REPAIR / MAINTENANCE OF CERTAIN WOODEN FURNITURE ITEMS OF MARRIED AND OTM AT BSO UNDER GE SHILLONG

Amount

Note : (a) Work will be executed where the furniture exist in different user units of GE Shillong including BSO furniture yard complete as directed by Engr-In-Charge.

CHAIR DINING (FD- 279)

Removing of old existing unsv back leg of chair in any position, S&F new back leg made out of 1st class hard wood (teak) with nails of appropriate size. Rest all as shown on drg and as directed by the Engineer-in-Charge.

All as 1.01 above but front leg

All as 1.01 above but side rail

All as 1.01 above front/ back rail

All as 1.01 above but stiffner

All as 1.01 above but back strip

Removing of old unsv cane and re-canning of chair dining with 2 mm cane as per mat Pattern of superior quality cane of width & thickness as mentioned in Drg. (Make of cane shall be Aryan/Shah/Binny/Premier)

S & F new hard PVC/rubber shoe/ring of superior quality fixing with suitable screws to the bottom of leg. Rest all as shown on drg and as directed by Engr-in-charge.

CHAIR DINING JCO/ORs (FD/MAP-II/05)

S&F new PVC seat 4mm thick with holes screwed with rails all as specified in drg including removal of old existing unsv PVC seat of chair complete, as directed by the Engineer-in-Charge

M&L for removal of old existing unsv back leg of chair in any position, S&F new back leg made out of 1st class hard wood (teak) with nails of appropriate size. Rest all as shown on drg and as directed by the Engineer-in-Charge.

All as 2.02 above but front leg

All as 2.02 above but side rail

All as 2.02 above front/ back rail

All as 2.02 above but stiffner

All as 2.02 above but back strip

S & F new hard PVC/rubber shoe/ring of superior quality fixing with suitable screws to the bottom of leg. Rest all as shown on drg and as directed by Engr-in-charge.

CHAIR WOODEN BOTTOM W/O ARMS (FD-285)

M&L for removal of old existing unsv plywood seat as existing of chair in any position, S&F new BWR grade plywood seat of appropriate size as per drawing and as directed by the Engineer-in-Charge.

M & L for replacement of back leg made of 1st class hard wood (teak)

All as 3.02 above but front leg

All as 3.02 above but side rail

All as 3.02 above but front/ back rail

All as 3.02 above but wooden back strip

All as 3.02 above but stiffener

S & F new hard PVC/rubber shoe/ring of superior quality with suitable screws for fixing complete all as shown on drg and as directed by Engr-in-charge.

CHAIR WRITING (FD-280)

M&L for removal of old existing unsv back leg of chair in any position, S&F new back leg made of 1st class hard wood (teak) all as shown on drg, specified and as directed by the Engineer-in-Charge.

All as 4.01 above but front leg

All as 4.01 above but side rail

All as 4.01 above but front or back rail

All as 4.01 above but back strip

All as 4.01 above but arm rest

All as 4.01 above but stiffner

Removing of old unsv cane and re-canning of chair writing with 2 mm cane as per mat Pattern of superior quality cane of width & thickness as mentioned in Drg. (Make of cane shall be Aryan/Shah/Binny/Premier)

S & F new hard PVC/rubber shoe/ring of superior quality with suitable screws for fixing complete all as shown on drg and as directed by Engr-in-charge.

CHAIR EASY (FD-229 )

M&L for removal of old existing unsv back leg of chair in any position, S&F new back leg made of 1st class hard wood (teak) all as shown on drg, specified and as directed by the Engineer-in-Charge.

All as 5.01 above but front leg

All as 5.01 above but side rail of seat frame

All as 5.01 above but front or back rail of seat frame

All as 5.01 above but side rail of back frame

All as 5.01 above but top or bottom rail of back frame

All as per item No 5.01 above but replacement of arm rest

Removing of old unsv cane and re-canning of chair easy with 2 mm cane as per mat Pattern of superior quality cane of width & thickness as mentioned in Drg. (Make of cane shall be Aryan/Shah/Binny/Premier)

S & F new hard PVC/ rubber shoe/ring of superior quality with suitable screws for fixing complete all as shown on drg and as directed by Engr-in-charge.

