Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹20.3 LAccepted-AOC | L1 | Accepted-AOC AOC | |
| 2 | L2₹21.3 L+₹62,537.30 (3.03%)Rejected-Finance | L2 | Rejected-Finance Not L1 | |
| 3 | L3₹21.7 L+₹1.1 L (5.12%)Rejected-Finance | L3 | Rejected-Finance Not L1 | |
| 4 | L4₹22.9 L+₹2.2 L (10.7%)Rejected-Finance NO 49 MSN NILAYAM 3RD CROSS HILL VIEW GARDEN TUNAHALLI SUBRAMANYAPURA POST BANGALORE 560061 | BANGALORE | BANGALORE | KARNATAKA | 560061 | L4 | Rejected-Finance Not L1 |
Tender Value
Refer Docs
EMD Value
₹40,000
Closing Date
24 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE(South) Bangalore
GE(South) Bangalore
PERIODICAL SERVICES AND COMPREHENSIVE MAINTENANCE AT DAD RESIDENTIAL ACCN UNDER GE(SOUTH) BANGALORE.
2022_MES_556439_2
8632/E8
Open Tender
Civil Works
Item Rate
180 days
Bangalore
As per tender document
6 documents required · 6 mandatory
₹500
GE(South) Bangalore
₹40,000
Yes
30 Nov 2022
9 Nov 2022
26 Nov 2022
9 Nov 2022
24 Nov 2022
10 Nov 2022
Amount
Dismantling floor hearth/ stone slabs/mosaic tile flooring or wall tiling including cement mortar bedding (but not backing) and rubbish off the same out side the MD land complete all as specified and as directed.
S&F non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including a screed of 15mm thick in CM 1:6 etc complete all as specified and as directed..
S&F coloured glazed ceramic tile in verticle surface 300*200 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over including 10 mm thick CM 1:4 backing coat complete all as specified and as directed.
Dismantling of old water proofing treatment and roof tiling including screed bed and cleaning the surface with wire brushes removing dust, foreign material and rubbish off the same out side the MD land complete all as specified and as directed.
M &L providing cement concrete 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate) in roof/Chajjas kerb or mud stops, rounded or chamfered as pading concerete all as specified and as directed.
M&L for 15 mm thick screed bed or bedding layer in cement mortar 1:4 on floor/roof /Chajjas surfaces mixed with WPC @ 200 ml per bag of cement finished the surfaces even and smooth without using extra cement all as specified and as directed.(WPC will be measured and paid separetly)
Supply only liquid Integral water proofing compound complete all as specified and as directed.
M&L for cleaning the plastered/concrete surfaces with wire brushes and applying water proofing treatment as under: (a) Apply bitumen primer at the rate of 0.27 litre per Sqm as per IS 3384-1986 and bonding bitumen of VG-10 @1.20 Kg per Sqm. (b) APP modified water proofing memebrane as per IS 16540/16532-2017 3mm thick and weighing not less than 3.80 kg per Sqm reinforce polyster/HMHDPE matt black finish over compatible primer/bonding bitumen and finish the top surface with bituminus aluminium paint @0.10 Ltr per Sqm complete all as specified.
Removal of vegetation/tree growth etc on external surface of walls or on roof top in two/four storey building by taking all necessary precaution to the workers and also the adjacent govt properties including digging out of filling holes with PCC 1:2:4 type B1 using (20 mm graded stone aggregate) and finishing the surface to match adjacent surfaces after application of suitable chemical using " break" manufactured by M/S denocil company or equivalent to avoid re growth of the vegetation and removing the debris to outside the MD land complete all as specified and directed(Any damage to the adjacent govt properties like glass windows , pipes lines etc to be made good without any extra cost for plants girth not exc 5 cm all as specified and as directed.
All as above item No 9 for plants girth exc 5 cm and n.exc 15 cm
Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth
S & F of CPVC pipes 20mm dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including taking down of pipe of 15 mm GI pipe complete all as specified.
S & F of CPVC pipes 25mm dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including taking down of 20 mm dia GI pipe complete all as specified.
S&F of 20 mm dia CPVC brass elbow complete all as specified and as directed.
