GE (N) P/TOKEN- 49 OF 2024-2025REPAIR/ RENEWA REPAIR/ RENEWAL/ MAINTENANCE OF GI/CI/DI WATER PIPE ALONG WITH CONNECTED ITEMS AT VARIOUS WATER SUPPLY INSTANS AT GHORPADI VR TEST AUDIT COLONY,HQCESC HQCEPZ IN THE AREA OF AGE E/M (N) UNDER GE (N) PUNE

Amount

M&L for repairs/rectification of leakage in UG cast/ductile/ductile iron pipe lead joint by caulking lead wool/ pig lead complete including excavation and earth work for exposing the joints and working space on the site, returning filling in and making good to the existing earth level of the surroundings after repair for the following sizes of pipes all as specified and directed. Note:(a) Cost of excavation, returning, refilling is deemed included in the quoted rate. (b) lead wool / pig lead shall be measured and paid separately.

80 mm dia bore

100 mm dia bore

150 mm dia bore

200 mm dia bore

M&L for Run lead joint of cast/ductile iron pipes of size 80mm dia bore all as specified and directed by Engr-in-charge.

M&L for Run lead joint of cast/ductile iron pipes of size 100mm dia bore all as specified and directed by Engr-in-charge.

M&L for Run lead joint of cast/ductile iron pipes of size 150 mm dia bore all as specified and directed by Engr-in-charge.

M&L for Run lead joint of cast/ductile iron pipes of size 200mm dia bore all as specified and directed by Engr-in-charge.

Taking up and relaying cast/ductile iron water mains (including all fittings), with spigot and socket ends and lead joints inluding burning out joints with recovering lead and setting aside for reuse or remove to MES store including all necessary earth work ,refilling and removal of following sizes:- Note :Necessary excavation and earthwork will be measured and paid separately under relevant item

80 mm dia bore

100 mm dia bore

150 mm dia bore

200 mm dia bore

Supply, laying, jointing and testing in repairs of ductile iron (DI), pressure pipes with spigot and socket ends, centrifugally cast, class K-9, with cement mortar lining in inner side as per IS:8329/2000 (latest revision) and other relevant standards and metallic zinc coating followed by a finishing layer of epoxy paint in outer side, suitable for push on joint (rubber gasket joint) in any length with inside cement mortar lining laid in trenches complete all as specified an as directed for the following bores . Make:Electrosteel,Kejriwal,Kesoram,NECO,TISCO

80 mm dia bore

100 mm dia bore

150 mm dia bore

200 mm dia bore

Material and labour CI Fittings such as bends (any type radius and angle), tapers any type, (straight, bend, increasing, decreasing or double socket etc.) tee pieces, single branch 'Y' junction, double branch, cross (all sockets or socket & spigot), collars, caps & plugs etc for spigot and socketed CI pipes of size upto 150mm bore all as specified.Make:Electrosteel,Kejriwal,Kesoram,NECO,TISCO

Material and labour CI Fittings such as bends (any type radius and angle), tapers any type, (straight, bend, increasing, decreasing or double socket etc.) tee pieces, single branch 'Y' junction, double branch, cross (all sockets or socket & spigot), collars, caps & plugs etc for spigot and socketed CI pipes of size more than 150mm to 200 mm bore all as specified.Make:Electrosteel,Kejriwal,Kesoram,NECO,TISCO

Supply and fix in repairs Mechanical joint of made out of CI/DI/MS of fabricated as per existing site requirement including long MS nut, bolt, rubber gasket, cutting/fixing of pipe in position of any size CI/MS/AC pipe with the help of manually as well as mechanical T&P complete all as directed by Engr-in-Charge of following sizes :-

80 mm dia bore

100 mm dia bore

150 mm dia bore

200 mm dia bore

Supply and fix in repairs mild steel connecting pieces one end flanged and other threaded including two coat of anticorrosive paint and taking up/down old unserviceable connecting piece complete including necessary nuts, bolts and rubber packing material for the size of pipes upto 200 mm bore all as specified and directed.

M&L for Angle Iron,flat iron etc as in broken or unserviceable cross arms, brazings, supports, clamps and back plate fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of paint.

