REPAIR/MAINT OF PIPE LINE AND CERTAIN CONNECTED WORKS IN AGV AREA AT AFS KANPUR

Amount

Taking up/down 15mm bore steel tubing and its connection by execution in trench and building up to any stories with due care including removal from site complete all as directed by Engineer in Charge.

All as per item no. 1 here in before but size 20mm bore

All as per item no. 1 here in before but size 25mm bore

All as per item no. 1 here in before but size 32mm bore

All as per item no. 1 here in before but size 50mm bore

All as per item no. 1 here in before but size 80mm bore

M&L for attending the day to day complaint of minor nature of work including minro fittings such as elbw, sockets, Tee etc. and depositing the complaint slip in complaint cell after completion of complaints duly signed by the users complete all as directed by Engineer in Charge.

S&F in replacement of float valve (ball valves) high pressure of PTMT with epoxy coated alumnium rod & high density plastic ball, ISI marked suitable for the 25mm bore pipe complete all as specified & directed by Engineer in Charge

S&F in replacment of Gun Metal Gate Valve , ISI Marked with iron wheel, head screwed both ends for GI pipe suitable to size 25mm bore of approved make complete all as specified and directed by Engineer in Charge.

All as per item no. 9 here in before but suitable for 32 mm bore

All as per item no. 9 here in before but suitable for 50 mm bore

M&L for 15mm bore GI pipe medium grade, ISI Marked with and including its fittings laid in trenches / floor/ wall or ceiling complete all as specified and directed by Engineer in Charge.

All as per item No.12 here-in-before but 20mm bore.

All as per item No.12 here-in-before but 25mm bore.

All as per item No.12 here-in-before but 32mm bore.

All as per item No.12 here-in-before but 50mm bore.

All as per item No.12 here-in-before but 80mm bore.

M&L in replacement of cast iron detachable joints ( D joint), suitable for CI pipe line 150 mm dia complete with full threaded 12mm dia nut bolts and washers including two numbers rubber rings complete all as specified & directed by Engineer in Charge.

S&F in replacment of Sluice Valve 200mm dia, class PN-1.0, IS:14846, with flenged ends, stainless steel spindal and iron wheel including nut bolts and rubber packing, of approved make complete all as specified and directed by Engineer in Charge.

All as per item No.19 here-in-before but 200mm bore.

S&F in replacement of butter fly valve of size 100mm bore ISI marked heavy duty including suitable nut, bolts and washers complete all as specifed and directed by Engineer in Charge.

All as per item No.21 here-in-before but 150mm bore.

All as per item No.21 here-in-before but 200mm bore.

M&L for centrifugally cast (Spun) ductile Iron Pipe 150 mm bore for water supply with spigote & sockted ends confirming to IS:8329/2000 in any length for classification of K7 suitable for rubber gasket push on with cement mortar linning inside the pipe with out side zikn coating as per IS:8329/2000 complete all as specified and directed by Engineer in Charge.

M&L in replacement of rubber gasket push on joint suitable for 150 mm dia spigot & socketed ductile iron pipe & fittings complete all as specified & directed by Engineer in Charge.

Supply & fix flate water proof submersible cable 3 core copper conductor, PVC insulated , 1100 volt grade stranded 2.5 sqmm , ISI marked and connected to submersible pump complete all as specified and directed by Engineer in Charge.

Demolition of brick work masonry built in cement mortar complete all as directed by Engineer in Charge

Demolition of PCC (unreinforced) of any description and in any position not otherwise specifically provided for complete all as directed by Engineer in Charge,

M&L for PCC (1:2:4) type B1 using 20mm graded stone aggregate as in window cills, lintel, bessumers, steps, quoin block (for use with masonry), string course, coping, kneelers, apex stone, piers caps, column, post, boundary pillars all as directed by Engineer in Charge

M&L for Cast iron fittings such as bens, tapers to pieces (Single or double) branch pieces any type , strainght, connecting piece, socket, coller, caps, plugs, flange/ spigot with nut, bolts and washers suitable for 80mm to 250mm dia complete all as directed by Engineer in Charge.

M&L for ductile Iron Fittings up to 250mm bore such as bends (any type, radius and angle) tapers of any type (straight bends, decreasing, increasing , flanged or double socketed etc) tall pieces, Tee, sigle branches, Y junction, double branch, cross collar, caps, plugs etc. including push on joints (Tyton) complete all as directed by Engineer in Charge.

