REPAIR OF CHARPOY GI PIPE AND MODULAR FURNITURE AT BSO FURNITURE YARD UNDER GE (NW) BHANDUP

Amount

SCH 'A' PART -I (Steel Furniture and Other) Almirah large steel (special type) (FD-83, FD-104, FD-1033, FD-1031, TP) S&F in repairs handle Chromium plated of size 150 mm grip length with both sides screwed to Almirah large steel special type,complete all as specified, directed and shown on drgs.

S&F in repairs locking device 1st quality brass 6 lever locks iron body with duplicate keys chromium plated to Almirah large steel special type ,complete all as specified, directed and shown on drgs.

S&F in repairs legs of Almirah large steel special type and providing new by welding made out of 18 gauge MS Sheet into required shape for steel almirah ,complete all as specified, directed and shown on drgs.

S&F in repairs shelves for Almirah large steel special type with MS sheet CRC 1mm thick bent to shape including welding to the almirahs,complete all as specified, directed and shown on drgs.

M&L for removal of existing worn out painting from in side & outside including preparation of surface frame complete and M&L for applying two coats of 1st quality synthetic enamel paint Olive Green over a coat of red oxide primer,complete all as specified, directed and shown on drgs.

Almirah med steel (special type) (FD-104, FD-114, FD-1032 & TP) S&F in repairs handle Chromium plated of size 150 mm grip length with both sides screwed to Almirah medium steel special type,complete all as specified, directed and shown on drgs.

S&F in repairs locking device 1st quality brass 6 lever locks iron body with duplicate keys chromium plated to Almirah medium steel special type ,complete all as specified, directed and shown on drgs.

S&F in repairs legs of Almirah medium steel special type and providing new by welding made out of 18 gauge MS Sheet into required shape for steel almirah ,complete all as specified, directed and shown on drgs.

S&F in repairs shelves for Almirah medium steel special type with MS sheet CRC 1mm thick bent to shape including welding to the almirahs,complete all as specified, directed and shown on drgs.

M&L for removal of existing worn out painting from in side & outside including preparation of surface frame complete and M&L for applying two coats of 1st quality synthetic enamel paint Olive Green over a coat of red oxide primer,complete all as specified, directed and shown on drgs.

Cabinet filling steel 4 drawer M&L for removal of existing worn out painting from in side & outside including preparation of surface frame complete of the following steel furniture and M&L for applying two coats of 1st quality synthetic enamel paint Olive Green over a coat of red oxide primer,complete all as specified, directed and shown on drgs.

Removing of unsv locks and providing new locks of size 50mm 4 lever with brass lever and steel casing and stainless steel keys in duplicate for cabinet filling with three side drawer.

Table Office Officers Steel (FD-84) S&F in repairs drawers made of 20 gauge MS Sheet duly finished with standard workmanship for Table Office Officers Steel including preparation of surface & applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified, directed and shown on drgs.

S&F in repairs top of Table office officer steel top with 18mm thick prelaminated particle board one side teak facing and balancing white on other side all the four edges provided with 4mm thick first class teak wood beading,complete all as specified, directed and shown on drgs.

S&F MS Lock (6 lever brass levers) with duplicate keys for drawers/cup-board,complete all as specified, directed and shown on drgs.

M&L for spot welding of broken joints 25mm to 75mm after preparation of surface & applying two coats of Olive Green synthetic enamel paint over a coat of red oxide primer to match with existing shade etc complete all as specified, directed and shown on drgs.

S&F Leg Made out of square pipe 25mm square pipe having wall thickness 1.6mm including preparation of surface & applying two coats of synthetic enamel paint over two coats of red oxide primer complete all as specified, directed and shown on drgs.

S&F Hard Rubber/PVC toe of superior quality as approved & as directed by Engr-in-charge.

Removal of existing worn out painting from in side & outside including preparation of surface frame complete of the following steel furniture and M&L for applying two coats of 1st quality synthetic enamel paint Olive Green over a coat of red oxide primer,complete all as specified, directed and shown on drgs.

