coloured wash hand basin with full pedestal of size 550mm x 400mm complete including , CP Waste coupling ,waste pipe ,complete fixing arrangement and cutting for and pinning in walls & making good complete all as specifed and directed by Eng in charge.

S&F in repair fancy type brass chromium plated toilet paper holder, complete all as specified.

S&F in repair fancy type brass chromium plated soap dish, complete all as specified.

S&F in repair CP grating 125mm dia, complete all as specified.

S&F in repair aluminium peg set of 6 peg, 45 centimeter long, complete all as specified.

S&F in repair chromium plated quarter turn brass 2 way bib cock (two in one) suitable for 15mm bore pipe complete all as specified and directed.

S&F in repair 15mm dia chromium plated quarter turn wall mixer hot & cold L bend 3 in 1 pattern fixing and connection to pipes, complete all as specified and directed.

S&F in repair fancy type chromium plated quarter turn brass angle valve type suitable for 15mm bore pipe complete all as specified.

S & F in repair fancy type sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with CP bracket gaurd and railling 60 cm long complete all as specified.

S&F in repair fancy type glass corner 300mm radius of 10mm thick toughned glass with CP railing fixed with screws fancy type complete all as specified.

M&L for 75 mm thick cement concrete 1:3:6 type C2 (using 20mm graded stone aggregate). Plinth protection laid to a slope of 1 in 24 in alternate basis system. Each bay shall not exceed 3m in length, 12mm wide & 75mm deep joint shall be formed between the bays which shall be filled with Mastic filling to full depth comprising a mixture of 1 part of heator hot blow bitumen 85/25 portion and two parts of heated badrapur sand (by volume) complete all as specified and directed.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar, all as specified.

M & L for 18-20 mm thick Granite stone work (table rubbed and polished) over and including15mm thick Screed bed or bedding layer in CM 1:4, as in steps, jambs, pillars, window cills, cooking platforms and like including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite,front and side of slab moulded and polished including dismantling the existing stone slab with screed/ backing and removal of debries out side the MOD Land complete all as specified and as directed by the Engineer-in-Charge.Note- The cost of making hole for Gas pipe in cooking plateform is included in unit cost of item and nothing extra shall be paid on this account.

S&F Stainless steel drapery curtain rods gold or antique silver 25 mm nominal dia of approved quality with two number decorative brackets design as approved fixed in brick/concrete wall with same finished knobs/latto on each end of curtain rod incl taking down old pelmet complete all as required and directed.

M&L for demolition of cement concrete in ground floor and pavings n exc 15cm thickness (below or above ground level) complete all as directed.

Providing & Fixing type B0 1:2:4(12.5mm graded aggregate) set in cement mortar 1:4 precast cement concrete louvres and jallies, 25mm thick (measured solid), inclding all mouldings but excluding frames complete all as specfied and directed.

M&L for providing type B1 1:2:4(20mm graded aggregate) set in cement mortar 1:4 precast cement concrete in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars,bed plates, pintle blocks, ancho-rage blocks, bonders (for stone wallin). corbels, brackets,etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throat- ing etc. and setting in mortar complete with joints to match including necessary formwork complete all as specified and directed

M&L for preparation of new surface and applying two coats of cement based paint over a coat of alkali resistant primer complete all as specified and directed.

Excavation in trenches (soft/loose soil) n exc. 1.5m wide and n exc 1.5 m in depth for foundation etc. and getting out all as specified.

M & L Cement concrete type D-2, 1:4:8 (40 mm graded stone aggregate) in foundations, filling and mass concrete as in sub base all as specified.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm.

Demolition of cement concrete in ground floor and pavings n exc 15cm thickness (below or above ground level) complete all as directed.

M & L for removing excavated material exc. 250m but not exceeding 500m and depositing where directed all as specified.

M & L for brick work with old size subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM 1:6

M&L for Surface dressing n exc 15 cm deep and site clearance complete all as specified and directed.

Taking down chowkats or frames exc. 1.5 Sqm and n.exc 4 Sqm each with shutters (without taking off shutters from frames ), complete all as specified.

Taking up or down 20 mm dia GI tubing and connections including cleaning for re-fixing, complete all as specified.

S&F 20mm dia GI tubing medium grade with all fittings and fixed to wall and ceiling or laid in floors etc complete, all as specified.

M&L for coloured glazed ceramic tiles 300x600 x 7 to 8mm thick as in vertical surfaces of wall as dado/skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:4 complete all as specified and directed.

S&F brass chromium plated tubuler towel rail 20mm dia D type 60cm long between flanges including a pair of CP brass brackets, complete all as specified.

