CERTAIN MISC EM WORKS FOR EM INSTALLATIONS AT SECTOR C D UNDER AGE EM I OF GE 865 EWS

Amount

Supply and fixing in replacement Air circulator made of sturdy Engineering plastic complete with louvers, shutter, voltage 230 volt, 50 Htz RPM 1200, copper winding of sweep 300mm complete all as specified and directed

Supply and fixing in replacement Air circulator made of sturdy Engineering plastic complete with louvers, shutter, voltage 230 volt, 50 Htz RPM 1200, copper winding of sweep 250mm complete all as specified and directed

Taking down carefully copper/aluminium point wiring (light, fan, socket and power point) complete fittings such as switches, ceiling rose, regulators, socket etc and removing material from site and making good disturbed surfaces of walls, floors/ceiling to match the existing surface all as spfd and directed

Point wiring complete with 1.5Sq.mm nominal area of copper conductor multi stranded PVC insulated and unsheathed 1100 volts cable drawn through & including PVC Casing & caping with standard accessories such as elbows, tees, junctions etc. and PVC moulded terminal box with top cover of including PVC insulated unsheathed solid 1.5Sqmm copper conductor cable as continuous earth lead all as specified and directed for the followings:-

One light/exhaust fan point controlled by one way switch complete all as directed

One switch socket outlet 6 Amps, 230 volts point on Same board complete all as directed

One switch socket outlet 6 Amps, 230 volts point on independent board complete all as directed by Engr-in-charge.

All as item No 4 above, but using cables 4 Sq mm size complete all as directed .

Supply and replacement of lamp holder insulated body with back plate complete all as directed

Supply and replacement of Switch piano flush button single pole 6 Amps 230 volts one way complete all as directed.

Supply and replacement of switch Socket combination out let 5 pin 6 Amps flush type.230 volts complete all as directed

Supply and replacement of switch Socket combination out let multi purpose 5 pin 6 Amps and 16Amps 230 volts complete all as directed .

Supply and replacement of Ceiling rose, surface Bakelite three terminals complete all as directed

Supply and fix in replacement of sheet metal enclosure for DBs double door when MCB's to be used single pole & neutral 240 Volts 4 Ways 200 Amp rated bush bar complete all as specified and directed .

Supply and fix in replacement of sheet metal enclosure for DBs double door when MCB's to be used single pole & neutral 240 Volts 8 Ways 200 Amp rated bush bar complete all as specified and directed .

Supply and fix in replacement of MCB SPN 63 Amp 240 Volts 10 KA C-Curve AC ISI marked complete all as specified and directed.

Supply and fix in replacement of MCB SPN 40 Amp 240 Volts 10 KA C-Curve AC ISI marked complete all as specified and directed.

Supply and fix in replacement of MCB SP 6-32 Amps. 240 Volts 50 HZ 10 KA C-Curve complete all as directed.

Supply and Fix in replacement LED light fitting 1x20 wattt, 220 volt AC, decorative box type with driver, holder incl LED tube light suitable for roof ceiling including conneting up with, three core flexible copper coductor cable of suitable size complete all as specified and directed

Supply and fixing inverter LED Bulb B-22 Cap with Opal diffuser , IP 20 capacity 10watt and in built battery backup of 3-4 hrs. Complete all as specified and directed

S&F inverter LED Security light luminaires 30 W pressure die cast Aluminium housing toughened heat resistemt glass , IP 66 portection better optics for uniform distribution with multiple LEDs having optical grade poly carbonate lens with 4 hours battery back up all accessories internally pre wired and including connecting up with two core 1.5 Sq mm copper conductor cable from connector to, ceiling rose to connetion of light including disconnecting and taking down old unserviceable security light fitting of any discription and any position complete all as specified and directed

S&F in replacement of recess/ surface mounted LED flate panel 2' x2' CRCA powder coated 36 W IP 20 with 4 hours battery back up with provision of 2/3 core PVC Copper conductor cable 1.5 Sq mm size to light fiitting including disconnecting and taking down old existing light fitting of any discription and in any position complete all as specified and directed

Supply and Fix in replacement of inverter LED tube light fitting 1x20 wattt,with minimum 4 hours battery back up intigrated automated battery with diffuser and including 20 W LED high efficient AC 220 -240 volt,50 Hz including conneting up with, three core flexible copper coductor cable of suitable size complete all as specified and directed

Supply and Fix inverter LED bulk head 10 W ,with minimum 4 hours battery back up intigrated automated battery with diffuser and including high efficient AC 220 -240 volt,50 Hz including conneting up with, three core flexible copper coductor cable of suitable size complete all as specified and directed .

