80928 ADDITION ALTERATION AND RENOVATION OF CPLO CSOD AND SSO NBCD AT HQ ANC UNDER GE HADDO PORT BLAIR

Amount

Taking down chowkats or frames with shutter (without taking off shutters) exc 1.5 Sqm but n.exc 4 sqm each.

Taking down chowkats or frames not exc 1.5 sqm each with shutters (without taking off shutters from the frames).

Dismantling wrought iron, mild steel or aluminium work of any description not otherwise provided for all as specified

Material and labour for aluminium partition, window and door / ventilator with frame and shutters and grill fully or partly glazed, sliding / openable / fixed / fully glazed and panels fixed with panel inserts 12mm thick pre-laminated partical board/sheet glass including necessary jointing cleats, glazing, clips, rubber beading, neoprene packing, anodized aluminium snap beading, screws, anodized aluminium fitting such as handle, aluminium butt hinges, aluminium tower bolts, the size of aluminium section shall be all as specified in relevant IS Code and SSR Part-I complete as specified Note : (i) Supply only floors spring, glass, Imax hinges, SS friction Hinges, partical board, gauze will be measured separately. (ii) Weight of aluminium section only shall be accounted for payment purpose. However unit rate quoted shall be deemed to include for cost of rubber beading neoprene packing fittings such as handles, butt hinges, tower bolts, and fixing only of panel inserts of glass/partical board/gauge etc. (iii) Weight of aluminium handle, butt Hinges, tower bolts shall not be accounted for payment purpose.

Supply only ordinary sheet glass 4mm thick and glazing with aluminium glazing clips in square n. exc 0.5 sqm in each pane.

Supply only ordinary sheet glass 4mm thick and glazing with aluminium glazing clips in square exc 0.5 sqm in each pane.

Supply only ordinary sheet glass 6.3mm thick of black or any colour and type and glazing with aluminium glazing clips in square exc 0.5 sqm in each pane.

Supply only Prelaminated particle, board, exterior grade, prelmainated one side with decorative choice laminations & other side balancing white/blue or any colour of lamination of 12 mm thick, fixed with screws to timber or aluminium frame work. complete all as specified and as directed.

Supply only Prelaminated particle, board, exterior grade, prelmainated both sides with decorative choice laminations and white/blue or any colour lamination of 12 mm thick, fixed with screws to timber or aluminium frame work. complete all as specified and as directed.

Supply and fix aluminium composite panel sheet of 3.0mm thick with skin thickness of 0.25 mm of aluminum on both sides, sandwiched by 2.5 mm polythelene core with PVDF coating of 30.0 micron fixed over frame of aluminium tubular section 25 x 50 mm, 2.0 mm thick, duly fixed to wall/ceiling/External wall/covering cable tray etc. with expansion fastener, having panels not exc 1200 x1200 mm with necessary silicon fitting, in approved pattern as in column, beam, wall etc. complete all as specified and as directed. Note :-Necessary MS Scalfolding required for work shall be deemed to be included in the quoted rate.

Dismantling of wall and ceiling boards (fiber, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets

Material and labour fixed in repairs for seamless gypsum board false ceiling 12mm thick including for any sunk or raised moulding with 25mm long self drilling/tapping screws having Philips head with joining compound and 48 mm wide fiber tape to provide seam less finish and including GI framework of seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flange of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm c/c intermediate channel 0.9mm thick having two equal flanges of 15mm suspended from soffit at apprx 900mm c/c with GI cleats and steel expansion fasteners with and incl ceiling section (not exc 1.2m length) of 0.55mm thick having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting across the intermediate channel at 457mm c/c include hangers 6mm dia GI adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60mm long & expansion hold fasteners 12.5mm dia 40mm long complete and finally applying two coats of Oil Bound distemper with roller finish over a coat of primer.

Material and labour for anodised aluminium snap grid frame work for false ceiling 605mm x 605mm using aluminium anodised sections as specified in SSR Part-I-2009 including cutting, drilling, jointing etc complete including provision of 6mm dia GI hangers wire suspenders fixed with adjustable connectors and providing 4mm thick E-Boards (Classic) 605mm x 605mm size duly applied with two coats of oil bound distemper over a coat of primer all as specified.

Taking down cement plaster on brick or stone, concrete walls/Ceiling etc including raking out joints, hacking for key, scrubbing down with water etc.

Material and labour rendering 10mm thick of fair faces of brick work or concrete wall surfaces in cement plaster 1:4 finished even and fair without using extra cement.

Material and labour for preparation of new plaster surface of wall and applying two coats of oil emulsion distemper over a coat of primer and putty 3mm thick all as specified and as directed by Engineer-in-Charge.