Table Office Clerk steel (FD-84/85 -(M)and FD-1004) S&F in repairs drawers made of 20 gauge MS Sheet duly finished with standard workmanship for Table Office Clerk Steel including preparation of surface & applying two coats of synthetic enamel paint over a coat of red oxide primer to match with existing shade etc complete all as specified, directed and shown on drgs.

S&F in repairs top of Table office clerk steel top with 18mm thick prelaminated particle board one side teak facing and balancing white on other side all the four edges provided with 4mm thick first class teak/paduak wood beading,complete all as specified, directed and shown on drgs.

S&F MS Lock (6 lever brass levers) with duplicate keys for drawers/cup-board, as per approved sample & as directed by Engr-in-charge.

M & L for spot welding of broken joints 25mm to 75mm after preparation of surface & applying two coats of Olive Green synthetic enamel paint over a coat of red oxide primer to match with existing shade etc complete all as specified, directed and shown on drgs.

S&F in repair to leg Made out of square pipe 25mm square pipe having wall thickness 1.6mm including preparation of surface & applying two coats of synthetic enamel paint over two coats of red oxide primer complete all as specified, directed and shown on drgs.

S&F to Hard Rubber/PVC toe of superior quality as approved & as directed by Engr-in-charge.

M&L for removal of existing worn out painting from in side & outside including preparation of surface frame complete of the following steel furniture and M&L for applying two coats of 1st quality synthetic enamel paint Olive Green over a coat of red oxide primer,complete all as specified, directed and shown on drgs.

Chair Executive Removing of unsv seat and supply/fixing new seats made out of 12mm thick plywood both sides commercial uphostered with 32 density x 50mm thick covered with leatherite rexian cloth of approved by GE. Tapestery cloth pricesnot less than 350 per Rm apply as per best trade practice to be fitted with MS screws with nuts and bolts (Screws) of required size of seats as per drg.(FD-89030)

Removing of unsv back and supply/fixing new back made out of 12mm thick plywood both side commercial uphostered with foam 32 density x 25mm thick covered with leatherite rexian cloth of approved quality of prices and range 350 per RM apply as per trade practicle to be fitted with Ms screws with nuts and bolts of required size of back.(FD-89030)

M&L for gas welding of chair revolving wherever required (PCH-7001D)

Removal of unsv PVC wheel supply and fixing new PVC wheel best quality and approved by GE.(PCH-7001D)

Removal of unsv arms S&F new arms PVC best quality and approved by GE.(PCH-7001D)

Chair Auditorium Removing of unsv seat and supply/fixing new seats made out of 12mm thick plywood both sides commercial uphostered with 32 density x50mm thick covered with leatherite rexin cloth of approved by GE. Tapestery cloth prices not less than 450 per RM apply as per best quality best trade practice to be fitted with MS screws with nuts & bolts (Screws) of required size of seats as per drg.

Removing of unsv back and supply/fixing new back made out of 12mm thick plywood both side commercial uphostered with foam 32 density x 25mm thick covered with leatherite rexian cloth of approved quality of prices range not less than 450 per RM apply as per trade practicle to be fitted with MS screws with nuts & bolts of required size of back.

M&L for gas welding of chair auditorium wherever required

Removal of unsv PVC arms S&F of new PVC arms best quality and approved by GE.

M&L for PVC beading of chair auditorium wherever required of pvc beading and replacement of new pvc beading best quality and approved by GE.

Rack Steel enclosed 3075X900X500mm M&L preparation of surfaces of steel surfaces applying two coats of synthetice enamel paint smoke grey shade over a coat of steel primer complete all as specified

Almirah mess utensil (FD-93) Removing of unservicable shelf of size (1025x420x19mm) from almirah mess utensil & providind/fixing new shelf of the same size made out of 1st class hard wood indian seasoned teak wood all as specified and shown on drg.

Removing of unservicable shelf of size (1025x270x19mm) from book case & providind/fixing new shelf of the same size made out of 1st class hard wood indian seasoned teak wood all as specified and shown on drg.