M&L for Earthing complete with galvanized steel earth plate electrode 600mm x600mmx 6mm thick buried directly in ground. (earth pit not less than 2.25m deep below ground level) with top edge of plate not less than 1.5m below normal ground level, connected to galvanized earth lead wire 4mm dia by GI watering pipe with funnel and wire mesh and 15mm dia protection pipe earth work etc complete all as shown in electrical plate No 5 of SSR Part-I complete all as specified. and directed

M & L for submain wiring alongwith earth wire FR PVC insulated copper conductor, single core cable in surface/recessed as required in PVC casing Caping wire size 2x4.0 sq. mm + 1x2.5 sq. mm earth wire complete all as directed .

M & L for submain wiring alongwith earth wire with FR PVC insulated copper conductor, single core cable in surface/recessed as required in PVC casing Caping wire size 2x6.0 sq. mm + 1x4.0 sq. mm earth wirecomplete all as directed .

Supply and fix in replacement of sheet metal enclosure with 20 Amp 240 V socket plug top and MCBs single pole and neutral enclousre with two pin and earth plug and socket with one single pole 20 Amp MCB complete all as specified and directed .

Supply and fix in replacement of 1100 V grade heavy duty cable PVC insulated aluminium conductor served with inner sheathing of PVC tape and over all in service connection suspended by insulating hangers not less than 1 mtr apart including 4 mm suspension wire one twin core cable flat of stranded multistranded conductor size 10 sq mm, 2 core complete all as directed

All as per item No 26 above but of size 16 Sq mm, 2 core stranded aluminium conductor cable complete all as directed .

Supply and laying in replacement of XLPE insulated, armoured, haeavy duty electric cables (heavy duty) with stranded aluminium conductor rating 1100 volts grade of size 25 Sqmm 4 core laid in trences or passing through pipes.ducts or fixed to walls/poles completer all as specified. (Earth work, cable protection and sand cushioning shall be measured and paid for seperately)

Supply and laying in replacement of XLPE insulated, armoured, haeavy duty electric cables (heavy duty) with stranded aluminium conductor rating 1100 volts grade of size 35 Sqmm 3.5 core laid in trences or passing through pipes.ducts or fixed to walls/poles completer all as specified. (Earth work, cable protection and sand cushioning shall be measured and paid for seperately)

Supply and laying in replacement of XLPE insulated, armoured, haeavy duty electric cables (heavy duty) with stranded aluminium conductor rating 1100 volts grade of size 50 Sqmm 3.5 core laid in trences or passing through pipes.ducts or fixed to walls/poles completer all as specified. (Earth work, cable protection and sand cushioning shall be measured and paid for seperately)

M&L for Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for laying UG cable in trenches on plan and n exc 1.5 m in depth in any type of soil and getting out all as specified and directed .

M&L for Returning, filling in (soil), including spreading, leveling, watering and well ramming in layers not exc. 25m, complete all as directed .

M&L for Removing excavated material to a distance not exc. 50m and depositing where directed at a level not exc. 1.5m above the strating point, complete all as directed.

M&L for Sand cushioning to underground cables 8 cm below the cable before laying & 15 cm above the cable after laying, complete all as specified in clause 19.75 of SSR Par-I, complete all as specified. Note : Punned thickness of 18 CM will be measured and paid.

Supply and laying of factory made, machine pressed, unreinforced, pre-cast concrete cable cover class LV type-1 flate size 250 mm x 150 mm x 40mm , complete all as specified and directed

S&F in replacement GI Bracket made out of 40mm dia medium grade pipe 1.2m length to bend to shape 120 degrees for fixing on pole/wall and suitable for 65 Watt strret light with 02 Nos clamps of flat iron (40 x4mm) nuts, bolts and washers including painting with two coats of aluminim paint over a coat of primer complete all as specified and directed.

Supply, fixing, connecting and testing in replacement JETA COMPACT Energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium flood light with high power LEDs as light source, 70 Watt, 230 Volt AC out door type with thermal management in multiple optics and equiped with IP66 protection with impact and corrosion resistance complete all as specified and directed.

Supply, fixing, connecting and testing in replacement JETA COMPACT Energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium flood light with high power LEDs as light source, 100 Watt 230 Volt AC out door type with thermal management in multiple optics and equiped with IP66 protection with impact and corrosion resistance complete all as specified and directed.

