PROVN OF 02 X GUARD ROOMS WITH ATTACHED TOILETS FOR 148 LT AD REGT (COMP) ALUMINIUM DOORS STAINLESS STEEL WIRE MESH SANITARY FITTINGS MPVC WALL LINING FALSE CEILING AND WHITEWASH DISTEMPER OF BLDG NO 3/5 SARDHANA ROAD, FALSE CEILING AND TILING WORK

Amount

M&L for Anodised aluminum Powder Coating (minimum thickness of powder coating 50 micron) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

M&L for Anodised aluminum Powder Coating of Approved colour (Thickness or powder coating not less than 50 micron) door Shutter, side hung type without sash bars, aluminum sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised door closer ,aluminum snap beading, screws, anodised aluminum Complete fittings including S&F 5.50 mm thick black glass complete all as specified and directed.

S&F powder coated anodised aluminum windows sliding type (3 shutter type) with sash bars, aluminum sections weighing 0.55 Kg/mtr (minimum) incl stainless steel mosquito proofing wire mesh fixed with , clips, frame , necessary joining cleats, glazing clips, neoprene rubber gasket with aluminum beading screws suitable anodised fittings such as hinges, handles, etc including powder coated anodised aluminum frame, grill with one or more rebates including S&F 5.50 mm thick black glass complete all as specified and directed.

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples including necessary beadings complete all as specified and directed.

S&F 5mm thick PVC Sheet wall Paneling (sand witched between the longitudinal grid in PVC Sheet) any pattern fixing at site with PVC beading/fillet complete all as specified and directed.

S&F GI snap grid frame work for false ceiling of size of grid 605x605mm all as specified and Hangers 6mm dia GI (up to 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specified and directed.

S&F 4mm thick asbestos cement texture building boards, fixed to timber framework or steel frame work with screw or J hooks complete all as specified and directed.

S&F plastic seat cover black/white closed pattern with flat bottom and cover and mild steel chromium plated or aluminum hinging device complete all as specified and directed.

S&F vitreous china wash hand basin white flat back, size 580x450mm including waster pipe , chromium plated waste coupling 32mm dia , bracket etc complete all as specified and directed.

S&F PVC (Plastic polymer Cistern) valve less, Symphonic action type, flushing cistern of capacity 10 liters, low level, white with inlet, ball valve, manually operated with one PVC ball valve horizontal plunger type including provision of 32mm PVC flush pipe of required length and making connections complete all as specified and directed.

S&F 15mm brass chromium plated bib cock with wall flange complete all as specified and directed. Make - Jaquar (Cat No- 5041) or equivalent.

S&F angular valve, 15mm bore dia, cast copper alloy, CP fancy type with long shank and cup (concealed type) screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified and directed.

S&F pillar taps, 15mm dia cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F vitreous china ware EWC combined pattern complete with internal fittings complete all as specified and directed. Make : Cera of Cat Part No S101314L or equivalent in Parry ware / Hind ware

S&F CP Health Faucet brass body with wall hook and one meter stainless steel braided rubber complete all as specified and directed hose pipe Cat Part No. CERA F8030301.

S&F CP brass soap dish complete all as specified and directed.

S&F Grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified and directed.

S&F PVC(SWR) floor trap, 75mm bore, plain with grating including jointing with solvent cement. complete all as specified and directed.

S&f Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S&F chromium plated towel rail 20mm dia D type 600 mm long as a approved quality complete all as specified and directed.

S&F fibre cement colored textured designer ceiling board 4mm thick of size 595x595 mm fixed to timber / GI / Aluminum frame work with screws/clips complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 (using 20mm graded stone agg) 25 mm thick for Sub base flooring complete all as specified and directed.

S&F non skid coloured ceramic tiles coloured of 7 to 8 mm (square/ rectangular ) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors set and jointed in neat cement slurry and pointed with white or colored cement over 15mm screed bed in cement mortar 1:6 complete all as specified and directed.

All as per item Srl item No 25.00 above but as in skirting over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.

S&F Coloured Glazed colour ceramic tiles in vertical surfaces 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick plaster in cement mortar 1:4 joint free with grout of matching shade complete all as specified and directed.

Excavation in trenches n exceeding1.5 m wide and n exceeding1.5 m depth in soft/ loose soil for foundation etc or for shaft, wells, manholes, pier holes etc n exceeding10 Sqm on plan and not exceeding1.5 m in depth and getting out and leveling of bottom surface to required level complete all as specified and directed.