Removing of unsv back plywood from almirah mess utensil & providing/fixing new plywood 6mm thick BWR grade & providing 4mm thick teak wood beading for wherever necessary & french polishing complete.

Removing of unservicable shutter from almirah mess utensil & providind/fixing with new shutter made out of prelaminated particle board 18mm thick all as specified and shown on drg.

SCH 'A' PART -II (Wooden Furniture) Bed hard without MNF set (FD/E6/MAP/08) Removing of unserviceable plywood from bed hard supply and fixing 12mm thick commercial plywood sheet on top suitable for bed hard as shown on drawing or approximate size 1980x900mm BWR grade (Water proof exterior grade) of ISI marked duly painted with black paint complete all as shown on drawing and as approved by GE. Make : Green ply , Kitply, Archid

Table writing OR's (3'x 2') (DB-3958) Replacement of unsv top of Table writing ORs & providing new top made out of 18 mm thick pre laminated particle board confirming to IS 3087-1985 4mm thick teak wood beading all round including tightening the frame all as specified and shown on drg.

Removable unsv/broken drawer from table writing ORs and providing new drawer made out of 1st class hard wood indian seasoned teak wood and fixing of joint with glue and suitable bamboo pins duly french polish.

Removable unsv/broken stiffener longer from table writing ORs and providing new stiffener longer made out of 1st class hard wood indian seasoned teak wood and fixing of joint with glue and suitable bamboo pins duly french polish.

Removable unsv/broken stiffener shorter from table writing ORs and providing new stiffener shorter made out of 1st class hard wood indian seasoned teak wood and fixing of joint with glue and suitable bamboo pins duly french polish.

Book Case (special type) (DB-4073/(FD-45/237)/F-8) Removing of unservicable top from book case & providind/fixing with new top made out of prelaminated particle board 18mm thick all as specified and shown on drg.

Removing of unservicable side from book case & providind/fixing with new side made out of prelaminated particle board 18mm thick all as specified and shown on drg.(DB-4071,DB-4021, FD-237, F-8 )

Removing of unservicable shelf from book case & providind/fixing with new shelf made out of prelaminated particle board 18mm thick all as specified and shown on drg.(DB-4071,DB-4021, FD-237, F-8)

Removing of unservicable shutter from book case & providind/fixing with new shutter made out of prelaminated particle board 18mm thick all as specified and shown on drg.(DB-4071,DB-4021, FD-237, F-8)

Removing of unsv back plywood from book case & providing/fixing new plywood 6mm thick BWR grade & providing 4mm thick teak wood beading for wherever necessary & french polishing complete.

Removing of unservicable leg frame from book case & providing with new leg frame made out of 1st class hard wood teak & including french polishing complete all as specified and shown on drawing (DB-4071,DB-4021, FD-237, F-8)

Chair Dinning with long back (FD-279(M)) Removable unsv/broken Rear Leg and providing new legs made out of 1st class hard wood indian seasoned teak wood including tightening of seat frame and fixing of joint with glue and suitable bamboo pins duly french polish.

Removable unsv/broken front leg and providing new legs made out of 1st class hard wood indian seasoned teak wood including tightening of seat frame and fixing of joint with glue and suitable bamboo pins duly french polish.

Removable unsv/broken stiffner and providing new stiffners made out of 1st class hard wood indian seasoned teak wood including tightening of seat frame and fixing of joint with glue and suitable bamboo pins duly french polish.

Removable unsv/broken back rest and providing back made out of 1st class hard wood indian seasoned teak wood including tightening of seat frame and fixing of joint with glue and suitable bamboo pins duly french polish.

Removing and supply and fixing of the unserviceable cushion of chair dinning long back with cushion and providing new cushion 50mm thick 32 density & covered with new tapestry cloth costing not less than Rs. 250/- per RM over the white kora cloth duly stiched to chair dinning long back with cushion as per drawing.