Complete removal of existing treatment on old surface of wall and and applying two coats of oil emulsion distemper over a coat of primer and application of 3mm putty complete all as specified.

Complete removal of existing treatment on old surface of ceiling and applying two coats of oil emulsion distemper over a coat of primer complete all as specified.

Complete removal of existing treatment on old plastered surfaces of walls and applying two coats of anti-fungal exterior acrylic emulsion paint over a coat ofanti fungal primer complete all as specified

Supply and fix for black film 10 micron fixed on glass in any position complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises

Material and labour for Vitrified Ceramic tiles 10 mm thick (Square/rectangular) polished area of each tile each tile not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:4 complete.

Material and labour for Coloured Vitrified Ceramic tiles 10 mm thick (Square/rectangular) polished area of each tile not exceeding 0.36 sqm as in dado/wall/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including10mm thick rendering in CM 1:4 complete.

Dismantling of boarding, any description, fixed in any position with nails

Material and labour for boarding with 19mm thick Plywood, grade BWR, type BB, fixed with screws on flat iron/timber frame work support including applying two coats of synthetic enamel paint over a coat of pink Primer.

Material and labour for 18-20 mm thick superior quality chemically pressure treated, edge glued, finger jointed/rubber wood boarding panels/beams tongued grooved fixed over rubber wood frame work with rubber wood runner of size 50mmx30mm fixed at 600mm centre by secred nailing with brass screws duly fixed with walls including provision of designed rubber wood beading to top termination of wood boarding and finished with two coat of melamine polish with asian sealer and wood filler over a coat of honey/natural colour wood filler putty for dust free surface etc. including preparation and applying three types of sand paper and surface finish to a glossy/mat finish to match with the adjoining surface complete all as specified and directed. MAKE of rubber wood members : RUBCO/India wood or equivalent

Supply and fix door closer hydraulically regulated, designation No 3, universal type, Aluminium (Diecast) body suitable for door shutters of 851 to 1000 mm in width and fixed all as directed and approved by Engr-in-charge

Supply and fix aluminium alloy, anodised, sliding door bolt 300mm size with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast alumimnium alloy and fixed.

Supply only aluminium expanded metal fly proof mesh cut to size 0.45mm nominal dia of wire and average width of aperture 1.40 mm and fixed with staple complete.

Supply and fix for mild steel PVC coated 20mm dia curtain rods with brackets end the post any colour fancy type complete all as directed and approved by Engr-in-charge

Material & labour point wiring complete with 1100 volts grade, 1.5 sq.mm (nominal area), single core, FRLS PVC insulated, unsheathed, multi stranded copper conductor cable drawn through and including medium grade, rigid , non-metallic PVC conduit of size not less than 20mm dia, with all necessary fittings, concealed in walls/roof/floor duly earthed with one run of single core cable of same size but green in colour as continuous earthing wire and connecting to common earth dolly including suitable size of factory made fabricated MS sheet modular terminal box, flush mounting in the wall for mounting switches/switch socket combinations/ fan regulators etc., covered with suitable size of modular cover plates complete all as specified for the following :- Make : Polycab/Havells/Finolex/Gloster/Anchor

One light/fan point controlled by one modular switch 5 Amps one way.

One modular 3 pin 5 Amp socket out let on independent board.

One modular 3 pin 5 Amps switch socket on same Board

One bell point controlled by one modular bell push switch 5 Amps one way.

All as per item No.31 above but point wiring with 4.0 sqmm PVC FRLS insulated multistranded copper conductor suitable for one 3 pin 15 Amps socket out let and one run of 4.0 sqmm cable for earth in green colour on independent board for geyser.

Supply and fix modular switch 6/10 Amp one way 230 V AC Make : ROMA(Anchor)/Havells (Crabtree)/Legrand

Supply and fix modular socket outlet 6/10 Amp intel multi socket for all pins 230 V AC. Make : ROMA(Anchor)/Havells (Crabtree)/Legrand

Supply and fix modular socket outlet 16/20 Amp socket heavy duty 230 V AC Make : ROMA(Anchor)/Havells (Crabtree)/Legrand

Supply and fix modular switch 16/20 Amp one way 230 V AC Make : ROMA(Anchor)/Havells (Crabtree)/Legrand

Supply and fix modular bell push 5Amps flush type 230v, 50Hz AC. Make : ROMA(Anchor)/Havells (Crabtree)/Legrand

Supply and fix Ceiling rose PVC polycarbonate, isolated body 3 terminals 230 V complete.