S&F of 20 mm dia CPVC Brass Tee complete all as specified and as directed.
S&F of 20 mm dia male brass threaded adapter complete all as specified and as directed.
S&F of 20 mm dia female brass threaded adapter complete all as specified and as directed.
S&F of 20 mm dia CPVC brass elbow (3/4 X 1/2) complete all as specified and as directed.
Cleaning of air lock in GI/CPVC/UPVC pipe 15/20/25 mm and making the water supply available upto water taps including taking down and refixing of pipes attending the complaints of no water supply & rectifying defects in water supply lines complete all as specified.
S & F in repair PVC (SWR) pipes 110mm dia single socketed in any length with rubber ring joints fixed to walls including dismantling and breaking of pipe and fittings complete all as specified and as directed.
S&F in repair PVC (SWR) pipes 75 mm size in bore single socketed , in any length with rubber ring joints, fixed to walls including dismantling and breaking of pipe and fittings complete all as specified and as directed.
S&F in repair PVC (SWR) pipes 32 mm size in bore single socketed , in any length with rubber ring joints, fixed to walls including dismantling and breaking of pipe and fittings complete all as specified and as directed.
S&F in repair PVC (SWR) 110 mm bore pipes single socketed, in any length with rubber ring joints laid in floors including dismantling and breaking of pipe and fittings complete all as specified and as directed.
S&F in repair PVC (SWR) 75 mm bore pipes single socketed, in any length with rubber ring joints laid in floors including dismantling and breaking of pipe and fittings complete all as specified and as directed.
S&F in repair PVC bends any radius 75mm dia all as specified and as directed.
S& F in repair PVC bends any radius 110mm dia all as specified and as directed.
S&F in reapir PVC bends any radius 110 mm dia with access door all as specified and as directed.
S&F in repair PVC bends any radius 75 mm dia with access door all as specified and as directed.
S&F in repair PVC Single T any radius 110 mm dia with access door all as specified and as directed.
S&F in repair PVC Single T any radius 110 mm dia all as specified and as directed.
S&F in repair PVC (SWR) 75 mm branch piece,double (double Y) equal or unequal complete all as specified and directed.
S&F in repair PVC (SWR) 110 mm branch piece,double (double Y ) equal or unequal complete all as specified and directed.
S&F in repair PVC (SWR) 75 mm vent cowl all as specified and as directed.
S&F in repair PVC (SWR) 110 mm vent cowl all as specified and as directed.
Cutting holes into or through brick walls built , in cement mortar or cement lime mortar and stone walls built in lime mortar or walls of lime concrete of superficial area exc 150 Sqcm but n.exc 400 Sqcm complete all as specified and as dircted.
S & F bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges:large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and as directed.
Taking down chowkat or frames with shutter (without taking off shutters from the frame) exc 1.5 sqm but n.exc 4 Sqm etc complete all as specified and directed.
Taking down shutters of any description exc 1.00 Sqm but n. exc 2.00 Sqm all as specified and as directed.
Cutting holes in brick walls built in cement mortar exc half brick wall but n exc one brick wall for incerting hold fast and securing bolts etc and making good dismenteled portion in cement mortar 1 : 3 or cement concrete 1 :2 :3 type B1 as required all as specified and as directed.
S&F 2nd class hardwood plain, solid, straight chowkats and frames, wrought frame rebated on the solid, rounded or chamfered put together with glue pinned at joints all as specified and as directed.
S&F 35 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides all as specified and as directed.
S&F 35 mm thick IInd class hard wood glazed and skelton shutters open rebated and prepared to receive glass , gauge etc divided in to squares with plain, chamfered or rounded mittered and rebated sash bars any numbers, edges of framing plain chamfered all as specified and as directed.
S&F galvanised mild steel wire cloth, 0.56 mm nominal ida of wire and average width of aperature 1.18 mm and fixed with tinned tacks, or galvanised wire staples all as specified and as directed.
M&L for preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.
Easing and adjusting of shutter exc 1 Sqm and n.exc 2.0 Sqm without taking down the shutter complete all as specified and as directed
Taking down, easing and adjusting of shutter exc 1 Sqm and n.exc 2.0 Sqm and also refixing in same opening as required incl renewal & refixing of building hardwares complete all as specified and as directed
S&F stainless steel 100 mm butt hinges for doors complete all as specified.