Supply and fix in repairs ball type foot valve for GI/MS water supply line with necessary nut,bolts ,rubber gasket, washer etc incuding necessary welding etc having alteration at site for following sizes:- Make: Venus ,Leader,Kirloskar,Sant,Audco

Taking up ,Repair , servicing and refixing of Foot valve including repalcement of nut,bolts, gaskets ,removal of scaling etc and repainting the same

50 mm dia bore

80 mm dia bore

100 mm dia bore

150 mm dia bore

Supply and fix in repair ball type non return valve of following size cast/ductile iron body with by-pass arrangement confirming to IS with jointing and jointing materials all as specified.Make:Kirloskar,Normax,Zoloto

200 mm dia bore

150 mm dia bore

100 mm dia bore

80 mm dia bore

Supply and fix in repairs Swing type horizontal /vertical type spring loaded gunmetal non return valves having rubber seat ISI marked both side threaded for cold water for the given sizes:- Make: leader,Zoloto,GEM,Sant

(i) 40 mm bore

(ii) 50 mm bore

(iii) 80 mm bore

Repair and servicing of non return valve of following size cast/ductile iron/ bronze body with by-pass arrangement by replacement of rubber seat,greasing of hinges,repacement of u/s nut bolts of ms,SS springs,PVC spindle etc.

200 mm dia bore

150 mm dia bore

100 mm dia bore

80 mm dia bore

50 mm dia bore

40 mm dia bore

M&L for repair for taking out and re- facing, re-grinding and re- fixing,replacing of brass checnut, repacking stuffing box of sluice valve spindle, including taking apart and reassembling complete all as specified and directed. Note: After taking off the sluice valve for repair necessary alternate arrangement for contyrlling water distribution has to be made by Contractor and the rate quoted deemed to be included.

80 mm dia bore

100 mm dia bore

150 mm dia bore

200 mm dia bore

S&F in repair in position sluice valve confirming to IS 780 /IS 14846 – 2000 PN,1.6 flanged and S/S spindles with cap & handle opening arrangement of sizes given below incl taking down existing sluice valve and deposited to E/M store yard. Make : SIR/KIROSKAR/LEADER

80 mm dia bore

100 mm dia bore

150 mm dia bore

200 mm dia bore

Taking up or down and then refixing steel tubing and connections including cleaning for refixing or remove to MES store of following sizes.

15 MM Bore

20 MM Bore

25 MM Bore

40 MM Bore

50 MM Bore

80 mm bore

100 mm bore

Supply and lay in repairs medium grade galvanized pipe with all fitting such as tee, bends, union elbow reducerin trenches, walls, roof etc :- Make:Tata,Jindal,Prakash Surya

15 mm bore

20 mm bore

25 MM Bore

40 mm bore

50 MM Bore

80 mm bore

100 MM bore

Taking down and refixing of old PPR tubing and connections in new or old position on walls, ceiling, floors etc including required fitting such as tee, bends, union elbow reducer et all as specified and directed at site for following sizes :-

20 MM Bore

25 MM Bore

32 MM Bore

50 MM Bore

63 MM Bore

Taking down and Supply and fix gun metal gate valve, cast/ductile screwed down, High pressure with iron wheel handle , Screwed both ends for iron pipe or unions of the following sizes :- Make: leader,Zoloto,GEM,Sant

15 mm bore

20 mm bore

25 mm bore

40 mm bore

50 mm bore

80 mm bore

Supply and fix in repairs 3- layer PP-R Polypropylene random copolymer) pipes SDR 7.4 & SDR11 UV of following sizes fixed complete to walls, ceilings or in floors,laid in trenches etc. with all fitting such as tee, bends, union, elbow reducer, pasting adhesive materials etc with outer dia of pipe in mm :- Make:Finolex,Prince,Kisan,Supreme

20 MM Bore

25 MM Bore

32 MM Bore

50 MM Bore

63 MM Bore

Making connection of PP-R distribution branch with PP-R main of following sizes by providing and fixing tee including cutting and making fusion joint etc. for sizes 16 mm to 40 mm dia(outside)

Making connection of PP-R distribution branch with PP-R main of following sizes by providing and fixing tee including cutting and making fusion joint etc. for sizes 50 mm to 75 mm dia(outside)

Supply and fix in repairs PP-R gate valves (brass insert ) including taking down of existing unserviceable valve complete all as specified and as directed for the following outer dia Make:Finolex,Prince,Kisan,Supreme

20 MM Bore

25 MM Bore

32 MM Bore

50 MM Bore

63 MM Bore

S & F in repairs Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe of bore 25 mm including necessary fittings Make:Finolex,Astral,Supreme Note:The rates include for pipes including short lengths, with all pipe fittings such as bends, elbows, unions, tees, reducing tees, adoptors, sockets, plugs, hose clips etc. and fixing to walls etc, complete with saddles (snap clips), wall clips, hooks, protective mild steel tube sleeves and cutting through walls, floors and their making good or laying in trenches and also cutting, screwing and waste.