M&L cement concrete (1:4:8) type D-2 using 40mm graded agg as in Foundations filling and mass concrete complete all as specified and directed.

M&L flat form work to sides of concrete foundations, footing bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work, veridical or to batter rough finished surface of concrete complete all as specified and directed.

M&L form work to sides of pillars posts, struts piers, columns & stanchions square rectangular or polygonal fair finished surfaces in shape complete all as specified and directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.

S&F mild steel TMT bars 10mm dia and over, cut to length bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia or securing clips complete all as specified and directed.

S&F mild steel TMT bars 6mm to 8mm dia and over, cut to length bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia or securing clips complete all as specified and directed.

M&L RCC M-25 (20mm graded aggregate) for foundation including rafts, footings, foundation beams, plinth beams, bases for columns, etc,complete all as specified and directed.

M&L RCC M-25 (20mm graded aggregate) for slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in the shelves and the like complete all as specified and directed.

M&L for providing reinforced cement concrete design mix M-25 (using 20 mm graded crushed stone aggregates) as in beams, cantilevers, bressummers, lintels over 1.5m clear span complete all as specified and directed.

M&L for providing reinforced cement concrete design mix M-25 (using 20 mm graded crushed stone aggregates) as in chajjas complete all as specified and directed.

M&L for Brickwork with fly ash bricks old size bricks straight or curved on plan exceeding 6m mean radius built in Cement mortar 1:6 complete all as specified and directed.

M&L brickwork with fly ash bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:6 complete all as specified and directed.

M&L for providing precast RCC 1:2:4 type B-1 using 20mm graded stone aggregate) as in cover slab chullah hoods, chajjas, water troughs, shelves or similar works set & jointed in cement mortar 1:4 complete all as specified and directed.

M&L for applying 15 mm thick rendering using ready mix plaster bags in cement mortar 1:6 on brick / concrete surfaces of internal walls finished even and fair, using water proofing compound @ 3% by weight of cement or as per manufacturer instructions complete all as specified and directed :- Note :- Water proofing compound shall be measured and paid separately

M&L for applying 15 mm thick rendering using ready mix plaster bags in cement mortar 1:4 on brick / concrete surfaces of external walls finished even and fair, using water proofing compound @ 3% by weight of cement or as per manufacturer instructions, complete all as specified and directed : Note:- Water proofing compound shall be measured and paid separately

Supply only integral water proofing compound complete all as specified and directed.

M&L Rendering 5 mm thick on fair faces of concrete surfaces, finished even and smooth on ceiling in cement mortar 1:3 complete all as specified.

M&L for 1 coat of prime using roller complete all as specified and directed.

M&L for Two coat of OBD using roller for painting complete all as specified and directed

M&L preparing plastered new surfaces of ceiling and applying three coats of white wash on ceiling surface complete all as specified and directed :

M&L for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces using roller for painting .

M&L Hardcore of gauge exceeding63mm but n exceeding 100 mm, deposited, spread and leveled in layers n exceeding 15 cm thick, watered and rolled/rammed to a true surface complete all as specified and directed.

M/L 75 mm thick cement concrete 1:4:8 type D-2 using (40 mm graded crushed stone agg) as in sub base complete all as specified and directed.

M&L machine cut prepolished kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with gray cement slurry mixed with pigment to match the shade of slab including rubbing and polishing up to Granite finish complete over 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed

All as per Srl item No 52.00 here-in-before but factory made bull nosed as in riser of steps, skirting/dado laid over 10mm thick in cement mortar 1:4 complete all as specified and directed

M&L Non skid ceramic coloured tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors set and jointed in neat cement slurry and pointed with white or colour cement to match including 15 mm the screed bed in cement mortar 1:6 complete all as specified and directed

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 85x45 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified & directed.

S&F 30mm thick Factory made single extruded WPC (Wood Polymer Composite) solid Moulded WPC door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk stainless steel screws complete all as specified and directed Note:- Stainless steel butt hinges and necessary stainless steel screws shall be paid separately

M&L for powder coated aluminum anodised window sliding type (3 shutters type) with sash bars, aluminum sections weighing 0.55 Kg/m(min) including stainless steel wire mesh and necessary joining cleats, glazing clips, rubber packing, anodised aluminum snap beading, screws suitable anodised fittings such as, hinges, handles, including anodised aluminum frame, grill with one or more rebates including S&F 5 to 6 mm thick black glass and complete all as specified and directed

M&L Framed work such as grills, angle grating etc. with ends of bars shouldered and or riveted or forged into spikes, framed guard bars, railings and similar work confirming to Fe-410-O or Fe-310-O, complete all as specified and directed

S&F stainless steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm complete all as specified and directed

S&F 150 mm size aluminum alloy handles cast type anodized complete all as specified & directed.