S&F 250 mm long aluminium alloy anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheets cast or extruded sections or cast aluminium alloy complete all as specified and as directed.
S&F 150 mm size extruded aluminium alloy handles fabricated type with plate anodized complete all as specified and as directed.
S&F in repairs 200 mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and as directed.
S&F for floor door stopper(double) of aluminium alloy body and tongue anodised with hard drawn steel spring fixed to door overall length of cover plate 150mm complete all as specified and as directed.
Taking down chowkats or frames with shutters (without taking off shutters from the frame) not exc 1.5 sqm etc complete all as specified and directed.
Taking down of shutter exc 1.0 sqm but n.exc 2.0 Sqm all as specified and as directed.
S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with MS square tube and fixing in position with hold fast, complete all as specified and directed by Engr-in-Charge.(Cost of hold fast included in the unit rate of this item.)
M &L factory made solid pannel PVC door shutter 30mm thick (style) consisting of frame made out of MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck in side with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail panelling of plain colour PVC sheet to be fitted in the MS frame wedded /sealed to the styles and rails with suitable PVC sheet beading and joined together with solvent cement supplying and fixing in the frame at side,including two Nos tower bolts/ Handles for each shutter as per specification and drawing
S&F stainless steel 75 mm butt hinges for doors complete all as specified.
S&F 100 mm size extruded aluminium alloy handles fabricated type with plate anodized complete all as specified and as directed.
S&F 100 mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and as directed.
S&F in repairs galvanised mild steel wire cloth, 0.56 mm nominal ida of wire and average width of aperature 1.18 mm and fixed with tinned tacks, or galvanised wire staples all as specified and as directed.
S&F 2nd class hard wood plain fillets, Square or rectangular or triangular in section, clean sawn, planed on both sides secured with nails or beads , sectional area exc 3 Sqcm and not exc 6 Sqcm including preparation two coats of synthetic enamel paint over a coat of pink wood primer complete all as specified and as directed.
S&F steel plain fillets, Square or rectangular fixed with screws/nuts sectional area upto 3 Sqcm all as specified and as directed.
Hacking out old broken glass exc.1.5 sqm (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and as directed.
S&F in repairs sheet glass ordinary quality 4mm thick in square not exc 0.50 Sqm each pane glazing with oil putty, clip in metal frame and wooden beading in wooden frame complete all as specified.
S&F 4 mm in repairs thick figured glass pin headed type and glazing with oil putty in square n.exc 0.50 Sqm in each pane complete all as specified.
S&F in repairs 250 mm long aluminium alloy anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheets cast or extruded sections or cast aluminium alloy complete all as specified.
S&F in repairs 200 mm long aluminium anodized barrel tower bolts of extruded section complete all as specified.
S&F in repairs stainless steel 100 mm butt hinges for doors complete all as specified.
S&F in repairs continuous (Piano) hinges, mild steel, bright finish or electro galvanised width of flaps 30 mm when open complete all as specified.
S&F in repairs 150 mm size extruded aluminium alloy handles fabricated type anodized complete all as specified.
S&F in repairs MS pressed handles , oval type, stove enameled black 150 mm size complete all as specified and directed.
S&F in repairs 100 mm long Hasp and staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all specified.
S&F in repairs mild steel 300 mm ordinary rat tail rod pattern springs including roller and roller plate complete (Helical door spring) including welding to steel chowkhats if required all as specified.
S&F in repairs floor door stopper(double) of aluminium alloy body and tongue anodised with hard drawn steel spring fixed to door overall length of cover plate 140mm complete all as specified
S&F in repair vitreous china squatting pan Orissa pattern size 580 x 440 mm white with front or back inlet, integral foot rest including vitreous china 'P' or 'S' trap with providing lime concrete bedding and connecting to flusing cistern complete including breaking up existing damaged WC seat and connecting flush pipe etc and make good to floor complete all as specified
S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including CI/PVC/Vitreous china 'P' or 'S' trap , 110 mm dia PVC(SWR) WC connector and 75 mm dia pipe required length for Nahani trap along with grating complete all as specifed and as directed.