S & F waste fitting 32mm dia brass chromium plated for WHB with long screwed and shanks and fly nuts, flanged end bedded in red lead cement and other end fixed, complete all as specified.

S&F DWCPE(SN4) 150mm dia (Internal Dia) pipes,snap fit coupler and rubber ring incl testing and laid and properly jointed laid in trenches to a level on concrete bed complete all as specified.

M & L for preparation of new plastered surface of wall and jallies and applying two coat of cement based paint over one coat of primer from the same manufacturer including scaffolding if required complete all as specified and directed.

M&L for anodised aluminium door shutters, aluminium section weighing .55kg/Rmincluding necessary joining cleats,glazing clips, rubber neoprene packing,handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc complete all as specified and directed.

S&F 5.5 mm thick sheet glass ordinary quality in square n.exc 0.5 Sqm each glazing with beading fit to doors, complete all as specified.

S & F vitreous China urinals, flatback of size 465X355X265 mm white with grating and union for discharge pipe of pvc 60 cm long waste pipe including providing and fixing plugs, bedding urinal against wall in CM 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (providing and inclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed.

M/L cement concrete Type B2 1:2:4 ( 40mm graded aggregate) in foundation filling and mass concrete complete all as directed.

S & F for precast plastic fibre reinforced cement concrete Manhole cover including grove and hook arrangement for lifting and placing in position and sides covered by MS sheet medium duty of overall Size 1000mmx500mm & 75 mm thick complete all as specified and as directed.

M&L 100mm thick Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface with broken stone.

M&L cement concrete 1:2:4 type B 2 (20mm graded stone aggregate) as in finished floor of 75mm thick, complete all as specified.

M&L for cement concrete 1:2:4 type B1(using 20mm graded stone aggregate) as in blocks for hold fast, coping, benching etc. including weathering, slightly rounded or chamfered angles or throating including form work to concrete surfaces, complete all as specified.

M & L for 15 mm thick internal rendering in cement mortar 1:6 on other fair face of brick walls/ concrete surfaces & finished even and smooth without using extra cement,applying 2-3 mm thick wall care puty and two coats of distemper on newly plastered wall surface.

M & L for 15 mm thick internal rendering in cement mortar 1:4 on fair face of brick walls/ concrete surfaces & finished even and smooth without using extra cement,applying 2-3 mm thick wall care puty and two coat of a Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces

M&L Kota stone slab 20-25 mm thick with uniform texture in floor (size 580mm x 580mm) if stair case dont mention size in one length with laid over and including 15 mm thick screed in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L kota stone with uniform texture of 20-25 mm thick in , skirting, dado and pillars in one single piece (size decided by Engineer-in-Charge) laid over and including cement screed 15mm thick in cement morter 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing , bevelled edge of corner etc complete all as specified and directed.

M&L mild steel work as in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS-1161-1979 grade St-240 including necessary welding etc complete all as specified and directed.

M&L second class hard wood plain, solid, straight, chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints including treating the back of chowkhat with two coat of black japan/bituminiuos paint complete all as specified and directed.

S&F 35 mm thick flush shutters of 2 sqm areasolid core construction with block board core and ply wood face panels commercial type on both sides, fixed including 03 Nos. MS butt hinges 100mm long, 02 Nos 150mm long Mild steel pressed handle over type, stove enamelld black, 01 Nos 300mm long mild steel sliding door bolts, plate type stove enamelled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts four on bolt clip and two on staple plate, 02 Nos Mild steel barrel tower bolts 200mm long stove enamelled black, with birght bolt, two coats of synthetic enamel paint over a coat of pink primer for each shutter complete all as specified.

M&L Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc

M&L for mild steel TMT bars 10mm dia and over cut to length,bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified.

All as ser item no 70 above but 6mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and as directed.

M&L reinforced cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) (nominal mix) as in Lintels, beams, over 1.50 mtr and the like including bonding agent , complete all as specified.

M & L Damp proof course to horizontal or vertical surfaces 25 MM in cement concrete 1: 2: 4 type B-0 including necessary formwork complete all as specified and as directed.

M & L Applying evenly a coat of blown type bitumen at the rate of 1.50 kg per square metre and blinding with clean dry sand @ 0.05 cu. m. per sqm complete all as specified and as directed.

Polythene film, 50 micron thick, laid on a coat of bitumen primer, @ 0.30 to 0.50 kg per sq.m complete all as specified and as directed.