Trolley for TV (FD/E6/MAP/04) Removing of unsv/broken glass shutter from TV Trolley and providing/fixing new sliding door shutter(double leaf)made out of acrylic transparent sheet 5mm thick fixing with two way aluminium channel 1mm thick all round including two Nos runner wheels and one Nos chromium plated knob to each shutter as directed by the Engr-in-Charge. All as shown in drg No FD/E6/MAP/04

Removing of unsv/broken bottom from TV Trolley and providing new bottom made out of 18mm thick prelaminated particle board exterior grade fixing with glue and metal screws to TV Trolley as directed by Engr-in-Charge as specified and shown on drg No FD/E6/MAP/04.

All as per Item No 14.01 here-in-before but for Top of TV Trolley all as shown in drg No FD/E6/MAP/04.

All as per Item No 14.01 here-in-before but for side of TV Trolley all as shown in drg No FD/E6/MAP/04..

All as per Item No 14.01 here-in-before but for back of TV Trolley all as shown in drg No FD/E6/MAP/04..

Removing of unsv/broken castors from TV Trolley and providing/fixing new castorsall as shown in drg No FD/E6/MAP/04.

Charpoy GI pipe (FD-220) Removing unserviceable Ply top from charpoy GI Pipe, tightening complete charpoy ie loose checknuts ,elbows,Long Rails and short Rails and S&F ply wood 12mm thick, 7 Ply ,commercial Type,BWR Grade ISI Marked of size 1980x900mm complete all as specified and directed. .

M&L Removing old unserviceable long rail from GI pipe Charpoy and supply and fixing new long rail of size 1884mm long made out of 32 mm bore medium grade GI Pipe duly threaded on both ends and fixing to charpoy complete all as specified and as directed by Engineer-in-charge. Note ;- 1. The items includes threading both sides in new long rail also 2 Old unserviceable long rail obtained shall be reused in Item No 03 below.

M&L for removing old unserviceable short rail from GI Charpoy and fixing new short rails of size 814mm long made out of long rails retrieved vide items No 2 herein before duly thereded on both ends fixing to charpoy complete all as specified and directed.

M&L removing old unserviceable legs from GI Charpoy and fixing new legs of size 394 mm long made out of short Rails retreved vide item No 3 here in before duly threaded on one end encluding 3mm thick MS sheet( made to shap of the bottom) in bottom and two Nos clamps as shown on Drg by belding complete all as specified and directed by Engr In Charge.

M&L for Removing old unserviceable three way elbow and supply and fixing new elbow 32 mm bore (ISI marked) to GI Pipe charpoy, complete all as specified and as directed by Engineer-in-charge.

M&L for Removing old unserviceable check nuts and supply and fixing new check nuts 32 mm bore 6mm thick to GI Charpoy, all as specified and as directed by Engineer-in-charge.

M&L for Removing old unserviceable legs from GI charpoy and fixing new leg of size 394 mm duly thereaded one end and including 3 mm thick MS Sheet ( made to shap of the bottom) in bottom two nos of clamps ( as shown on drawing) by belding complete all as specified and directed by engr in charge.

M & L for removing of existing newar from charpoy GI pipe, tightening of charpoy frame including replacing GI check nuts, GI elbow 3 way, long/short rails, legs of charpoy GI pipe and providing Flat iron CLEATS 40mm x 6mm not less than 15 mm long welded to GI pipe including drilling of holes on each cleats duly painted with two coats of aluminium paint over a coat of red oxide primer for fixing the plywood with nut and bolts (02 Nos on each short rail, 02 Nos on each long rail ) and providing stiffners of 40 mm x 6 mm thick 01 No between long rail to long rail duly welded & providing 12 mm thick plywood commercial type BWR grade on top including 3mm thich wood beading on all side edges of plywood and one coat of wood primer and one coad of paint light brown (Make : Asian/Shalimer/Berger) of plywood fixing with nut bolt 6 mm dia 35 mm long (10 Nos), all as specified and directed and shown in drg FD-220. Note : GI check nut, GI elbow 3 way, long/short rails, legs shall be measured and paid seperately as supply only and conversion for reuse).

REETA ENTERPRISES

Dimalson Decorator

Parmatma Enterprises