S & F in repairs Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe of bore 50 mm including necessary fittings Make:Finolex,Astral,Supreme Note:The rates include for pipes including short lengths, with all pipe fittings such as bends, elbows, unions, tees, reducing tees, adoptors, sockets, plugs, hose clips etc. and fixing to walls etc, complete with saddles (snap clips), wall clips, hooks, protective mild steel tube sleeves and cutting through walls, floors and their making good or laying in trenches and also cutting, screwing and waste.

S & f in repairs 25 mm bore UPVC ball valves with long operating handle ON UPVC pipe line Make:Finolex,Astral,Supreme

Demolition of concrete of any description and in any position not otherwise specifically provided and throwing the rubbish with in 50mtrs complete all as specified and directed by Engineer in charge.

M&L for PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) for coping including necessary formwork as required complete all as specified and directed by Engineer in charge.

M&L for PCC 1:2:4 type B-2 (using 40 mm graded stone aggregate) for Cement concrete in foundations, filling and mass concrete including necessary formwork as required complete all as specified and directed by Engineer in charge.

M & L for broken stone/ boulders hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface including taking up old old unserviceable one complete all as specified and directed by Engineer in charge.

M&L for running welding of thickness n'exc 6mm in repairs complete all as specified and directed by Engineer in charge.

Excavation in trench not exceeding 1.5 Mtr in depth and not exceding 1.5 Mtr in width and getting out in hard dense soil.

Excavation in post holes (or similar holes) each n.exc. 0.50 Cum, getting out, returning, filling in and ramming earth or borken rubble mixed with earth around, in layers n.exc. 25 cm thick in hard/ dense soil complete all as specified and as directed.

Returning filling in including spreading, levelling, watering and well ramming in layers not exceeding 25 cms by using excavated soil.

Removing surplus soil to a distance not exceeding 50 m and depositing where directed at level not exc. 1.5 m above starting point.

Demolition of old u/s Brickwork or stone/boulder masonry but built in cement mortar or cement lime mortar

Taking down cement plaster of any thickness and removing from site to a distnace exc 50 metre but not exc. 100 metre all as directed.

M&L for brick masonry with fly ash bricks exc 6 meter mean radius in cement mortar 1:6 all as specified and directed.

M&L for rendering with 15mm thick in cement mortar 1:4 on fair surfaces of brick or concrete surafaces finshed even and smooth surfaces without using extra cement and all as specified and directed by Engr-In-Charge.

M&L for preparation of old painted surface and then painting with synthetic enamel paint of first quality paint two coats (02 coats) to surfaces of valve chamber covers, pipe line,LT panels and external surfaces of pump motor complete all as specified and directed by Engr-in-charge.Make:Asian Paints,Nerolac Paints,Berger Paints,Shalimar Paints

Supply only in repairs Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of paint

Supply and fix in repairs mild steel "B" class pipes confirming to r IS-1239 part-I including necessary fittings such as bends ,tees, flange etc and applying redoxide primer and two coats of ynthetic enamel paint after being welded for the following sizes of pipes:-

(i) 50 mm bore

(ii) 80 mm bore

(iii) 100 mm bore

(iv) 150 mm bore

(iv) 200 mm bore 5 mm thick

Material and labour for attending the emergent complaint and repairs to leakage/ damage GI pipe of size 15 mm to 25 mm bore including carrying out minor repairs etc as required to make the system in order/ functional and necessary excavation ,returning filling of soils and removal of water by using pump, cutting out GI pipe at both ends and jointing with new fittings, accessories such as union, sockets, Tee, Tee reducer etc complete all as specified and as directed. Note: (i) Rate inclusive of jointing of and earth work, GI fittings etc.

