KRISHNAGIRI DT _ THALLY BLOCK _ 15TH FINANCE COMMISSION _ HEALTH CENTRE _ 2024-25 _ 1_ CONSTRUCTION OF NEW HEALTH SUB CENTRE BUILDING AT SULAKUNTA H/O MADAKKAL _ RS.50.00_PACKAGE_TLY_023

Amount

1. Construction of New Health Sub Centre building at Sulakunta H/o Madakkal - Rs. 50.00 Lakhs

Earthwork Excavation for foundation in all soils and sub soils and to full depth as may be directed except in rock requiring blasting, but inclusive of shoring, strutting and baling out water wherever necessary and refilling the sides of foundation with excavated earth in layers of not more than 15cm thick, well rammed and consolidated and depositing the surplus earth within the compound in places shown by the departmental officers with initial lead and lift etc., complete complying with standard specification.

Earthwork excavation in hard stiff clay, stiff black cotton, hard red earth, shales, murram, gravel stony earth earth mixed with small size boulders and sub soils and to full depth as may be directed except in rock requiring blasting but inclusive of shoring, strutting and baling out water wherever necessary and depositing in places with initial lead and lift etc., complete complying with standard specification.

Supplying and filling in foundation and basement with Filling Sand in layers of not more than 15cm thick, well watered,rammed and consolidated complying with standard specification etc., complete.

Cement Concrete 1:4:8 (One Cement, Four M.Sand and eight hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick, well rammed, consolidated and curing etc. complete complying with standard specification

Filling in foundation and basement with Excavated Earth (Other than sand) in layers of not more than 15cm thick, well watered,rammed and consolidated etc., complying with standard specification etc., complete.

Brick Work in cement mortar 1:5 (One cement and five sand) using Ground moulded chamber burnt bricks of size 9" x 4 3/8" x 2 3/4" (23 x 11 x 7cm) for the following including curing etc., complete complying with standard specifications. (Masonry projections wherever necessary for obtaining required elevation shall be done without extra cost). For Foundation and basement

FOR SUPERSTRUCTURE IN GROUND FLOOR

FOR SUPERSTRUCTURE IN FIRST FLOOR

Brick Work in cement mortar 1:3 (One cement and three sand) using Ground moulded chamber burnt bricks of size 9" x 4 3/8" x 2 3/4" (23 x 11 x 7cm) for the following including curing etc., complete complying with standard specifications. (Masonry projections wherever necessary for obtaining required elevation shall be done without extra cost). For Foundation and basement

Supplying and erecting shuttering including necessary supports for plane surfacesin foundation and in all floors for Rcc column footings, Plinth Beams, Staircase steps etc.,using mild steel sheets of suitable size 90cm x 60Cm and BG 10 stiffened with welded mild steel angles for boarding supported by Casuarina props of 10cm to 13cm diametre spaced at suitable intervals etc., complete complying with standard specfication and as directed by the departmental officers.

Supplying and erecting Centering for sides and soffits including supports and strutting upto 3.29 m height for plane surfaces such as Rcc Slabs, Rectangular beams, TEE or ELL beams, Lintels, Bed blocks,Staircase waist and landing slabs, landing beams, canopy etc., with all cross bracings using mild steel sheets of size 90cm x 60cm and BG 10 stiffened with welded mild steel angles of size 25mm x 25mm x 3mm for boarding laid over Silver oak joists of size 10cm x 6.50cm spaced at about 90cm centre to centre and supported by Casuarina props of 10cm to 13cm diametre spaced at 75cm centre to centre etc., complete complying with standard specfication and as directed by the departmental officers.

Supplying and erecting Centering and Shuttering for sides and soiffts including supports and strutting upto 3.29m height for plane surfaces such as RCC Rectangular Columns, top and bottom sides of RCC boxing, sill slabs, sunshades etc., in all floors using mild steel sheets of size 90cm x 60cm and BG 10 stiffened with welded mild steel angles of size 25mm x 25mm x 3mm for boarding laid over Silver Oak joists of size 10cm x 6.5cm spaced at about 90cm centre to centre and supported by Casuarina props of 10cm to 13cm diametre spaced at 75cm centre to centre etc., complete complying with standard specfication and as directed by the departmental officers.