S&F 150mm long aluminum anodised barrel tower bolts of extruded section, having shoot / dia of bolt not less than 12mm complete all as specified and directed.

S&F aluminum sliding bolt 300 long bolt type with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed.

S&F heavy weight butt hinges 100mm in size complete all as specified and directed.

Supplying and laying CPVC 20mm outer dia pipes SDR 11 & Plain CPVC SDR 11, with all fittings and fixed on walls/ceiling or laying in floors complete all as specified and directed.

Supplying and laying CPVC 25mm outer dia pipes SDR 11 & Plain CPVC SDR 11, with all fittings and fixed on walls/ceiling or laying in floors complete all as specified and directed.

S&F triple layer white color 500 Ltrs Rotational moulded polyethylene (PVC) water storage tanks cylindrical vertical with closed top including nipple nuts and washers for fixing inlet, outlet/washout pipes and air vent pipes and incl dismantling water tanks any type & removing complete all as specified and directed.

S&F 20 mm dia ball brass valves, high pressure with polythene float and fly nut complete, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F bib taps brass chromium plated 15 mm bore size screwed down screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F 15 mm dia stop cock/angle cock cast copper alloy chromium plated screwed down high pressure with crutch or butterfly handle, flinch screwed both ends for iron or for union complete all as specified and directed.

S&F vitreous china squatting pan ‘Orrisa pattern’ size 580 x 440 mm white with integral foot rest including replacement of ‘P’ or ‘S’ trap lime concrete bedding and making good floor complete all as specified and directed.

S&F Vitreous China wash basin including pedestal, white, flat back, size 550 x 400 mm, including fixing accessories like galvanised brackets & rag bolts,32 mm CP waste coupling complete all as specified and directed.

S&F 10 liter capacity PVC valve less, Symphonic action type, flushing cistern low level, white with inlet ball valve, float and handle including brackets and PVC flush pipe etc complete all as specified and directed.

S&F PVC (SWR) floor trap, 75mm bore, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F PVC (SWR) gully trap, 110mm bore, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F PVC connections of 450mm long suitable for 15mm dia iron pipe including PTMT nuts complete all as specified and directed.

S&F 75mm bore PVC Pipes single socketed in any length with rubber ring joints, fixed to walls and floor etc. as in waste complete all as specified and directed.

S&F 110mm bore PVC Pipes single socketed in any length with rubber ring joints, fixed to walls and floor etc. as in waste and rain water pipes complete all as specified and directed.

S&F PVC bends 75mm bore, any radius complete all as specified and directed.

S&F PVC bends 110 mm bore, any radius complete all as specified & directed.

S&F 110mm PVC (SWR) vent cowl complete all as specified and directed.

S&F 110 PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

S&F 110mm PVC (SWR) 'S' trap complete all as specified and directed.

S&F stack clamps out of 50 mm by 5 mm flat iron and 16 mm dia round iron stays including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed.

S&F gun metal globe valves, 15mm dia, with iron wheel head ,screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified and directed.

S&F gun metal globe valves, 20mm dia, with iron wheel head ,screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified and directed.

S&F Grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified and directed.

S&F for Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S&F for brass chromium plated towel rail 20mm dia D type 600 mm long as a approved quality complete all as specified and directed.

S&F pillar taps cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘hot’ or ‘cold’ with long screwed shanks and fly nuts, screwed for iron pipes 15mm bore complete all as specified and directed.

M&L for 50mm thick average thickness of PCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregates) finished even and fair without using extra cement complete all as specified and directed.

M&L for 10mm thick cement plaster in CM 1:4 mixed with WPC @ 2 % by weight of cement finished even and smooth without using extra cement on roof surface when concrete is green and wall (WPC will be measured and paid separately as supply only rate) complete all as specified and directed.

M&L for surface Preparation: The surface to receive the treatment shall be thoroughly free of laitance, scales, oil or any other loose material. It should be made free of any sharp objects. Cleaning of PCC shall be done with wire brushing to attain smooth leveled surface. Cracks shall be rectified, filled using dual shrinkage compensated Repair Mortar and dried for 72 hours before laying the liquid applied membrane. First apply the bonding coat of Multi-Purpose Polymer 5-10% diluted in water and add to cement slurry. Apply the bonding slurry and apply the polymer mortar over the sharp edges.

Note: Grouting will be done when and where ever required. Treatment of pipe entry points: Preparing the inside surface of core and PVC /MS Pipe by roughening using suitable Sand paper to get better adhesion prior to packing works. Cleaning the surface by wire brushing followed water jet to remove any laitance or loose flaky particles. Packing the gap using free flowable non shrink cement polymer based grout up to the surface of the bore while the bonding agent is in tacky state. the periphery of PVC pipe should be sealed with Hybrid PU Sealant or dual shrinkage compensated Micro concrete Note: Will be done when and where ever required Application of Asian Paints two component Epoxy Primer (Resin & Hardener) on the cleaned surface for bonding of Polyurethane with the existing concrete surface. 33 % water dilution is recommended with the pure mixed primer. The primer mixing ratio will be 1:3(Resin:Hardner) Supplying, providing and applying waterproofing treatment to Podium area with single component highly elastomeric seamless cold applied modified PU coating complete as per manufacturer’s specifications and application methodology. The same coating shall be applied in two coats achieving a total thickness of 1mm. The coating shall have a dual combination of 280% elongation. Material coverage 1.2kg /sq. mt. Note:- Contractor is required to deposit 100% CA quantity to the Engr-in-Charge, within 15 days of acceptance of contract.

S&F for High density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc complete all as specified and directed.

M & L for anti termite Treatment the soil under plinth protection at the rate of 5 liters of emultion per square meter of surfaces area.

M&L injecting chemical emulsion for Post Constructional Anti-termite Treatment Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 liters per linear meter including drilling and plugging holes etc. in apron complete all as specified and directed.

S&F, factory made, steel ventilators with top and side hung shutter including hinges, steel peg stay, glazing bars including applying one shop coat of red oxide primer complete all as specified and directed.

M&L for 3mm thick figured glass, pin headed type and glazing with oil putty in square not exceeding 0.5sq.m in each pane complete all as specified and directed.

M&L for preparation of new steel surface of any description exceeding 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

Removing excavated soil n.exceeding50m and depositing where directed at a level n. exceeding 1.5 m above the starting point complete all as specified and directed.

Returning filling in, including spreading levelling, watering and well ramming in layers not exceeding 25 cm in hard dense soil complete all as specified and directed.

M&L for SGSW 'grade 'A' drain pipe 200 mm internal dia laid in trenches , jointed and tested complete all as specified and directed.

M&L for SGSW 'grade 'A' drain pipe 150 mm internal dia laid in trenches , jointed and tested complete all as specified and directed.

M&L concrete bed to drain pipes including packing under, and hunching against the sides of pipes after they are laid and tested in cement concrete 1:4:8 type D2 for 150 mm dia pipe work in foul position complete all as specified and directed.

M&L concrete bed to drain pipes including packing under, and hunching against the sides of pipes after they are laid and tested in cement concrete 1:4:8 type D2 for 200 mm dia pipe work in foul position complete all as specified and directed.

M&L for precast RCC 1:2:4 type B-1 (using 20mm graded stone aggregate) for manhole cover including placing and set in CM 1:6 complete all as specified and directed.

M&L for PCC 1:3:6 type C1 using 20mm graded stone aggregate as in bed bricks, coping etc including weathering slightly rounded or chamfered angles and threading making groves for fixing of man hole cover including necessary form work complete all as specified and directed.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement including finishing the top of benching even and smooth using extra cement (forming channel shall be measured and paid for separately) complete all as specified and directed.

M&L preparing plastered new surfaces of wall and applying three coats of white wash on wall surface complete all as specified and directed.

M&L for chequered cement concrete colour tiles size 300mm x 300mm x 25mm thick with colour pigment set, jointed and pointed in neat cement slurry over and including 20mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M&L for point wiring with 1.5 Sqmm (nominal cross section area) single core, multi stranded PVC insulated, unsheathed copper conductor, FR cable in and including in rigid pvc conduit 20 mm dia or higher medium grade ISI marked complete with all PVC Conduit accessories / fittings and sunk pressed (1.2 mm thick) steel terminal switch boxes with 3 mm thick plastic laminated hard glossy surface sheet top cover, including earth wire continuous of PVC insulated, unsheathed 1.5 Sqmm copper conductor, PVC insulated connected to all fittings, sunken boxes and common earth, earth dolly. Plastic sheet screwed with brass screws, cup washers for One light/Bulb/ street light point controlled by one, one way switches 5/6 Amps complete all as specified and directed

All as per Srl item No 110.00 here-in-before but One 3 pin 5/6 Amps socket outet point on independent board, controlled by one, one way 5/6 Amps switch complete all as specified and directed.