SOFA SET 05 SEATER WITH CUSHION ( FD-281/373/ 258)

M & L for removing old unsv front leg and S&F of new front leg made of 1st class hard wood (teak) as per existing shape and size.

All as 6.01 but Rear Legs.

All as 6.01 but Side Rails.

All as 6.01 but Front Rails for Large three seater.

All as 6.01 but Back Rails for Large three seater .

All as 6.01 but Front Rails for Single seater.

All as 6.01 but Back Rail for Single Seater.

All as 6.01 but Arm Rests.

All as 6.01 but Wooden Bearers for Large three seater.

All as 6.01 but Wooden Bearers for Single seater

All as 6.01 but Teak Wood Batten for Seat and Back

Supply of Cushion of size 21'x22'x4' Foam 40 Density 100mm thick (Make : Sleepwell/Kurl-on Goldline /Featherfoam with Cushion cover of superior quality duly Stiched as per direction of Engr-in-charge/GE . Quality of tapestry Cloth shall be as per sample kept at GE office . Colour of tapestry cloth shall be approved by Engr-in-Charge/Garrison Engineer.

PEG TABLE (FD-277/384)

Taking down old existing unsv top from peg table and S&F new top made out of 18/19mm thick exterior grade pre laminated MDF board with 04 mm Teakwood beading all around it all as directed by Engineer-in-charge.

All as 7.01 above but leg made of 1st class hard wood(teak)

All as 7.02 above but long top rail

All as 7.02 above but short/bottom rail

S & F new hard PVC shoe/ ring of superior quality with suitable screws for fixing complete all as shown on drg including taking down complete, as directed by Engr-in-charge.

TEAPOY (FD-278, FD-382)

M&L for removal of old existing unsv top of Teapoy in any position, S&F new top made out of 18/19mm thick exterior grade pre-laminated MDF board with 04 mm Teakwood beading all around it all as directed by Engineer-in-charge. (Make:- Green panel max/ Century/ Archid Ply/National Plywood).

All as 8.01 above but leg made of 1st class hard wood(teak)

All as 8.02 above but long rail

All as 8.02 above but short rail

All as 8.02 above but stiffner

S & F new hard PVC shoe/ ring of superior quality with suitable screws for fixing complete all as shown on drg and as directed by Engr-in-charge.

TABLE DINING 1200 x 900mm (FD- 273/FD/MAP-II/03)

M&L for removal of old existing unsv top of table in any position, S&F new top made out of 18/19mm thick exterior grade prelaminated MDF board (Make:- Green panel max/ Century/ Archid Ply/National Plywood) with 04 mm Teakwood beading all around it for Table dining 6 persons all as per drg & as directed by Engineer-in-charge.

All as 9.01 above but new leg made of 1st class hard wood

All as 9.02 above but long rail

All as 9.02 above but short rail

S& F new bracket of size 100 x 100 x 35 mm made of 1st class hard wood and fixing with 02 Nos suitable size steel screws complete as directed by Engr-in-charge

S & F new hard PVC shoe/ ring of superior quality with suitable screws for fixing complete all as shown on drg and as directed by Engr-in-charge.

TABLE DINING 6 PERSONS (FD- 273/FD/MAP-II/03)

M&L for removal of old existing unsv top of table in any position, S&F new top made out of 18/19mm thick exterior grade MDF board (Make:- Green panel max/ Century/ Archid Ply/National Plywood) with 04 mm Teakwood beading all around it for Table dining 6 persons all as per drg & as directed by Engineer-in-charge.

All as 10.01 above but new leg made of 1st class hard wood

All as 10.02 above but long rail

All as 10.02 above but short rail

S& F new bracket of size 100 x 100 x 35 mm made of 1st class hard wood and fixing with 02 Nos suitable size steel screws complete as directed by Engr-in-charge

S & F new hard PVC shoe/ ring of superior quality with suitable screws for fixing complete all as shown on drg and as directed by Engr-in-charge.