Providing and laying in position, standardised concrete Mix M-20 Grade in accordance using 20mm and down graded hard broken granite stone jelly for all RCC items of works withw mithin iImSu:4m5 6c-e2m00e0n,t content of 325 kg/ms and maximum water cement ratio of 0.55, including admixture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, reta?d setting of concrete, improve workability without impairing strength and durability with about (5 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu'm') 7670 kg. of sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS standards. (No separate payment will be made by the Department for the excess usage of materials). a)Foundation & Basement

b)Super structure In Ground Floor

Super structure In First Floor

Supplying, fabricating and placing in position of Steel Reinforcement using mild steel / ribbed tor steel rodes for all RCC works as per the design given including cost of steel and binding wire in all floors complying with standard specification and drawings. Using M.S Rods of Required size.

Brick partition wall of the following thickness in cement mortar 1:3 (One cement and three sand) using best quality of second class Ground moulded bricks of size 9" x 43/8" x 23/4" (23 x 11 x 7cm) etc., complete complying with standard specification. a)11.00cm thick in Ground floor

b)11.00cm thick in First floor

Plain Cement Concrete 1:2:4 (one cement, two M.Sand and four hard broken stone jelly) using 20mm jelly for wearing coat including laying, compacting, finishing and curing, etc., complete as per standard specificatins and as directed by the departmental officers.

Supplying and fixing of Pre polished Cuddapah slab of 25 mm thick with machine cut edge, set in cement mortar 1:3 (One cement and three sand) 12 mm thick base abpve the existing bed concrete and pointed with cement mortar 1:3(One cement and three sand) mixed with black oxide to full depth of slabs and rubbed smooth polishing to higher degree as directed by the departmental officers.

Paving the floor with pre-polished concrete anti-skid step tiles (Required shape and design) of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One Cement and Three crushed stone M.Sand) 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Paving the floor with best approved quality fine polished Granite Stone Slabs of size 1200 x 600 of 18 / 20mm thick of Synthetic Grey, Paradise and similar varieties with machine cut edges laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three crushed stone M.Sand) fixing the slabs with required cement slurry and laid in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments etc., The granite stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification.

Providing Single Nosing for the Cuddapah slab / granite slab of approved quality including required tools and plants power supply labour charges etc, complete as directed by the Departmental officers.

Paving the floor with pre-polished concrete anti-skid tiles (Required shape and design) of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One Cement and Three crushed stone M.Sand) 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works) Using anti-skid tiles (Observed Data)

Dadooing walls with following best approved quality, white / colour glazed tiles of following sizes set in Cement Mortar 1:2 (One Cement and Two crushed stone M.Sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc., complying with standard specification and as directed by the departmental officers.

Weathering Course concrete using best quality broken brick jelly of size 20mm uniform gauge in pure slaked lime (no sand to be added) over the RCC roof slabs, the proportion of brick jelly to lime being 32:12.5 by valume and laid over in a single layer and consolidated to the required designed and finished thickness by beating the concrete with wooden beaters of approved pattern keeping the surface constantly wet by sprinking lime jaggery water as per standard specification etc., complete and as directed by the departmental officers.

Finishing the top of roof with one course of new Pressed Tiles of size 23cm x 23cm x 2cm of approved quality laid in cement mortar 1:3 (One cement and three sand) 12mm thick mixed with water proofing compound conforming to I.S at 2% by weight of cement used and the joints pointed with same mortar mixed with re oxide to the full depth of tiles, etc., complete complying with standard specification. and as directed by the departmental officers.

Flooring with scratch proof Virtified tiles of approved quality and colour of size 600 x 600 x 8 mm in all floors over 20mm thick, cement mortar 1:3 base above the existing bed concrete and pointing with the same colour cement added with colour pigments at 4.00Kg/m2 etc., complete complying with standard specification.

Stainless Steel (Salem Stainless Steel) Door Frame (Box Section using Stainless Steel Plate of 1.6mm thick) of size 100mm x 60mm with a rebate of 30 / 35mm x 15mm on one side of the frame including supplying and fixing dovetail splayed end stainless steel hold fast etc.(M-0400)

Manufacturing supplying and fixing in position solid core medium density fiber board (Exterior grade) flush shutters of nominal thickness of 35mm single or double shutters of and size confirming to I.S. 12406 with necessary rebate cutting external lipping allround with teakwood and including cost of required aluminium anodized furniture fittings with ISI mark wind appliances labour charges fitting with necessary aluminium screw and the shutters fixed to frame in position etc.,complete as per standard specifications and as directed by the departmental officers. (M--0385)

Supplying and fixing UPVC Window (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work

Supplying and fixing UPVC Ventilator (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on wor

Solid PVC Door shutter using 19 gauge 19mm MS sq. tubes for styles and outer frames, 15mm MS sq. tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC sheets. Shutter using 5mm thick solid PVC sheets for paneling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm, with suitable suitable rebate for housing the shutter.(Solid panel PVC Door with frame)

Supplying and fixing M.S Grill of required size using necessary M.S angles, flats for inner and outer members which should be fixed or welded to masonry of columns including necessary dismandling or making holes and redoing the same to original condition as directed by the departmental officers inclusive of providing one coat of red oxide primer etc., complete.