S&F in repairs plastic water closet seat cover, White, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specifed and as directed.(Make - Prayag : Cat part No 516 or Equivalent)
S&F in repair PVC white low level flushing cistern 10 ltr capacity with all fittings syphonic action with inlet ball valve and float including handle, bracket PVC short bendetc. complete all as specified and directed .(Make - Prayag : Cat Part No 503 or Equivalent)
S&F in repair PVC flush pipe 32 mm bore high density for low level flushing cistern including all joints, washers suitable for Indian type and Pedstal type WC complete all as specified.
S&F in repairs PVC internal fittings (ie syphon) for low/high level flushing cistern complete all as specified.
Fixing only in repairs PVC connection 15 mm size , 60 cm long with PTMT adopter,check nuts and washer on both sides for hot water complete all as specified. Note : Material will be supplied under Sch 'B'
S&F in repair vitreous china wash hand basin, white, flat back size 550 x 400 mm including one number brass CP waste coupling, waste pipe 32 mm dia, brackets 2 numbers including cutting for and pinning in ends of brackets complete all as specified and directed. (Make - Prayag : Cat part No 4642, Coupling-BEA-10S, Waste Pipe - 3272 or Equivalent)
S&F in repair 32 mm dia PVC waste pipe for WHB complete all as specified.
S&F sink with drainage board made of stainless steel 1 mm thick, kitchen or laboratory, with plugs, washers and wastes coupling, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all size 915mm x 460mm, bowl size 410 mm x 330 mm x 160 mm including PVC waste pipe 32 mm dia complete all as specified and directed.
Demolition of roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended RCC (reinforcement cut as required to facilitate demolition) work and removing servicebale tiles to stores and rubbish off rubbish off the same out side the MD land complete all as specified and as directed.
Fixing in repairs sinks kitchen or laboratory with plugs, washers and wastes; including beding in cement mortar\ on to dwarf walls, or including fixing cantilever brackets and connecting union to waste pipe; upto 0.5 sqm each complete all as specified and as directed. Note : Material will be supplied under Sch 'B'
Fixing in repairs 40 mm dia PVC waste pipe for SS Kitchen sink complete all as specified. Note : Material will be supplied under Sch 'B'
Fixing in repairs 32/40 mm dia Waste coupling, brass, chromium plated for Kitchen sinks, WHB etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified. Note : Material will be supplied under Sch 'B'
Fixing in repairs Bib tap cast copper alloy 15mm fancy type , Chromium plated screwed down, high pressure, with capstan head , screwed down screwed for iron pipe. Note : Material will be supplied under Sch 'B'
S&F in repair, bib taps, brass, fancy type, long body, chromium plated for 15 mm bore pipe or for brass ferrule or to GI socket complete all as specified and directed.(Make - Prayag Cat part No P6808 or Equivalent)
S&F in repairs 15 mm bore Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms). complete all as specified.
S&F in repairs 15 mm bore bib taps standard of PTMT long body any colour screwed, for iron pipe and fixed, (min weight 15 mm 120 gms)
Fixing in repairs pillar taps, brass, with capston heads, fancy type, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'cold' with long screwed shanks and flynuts screwed for 15mm bore iron pipe and fixed in repair, complete all as specified and directed. Note : Material will be supplied under Sch 'B'
Fixing in repairs angle valve/stop cock 15 mm nominal bore, brass, chromium plated, complete, fixed in repairs, all as specified and directed . Note : Material will be supplied under Sch 'B'
S&F 15 mm bore angle stop valve of PTMT any colour pressure screwed for iron pipe and fixed, (Min weight 90 gms).
Petty repairs to leakage of Bib taps, Pillar taps, Angle cock, Stop Cock, Wall mixture, low level or high level flushing cistern, Shower, Flush pipe by changing jumper valves, No water supply complaints (including taking down and refixing of pipes), removal of airlocks and making functional, ensuring proper water supply complete all specified and directed by Engineer in charge.
