Construction of Shed in front of GUPS Bhensroad school and Glass frame work on 1st floor in window,Bhenslore in dunetha G.G.Panchayat,Nani Daman.

Items :

Removing & Refitting of Paver Block including 50mm thick compacted bed of course sand, filling the joint with line sand and cement concreat vatta etc. all complete as per directore of consultant/Engineer in Charge.

Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401.

Providing and laying Cement Concrete 1:3:6 (1 Cement : 3 coarse sand : 6 hand broken stone aggregates 40 mm nomial size) and curing complete excluding cost of form work in (A) foundation and Plinth

Excavation of Foundation upto 1.5 m depth including sorting out and stacking of useful materials and disposing off the excavated stuff upto 50 Meter lead. -(C) Hard Murrum

Providing and laying controlled cement concrete M.200 and curing complete excluding the cost of formwork and reinforcement for reinforced concrete work in (D) COLUMNS, Pillars posts and struts upto floor two level.

Steel work, riveted in built up sections framed work including cutting, hoisting, fixing in position and applying a priming coat of red lead paint. (D) In trussses and trussed purlins, upto 25 M. span and 15 M ovarall height.

Providing and Fixing to the required line and slope roofing with UPVC Tile Sheet 2.5 MM, required colour. Fixed with self tapping screws with washer, over the existing purlin, rafter and trusses including cost of material labour complete ar per engineer in charge.

Providing profile ridges or hips have thickness 2.5 mm, with secure screws for ridge and hip caps to the roof deck or underlayment, Sealing tape for waterproof seal between the ridge cap and the roof surface and Caulk to fill any gaps and ensure a watertight seal. complete ar per engineer in charge.

Brick work using common burnt clay building bricks having crushing strength not less than 35 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:6 (1- Cement : 6 -fine sand)(A) Modular

Providing 15mm thick cement plaster in single coat on Rough (Similar)side of single or half brick walls for interior plastering upto floor two level and finished even and smooth in (i) Cement mortar 1:3 (1-cement:3-sand)

Providing & fixing panner of P.V.C half pipe of 110 mt including all fixture as per directed by Engineer in Charge. (MR)

Providing and fixing 18 mm thick machine cut, mirror / egg shell polished , Granite stone work of approved shape, size, color, design and pattern as per approved architect for wall lining (veneer work) including dado, skirting, risers of steps, door / window sill and four side windows , lift facade, ledges, etc., including edge moulding,rounding the edges etc. wherever required as per design & grooves and moulds truly in plumb in required design and pattern wherever required, stones of different finished surface texture, on 12 mm (average) thick cement mortar 1:3 (1 cement : 3 coarse sand) laid and jointed with white cement slurry @ 3.3 kg/sqm including pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing, polishing, removing any unevenness on the surface etc. all complete as per Architectural drawings, and as directed by the Engineer-in-Charge for all lift,all floor levels, all heights and leads. The item to include all materiral, fixing, scaffolding, labour, Wastage etc. complete in all respects. Required test shall be done as per relavent IS Code. Note: No extra payment pay for architectural Ornamental Design upto 10% of flooring area. Rate shall be inclusive of cutting of slab in any shape, at any level for service cutout.COMPLETE EIC

Providing and fixing window having extruded aluminum Colour anodized section frame main outer size 95mm x 24mm x 1.17mm (of Jindal Section no:2459 @ wt.of 0.738 Kg/mt), horizontal Three track member size 92mm x 31.75mm x 1.30mm (of Jindal Section no:8688,@ Wt.1.07 Kg/mt), vertical member of size 92mm x 31.75mm x 1.50mm (of Jindal Section no:8933,@ Wt. 1.06 Kg/mt) with sliding shutters of horizontal member size 40 mmx18mm x1.29mm (of Jindal Section no:8947@ wt.of 0.456 Kg/mt), vertical member of size 40mm x 18mm x 1.29 mm (of Jindal Section no:8949 @ wt.of 0.456Kg/mt/ with 5 mm thick transparent bronze colour tinted float glass with powder coated aluminum fittings and fixtures and aluminium loveres and transparent silicon sealant glass fixing to frame as per details etc (s.s mosquito net may be fixed as per directed)complete ar per engineer in charge.

PRADIMAL FAKIRBHAI PATEL (BID ID -9544)