Material and labour for attending the emergent complaint and repairs to leakage/ damage GI pipe of size 40mm to 50 mm bore including carrying out minor repairs etc as required to make the system in order/ functional and necessary excavation ,returning filling of soils and removal of water by using pump, cutting out GI pipe at both ends and jointing with new fittings, accessories such as union, sockets, Tee, Tee reducer etc complete all as specified and as directed. Note: (i) Rate inclusive of jointing of and earth work, GI fittings etc.

Material and labour for attending the emergent complaint and repairs to leakage/ damage GI pipe of size 80mm bore including carrying out minor repairs etc as required to make the system in order/ functional and necessary excavation ,returning filling of soils and removal of water by using pump, cutting out GI pipe at both ends and jointing with new fittings, accessories such as union, sockets, Tee, Tee reducer etc complete all as specified and as directed. Note: (i) Rate inclusive of jointing of and earth work, GI fittings etc.

M & L for fixing in repairs boxes fabricated out of GI sheet of thickness not more than 2mm for covers of inline booster pumps, tullu pumps , centrifugal pumps,starter panel boxes etc all as directed and specified by Engineer in charge.

Supply and fix in repairs Generic Water Sprinkler Lawn and Garden Irrigation Spit Plastic Pulsating Watering Device having fixing dia of 20 mm Evenly water spraying, angle adjustable, high efficiency, water-saving, long range watering

Supply and fix in repairs Generic Water Sprinkler Lawn and Garden Irrigation Spit Plastic Pulsating Watering Device having fixing dia of 15 mm Evenly water spraying, angle adjustable, high efficiency, water-saving, long range watering

Supply and fix in repairs plastic POP UP Sprinkler with 10 FEET Cover NOZZEL having dimensions 8 x 16 x 8 Centimeters Make Vasudha

Supply and fix in repairs Bib tap standard with dia 15 mm bore made of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/20mm- 125gms).

Supply only chain link MS galvanised fencing any size or type complete all as specified and as directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc., including provision of binding wire complete all as specified and as directed.

S & F in repairs for Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E 165 complete all as specified & as directed.

S&F in repairs framed work such as grill,channel, valve chamber cover, grating ,etc,with end of bars shouldered and/or riveted,or forged in to spikes, framed guard bars, flat iron, angle, barred iron doors, ladder, framed balusters,walk ways,railings,framework of water tanks and and similar work GDE Fe-410-0 or Fe-310-0, Note : Work may involve fixing of frames and other iron work on RCC overhead tanks above 30 m or more from the ground level.Rate of the same is deemed included in the quoted rate

Supply and fix in repairs Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut of dia 5 to 10 mm, exec 10 cm n exc 15cm long complete all as specified and as directed.

Supply and fix in repairs Mild steel round bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clip complete all as specified and as directed.

Supply and fix in repair for machine pressed precast concrete interlocking paver block of red/colour and any shape and size confirming to IS -15658-2006 of 60 mm thickness M-35 grade with grey cement and no pigment including 40mm sand /stonedust cushioning with neceesary excavation etc complete all as specified and as directed.

Supply and fix in repairs for Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat grey cement with no piment slurry in floors including 40mm sand /stonedust cushioning with neceesary excavation etc complete all as specified and as directed.

Supplying and fix in repairs of 150 mm bore CPVC pipes schedule 80 & Plain CPVC schedule 80 fittings on different borewell over existing casing using necessary adhesive

Material and labour for cutting existing road/hard standing for taking out pipe /making new connection and making good with PCC (1:2:4) type C 1 (using 20 mm graded broken stone aggregate) surface finished even and fair complete all as specified and as directed.

Supply and fix on replacement on-line pressure boosting pump, outdoor, weather proof electrically operated 240 volts, 50 Hz fixed to 15/20 mm dia of capacity Head 10 mtrs Flow rate-35 LPM power input 0.1 KW with three opearting position OFF/AUTO/MANNUL and componants of ceramic radial Ball Bearing, copper stator winding, EPDM rubber gasket, Aluminium oxide Shaft, carbon trust Ball Bearing, composit PP30% GF impeller including the integrated flow switch starts or stops the pump when a tapping point is turned on or off including, electrical connections, relaying of pipe lines, GI fittings, and removal of old unsv one complete all as specified and as directed. Make Wilo cat no.PB88,Kirloskar,KSB

