Civil Work

Amount

Dismantling, removing and carefully stacking Doors & windows including removal of frames, hinges and fastenings etc., complete complying with standard specification and as directed by the departmental officers at site of work.

Dismantling the damaged floor finish and dadooing walls in cement mortar with mosaic tiles / Glazed tiles/cuddapah slab and clearing away with carefully stacking the material useful for reuse for any thickness etc., complete complying with standard specification and as directed by the Departmental officers.

Supplying and fixing Double Skin wall panelling using 21/2"x11/2" Aluminium Channel 2"-0" intervals on both directed and fixing to the existing wall portion and fixing 12mm thick anti termites water proofing plywood using screws etc., and finishing with 1mm thick special texture super matt laminate sheet of approved quality and colour with grooves using fevicol etc., complete complying with standard specification and as directed by the departmental officers at site of work.

Supplying and fixing Single Skin wall panelling using 21/2"x11/2"Aluminium Channel 2"-0" intervals on single directed and fixing to the existing wall portion and fixing 12mm thick anti termites water proofing plywood using screws etc., and finishing with 1mm thick special texture super matt laminate sheet of approved quality and colour with grooves using fevicol etc., complete complying with standard specification and as directed by the departmental officers at site of work.

Supplying and fixing Modular Partition -75 mm thickness – Internal Aluminium extruded section. Two adjacent frames are connected to each other by M8 size bolts & nuts. The tiles of the partition are made out of 9 mm thick Prelaminated particle board / Particle board with Fabric/Magnetic fabric board (1 per workstation) / White board (1 per workstation) / single plain glass Double skin partition. The raceway Aluminium sheet at the skirting level of the partition. Electrical and data cables can run horizontally and vertically throughout the modular partition. Switches and sockets can be fitted at any require points in prelaminated particle board and raceway. The top and end trims are made out of Aluminum extruded sections. All the aluminium of the partitions will be powder coated to the thickness of 40 – 50 microns after necessary treatment. 1200mm(H) etc., Complete

Supplying and fixing Modular Partition -75 mm thickness – Internal Aluminium extruded section. Two adjacent frames are connected to each other by M8 size bolts & nuts. The tiles of the partition are made out of 9 mm thick Prelaminated particle board / Particle board with Fabric/Magnetic fabric board (1 per workstation) / White board (1 per workstation) / plain glass Double skin partition. The raceway Aluminium sheet at the skirting level of the partition. Electrical and data cables can run horizontally and vertically throughout the modular partition. Switches and sockets can be fitted at any require points in prelaminated particle board and raceway. The top and end trims are made out of Aluminum extruded sections. All the aluminium of the partitions will be powder coated to the thickness of 40 – 50 microns after necessary treatment. 2100mm(H) etc., complete.

Supplying and fixing the solid core flush door shutters with commercial ply on both side with teak wood lipping alround 35mm thick including cost of furniture fitting such as 3 nos 4"brass butt hinges,2nos 6"brass tower bolts,2nos 4"brass handle, 1 no brass drop, single key shutter, mortice lock without night latch, 1 no door closer, 1 no brass door stopper, 1mm thick best quality lamination sheet etc., complete complying with standard specification.

Supplying and fixing single shutter door in 37mm thick block board of approved quality make with 80 x 50 beechwood wood frame finished with polish. Surface finished in 1mm laminate of approved shade, with 6mm thick vision panel glass, inclusive of all hardwares- door closer, Hinges, Dead Lock, Handles and door stopper etc., complete.

Brick work in Cement Mortar 1:5 using best quality of Second Class Ground Moulded Chamber Burnt Bricks 9" x 4-3/8" x 2-3/4" for foundation and basement including curing, etc., complete complying with standard specifiction.

For Fifth floor

Plastering with Cement Mortar 1:5 (One cement and Five sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers.

Brick partition walls of 11.50cm thickness using best quality II Class Ground Chamber Burnt Bricks of size 9" x 4-3/8" x 2-3/4" in Cement Mortar 1:3 (One Cement and Three Sand) using hoop iron reinforcement if found necessary including curing etc. complete and as directed by the departmental officers.