Supply, fixing, connecting and testing in replacement ENDURA PEARL NEO 60 Watt New generation energy saving and environmental friendly long life LED street light 60 watt made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having TOP Opening seperate driver compartment with IP66 protection and impact resistance of IK07. complete all as specified and directed.

Supply and fix in replacement of sheet metal enclosure for DBs double door when MCB's to be used Three pole & neutral 415 Volts 4 Ways with 200 Amp rated bush bar all as specified and directed

Supply and fix in replacement of MCB TPN 40-100 Amp 415 Volts 10 KA B-Curve AC ISI marked all as specified and directed

Supply and lay Stone boulder or Gravels as per existing size for prevention of Fire hazard in the installation complete all as directed

Materials and labour in replacement for cross arms, bracings supports clamps and back plates fabricated from structural steel section including nuts bolts, washers welding, bending cold or hot, drilling holes for bolts in any shape or size as indicated or directed and inclusive of two quotes of aluminium paint over a coat of red oxide zinc chrome primer complete all as specified and directed

S & F in replacement GI tubing 80 mm bore medium grade with all fittings and laid in floors or trenches all as specified and directed.

S & F in replacement GI tubing 50 mm bore medium grade with all fittings and laid in floors or trenches all as specified and directed.

S & F in replacement GI tubing 25 mm bore medium grade with all fittings and laid in floors or trenches all as specified and directed.

Supply and fixing in replacement gun metal gate valve ISI marked cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union and fixed complete all as specified for the size 50 mm dia bore.

Supply and fixing in replacement gun metal gate valve ISI marked cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union and fixed complete all as specified for the size 40 mm dia bore.

Supply and fixing in replacement gun metal gate valve ISI marked cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union and fixed complete all as specified for the size 25 mm dia bore.

S & F in replacement of PP-R pipes PN 20/ SDR 11, 3 layer 50 mm dia bore with all fittings conforming to IS- 15801 and fixed complete to walls and ceiling or laid in floors or trenches all as spd and directed.

All as per item No. 50 above but 40 mm dia bore. Complete all as specified and directed.

S & F in replacement gate valve conforming to ISO 9001- 2000 conforming ISO- 15801 screwed down high pressure with crutch or butterfly handle screwed both ends for PP-R pipes or for union and fixed completely as spd for the size 32 mm dia bore. Complete all as specified & directed.

S & F in replacement gate valve conforming to ISO 9001- 2000 conforming ISO- 15801 screwed down high pressure with crutch or butterfly handle screwed both ends for PP-R pipes or for union and fixed completely as spd for the size 25 mm dia bore. Complete all as specified & directed.

S & F in replacement gate valve conforming to ISO 9001- 2000 conforming ISO- 15801 screwed down high pressure with crutch or butterfly handle screwed both ends for PP-R pipes or for union and fixed completely as spd for the size 20 mm dia bore. Complete all as specified & directed.

S & F in replacement gate valve conforming to ISO 9001- 2000 conforming ISO- 15801 screwed down high pressure with crutch or butterfly handle screwed both ends for PP-R pipes or for union and fixed completely as spd for the size 50 mm dia bore. Complete all as specified & directed.

S & F in replacement gun gate valve conforming to ISO 9001- 2000 conforming ISO- 15801 screwed down high pressure with crutch or butterfly handle screwed both ends for PP-R pipes or for union and fixed completely as spd for the size 40 mm dia bore. Complete all as specified & directed.

S&F Danger notice plate of 1.6mm thick mild steel sheet, vitreous enameled white, with letters, figures and conventional skull and bones in signal red colour and fixed with M.S. clamps, bolts and nuts of approved size, for HT, 25x20cm size complete all as specified and directed

Supply and fix in replacement cast iron sluice valve for water supply purpose with CI drilled flanged ends (internal cast 150 mm bore class PN 1.6 conforming to IS 780 marked) with stainless steel spindle and iron wheel incl jointing material compete such as rubber packing rings of adequate size and requisite number of nuts, bolts and washers complete all as specified.

All as per item No. 58 above but of size 100 mm dia bore.

All as per item No. 58 above but of size 80 mm dia bore.

Schedule of Credit

ABID CONSTRUCTION COMPANY (BID ID -3139675)

M/S GEE AAR and SONS ENTERPRISES (BID ID -3139993)

BETONG BUILDERS (BID ID -3140045)