S&F in repair brass spindle for pillar taps, stop valves, bib taps, angle valves, concealed stop cocks & wall mixer cock for 15mm by changing jumper valves, washers etc complete all as specified
Fixing only,in repairs 15mm size health faucet, ABS body , with wall hook and 1 metre stainless steel braided rubber hose pipe complete all as specified and as directed. Note : Material will be supplied under Sch 'B'
S&F in repairs brass chromium plated grating 125 mm dia circular with centre hole/ without hole of approved make and fixing with cement mortar 1:3 on Nahani trap or floor trap complete all as specified.
S&F in repairs 75mm dia PVC (SWR) floor/Nahani trap, plain with grating including solvent cement
Demolition of roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended RCC (reinforcement cut as required to facilitate demolition) work and removing servicebale tiles to stores and rubbish off rubbish off the same out side the MD land complete all as specified and as directed.
Fixing in repairs kitchen plate rack made of stainless steel 1mm thick complete size 900 x 750mm x 250mm width of trade pattern including assembly complete all as specified and directed. Note : Material will be supplied under Sch 'B'
M&L for preparation of old plastered or unplastered surfaces of ceiling and applying one coat of white washing complete all as specified and as directed.
M&L for preparation of old distempered surfaces of ceiling and applying one coat of Oil bound distemper complete all as specified and as directed.
M&L for preparation of old plastered or unplastered surfaces of walls and cornices and applying one coat of white wash complete all as specified and as directed.
M&L for preparation of old distempered surfaces of walls and applying one coat of Oil bound distemper complete all as specified and as directed.
M&L for complete removal of existing treatment on old plastered surfaces of walls and applying two coats of oil bound distemper over acoat of 1 mm thick birla wall care putty, complete all as specified and directed.
M&L for rendering 10mm thick in CM 1:4 on fair face of brick or concrete surfaces of walls finished even and smooth without using extra cement including raking out joints, hacking for key, scrubbing down with water etc and removing rubbish of the premises complete all as specified and as directed.
M & L for applying two coats of Oil bound distemper on newly plastered surfaces incl preparing the surfaces and applying one coat of alkali resistant priming paint complete all as specified and directed .
M&L for complete removal of existing treatment on old plastered surface of walls and applying two coats of antifungal weather proof apex paint over a coat of primer complete all as specified and as directed..
M&L preparation of old painted surfaces of wood work and joinery exceeding 10 cm width or girth and applying one coat synthetic enamel paint complete all as specified and as directed.
M&L preparation of old painted surfaces of steel and iron work exc 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.
M&L for rendering 15mm thick in CM 1:6 on fair face of brick or concrete surfaces of walls finished even and smooth without using extra cement complete all as specified and as directed.
M&L for preparation of new plastered surface of walls and applying two coats of antifungal weather proof apex paint over a coat of primer complete all as specified and as directed..
Demolition of Brick Work/concrete/Stone boulder masonry built in cement mortar as in drain/compound wall etc of any descrpn all as specified and as directed.
Excavation in trenches n. exc 1.50 m wide and n.exc 1.5 m deep and taking out in fdn in soft/ loose soil all as specified and as directed.
M&L for returning filling in including spreading levelling watering and well ramming in layers n.exc 25cm of soft / loose soil all as specified and as directed.
M&L for removal of excavated material exc 250m but up to a distance of 1.5 km and depositing where directed
M&L PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundation concrete.
M&L for precast cement concrete block masonry type C1, 1:3:6 (20 mm graded agg) with solid blocks, exc 10 cm in width and setting in cement mortar 1:6 complete all as specified and directed.
M/L Brick work with sub class 'B' bricks straight or curved on plan exc 6 mtr mean radius built CM 1:6
M&L Plain Cement Concrete Type B1 1:2:4 (using 20 mm graded granite stone aggregate) as in benching of man holes including forming centre channels half round or 1/4 section.
Extra for forming fair finished channel or drain 30cm ginth (inner ginth) in cement concrete using extra cement incl forms, moulds stopped.
M&L cement concrete 1:2:4 type B 1 (using 20mm graded coarse aggregate) as surface channels and drains complete all as specified and directed.