For Fifth floor

Cement Concrete 1:1-1/2:3 (One Cement, One and a half sand and Three hard broken stone jelly) using 20 mm gauge hard broken granite stone jelly for all RCC items of works excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary and bearing surfaces of walls, beams etc. shall be finished smooth with Cement Mortar 1:3 (One Cement and Three Sand) and kraft paper laid over it without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers

For Fifth floor

Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification. (Contractor has to make his own arrangements for the supply of steel and binding wire)

Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specificaiton. (Payment for centering shall be given after the concrete is laid)

For plane surfaces such as RCC floor slab, roof slab, beams, lintels, bed blocks, landing slab, waist slab, portico slabs and beams, etc.

Cleaning the surface throughly with water and remove all the impurities and loose plaster, flacks, fungus growth etc by suitable mechanical means like scrapping or wire brushing and subsequantly wash with adequate water to get an abosulutely cleaned surface to take on further treatment. All the grooves will be refilled with multi proof co polymer with filler loose plastes and cured cement mass will be removed to make the surface clean and applying Gal tech CT epoxy virigen solvent free anti corrosive two pack resin 50 + Hardner 50 (1 coat) as primer impregnated with 110 GSM class cloth over that apply C.T. Epoxy two coats as finish that will for's FRB lining etc. complete and as direted by the departmental officers.

Brick Jelly Lime Concrete 1:2:5 using 20mm brick jelly in Lime Mortar 1:2 - 10 cu.m. etc., Complete complying with standard specification and as directed by the departmental officers.

Flooring with Designed ceramic tiles of size 305 x 305 x 6 mm laid over 20 mm thick cement mortar 1:3 (One Cement and Three Sand) base mortar over the existing slab / floor including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with white cement mixed with colouring pigment at the rate of 0.3 Kg. / sq.m. etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Dadooing walls with best approved quality, Designed colour ceramic tiles of size 600mmx300mmx8mm set in Cement Mortar 1:2 (One Cement and Two sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc., complying with standard specification and as directed by the departmental officers.

Paving the floor with best quality Double charged Vitrified Tiles of size 600 x 600 x 8mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Supplying and fixing in position white glazed European Water Closet of best quality and Jaguar make with 100 mm "P" or "S" trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings such as 15mm brass ball valve with polythene float with brass handle, union, coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings such as 15mm brass connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe including cost of 600mm length of 110mm dia PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition etc. complete complying with standard specifications.

Supplying and fixing in position best quality and Jaguar make Indian made white glazed earthenware wash hand basin of size 550 x 400mm (with pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia "B" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers

Supplying and fixing Stainless steel coated towel rail 600mm long and 20mm dia meter with brackets of same materials including cost of teak wood plug and CP screws etc complete complying with standard specification and as directed by the departmental officers

Supplying and fixing Stainless steel coated towel ring with brackets of same materials including cost of teak wood plug and CP screws etc complete complying with standard specification and as directed by the departmental officers

Supplying and fixing the damaged mirror with new on of Special type of mirror of size 1.00mx0.60m of approved quality and brand PVC / Fibre Glass framed board backing of approved colour fixed with brass screws, rawl plug, etc., complete complying with standard specification. (The mirror should be got approved by the Executive Engineer before use on woks)

Supplying and fixing in position 15mm dia special type SS Long body tap (heavy duty) of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the works)

Supplying and fixing Health faucet with new one of Two way bib cock tap with flexible hose 15mm dia (METRO) of approved quality and make including labour charges for fixing in position etc complete complying with standard specification and as directed by the departmental officers at site of work.

Supplying and fixing position CI Nahani Trap / Floor Trap of size 100 x 75mm with best stainless steel gratings of approved brand and quality, fixed over a bed of brick jelly lime concrete 1:2:5 (One part of lime, two part of sand and five part of 40mm gauge brick jelly) and finished with Cement Mortar 1:3 (One Cement, Three sand) including dismantling masonry works wherever found necessary and making good the dismantled portions to the original condition and giving connection to the CI / PVC pipes, etc., complete complying with standard specification. (The Nahani Trap should be got approved by the Executive Engineer before use on works)

Supplying and fixing in position PVC Trims (Corner beading) for wall joints, Pillar corners etc., complete and as directed by the departmental officers.

Supplying and fixing the WPC door shutters including cost of furniture fitting such as 3 nos 4"brass butt hinges, 2nos 6"brass tower bolts, 2nos 4"brass handle, 1 no brass drop, single key shutter, mortice lock without night latch, etc., complete complying with standard specification.