Supply and fix, Electric Bell, Ding dong type working on 230 volts AC supply complete all as directed. Make: Anchor/Kinjal/Standard

Supply and fix wall mounting fan 65% Electricity saving, 400 mm sweep, 30 watts, 1330 RPM, Air velocity 76 CMM (m3/min) complete with including electric connection complete all as per directed by Engineer - in - charge. Make: Gorilla, /Havells/Usha/ Orient/CG

Supply and fix of decorative ultra slim linear LED lighting fixture of 18 Watt recess mounted 220V, 50Hz with extruded Polycarbonate, Aluminium haet Sink ,environmental friendly energy efficient fitting surface mounted round in shape complete all as specified and directed. Make - CG cat No. LSCRM-18W-WW/Philips Model No Astra Max Metal panel/Havels

Supply and fix AC starter switch of capacity 25 Amps working on 240 volts AC supply suitble for air conditioner Make : Crabtree Model No : ACAO252504

Material and labour for sub main wiring with FR PVC insulated, 1100 volts grade single core multistranded copper conductor cable conforming to IS specifications with 2 runs of 6 sqmm & one run of 6.0 sq.mm single core multistranded copper conductor FR PVC insulated cable as earth continuity conductor drawn through & including PVC conduit /PVC casing & caping of size not less than 20 mm dia. size and conduit accessories concealed/surface PVC casing & caping in wall connecting to common earth dolly all as specified and directed. Make : Polycab/Havells/Finolex/Gloster/Anchor

Material and labour for sub main wiring with FR PVC insulated, 1100 volts grade single core multistranded copper conductor cable conforming to IS specifications with 2 runs of 4 sqmm & one run of 4.0 sq.mm single core multistranded copper conductor FR PVC insulated cable as earth continuity conductor drawn through & including PVC conduit /PVC casing & caping of size not less than 20 mm dia. size and conduit accessories concealed/surface PVC casing & caping in wall connecting to common earth dolly all as specified and directed. Make : Polycab/Havells/Finolex/Gloster/Anchor Note: for item No 43 & 44 :- (i)Three runs of cable and one run of conduit with necessary accessories will be measured as one unit length. (ii) The wiring shall be done in proper colour coding using red, yellow or blue for phase, black for neutral and green for earth leads. Make : Polycab/Havells/Finolex/Gloster/Anchor

Supply and fix single pole and neutral sheet steel powder coated Distribution board for MCBs fitted with 200 Amps rated bus bar, Neutral link, Earth Bar and Din rail suitable for use on 240 V, 50 Hz supply double door SP&N DB system 08 ways. Make : Indo Asian /Havells/L&T/Legrand

Supply and fix MCB SPN, 63 amps, 10 KA , 230 volts , all as directed. Make : Indo Asian /Havells/L&T/Legrand

Supply and fix MCB SP, 6-32 amps, 10 KA, 240 volts, Make : Indo Asian /Havells/L&T/Legrand

Earthing complete with galvanised earth plate electrode 60 cm x 60cmx 6.15 mm thick, buried directly in ground vertically (earth pit not less than 2.25 m deep below ground level) with top edge of the earth plate not less than 1.5m below ground level, connected to GI earth wire 4 MM Dia as earthling lead by means bolts and nuts check nuts and washers of galvanized iron and connected to main switch board including watering arrangement with PCC chamber, MS funnel with wire mesh. CI cover with frame etc including necessary excavation in any type of strata, returning, filling removal of soil outside MD land, filling of charcoal and salt complete all as shown in electrical plate No. 3 of MES Sch Part I, connected to Earthing test point all as specified and directed on testing on completion.

Supply and install hi wall splits indoor/outdoor complete with cordless remote control unit and with in built air ioniser and plasma filter for better indoor air quality with minimum 4 star rating and EER 3.2 of capacity 2.0 TR including 3 mtr copper suction and discharge pipe line complete with proper insulation all as specified. Note : All connected pipes must be covered by insulation material. The drain out water pipe connection should be connected up to ground level Make : LG/Whirl Pool/ Hitachi/ Bluestar.

Supply and install hi wall splits indoor/outdoor complete with cordless remote control unit and with in built air ioniser and plasma filter for better indoor air quality with minimum 5 star rating and EER 3.2 of capacity 1.5 TR including 3 mtr copper suction and discharge pipe line complete with proper insulation all as specified. Note : All connected pipes must be covered by insulation material. The drain out water pipe connection should be connected up to ground level Make : LG/Whirl Pool/ Hitachi/ Bluestar.

Supply and fix Voltage stabilizer copper wound 4.0 KVA suitable for wall mounting (Automatic operation) single phase naturally cooled suitable for input voltage 165 V to 295 V stabilizer output voltage 200 to 240 volts with time delay 2 to 4 minutes for Air conditioners. Make : V-Guard/ Premier)

DISHA ENTERPRISES

CHANDER SEKER ENTERPRISE

SUBASH FURNITURE SHOP

Sree Tirumala Enterprises

kakolil trade agencies