Supply and fix on replacement on-line pressure boosting pump, outdoor, weather proof electrically operated 240 volts, 50 Hz fixed to 15/20 mm dia of capacity Head 16 mtrs Flow rate-50 LPM power input 0.2 KW with three opearting position OFF/AUTO/MANNUL and componants of ceramic radial Ball Bearing, copper stator winding, EPDM rubber gasket, Aluminium oxide Shaft, carbon trust Ball Bearing, composit PP30% GF impeller including the integrated flow switch starts or stops the pump when a tapping point is turned on or off including, electrical connections relaying of pipe lines, GI fittings, GI fittings and removal of old unsv one complete all as specified and as directed. Make Wilo cat no. PB 200,Kirloskar,KSB

Supply and fix on replacement water lifting and booster pump 1.5 Hp single phase suction with necessary factory fabricated auxillary tank and discharge,( 25 mm x 25 mm ) total head upto 10-42 mtr, capcity upto 75 - 6 LPM monoblock, multiple noryl/brass impellar pump type suitable for 230 volts with all necessary fittings including copper cable upto 5mtr.Including removol of old unsv one complete all as specified and as directed Make kirloskar CPBS 84424H/V,KSB KSB KHM 406,Texmo ADBS 44 HS / 60L

M&L for scrapping and removing old paint, stains, loose materials and algae-fungus growth then cleaning of surface with water using pressure washer machine, fill the crack with acrylic based textured cack filler and applying two coats of modified acrylic exterior emulsion paint of approved shade having silicon additives in paint over a coat of primer cum sealer having alkali resistance property diluted with water and mixed with bio block in ratio of (5:4:1) on the surfaces of pump house buildings etc complete all as specified and as directed. Make Of paints and primer: Berger Weathercoat Floor protector,Asian apex floor guard,Dulux Floor plus

Supply and fix in repairs the following items :

Supply and fix in repairs GI union of size 40 mm dia.

Supply and fix in repairs GI union of size 25 mm dia.

Supply and fix in repairs GI union of size 20 mm dia.

Supply and fix in repairs GI union of size 15 mm dia.

Supply and fix in repairs MS plug of size 15 mm dia.

Supply and fix in repairs MS plug of size 20 mm dia.

Supply and fix in repairs MS plug of size 25 mm dia.

Supply and fix in repairs MS plug of size 40 mm dia.

Supply and fix in repairs MS plug of size 50 mm dia.

Supply and fix in repairs GI Socket/ reducer of size 40 mm dia.

Supply and fix in repairs GI Socket/ reducer of size 25 mm dia.

Supply and fix in repairs GI Socket/ reducer of size 20 mm dia.

Supply and fix in repairs GI Socket/ reducer of size 15 mm dia.

Supply and fix in repairs GI nipple heavy duty of size 40 mm dia. 100mm length

Supply and fix in repairs GI nipple heavy duty of size 25 mm dia. 100mm length

Supply and fix in repairs GI nipple heavy duty of size 20 mm dia. 100mm length

Supply and fix in repairs GI nipple heavy duty of size 15 mm dia. 100mm length

Supply and fix in repairs GI Elbow/ Tee equal/ Tee reducer of size 40 mm dia.

Supply and fix in repairs GI Elbow/ Tee equal/ Tee reducer of size 25 mm dia.

Supply and fix in repairsGI Elbow/ Tee equal/ Tee reducer of size 20 mm dia.

Supply and fix in repairsGI Elbow/ Tee equal/ Tee reducer of size 15 mm dia.

Supply and fix in repairs GI double nipple heavy duty of size 40 mm dia.

Supply and fix in repairs GI double nipple heavy duty of size 25 mm dia.

Supply and fix in repairs GI double nipple heavy duty of size 20 mm dia.

Supply and fix in repairs GI double nipple heavy duty of size 15 mm dia.

Note : 1. Performance security:- Refer Condition 22 of Special Conditions. 2. Quoted Contract Sum shall be arrived at after deducting the amount of Credit Schedule (refer Schedule of Credit in pdf form for quantity, rate and amount etc.) for old unserviceable materials retrieved from site.

purva engineears and contracters (BID ID -3246190)

Chaulya Enterprises (BID ID -3252752)

GANGA ENTERPRISES (BID ID -3246812)