Renewing and laying and jointing UPVC Pipe(Un-Plasticized Polyvinyl Chloride) UPVC used for commercial applications operate and designed to handle higher water pressure (schedule-80) but excluding cost of such specials and fixing in position dismantling masonry and make the same to original condition etc complete complying with standard specification and as directed by the departmental officers at site of work.

20mm dia UPVC pipe

Supplying and fixing the following UPVC special of approved quality and make including labour for fixing in position etc complete complying with standard specification and as directed by the departmental officers at site of work.

20mm dia UPVC Elbow

20mm dia UPVC Tee

20mm dia UPVC Coupler

20mmx15mm dia UPVC Elbow

20mmx15mm dia UPVC Tee

Supplying and fixing in position best quality PVC soil / waste pipes of various dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications. (The PVC pipes should be got approved by the Executive Engineer before use on works). The rate for earth work excavation will be measured and paid separately in the cases where the pipe lines are proposed to laid below ground level

75mm dia PVC waste pipe

110mm dia PVC waste pipe

Supplying and fixing in position PVC specials of the following dia and types of approved quality confirming to BIS and providing leak proof joints including fixing to the walls and giving connection to the PVC soil stacks, dismantling the masonry or RCC works and re-doing the dismantled portion to original condition etc., complete complying with standard specifications. (The PVC specials should be got approved by the Executive Engineer before use on works).

75mm dia PVC Elbow

75mm dia PVC door Elbow

75mm dia PVC Tee

110mm dia PVC Elbow

110mm dia PVC Tee

Reconstruction of damaged Manhole chamber of following with a base concrete of by new on of a base of concrete of Plain cement concrete 1:5:10, 10cm thick over a 10cm sand cushiion & brick work in CM 1:5 for chamber wall with 20mm thick 1:3 CM plastering for walls flooring including cost of labour charges curing cost of SFRC cover slab of size 0x60x0.60 including labour charges for fixing the slab inposition etc.,

Supplying and fixing vertical blinds with new horizontal zebra fabric roller blinds of superior quality double ply plinds with 100% polister composition weight of 340 gsm / square metre and 0.40mm thick and finished width of 250cm with 100% light transmission etc.,complete complying with standard specification and as directed by the departmental officers at site of work.

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (Sliding) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work

Supplying and fixing the new design ornamental sound proof Armstrong grid false ceiling arrangements with alu. anodized T section and L angle frame work grid of size 60x60cm with Aluminium T section 25x25x2.8mm L angle of size 25x25x2mm thick and the same is supported at suitable intervals by adjustable type 6mm dia M.S rods with suitable threaded nuts, suspended rod and hanging from ceiling at 1.20m c/c in longitudinal section and 60cm at middle portion 60x60cm panel should be covered with 12mm thick Armstrong sheet in grid so as to give neat finishing etc., complete complying with standard specification and as directed by the Departmental officers.

Supplying and fixing the Gyp board false ceiling using 10mm thick Gypboard of approved quality design pattern and drops given by the deptl officers. Using "U" shaped galvanised iron channel of size 25x25x0.55mm thick at 1.20mc/c on both longtitudinal and cross fixing "U" shaped G.I channel of size 50x10x0.55mm thick, direction for vertical sup port and at 0.90m centre to centre on longtitudinal direction respectively for Horizontal support by using teak wood reepers at corners and at intermediately and fixing the "GYPBOARD" on the panel provided as per design/pattern given by the deptl officers. And fininshing the ceiling surface with same plaster of paris materials etc.Necessary openings should be could with Acrylic paint made for providing spot light, floursent tubes in the ceiling by using kit ply 12mm thick and openings should be std specfn and etc complete complying with standard specification and as directed by the departmental officers at site of work.

Painting the old walls two coat of Interior Emulsion paint including one coat of putty cost of brushes, Labour charges scoffolding charges etc., complete complying with standard specification and as directed by the departmental officers at site of work.

Painting the ceiling one coat of Interior Emulsion paint including cost of brushes, Labour charges scoffolding charges etc., complete complying with standard specification and as directed by the departmental officers at site of work.

Providing two legged scaffolding using 48.30mm dia heavy duty MS pipe over all height of 3.00m the distance between 2 legs being 1.25m and the spacing of the post being 2m in each rows and providing platform with C.W. planks using 40mm thick silver oak and 1.00m wide in complete form with horizontal bracings @ 1.50m c/c vertical direction and with cross bracings using same 48.30mm dia including cutting, threading assembly with red oxide primer, labour charges cost of speicals such on large plate, shoe, carcher, coupling, bolt and nut transportation charges. The bottom of vertical post shall rest on 300x300x70mm 1:2:4 concrete base as per the standard specification and as directed by the dept. officers.

