Repair and maint of split window Acs desert coolers water coolers refrigerator and misc items at Zone I area under jurisdiction of GE Army Jaisalmer

Amount

The Quoted rates shall to be included for the following :- (a) As the above work is required to be carried out for repair/maint of cooling appliances entire Mil Stn Jaisalmer , hence complaints of the US equipment’s (Desert coolers/refrigerators (ordinary/inverter)/DF/ACs (ordinary/inverter)/ water coolers/voltage stabilizers) to be handed over daily basis for different units locations and repairs to be carried out on the same day or next day or as directed by Engr-in-Charge. (b) The contractor shall depute adequate AC mechanic and helper (As per the complaint) with all connected tools on daily basis with suitable vehicle arrangement to repairs and attend the complaints in various units under AOR of GE (A) Jaisalmer and manage all spares included in this CA in advance or as directed by Engr-in-Charge. (c) Non attending the complaints with in 48 hrs Rs 200/- per day per complaints shall be recovered.

Taking down the desert cooler of any capacity from stand/slab for painting, clean the inner and outer surface of desert cooler with wire brush and made free from dust and sludge with wire brush in and including applying two coat of synthetic enamel paint over a coat of primer complete all as specified & directed by the Engineer-in-charge.

Taking out fan motor single phase 230 Volts, 1400 RPM 3 speed 1/8 HP from desert cooler and rewinding the same with supper enamelled copper wire as per existing gauge and varnishing complete with 'E' class varnish, including replacement of gun metal bushes and reassembling and fixing in position complete all all as specified & directed by the Engineer-in-charge.

S&F in repair fan motor single phase 230 Volts, 1400 RPM 3 speed 1/8 HP copper wound for desert cooler complete all all as specified & directed by the Engineer-in-charge. Make Crompton/

S&F in repair, top of desert cooler , of any capacity, fabricated out of 1 mm thick mild steel galvanised iron sheet including gas welding at joints in and including applying two coat of synthetic enamel paint over a coat of primer complete all as specified & directed by the Engineer-in-charge.

S&F in repair, front side grill of desert cooler of any capacity, fabricated out of 1 mm thick mild steel galvanised iron sheet including gas welding at joints in and including applying two coat of synthetic enamel paint over a coat of primer complete all as specified & directed by the Engineer-in-charge.

S&F in repair, side/back shutter fabric item made out of 1 mm thick galvanised iron sheet of size suitable for desert cooler of air delivery capacity 4000/5000 Cum/hour in and including applying two coat of synthetic enamel paint over a coat of primer complete all as specified & directed by the Engineer-in-charge.

S&F in repair, corner of the desert cooler made out of 1 mm thick galvanised iron sheet of size suitable for desert cooler height as per the existing (up to 1.2 M) including applying two coat of synthetic enamel paint over a coat of primer complete all as specified & directed by the Engineer-in-charge.

S&F in repair, bottom tank of desert cooler , of any capacity, fabricated out of 1 mm thick mild steel galvanised iron sheet with gas welding at joints in and including applying two coat of synthetic enamel paint over a coat of primer complete all as specified & directed by the Engineer-in-charge.

S&F in repair, PVC flexible pipe of 16 mm outer dia complete all as specified & directed by Engineer-in-charge.

S &F in repair, wood wool pad (Set of three) fixed in three sides panel of desert cooler complete all as specified & directed by Engineer-in-charge.

S&F in repair, plug top 3 pin 5 amps, 230 volts (ISI marked) complete all as specified & directed by Engineer-in-charge. Make C&S/ Anchor/Legrand or equivalent

S&F in repair,switch piano type 240 volts, single pole one way 5 amps complete all as specified & directed by Engineer-in-charge. Make- Anchor/Wipro/Havells or equivalent

S&F in repair PVC insulated and PVC sheathed round flexible three core copper conducter cable of size 40/0.0076 sqmm complete all as specified & directed by Engineer-in-charge.Make-Anchor/Havells/Staranded or equvalent

S&F in repair, capacitor suitable for 4000/5000/6000 cfm for fan motor of desert coolers complete all as specified & directed by Engineer-in-charge. Make-Epcos/Bajaj/ Havells/CG

S&F in repair, submersible pump PVC body 230 volts, 1/60 HP for desert cooler complete all as specified & directed by Engineer-in-charge. Make- Konark/Ajanta/Glun or ISI Marked

S&F in repair, iron fan blade, powder coated for fan motor of desert cooler 20 inch sweep complete all as specified & directed by Engineer-in-charge.

