05 NOS WORK SYSTEM STRENGHTHENING REPLACEMENT OF POLE AND BARE CONDUCTOR TO ABC UNDER EUDD VII NOIDA

Amount

WORK OF REPLACEMENT OF DAMAGED S.T. POLE ERECTED IN VARIOUS H.T./L.T. LINE AS PER FOLLOWING :-

Removal of ACSR conductor from both side spans of damaged pole and removal of H.T/L.T. line accessories from damaged pole.

Digging of pit of damaged pole in Pakka road (Hard soil) with the help of road cutter/digging machine, Tractor etc. for dismantling the pole.

Dismantling of damaged S.T Pole of size 13 mtr. / 11 mtr. (Metable scrap) from pit and S.T Pole carriage from work site to J.E's store including loading & unloading at both ends.

Carriage of S.T. pole 13 Mtr. - SP - 55 from Cetral Store, Shaibabad/Sector 20, Noida/J.E Store to work site including safe loading and unloading at both ends.

Cartage of line material such as 11 KV Pin Insulator (160 Nos.), 11 KV Pin with nuts (160 Nos.) etc. from ESC Noida/Sahibabad/ Ghaziabad /Any other ESC of Meerut Discom to JE Store and from JE store to various site of work including loading and unloading at both ends.

Erection & fabrication of S.T. pole 13 Mtr. - SP - 55 including fitting of all reqired accessories of HT/LT line as per RESPO schedule.

Grouting, concreting (0.880 Cu.m.each) and plinthing of single support on ST pole with cement, stone ballast & coarse sand in ration of 1:3:6 complete in all respect.

Re-laying and resagging of ACSR conductor in both side spans of erected pole in H.T/L.T line.

Providing of M.S. earthing rod of size 20x2500 mm & 6 SWG G.I earthing wire etc.

Excavation of earth and driving of M.S. earthing rod of size 20x2500 mm in earth and jointing through G.I wire of 6 SWG between support and earth electrode by providing proper size of bolts and nuts etc. as per RESPO schedule Complete in all respects.

Providing and fixing of Clamps for ST pole with nut & bolts

WORK OF REPLACEMENT OF LT BARE CONDUCTOR TO LT ABC IN VARIOUS PLACES AS PER FOLLOWING :-

Cartage of LT ABC of size 3x120+1x95+1x16 Sq.mm. from ESC Noida/Sahibabad/ Ghaziabad /Any other ESC of Meerut Discom to JE Store and from JE store to site of work including loading and unloading at both ends.

Dismantling & Carriage of old & damaged conductor from work site to JE store / central store & proper stacking with loading & unloading.

Laying, Lifting and final Binding, Sagging of LT ABC of size 3x120+1x95+1x16 Sq.mm. including fixing of all accessories as per RESPO schedule Complete in all respects.

PROVIDING & FIXING OF FOLLOWING ITEM AS PER REQUIREMENT COMPLETE IN ALL RESPECTS (MATERIAL SUPPLY FROM THE PVVNL APPROVED VENDORS AS PER GTP APPROVED) :-

LT Distribution Box Three Phase.

I Hook clamps and dead end clamps for ABC support.

Al. Lug long barrel off size.

LT piercing connector for size 120.

Clamp with Bolts & nuts for distribution box.

LT Lead 1x120 Sq.mm.

Vivek Electricals