Initial height of 3.00m

Additional height of 2.50m

Collecting the scattered debries from the campus and conveying away the same to ouside by lorry to a lead of 3km (Entirely within city limit including loading and unloading charges and dumping in low places and levelling neatly etc., complete complying with standard specification and as directed by the departmental officers.

HOD Table of size 2100mm X 900mm X 750mm(H)-Top & Leg 25mm thick particle board duly postformed edge with flex laminate. Modesty panel 18mm thick prelaminated particle board. 3 drawer fixed half height size 400 X 450mm X 450mm(H). Side table size 1050mm X 450mm X 750mm(H)- Top & Leg 25mm thick particle board duly postformed edge with flex laminate. Modesty panel 18mm thick prelaminated particle board. 3 drawer fixed half height size 400 X 450mm X 450mm(H). Stoage unit 2200mm X 400mm X 750mm(H)- 1nos fabricated out of 18mm thick prelminated particle board duly edge banded with 2mm PVC beeding. Door swing type with lock & key arrangment.

PC Table of size 1200mm X 600mm X 750mm(H)-Top 25mm thick particle board duly postformed edge with flex laminate. Leg & Modesty panel 18mm thick prelaminated particle board. mobile pedestal size 400 X 450mm X 640mm(H) having 2 drawer one filing drawer Stoage unit 900mm X 400mm X 750mm(H)- 1nos fabricated out of 18mm thick prelminated particle board duly edge banded with 2mm PVC beeding. Door swing type with lock & key arrangment.

PO Table of size 1500mm X 675mm X 750mm(H)-Top 25mm thick particle board duly postformed edge with flex laminate. Leg & Modesty panel 18mm thick prelaminated particle board. side table 900mm X 450mm X 750mm(H) Top 25mm thick particle board duly postformed edge with flex laminate. Leg & Modesty panel 18mm thick prelaminated particle board. mobile pedestal size 400 X 450mm X 640mm(H) having 2 drawer one filing drawer Stoage unit 2700mm X 400mm X 750mm(H)- 1nos fabricated out of 18mm thick prelminated particle board duly edge banded with 2mm PVC beeding. Door swing type with lock & key arrangment.

Supplying and fixing of Visitor Chair R type : The chairs are frame made of 14 SWG round tubular frame with powder coated The seat and back portion of the chair will be made of foam cushion and good quality approved fabric with PU armrest etc., complete complying with standard specification and as directed by the departmental officers.

Supplying and fixing Executive officer chairs with arm rest Revolving type Back rest: mesh back, seat: moulded foam with fabric, arms will attached with seat and back, leg: tilting with hydraulic gas for height adjustment and nylon base with twin castoe wheel including transportation charges, loading and unloading charges etc., Complete and as directed by the departmental officers.

WORKSTATION 75mm thick aluminium extruction section partition with powder coated along with 9mm thick prelaminated particle board with provision of electrical and data raceway. Top - 25mm thick particle board duly post formed edge with flex laminate. Mobile pedestal of size 400mm X 450mm X 640mm(H) - fabricated out of 18mm thick prelaminated particle board duly edge banded. Having 2 drawer one filing drawer. Keyboard tray of size 600mm X 300mm 18mm thick prelaminated particle board duly edge banded. Cpu trolley M.S powder coated. each workstation size 1200mmm X 525mm X 1200mm(H)

2 seater linear type

4 seater back to back

1 seater linear type

6 seater back to back

Supply and fixing in Workstation Chair with Head rest Back Rest - Fabricated out of mesh Seat- Fabricated out of 12mm ply etc., Complete and as dirceted by the departmental officers.

STORAGE UNIT- All 18mm thick prelaminated particle board duly edge banded with 2mm PVC beeding. Door - swing type. Lock & key arrangement.

size : 1200mm X 600mm X 1200mm(H)

size : 2550mm X 450mm X 1200mm(H)

size : 2700mm X 450mm X 1200mm(H)

Supply of following Two seater Sofa Set of best approved quality, colour and brand including Lifting charges and Transportion charges and labour charges etc. complete and as directed by the departmental officers

S.R MINES