Plastering with Cement Mortar 1:5 (One cement and Five M.Sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers.

Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The Surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc., complete complying with standard specifications and as directed by the Departmental Officers. [ The rates are inclusive of hire charges for grinding machine with wheel, cost of sand paper (waterproof abrasive sheet), cost of putty blade, labour charges for grinding the joints and sand papering, two coat of putty, scrapping the putty area to level the surface smooth, etc., complete]. The Putty shoule be got approved by the Executive Engineer before use on work. Centering area for Slabs, Beams etc.,

Special Ceiling Plastering and finishing all the RCC exposed surfaces such as RCC slabs, sunshades canopies staircase steps, landing slabs etc., with cement mortar 1:3 (One cement and three sand) 10mm thick including hacking the surfaces and providing necessary cement mortar nosing neading as per standard size and specification wherever necessary using the same mix as directed by the departmental officers etc., complete complying with standard specification.

Plastering with cement mortar 1:3 (One cement and three sand) 12mm thick mixed with water proofing compound conforming to I.S.S at 2% by weight of cement used etc., in all floors complying with standard specification.

Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.

Painting New Iron works for doors windows and ventilators, iron bars, weldmesh, wiremesh, screen, steel bars, flats and other similar works etc., with two coats of qpproved first quality of synthetic enamel paint over the existing red oxide primer in all floors. The rate is inclusive of cost of all materials and labour, brushes and scaffolding charges etc., complete complying with standard specification. (The cement paint should be got approved by the Executive Engineer before use on works.

Painting new wood work with two finishing coats of synthetic enamel ready mixed paint of approved quality and colour over one coat priming coat in all floors including the cost of primer etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)

Supplying And Fixing of Steel Doors And Windows including Cost and Conveyance of All Charges etc.. Complete Window W

Window W1

Ventilator V

Providing and fixing the following diameter rain water Down Fall pipe including fixing fratting at the junction of parapet and RCC floor or roof slap including finishing etc the rate is to included of teak wood plugs to used is 150 x 25 cm infront and 200 x 75 mm in all other sides with a depth of 100 mm the pipe is to be fixed by means of U clamps at the centre of the pipe of is to sorewed to the plugs. The special type of U clamps at the centre of the pipe is to be fixed in addition to this for more than 3mm pipe length etc., complete complying with standard specification and as directed by the departmental officers.

Supplying And Fixing of Following GI/PVC Pipes And Specials for Water Supply and Sanitary Arrangements including all cost of men and materials etc.. Complete a)160 mm dia PVC pipe :-

b)110 mm dia PVC Pipe

c)75mm dia PVC Pipe

110mm dia Plain bend

75mm dia Plain bend

110mm dia TEE

75mm dia Elbow

75mm dia Tee with Door

110mm dia Tee with Door

32mm dia GI Pipe Main to sump

25mm dia GI Pipe Sump to OHT

20mm dia GI Pipe Inner Line

32mm dia GI Pipe Main to sump

25mm dia GI Pipe

20mm dia GI Pipe

25mm dia GI Elbow

25mm dia GI Coupling

25mm dia GI Tee

25mm x 20mm dia GI Reducer

20mm dia GI Elbow

20mm dia GI Coupling

20mm dia GI Tee

20mm x 15mm dia GI Reducer

32mm dia G.I Elbow

32mm dia G.I Tee

32mm dia G.I Union

25 mm dia GI union

20 mm dia GI union

32x 25mm G.I Reducer

Supplying and fixing the following size of Gun metal Gate valve / Wheel valve (Heavy type) of approved quality and good variety but including necessary cutting and threading of G.I.Pipes for jointing the valves as directed by the departmental officers. 32mm diameter G.M. Wheel valve

25 mm dia G.M. Gate valve

20mm dia G.M. Wheel valve

Supplying and fixing 15mm diameter brass chromium plated heavy type screw down tap of approved make conforming to ISI specifications and quality including cost of cotton thread, white lead etc., complete complying with standard specifications. (Screw down taps are to be got approved by the Executive Engineer before use on work)

Supplying and fixing Swan neck tap of 15mm diameter of approved make conforming to ISI specifications and quality including cost of cotton thread, white lead etc., complete complying with standard specifications.