S&F in replacement of CI Non Return valve , ISI Marked , 200mm dia including nut bolts, washer and rubber packing complete all as directed by Engineer in Charge.

All as per item no. 32 here in before but for suitable 150mm dia

S&F in replacement of 70W LED, energy saving, envoirement frindly, long life exlusively innovating dia cast alumnium ,IP-66 protection, flood light suitable for high way lighting and general purpose including fixing arrangement and fixed on over head tanks's pillars / Pump House complete all as specified & directed by Engineer in charge

S&F in replacement of new generation IP-65, Post Top energy saving, envirnment frindly , long life, aesthetically designed wih symmetrical light distribution spun alunium land scape lumniare with high power LEDs as light source including fixing arrangement complete all as specifed & directed by Engineer in Charge

S&F in replacement of LED Aviation light with all necessary fixing arrangements all as directed by Engineer in Charge

Supply laying & testing in replacement of MS ERW black pipes of 250mm bore of class B (as per IS:3589 & 1239) for wet riser system. The pipes shall be laidd in trenches or fixed on wall or suspended from ceiling, beams, RCC roof slab vertical / horigentally or in any position or to be use in common headers of delevery line of pump with necessary specials, such as bends, reducers, orific plate, if any Tee, flanges, tapers etc at any required length complete all as specifed and as directed. Note: Unit rate shall include cost of consumeable for cutting and welding , painting with two coat of synthetic enamel paint over a coat of red oxide primer of approved copour complete all as specifed & directed by Engineer in Charge.

All as per item no. 37 but of size 200mm bore

All as per item no. 37 but of size 150mm bore

All as per item no. 37 but of size 100mm bore

M&L for mild steel flanges welded to MS tubes of any description including necessary nut, bolts and washers, rubber gasket complete suitable for up to 150mm dia flange all as specified and directed by Engineer in Charge

All as per item no. 41 but of size 100mm bore

Supply and fix in replacement of phase cum protection system 415/440 volt, 50Hz, internal working voltage 12/24 volt , suitable for 100 HP capacity with MNX-95 Contactor in it for auto change of phase sequence if incomming phase sequences changes, single phasing prevention system and adjustable low and high voltage proteection system to protect the machnary, mounting on brackets maade out of 40x40x3mm angle iron frame, all control wiring, cable connections as directed by Engineer in Charge.

M&L for construction of Valve chamber of size 950x950x950mm internal size, covered with and including 6mm thick MS Plate welded with 02 Nos handle for lifting of cover and hinged with angle iron (40x40x6mm) frame of size 1200x1200 overall size complete with and including necessary earth work in soft /loose soil, PCC (1:5:10) type E2 as in fdn, one brick thick Brick work in CM (1:6) , 15mm thick rendering to exposed surface of valve pit and angle iron frame shall be fixed with and including PCC (1:2:4) type B1 using 20mm graded stone aggregate and all steel surface shall be provided two coat of synthetic enale paint over a coat of red oxide primer complete including dismatling of existing old valve pit all as specified and directed by Engineer in Charge.

M&L for construction of Valve chamber of size 650x650x650mm internal size, covered with and including 6mm thick MS Plate welded with 02 Nos handle for lifting of cover and hinged with angle iron (40x40x6mm) frame of size 900x900 overall size complete with and including necessary earth work in soft /loose soil, PCC (1:5:10) type E2 as in fdn, one brick thick Brick work in CM (1:6) , 15mm thick rendering to exposed surface of valve pit and angle iron frame shall be fixed with and including PCC (1:2:4) type B1 using 20mm graded stone aggregate and all steel surface shall be provided two coat of synthetic enale paint over a coat of red oxide primer complete including dismatling of existing old valve pit all as specified and directed by Engineer in Charge.

Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth and getting out for taking out /laying of pipes in soft/loose soil complete all as directed by Engineer in Charge.

Returning filling in and including spreading , levelling , watering and well ramming in layers not exceeding 25 cm thick in soft/loose soil after pipes are laid complete all as directed by Engineer in Charge.

Removal of excavated soil / materials not exceeding 50 mtr distance and deposited where directed at a level not exceeding 1.5mtr above from the starting points complete all as directed by Engineer in Charge.

M/S PASHUPATI TRADERS

YS CONSTRUCTION