M & L Impregnating cream for injection into masonry or concrete wall 230 mm thick against capilary rising humidity complete all as specified and directed. (make: RIsing bar super strong of chowgale or equivalent ) Method of Applicaion Methodology (a) The surface must be sound, absorbent, clean, free of dust, oil, paint, curing agents, loose cement or lime plaster & concrete, debris, or any separation layers. (b) The plaster must be knocked off at least 50 cm beyond the visibly penetrated area. (c) Damaged mortar joints are to be scraped out to a depth of approximately 2-3 cm. All sharp edges/joints need to be levelled ; loose concrete to be removed. (d) Drill boreholes at ground level horizontally. The boreholes are drilled horizontal into the masonry.

M & L Formwork to sides of pillars,posts, struts, piers, columns, beam and stanchions complete all as specified & directed.

M&L for cement concrete Nominal mix Type B1 1:2:4 (using 20mm graded stone aggregates) column Pillar post beam RCC Wall etc complete all as specified & directed.

S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete confirming to Gde Fe 410-O or Fe 310-O.

Excavating in post holes (or similar holes) each not exceeding 0.50 cu m, getting out, returning,filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in soft/loose soil complete all as specified.

M&L mild steel plates (plain or chequered) channels, square cut or notched (ordinary or counter sunk) forming holes, with riveted, bolted or welded attachement complete all as specified.

S&F Mild steel screw bolts (machine made) any dia size with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5 cm long complete all as specified and directed.

M&L Cement concrete work as in floor/pavement/hard-standing of flexural strength 40 kg/per square centimetre in field using 400 kg of cement per cubic metre thickness of concrete 10 cm, finished concrete surface even and smooth without using extra cement in proper levelling , slope complete all as specified and directed.

Forming Construction joint 30mm deep x 10mm wide filled sealing compound Grade 'A' complete all as specified and directed.

M&L for 18-19mm thick PVC moulded solid board both side prelaminated for cupboard etc with shutters and shelf full size fitted under or including provision for fixing arrangements, fittings/fixtures like magnetic catcher, hinges etc complete all as specified and directed. (Note:- The rate quoted by the contractor is inclusive of all the fittings and fixtures for the entire completion of work. Nothing extra shall be paid on this account).

M&L Frame work as in door chowkhats with angle iron welded together ends of angle shouldered and fixed to opening and welding 3 Nos mild steel butt hingese, and 6 nos hold fasts made out of FI 25x3 mm 30 cm long for fixing of chowkhats( Butt hinges paid separately) complete all as specified and directed.

M&L for preparing Newly plastered surfaces and apply a coat of 2mm thick wall care putty for making smooth surface and applying two coats of distemper oil emulsion over coat of primer on surfaces of walls.

Sand filling under floors or in foundations including watering and consolidations complete all as specified and directed.

M&L Machine pressed precast concrete interlocking paver block any shape and size conforming to IS 15658-2006 of 60mm thickness M-40 Grade with grey cement and pigment complete all as specified and directed.

M & L Providing, Type B1 (1:2:4) 20 mm graded aggregate cement concrete in roof kerbs or mud stops, rounded or chamfered on edges in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses,lacing courses, parapets and railings upto 60 cm in height,copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including eathering, slightly rounded or chamfered angles and throating as directed.

M&L point wiring with PVC insulated FRLS 1100 Volts unsheathed cable 1.5 Sqmm multistranded copper conductor and drawing concealed in wall & including nonmetalic rigid new PVC conduit medium grade ISI Marked not less than 20 mm dia of conduit, terminal box of 1.6 mm thick and 3 mm thick hylam sheet cover for terminal boxes also including porvision of earth wire PVC insulated FRLS 1100 Volts unsheathed 1.5 sqmm stranded copper conductor single core cable connected to common earth dolly the following :

All as per Item No 90 above but one light/fan point controlled by one by one way switch.

All as per Item No 90 above but one 3 pin socket outlet 5 hole 5 Amp independent board , socket & switches to be measured and paid separately.

All as per item No 90 above but one 3 pin 5 Amps socket outlet point controlled by one No one way switch on same board

One power point with insulated stranded copper conductor cable 4 Sqmm single core for 3 pin 15 Amp switch socket and PVC insulated FRLS 1100 Volts unsheathed copper conductor 4 Sqmm in and including new PVC conduit medium grade not less than 20 mm dia, stranded conductor as earth wire connected to dolly complete.

M&L switch piano flush type 5 Amp SP one way ISI marked complete all as specified.

M&L socket outlet 5 pin 5 Amp flush type ISI marked complete all as specified.

M&L switch piano flush type 15 Amp SP one way ISI marked complete all as specified.

M&L socket outlet 2 in 1,3 pin 5/15 Amps ISI marked complete all as specified.

S & F electronic fan regulator 5 step ISI marked connecting complete all as specified.

M&L ceiling rose 3 phase PVC polycorbonate,isolated body. complete all as specified.