Supplying and fixing in position of best white glazed earthenware Oriya type indian water closet of approved quality of size 580 x 440mm with P or S trap conforming to ISI 22556 para XII with sand cushion and embedding the closet with trap to shape in position with 40mm brick jelly lime concrete 1:2:5(one lime, two sand and five brick jelly) 100 mm thick and finishing the top to the required slope and including supply of 0.6m long 110mm diametre PVC pipe by dismantling masonry floor or RCC works and redoing the same to the original condition without any leakage etc., as directed by the departmental officers.(The water closet should be got approved by the executive engineer before use on work.

Supplying and fixing in position colour glazed European water closet with 'P' trap and double flapped seat cover, 10 litre capacity PVC don level automatic flushing tank including all internal fittings fixed on C.I Brackets, 12mm PVC or brass nipple, chromium plated brown headed stopcock, 12mm nylon connection with necessary teakwood plugs, clamps, screws to the portion coming with walls and floors including dismantling masonry and redoing the same to the original condition. (The EWC should be got approved by the E.E before us on work)

Supplying and fixing in position of best Indian make white glazed earthenware Wash hand Basin of size 550 x 400mm with a pair of C.I brackets, 15mm dia brass chromium plated tap, 32mm dia G.I waste water pipe, 32mm dia Chromium plated brass waste coupling, plug with chain, 15mm dia PVC connection, 15mm dia Gun metal wheel valve with ISI mark, and necessary G.I. union and G.I elbow, including fixing the wash hand basin in position with white lead, clamps, teak wood plugs, screws, rubber washer, conducting necessary leakage tests etc., complete complying with standard specification.

Supplying and fixing in position best quality approved make white glazed earthernwere sink of size of 600 x 450 x 200mm including cost of 32mm dia CP waste coupling, 32mm dia PVC waste pipe with rubber plug and chain, 15mm dia brass nipple including fixing the sink in position and testing for leakages etc., complete complying with standard specifications excluding CI brackets. [The sink and specials should be got approved by the Executive Engineer before use on works]

Supplying and fixing position CI Nahani Trap / Floor Trap of the following sizes with best stainless steel gratings of approved brand and quality, fixed over a bed of brick jelly lime concrete 1:2:5 (One part of lime, two part of crushed stone M.Sandand five part of 40mm gauge brick jelly) and finished with Cement Mortar 1:3 (One Cement, Three M.Sand) including dismantling masonry works wherever found necessary and making good the dismantled portions to the original condition and giving connection to the CI / PVC pipes, etc., complete complying with standard specification. (The Nahani Trap should be got approved by the Executive Engineer before use on works)

Supplying and fixing in position best quality approved make of Stainless steel sink of size 600 x 450 x 200 mm including cost of 32mm dia C.P waste,Pipe with rubber plug and chain 15mm dia brass nipple including fixing the sink in position and testing for leakage etc., complete complying with standard specification. {The sink and special should be got approved by the Executive Engineer before use on works}

Supplying and fixing in position Indian make bevelled edge mirror of approved quality and brand PVC / Fibre Glass framed 600 x 450 x 5.5mm thick mirror, shelf type with hard board backing of approved colour fixed with brass screws, rawl plug, etc., complete complying with standard specification. (The mirror should be got approved by the Executive Engineer before use on woks)

Supplying and fixing approved best quality brass CP towel rail 600mm long and 20mm dia with brackets of same materials including cost of teak wood plugs and CP screws, etc., complete complying with standard specifications. (The tower rail should be got approved by Executive Engineer before use on works).

Supplying and fixing best approved best quality brass CP soap tray of size 150 x 100mm including cost of teak wood plugs, brass screws, etc., complete complying with standard specifications. (The soap tray should be got approved by Executive Engineer before use on works).

Supplying and fixing PVC ventilating shaft of 110mm dia (having working pressure 4 kg. / sq.cm) with 3 metre height including cost of PVC cylindrical cowl of best approved quality etc., complete complying with standard specifications and as directed by the departmental officers

Construction of INSPECTION CHAMBER following clear sizes including earth work excavation, CC 1:5:10 of 10 cm thick and brick work in Cement Mortar 1:5 [One cement and Five sand] using best quality of second class Table Mould Bricks of size 9" x 43/8" x 23/4" with Plastering with Cement Mortar 1:3 [One Cement and Three Sand] 12 mm thick to inner and outer sides and wearing coat 1:3:6 [One Cement, Three Sand and Six Aggregate] 15 cm thick and covered with precast slab 5 cm thick etc., complete complying as directed by the departmental officers as per standard specification. 60cmx60cm Collection chamber

90cmx90cm Inlet and outlet

Plain Cement concrete 1:2:4 (One cement two sand and four aggregate) suing machine crushed 20mm gauge hard broken granite stone jelly including laying, curing finishing etc., complete complying with standard specification. For foundation and basement

Supplying and fixing in position of best quality and approved variety of PVC Cylindrical Water Tanks of 1000 Litres capacity conforming to I.S.I. Specifications with necessary inlets and outlets and overflow, cleaning pipe arrangements and labour charges for fixing in position etc., and properly fixed in the floor top as directed by the departmental officers.

Supplying and filling 40mm hard broken granite stone jelly from approved quarry including stacking for the Dispersion Trench as directed by the departmental officers complying with standard specification.

Supplying and filling 20mm hard broken granite stone jelly from approved quarry including stacking for the Dispersion Trench as directed by the departmental officers complying with standard specification.

Casting and fixing RCC precast slabs of the following thickness in cement concrete 1:2:4 (One cement, Two sand and four broken jelly) using 10mm hard broken granite stone jelly excluding cost of reinforcement grill in position but including cost of mould, curing, finishing, fixing in position etc., complete complying with standard specification and as directed by the departmental officers in all floors. 50 mm thick

Supplying and fixing in position of partition with new one of Aluminium anodized natural colour matt finish partly PLB / Partly glazed partition with 62 x 38 x 2mm extruded box section at bottom, vertical and horizontal members. The vertical members are spaced at 90cm centre to centre and horizontal member are spaced at 1.20M , 2.10 M and 2.80M height from floor level, bottom pannels should be covered with 12mm thick PLB exterior grade and remaining should be covered with 4mm thick plain glass with necessary glazing clips, Aluminium beadings, L angles, Screws etc., The Aluminimum surface is to be anodized with matt finish under electricall controlled condition in accordance with ISI 1868 / 1962 specification for an average anodic film thickness is not less than 15 microns the rate is inclusive of cost of materials conveyance scaffolding if any required etc., and necessary dismantliing making holes in RCC masonry / Brick masonry wherever necessary with power drill to the extent required and made good to the original after fixing the partition as directed by the departmental officers. All materials should be got approved by the Executive Engineer before fixing in position

Fabricating Spplying and fixing in position of aluminium anodised natural colour matt finish half panelled with 12mm thick bothside prelaminated partile board at bottom and half glazed using 5.50mm thick Plain glass at top. The outer frame shall be with aluminium box section 101.60x44.45x3.18m at 2.319 kg/m and Shutter frame made of section bottom rail 100x44.45x2.50mm @ 1.974 kg/m,Top&Vertical rail : 50x44.45x2.50mm @ 1.292kg/m,Lock rail: 50x44.45x2.50mm @ 1.292kg/m, Alu.clips:17.15x17.27x1.50mm @ 0.176kg/m,Aluminium Handle : 100x30mm @ 0.988kg/m and necessary accessories such as aluminium clips, rubber beading, PVC felt, handle for a length of shutter (both sides), locking arrangements, furniture fittings such as aluminium tower bolts-250x12mm - 2 Nos., aluminium tower bolt 200x12mm - 1No., aluminium Hydraulic door closser - 2Nos ., lock-1No., Door stopper with rubber bush as per BIS standards including cost of all materials, labour charges and power consumption charges required for fabrication including chipping dismantling and making holes to the required extent in RCC in column/beam/masonry with power drill wherever neccessary and redoing the demaged portion to the original condition after fixing etc. complete.Alu. Section are to be anodised with matt finish under electricaly controlled condition in accordance with IS 1868/1962 for an average anodic film thickness of 15 microns etc., complete.Aluminium sections,and furniture fittings shall be got approved by the Executive Engineer incharge.

Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, onveyance, electrical charges, etc. complete

Supplying and fixing colour galvalume sheet roof of 0.47mm thickand steel tubular box section of 100x50x3mm of 1meter interval including priming coat fixing in position with all necessary accessories complete complying with standard specification and as directed by the departmental officers.

Towards Cost of Electrical Arrangements (Sub Estimate) Light / Fan point SD 25

Plug point SD 38

Concealed Power Plug Point SD 40

Ceiling Fan SD 106

Exhaust Fan SD 114

Tube Light Fitting SD 88

Bulk Head Fitting SD.No.83

TNEB meter board SD.NO.125

Service Connection SD 66

Earth Connection SD 74

EB Deposit

Towards Cost of Bore Well Arrangements (Sub Estimate) Geophysical investigation charges including preparation of Geophysical survey reports etc., all complete

Drilling of 150mm dia borewell in hard rock area including development charges and labour charges for errection of casing pipes in over burdern soil etc., all complete Drilling of 150mm dia borewell in over burden soil

150mm casing pipe (CS) with excise duty up to 80m

Drilling of 150mm Dia Bore Well Over Hard Rock Areas Upto 150m Below Ground Level

From 151m Upto 180m

From 181m upto 210m

From 211m upto 240m

From 241m upto 270m

From 271m upto 300m

From 300m upto 330m

Cost of 50lpm x250m Sub motor , Sub merisible motor

Cost of 7.5HP panel board Three phase

Labour charges for errection of 7.50 HP Submersible pumpset with GI pipes in the deep borewell including connection of Submersible cable etc., all complete

Supply and delivery of following GI/PVC pipes and specials as per relevant ISI specification for the scheme 50 mm GI Pipe Medium

50mm GI Coupling

Cost of 4 sq.mm.flat type copper - - cable - PVC insulated and sheathed 3 core flat type copper cable confirming to IS 694/1990

Borewell cover MS flat size 1cmx3mm

MS clampset

50mm GI bend

50mm GM NRV

Wooden Board

100 Amps porcelain fuse unit 500V

Construction of KIOSK With Pedestral

Construction of Bore Protection Wall

Service wirePVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming to IS 694/1990 84/0.3(6sq mm )

EB Deposit

Earth work Excavation for Foundation in all soils and Sub Soil to full depth as may be directed except in hard rock requiring blasting but inclusive of shoring strutting and requiring the sides of foundation.

63mm 6ksc PVC Pipe

Refilling the Basement with Excavated Earth including all charges etc… complete

Towards Cost of Shelf Racks (Sub Estimate) Brick work in CM 1:5 mix using country bricks ground moulded of size 22 x 11 x 7cm for the following including curing etc., complete complying with standard specifications.

Plastering with CM 1:5, 12mm thick.in all floors including curing etc., complete complying with standard specifications and as directed by the departmental officers.

Supplying and painting the walls with two coats of oil bound distemper over one coat of water based cement primer including cost for distemper, primer, cleaning and scrapping the walls, rendering the walls smooth with necessary putty, brushes, scaffolding arrangements, labour charges, etc., as per standard specification. (The colour and shade of the distemper shall be got approved by the Executive Engineer before use of work).

Providing cuddapah slab 38 to 40mm for shelfs etc., all complete

labour charges for fixing cuddapah slab 38 to 40mm for shelfs etc., all complete

Towards Cost of Shelf Racks (Sub Estimate) Brick work in CM 1:5 mix using country bricks ground moulded of size 22 x 11 x 7cm for the following including curing etc., complete complying with standard specifications.

Plastering with CM 1:5, 12mm thick.in all floors including curing etc., complete complying with standard specifications and as directed by the departmental officers.

Supplying and painting the walls with two coats of oil bound distemper over one coat of water based cement primer including cost for distemper, primer, cleaning and scrapping the walls, rendering the walls smooth with necessary putty, brushes, scaffolding arrangements, labour charges, etc., as per standard specification. (The colour and shade of the distemper shall be got approved by the Executive Engineer before use of work).

Providing cuddapah slab 38 to 40mm for shelfs etc., all complete

labour charges for fixing cuddapah slab 38 to 40mm for shelfs etc., all complete

Towards Cost of Shelf Racks (Sub Estimate) Brick work in CM 1:5 mix using country bricks ground moulded of size 22 x 11 x 7cm for the following including curing etc., complete complying with standard specifications.

Plastering with CM 1:5, 12mm thick.in all floors including curing etc., complete complying with standard specifications and as directed by the departmental officers.