M&L for providing cement concrete type C1, 1:3:6 ( 20 mm graded agg) as in coping, bed plates for angle iron etc in CM 1:6
Taking down cement plaster on brick or stone walls including racking out joints, hacking for key scrubing down with water etc.and removing from the debris out side MD land all as specified and as directed.
M&L for rendering 15mm thick on fair face brick wall finished even and smooth without usingh extra cement CM 1:6
Demolition concrete in ground floors and pavings n exc 15cm thickness (below or above ground level) including removal of debris out side the MD land all as specified and as directed.
Demolition /breaking of drain pipes of any description set in CM 200 mm and disposing as directed
M&L Reinforced concrete pipes, class NP2, laid in trenches and jointed complete with collars 200mm dia and jointed as specified
M&L concrete bed ( 1 : 3 : 6) type C-2 to drain pipes including packing under haunching against sides for 200 mm dia pipe
Demolition of Reinforced precast cement concrete manhole/drain cover slab of any description and in any position including and segregation of reinforcement etc
M&L Pre cast RCC (1:2:4) type B1 for cover slab for man holes and set in cement mortar (1:6)
M&L for mildsteel deformed ,TMT bars 10 mm cut to length bend to shape require including cranking hooping ends binding in & wine annealed not less than 0.9 mm dia or securing with clips all as specified and as directed.
M&L for mildsteel deformed ,TMT bars 6 to 8 mm cut to length bend to shape require including cranking hooping ends binding in & wine annealed not less than 0.9 mm dia or securing with clips complete all as specified and as directed.
Cleaning of man holes/chambers by removing muck/sludge/liquid mud etc ( in foul position) upto 1 Mtr depth including taking off manhole covers and refixing the same in position upto 1 Mtr depth of any size of Man holes and remove the sludge/muck/liquid mud outside the MD land complete all as specified and as directed.
All as per item No. 135 here in before but depth exceeding 1 Mtr and not exceeding 3 Mtr depth, ditto complete all as specified and as directed.
Cleaning of blocked/choked sewage lines by rodding between Man holes in any depth, cleaning and removing muck/sludge/liquid mud outside the MD land including testing of pipes by filling with water complete for 100 mm bore pipe.
All as per item No.137 here in before but 150mm bore pipe
All as per item No.137 here in before but 200mm bore pipe
Provn of labours for opening cover of manhole/gully trap, floor trap/WHB/WC upto 1st manhole of any type and any mouth depth removing the sludge/solid content from the manholes/gully trap by manual/mechanical method and cleaning the sewage lines and manholes any size and depth either by water pressure, flushing with water or rodding and other suitable means at the discretion of the contractor at his own arrangement so as to remove the blockages and making the sewer lines and manholes/gully trap and any type of sewage system related blockage and making fully functional to the entire satisfaction of Engineer-in-Charge and removing the sludge/solid contents out side defence land, repositioning of the RCC/CI cover slab grating all as directed by Engineer-in-Charge in the area . (Note : Contractor shall deploy minimum 01 safaiwala for per day to carry out daily complaints and other works for all areas i.e DAD, PCDA, PAO (OR) SOUTH, LAO/RAO/PCTC. Daily attendance register shall be maintained and amount for any absence shall be deducted day wise from payment).
Cleaning/clearing of 200mm bore sewer line under ground of any depth by removing any type of blockage including desilting, descaling and de-chocking from drain mechanically with combined high pressure water jeting cum suction (Vacuum) type machine mounted on LCV/HCV and having facilities of high pressure water jetting, high pressure vacuum and provn of hydraulic application through high pressure thermoplastic fibre based water jetting hose and through conical round shape nozzles pipe and flushing after cleaning/clearing of sewage line.The entire sludge water shall be disposed off out of Defence land complete all as specified and directed by Engineer-in-Charge
Taking out mud/soil etc from drains including removal of drain covers of any description and re- fixing the covers in the same position and removal of the soil/mud to outside the MD land all as directed
Taking out mud/soil etc from Open drains covers of any description and removal of the soil/mud to outside the MD land all as directed
Removing Building Materials etc to a distance upto 5.0 Km total distance, beyond the lead included in the rated, including loading and stacking at the destination to outside the MD land as per own arrangement
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .