PROVN OF GREASE TRAP FOR COOK HOUSE AND GLASS FOR RAILINGS AT 6 AFH

Amount

Excavaion in trenches, n.exc 1.50m width & n. exc 1.5m depth and getting out in Soft/disintegrated soil.

M & L for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundation

M & L pre cast cement concrete 1:3:6 type C1 using 20 mm graded stone agrregate as in block masonry set in CM 1:6 exc 10 cm in width complete all as specified

M & L precast cement concrete 1: 2:4 type B1 in in landings, for fixing cover slabs frame (for manholes etc.) with plain faces and setting in mortar 1:4 complete with joints to match

M & L PCC (1:3:6) type C-1 (using 20 mm graded stone aggregate) as in coping including weathering, slightly rounded or chamfered angles and necessary form work complete all as specified.

Material and labour 15mm thick cement plaster in CM 1:4 for wall finished even & smooth without using extra cement, WPC shall be measured and paid separately..

Supply only Liquid water proof compound

M&L for bars 10mm dia for handles confirming to Fe 290 Gde E-165

M & L for Hard drawn steel wire fabric exc 4kg /sqm cut to lengths, bent to shape required and tying with and including mild steel wire (annealed) not less than 0.9mm in dia supplied and fixed in reinforcemnt

Returing and filling in including spreading levelling , watering well ramming in layers not exc 25 cm in soils

M&L for Removing excavated material to a distance n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point

S&F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed in wall/ floor with necessary clamping where required

S&F 110 mm dia PVC vent cowl all as specified

S&F 600 x 600 mm FRP Manhole cover with frame to with stand load 5MT, all as specified and directed. Make : Prince (DURAFIT) or equivalent

Dismantling/ cutting of structural steel/SS work including doors, gates, railings and the like etc and making good of existing portion with necessary rubbing and polishing all as specified and directed.

S & F 12mm thick Toughned glass as in railings, hinged doors, partitions, automatic doors and similar work including cutting to shape, drilling holes into conrete surfaces required including holding clips (side holding/ bottom holding) vertically or horizontally and necessary fittings/ frames, screws/ fasteners etc all as specified and directed

Material & Labour for providing and fixing mirror polishing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts, caps etc., of required size, on the top of floor or the side of waist slab with suitable arrangement. all as specified and directed

Drilling holes for bolts, pipes, etc. exc 25mm but not exc 60mm dia on concrete/ block masonry surfaces on floors/ ceilings/ walls

M & L Forming holes, n exc. 50 cu cm for balusters, railings, newels, rag-bolts, etc. and grouting mixed with cement mortar 1:2 with necessary anchor chemical after bolts,balusters/ railings, etc. are fixed as specified by Engr in charge

Excavating in trenches n exc 1.5m wide and deep getting out for foundation not exc 10 Sqm on plan and not exc 1.5m deep and getting out in hard/dense soil.

M&L for cement concrete type C-1 1:3:6 (20mm graded aggregate) a in coping, benching concrete in manholes including necessary Use and waste of Form work etc complete.

M&L PCC block masonry type C1 1:3:6 (20mm graded aggregate) exc 10 cm in width and setting in mortar 1:4 complete.

Supply only integral water proofing compound

M&L for precast reinforced concrete type B-1 1:2:4 (20mm graded aggregate) set in cement mortar 1:4 as in cover slabs.

M&L for TMT bars 5mm dia and over and upto and including 10 mm dia cut to length bent to shape required including cranking bending and binding with MS wire not less than 0.90mm dia.

M&L for bars 12mm dia for handles confirming to Fe 290 Gde E-165

M&L for PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in bed to drain pipes 150mm dia including packing under and haunching against the sides of pipes after they are laid and tested all as specified.

M & L PVC (SWR) 150 mm dia laid and jointed complete with collars

Returning filling in including spreading levelling and well ramming in layers not exc 25 cm in hard soil.

Removing excavated material not exc 50m and depositing where directed at a level not exc 1.5 m above the starting point.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement including forms, mounds etc.

Cutting exising manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel(1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required.

SEMBA ELECTRICALS (BID ID -3442175)

TECKXPERT ENTERPRISES (BID ID -3440697)

P JAYAPATHY & C0 (BID ID -3441538)

MSR ENTERPRISES (BID ID -3442653)

K C ASSOCIATES (BID ID -3442469)

UNIQUE INDIA CONSTRUCTIONS (BID ID -3442374)