All as per Srl item No 110.00 here-in-before but One 3 pin 5/6 Amps socket outet point on same board, controlled by one, one way 5/6 Amps switch complete all as specified and directed.

M&L for point wiring with 2.5 Sqmm (nominal cross section area) single core, multi stranded PVC insulated, unsheathed copper conductor,FR, cable in and in rigid pvc conduit 20 mm dia or higher medium grade ISI marked complete with all PVC conduit accessories / fittings and sunk pressed (1.2 mm thick) steel terminal switch boxes with 3 mm thick plastic laminated hard glossy surface sheet top cover, including earth wire continuous of PVC insulated, unsheathed 2.5 Sqmm copper conductor, PVC insulated connected to all fittings, sunken boxes and common earth, earth dolly. Plastic laminated sheet screwed with brass screws, cup washers complete all as specified and directed for the following :- (a) One 3 pin socket outlet, 15 amps, with cables 2.5 sqmm size on independent board, controlled by one, one way 15 amp switch.

S&F Switch piano flush button single pole one way 5 amp complete all as specified and directed.

S&F Socket outlet 3 pin, 5 Amps, flush type complete all as specified and directed.

S&F Switch piano flush button single pole one way 15 amp complete all as specified and directed.

S&F Socket outlet 3 pin, 15 Amp, flush type complete all as specified and directed.

S&F ceiling rose, surface type, Bakelite, 65 x 50 mm, three terminal complete all as specified and directed.

S&F LED lamp 9 W 6500k, 240V complete all as specified and directed.

S&F lamp holder insulated body with back plate fix done anodised 100 x 100 mm pressed steel box flush to the wall with 3 mm thick back light cover complete all as specified and directed.

S&F LED tube light fitting T/5 surface mounting poly carbonate 240 volts 20 watts, 6500K complete all as specified and directed.

M&L for Building security light fitting 1 x 35 LED type, drawn through and including GI bracket of size 25 mm dia bore light grade 1.4 mtr long, bend to shape including MS clamps made out of flat iron of size 32 x 4 mm - 02 Nos and necessary nuts, bolts, washer as required complete all as specified and directed.

S&F sheet metal enclosure single pole & neutral for 240 volts 8 way with 200 Amp rated bus bar flush /surface mounting double door complete all as specified and directed.

S&F MCB single pole 240 volt 6 to 32 amps 10 KA complete all as specified and directed.

S&F Ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.

S&F XLPE insulated armoured heavy duty electric cable with aluminum conductor 1100 volt grade cross sectional area of 16 sqmm 2 core complete all as specified and directed.

M&L for sub main wiring with 06 Sqmm nominal cross sectional area, two single core, 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor cable with and including continuous earth wire of size 06 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable drawing into and including rigid non metallic PVC concealed conduit of 25 mm dia, medium grade with all conduit accessories / fittings, brass screws, washers etc and connected to common earth dolly including taking down old u/s wiring & incl all cutting / chases etc in wall, making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing complete all as specified and directed.

S&F Isolator DP 40 Amp ,240 Volts, suitable for fixing in MCB DB 'C' series in DB complete all as specified and directed.

M&L for Earthing complete with galvanised steel earth plate electrode 600x600x6mm thick, buried directly in ground (earth pit not less than 2.25 Mtr deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to galvanised earth lead white 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 connected to earthing test point all as specified or indicated including testing on completion complete all as specified and directed.

S&F Exhaust fan, steel body AC single phase, 230V of size 300 mm sweep with blades, frame and louvers complete all as specified and directed.

S&F Water heater storage type steel body with copper inner tank and heating element up to 2KW capacity 25 ltr, BEE 5 stared complete with a rating including providing of hold fast in wall and PVC connection 45 cm long with 15 mm dia brass union at both end heavy duty complete all as specified and directed.

SA construction co.

AMBEY CONSTRUCTION

Manglam Engineers and Construction Co

Arun Construction Co.

Rajneesh Jain

B.K.construction