TABLE 900 x 600 MM WITHOUT DRAWER ( FD-284)

M&L for removal of old existing unsv top of table in any position, S&F new top made out of 18/19mm thick exterior grade pre laminated MDF board (Make:- Green panel max/ Century/ Archid Ply/National Plywood) with 04 mm Teakwood beading all around it all as directed by Engineer-in-charge.

All as 11.01 above but leg made out of 1st class hard wood

All as 11.02 above but long rail

All as 11.02 above but short rail

All as 11.02 above but stiffner

S & F new hard PVC shoe/ ring of superior quality with suitable screws for fixing complete all as shown on drg and as directed by Engr-in-charge.

TABLE 900 x 600 MM WITH DRAWER ( FD-283)

M&L for removal of old existing unsv top of table in any position, S&F new top made out of 18/19mm thick exterior grade pre laminated MDF board (Make:- Green panel max/ Century/ Archid Ply/National Plywood). with 04 mm Teakwood beading all around it all as directed by Engineer-in-charge.

All as 12.01 above but leg made out of 1st class hard wood

All as 12.02 above but long rail

All as 12.02 above but short rail

All as 12.02 above but stiffner

Taking down old existing unsv drawer of table in any position, S&F new drawer with Knob fittings made out of 1st class hard wood all as directed by Engineer-in-charge

S & F new hard PVC shoe/ ring of superior quality with suitable screws for fixing complete all as shown on drg and as directed by Engr-in-charge.

TABLE 900 x 900 (3'x3') (FD-228/291)

M&L for removal of old existing unsv top of table in any position, S&F new top made out of 18/19mm thick exterior grade pre laminated MDF board (Make:- Green panel max/ Century/ Archid Ply/National Plywood). with 04 mm Teakwood beading all around it all as directed by Engineer-in-charge.

All as 13.01 above but leg made out of 1st class hard wood

All as 13.02 above but rail

S& F new bracket of size 100 x 100 x 35 mm made of 1st class hard wood and fixing with 02 Nos suitable size steel screws complete as directed by Engr-in-charge

S & F new hard PVC shoe/ ring of superior quality with suitable screws for fixing complete all as shown on drg and as directed by Engr-in-charge.

TABLE CENTRE (FD-235/274)

Taking down old existing unsv top from table centre and S&F new top made out of 18/19mm thick exterior grade pre laminated MDF board (Make:- Green panel max/ Century/ Archid Ply/National Plywood). with 04 mm Teakwood beading all around it all as directed by Engineer-in-charge.

All as 14.01 above but leg made out of 1st class hard wood

All as 14.02 above but long rail

All as 14.02 above but short rail

All as 14.02 above but stiffener

S & F new hard PVC shoe/ ring of superior quality with suitable screws for fixing complete all as shown on drg and as directed by Engr-in-charge.

TABLE BED SIDE (FD-276)

S&F new back Ply for table bed side of 6 mm ply BWR grade IS:303 as per drg, complete, including taking down old unserviceable one, all as specified and as directed by Engr-in-charge.

S&F new shelf for table bed side with 12 mm thick prelaminated MDF board as per drg. 4mm teakwood beading duly french polished shall be provide to open edges, complete, including taking down old unserviceable one, all as specified and as directed by Engr-in-charge.

S&F new side plank for table bed side with 18mm thick prelaminated MDF board as per drg. 4mm teakwood beading duly french polished shall be provide to open edges, complete, including taking down old unserviceable one, all as specified and as directed by Engr-in-charge.

S&F new top/base for table bed sidewith 18 mm thick prelaminated MDF board as per drg. 4mm teakwood beading duly french polished shall be provide to open edges, complete, including taking down old unserviceable one, all as specified and as directed by Engr-in-charge.

TABLE WRITING ( FD-275)

M&L for removal of old existing unsv top of table in any position, S&F new top made out of 18/19mm thick exterior grade pre laminated MDF board (Make:- Green panel max/ Century/ Archid Ply/National Plywood). with 04 mm Teakwood beading all around it all as directed by Engineer-in-charge.