Supplying and painting the walls with two coats of oil bound distemper over one coat of water based cement primer including cost for distemper, primer, cleaning and scrapping the walls, rendering the walls smooth with necessary putty, brushes, scaffolding arrangements, labour charges, etc., as per standard specification. (The colour and shade of the distemper shall be got approved by the Executive Engineer before use of work).

Providing cuddapah slab 38 to 40mm for shelfs etc., all complete

labour charges for fixing cuddapah slab 38 to 40mm for shelfs etc., all complete

Towards Cost of Shelf Racks (Sub Estimate) Brick work in CM 1:5 mix using country bricks ground moulded of size 22 x 11 x 7cm for the following including curing etc., complete complying with standard specifications.

Plastering with CM 1:5, 12mm thick.in all floors including curing etc., complete complying with standard specifications and as directed by the departmental officers.

Supplying and painting the walls with two coats of oil bound distemper over one coat of water based cement primer including cost for distemper, primer, cleaning and scrapping the walls, rendering the walls smooth with necessary putty, brushes, scaffolding arrangements, labour charges, etc., as per standard specification. (The colour and shade of the distemper shall be got approved by the Executive Engineer before use of work).

Providing cuddapah slab 38 to 40mm for shelfs etc., all complete

labour charges for fixing cuddapah slab 38 to 40mm for shelfs etc., all complete

Towards Cost of Shelf Racks (Sub Estimate) Brick work in CM 1:5 mix using country bricks ground moulded of size 22 x 11 x 7cm for the following including curing etc., complete complying with standard specifications.

Plastering with CM 1:5, 12mm thick.in all floors including curing etc., complete complying with standard specifications and as directed by the departmental officers.

Supplying and painting the walls with two coats of oil bound distemper over one coat of water based cement primer including cost for distemper, primer, cleaning and scrapping the walls, rendering the walls smooth with necessary putty, brushes, scaffolding arrangements, labour charges, etc., as per standard specification. (The colour and shade of the distemper shall be got approved by the Executive Engineer before use of work).

Providing cuddapah slab 38 to 40mm for shelfs etc., all complete

labour charges for fixing cuddapah slab 38 to 40mm for shelfs etc., all complete

Towards Cost of Shelf Racks (Sub Estimate) Brick work in CM 1:5 mix using country bricks ground moulded of size 22 x 11 x 7cm for the following including curing etc., complete complying with standard specifications.

Plastering with CM 1:5, 12mm thick.in all floors including curing etc., complete complying with standard specifications and as directed by the departmental officers.

Supplying and painting the walls with two coats of oil bound distemper over one coat of water based cement primer including cost for distemper, primer, cleaning and scrapping the walls, rendering the walls smooth with necessary putty, brushes, scaffolding arrangements, labour charges, etc., as per standard specification. (The colour and shade of the distemper shall be got approved by the Executive Engineer before use of work).

Providing cuddapah slab 38 to 40mm for shelfs etc., all complete

labour charges for fixing cuddapah slab 38 to 40mm for shelfs etc., all complete

Towards Cost of Shelf Racks (Sub Estimate) Brick work in CM 1:5 mix using country bricks ground moulded of size 22 x 11 x 7cm for the following including curing etc., complete complying with standard specifications.

Plastering with CM 1:5, 12mm thick.in all floors including curing etc., complete complying with standard specifications and as directed by the departmental officers.

Supplying and painting the walls with two coats of oil bound distemper over one coat of water based cement primer including cost for distemper, primer, cleaning and scrapping the walls, rendering the walls smooth with necessary putty, brushes, scaffolding arrangements, labour charges, etc., as per standard specification. (The colour and shade of the distemper shall be got approved by the Executive Engineer before use of work).

Providing cuddapah slab 38 to 40mm for shelfs etc., all complete

labour charges for fixing cuddapah slab 38 to 40mm for shelfs etc., all complete

Towards Cost of Name Board Charges

Provision for Photograpic charges

GST Amount for providing Service to Government Contract Works for the above Construction & Maintenance Works. { GST Amount is the Total GST Amount for overall quoted amount (Both Construction and Maintenance) above this row in column "BB" for all works in this package} (Refer Clause 13.2 & 13.3 of Section 2 of Instruction to Bidders (ITB) of SBD)

Karpaga Vinayagar Engineer Construction (BID ID -1255162)

chinnasamy M (BID ID -1255024)