MLA 2023-24 KMB-1

Amount

Earth work excavating and deposting on bank with initial lead of 10m& intial lift of 2m in hard stiff clay, stiff black cotton, hard red earth shales ,murram, gravel, stoney earth mixed with small size boulders etc completed as per std specification.

Cement Concrete 1:4:8 mix (one cement four sand and Eight aggaregate) using 40mm ISS HBG stone jelly for foundation and flooring including cost and conveyance of materials and labour charge etc complete as per std specification.

Steel centering for side and sifits including supports and strutting upto 1m height for plain surface such as RCC slab with all cross bracings using mild steel sheet of size 90cmx60cmx10 gauge stiffened with welded miled steel angles of size 25x25x6mm for laid over silver oak for coundary wood joints of size 10x6.5 cm spaced at about 90cm centre to centre and supported by casurials props of 10cm to 13 cm dia spaced at about 75cm centre to centre and suppor etc completed as per std specification.

Brick work in cement motor 1:5 mix(one cement and five sand) using 2nd class country brick of size 83/4"x41/4"x23/4" including curing finishing and cost and conveyance of materials and labour charge etc complete as per std specification.

Reinforced Cement concrete of mix 1:1 ½ :3 ( One cement, one and half sand and three aggregate ) using hard broken granite stone jelly of foundation’s sands, beams and columns etc. (excluding the Costco providing constricting and steel fabrication for reinforcements) including curing etc. complete complying with standard specification.

Supply and fabricating and placing in position of the steel rod in all size for RCC works including cost of steel and labour charge charge etc complete as per std specification.

Plastering Cemend mortor 1:3 mix (one cement and three sand) 10mm thick including cost and conveyanace of materials and labour charge etc completed as per std specification.

Plastering Cemend mortor 1:5 mix (one cement and five sand) 12mm thick including cost and conveyanace of materials and labour charge etc completed as per std specification.

Supplying and fixing over the floors best quality of Verified tiles of 600 mm x 600 mm x 6mm size of approved colour laying with cement mortor 1:2 mix pointing the joints with colour pigments etc. Complete.

Finishing the Roof top with cm 1:3, 20mm thick etc., complete.

Painting two coats with approved quality of Emulsion paint over the plastered surface including curing cost and convence of all materials to site and all labour charges etc., complete as per standard specification.

KANDAS CONSTRUCTION