M&L for submain wiring with two single core PVC insulated FRLS 1100 Volts unseathed stranded copper conductor cable 4 Sqmm in and including new PVC conduit medium grade not less than 20 mm dia, for submain wiring and connection complete FRLS 1100 volts unsheathed stranded copper conuctor cable of 4.0 Sqmm size stranded conductor as earthwire.

M & L for earthing complete with galvanized steel earth plate 600x600x6mm thick buried vertically in ground to depth not less than 2.25 mtr below ground level, with top edge of the plate not less than 1.50 mtr below normal ground level, connected to earth lead GI 4mm dia by means of bolts, nuts, check nuts and washers of galvanized iron and connection to main switch board of panel, including watering pipe GI 20 mm bore light grade 15mm bore for earthing lead, wire mess, funnel, salt, charcoal dust, excavation and refilling pit with PCC 1:2:4 type B1(using 20mm dia stone aggregate) reinforced with 6mm dia round bar @ 75mm cement concrete both always with MS handle 12mm dai and frame all as shown in electric plate No 3 in page 497 of SSR Part I (2009) including testing ion completion all as directed.

M&L for earth continuity conductor or main earthing lead fixed to wall on batten or recessed or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc 4 mm dia galvanised or steel wire complete all as specified.

Supply and fix MCB DB SPN 8 way Horizontal, IP - 43 Protection double door 240 V AC 50Hz with for MCB SPN as incomer and SP MCBs as out going with tinned copper bus bar ,neutral link earth link complete.

M&L MCB SPN 40 Amp "B " curve all as specified.

M&L MCB SP 6 to 32 Amp "B" curve all as specified.

Supply and fix LED batten luminaire surface mounted, 4 feet system wattage of 22 Watts with lifetime of 50000 burning hours with 70% of its initial lumen maintained. CRI>80, Power Factor > 0.95, THD< 10%, colour temperature - 6500K, surge protection 2.5KV in CM, IP-20 protected, meets LED IS specifications, Class - 1, Short circuit and over circuit protection, voltage range - 150 to 270 Volts AC, temperature range 0 to 50 DegreeC, system efficacy at luminarie level > 100 Lumens/watt and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixed complete.

Supply and fix 35 W High efficient LED Street light fitting with pressure die cast LM6 Aluminum housing and has lenses specially designed for Street Lighting with polycarbonate cover. System level efficacy of the Luminarie is 100lm/W with a life class of 50,000 burning hours at L70. The color temperature is around 6500 K with a color rendering index of 70. The luminaire is IP:66 protected with IK05 impact resistance. It has an electronic driver complaint to IEC safety standards with a power factor>.0.9, voltage variation range 120-270V, THD<20%, High and low protection along with a surge protection of 4 KV including provision of 40mm dia GI light grade pipe1.5 meter length bend to shape and necessary clamps etc for fixing the light fittings on pole fixed complete.

Supply and fixing ceiling fans three blade, Robust and reliable inverter motor (brush less DC Motor) powered by ECM technology, BEE 5 star rating for energy saving, rated Air delivery >220 cum/min, service valve > 6, AC single phase 230/240 V of size 1200 mm sweep including making connection with three core flexible, copper cable pvc insulated of suitable length, complete all as directed. Note: Ceiling Fan must operated on electronic Regulator, it should not be remote operated.

S&f Wall mounted fans AC single phase 230/240 V, of size 400 mm sweep, aerodynamic design, air delivery >70 CMM, 3 blade, double chord, thermal overload protected motor, speed RPM 1400, Sturdy and shock proof body for fixing of wall fan complete. speed RPM 1400,Sturdy and shock proof body for fixing of wall fan complete.

Material & labour for installation, testing & commissioning XLPE insulated PVC sheathed armoured heavy duty electric cable with stranded aluminium conductor 1100 volts grade, cross sectional area 16 Sqmm 2.0 core complete all as specified and directed.

S&F in repair GI tubing light grade in trenches/fixed to wall/ceiling including required GI fitting of size 32 mm dia complete all as specified and directed.

Supplying laying sand cushioning for cable protection in trenches 8 cm thick layer before laying cable and 15 cm thick layer over the cable including well punning complete all as specified and directed.

Supplying laying sub class ‘B’ bricks old size (23 x 11.5 x 7.5) CM with axis of the bricks perpendicular to the axis of the cable as in cable protection complete all as specified and directed.

Schedule of Credit

SHREE RAM BUILD TECH (BID ID -3264847)

R S CONSTRUCTION CO. (BID ID -3264134)

imran construction company (BID ID -3264944)

DEEP BUILDER (BID ID -3264013)