All as 16.01 above but leg made out of 1st class hard wood (Teak)

All as 16.02 above but long rail

All as 16.02 above but top/bottom short rail

All as 16.02 above but stiffner

Taking down old existing unsv drawers with knobs of table in any position & S&F new drawers with knobs made of 1st class hard wood (teak) complete all as specified in drg and directed by Engr-in-charge/GE.

Taking down old existing unsv Locker/Cabinet door with complete fittings of table in any position & S&F new Locker/Cabinet door with complete fittings including knob in shade as specified in drawing and directed by Engr-in-charge/GE

Taking down old existing unsv sides of side locker of table in any position & S&F new sides of side locker made out of 18/19mm thick exterior grade pre laminated MDF board all as directed by Engineer-in-charge. (Make:- Green panel max/ Century/ Archid Ply/National Plywood).

Taking down old existing unsv shelf of side locker of table in any position & S&F new shelf of side locker made out of 12 mm thick exterior grade pre laminated MDF board all as directed by Engineer-in-charge. (Make:- Green panel max/ Century/ Archid Ply/National Plywood).

Taking down old existing unsv back of side locker of table in any position & S&F new back of side locker made out of 6mm thick commercial BWR grade plywood (Make : Kitply Century/ Archid Ply/National Plywood)complete all as specified in drg and directed by Engr-in-charge/GE

Taking down old existing unsv brass lock of table in any position & S&F new brass lock 50mm long, 06 lever with two keys ( Make - Godrej/Harrison/Link/Plaza) to cabinet of table complete all as specified in drg and directed by Engr-in-charge/GE

S & F new hard PVC shoe/ ring of superior quality with suitable screws for fixing complete all as shown on drg including taking down complete, as directed by Engr-in-charge.

ALMIRHA MED WITH 1/2H x 1/2S ( DB-4049, 4042, FD-108)

Removing of old unsv handle from Almirah med with 1/2H x 1/2S and S&F new CP handle 125mm handle with screw and all as specified and directed by engr-in-Charge

Removing of old unsv Haps & Staple from Almirah med with 1/2H x 1/2S and S&F new SS Haps and stapple of size 75mm 1.6mm thick with screw and all as specified and directed by engr-in-Charge

Removing of old unsv hinges from Almirah med with 1/2H x 1/2S and S&F of MS hinges of 75mm to refixing of loose door to Almirha with 6 Nos MS Wood screw as shown on drg and all as specified and directed by engr-in-Charge

Refixing of loose shelves to Almirah med with 1/2H x 1/2S as shon on drg and all as specified and directed by engr-in-Charge

Polishing of wooden furniture Material and labour for removing/scrubbing of all old polished surfaces by using grinding machine & sand paper/ emary paper etc, including filling of cavities by putty/filler/sealer, preparation of old wooden surfaces by applying seina/burnt seina in uniformally and and applying two coats of french/Lacquere polish using spray machine to obtain glossy finish to the following wooden furniture items complete all as specified and as directed by Engg-in-Charge.

Almirah med with 1/2H x 1/2S (DB-4049, 4042, FD-108)

Chair Dining (FD - 279)

Chair dining JCO/Ors (FD/Map-II/05)

Chair wooden bottom w/o arms ( FD-285)

Chair Writing (FD - 280)

Chair Easy ( FD-229)

Sofa Set 05 seater (FD-281,373,258)

Peg table (FD-277/384)

Teapoy ( FD– 382)

Table writing ( FD-275)

Table centre ( FD-235/274)

Table bed side (DB-395,FD-276)

Table Dining 06 Person ( FD-273/FD/MAP-II/03 )

Table Dining 1200 x 900mm (FD-273/FD/MAP-II/03 )

Table 3'x3' ( FD-228/291)

Table 900x600 mm with Drawer (FD -283)

Table 900x600 mm without Drawer (FD -284)

Vinayak Distributors

M/S SAMAL CONSTRUCTION