S&F in repair, cast iron ring of cooler fan motor with clamps incluiding nuts& bolts suitable for desert coolers complete all as specified & directed by Engineer-in-charge.

S&F in repair, PVC 3 way distributor suitable for 15 mm flexble pipe with nuts and screws for desert coolers complete all as specified & directed by Engineer-in-charge.

S&F in repair fan motor suitable for water cooler of capacity 40/80 ltr copper wound complete all as specified & directed by Engineer-in-charge. Make- As per existing make and model

S&F in repair fan motor suitable for water cooler of capacity 60/120 ltr copper wound complete all as specified & directed by Engineer-in-charge. Make- As per existing make and model

S&F in repair fan motor suitable for water cooler of capacity 150/180 ltr copper wound complete all as specified & directed by Engineer-in-charge. Make- As per existing make and model

S&F in repair condensor coil of water cooler of capacity 40/80,60/120 litres complete all as specified & directed by Engineer-in-charge. Make- As per existing make and model

S&F in repairs fan blade suitable for water cooler 40/80/60/120 liters complete all as specified & directed by Engineer-in-charge. Make- As per existing make and model

S&F in repairs fan blade suitable for water cooler 150/180 liters complete all as specified & directed by Engineer-in-charge. Make- As per existing make and model

S&F in repair, capacitor 10 MFD (suitable or as per existing sample) for fan motor of water coolers/refrigerator complete all as specified & directed by Engineer-in-charge. Make-Bajaj/ Havells/CG or equivalent.

S&F in repair, capacitor 15 MFD (suitable or existing pin or sample) for fan motor of water coolers/refrigerator complete all as specified & directed by Engineer-in-charge. Make-Epcos/Bajaj/ Havells/CG or equivalent.

S&F in repairs float valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for 15 mm bore iron pipe, weight not less than 140 grams/each, suitable for water/desert coolers complete all as specified & directed by Engineer-in-charge. Make- Prayag or equivalent

S&F in repairs 15 mm size water tap, cast copper alloy, chromium plated push type suitable for water cooler of any capacity complete all as specified & directed by Engineer-in-charge. Make- (Existing make or equivalent)

S&F in repair, filter suitable for water cooler/refrigerator of any capacity complete all as specified & directed by Engineer-in-charge. Make-Theeta/Racold/Tasspass

S&F in repair, waste water tray, stainless steel with coupling suitable for water cooler of capacity 40/80 liters complete all as specified & directed by Engineer-in-charge.Make- As per existing make and model

S&F in repair, waste water tray, stainless steel with coupling suitable for water cooler of capacity 60/120, 150/180 liters complete all as specified & directed by Engineer-in-charge.Make- As per existing make and model

S&F in repair, relay suitable for water cooler/refrigerator of any capacity complete all as specified & directed by Engineer-in-charge. Make- As per existing make and model

S&F in repair, over load protector for water cooler/refrigerator of any capacity complete all as specified & directed by Engineer-in-charge.Make- As per existing make and model

Repair of top door of the any capacity water cooler with the help of welding, hinges, nuts bolts washers and scratching the old rust hole area of the body part, apply the automotive body putty smoothening with sand paper, clean the entire part, apply the primer and paint complete all as specified by the Engineer-in-charge.

Repair of main door of the any capacity refrigerator with the help of welding, hinges, nuts bolts washers and scratching the old rust hole area of the body part, apply the automotive body putty smoothening with sand paper, clean the entire part, apply he primer and paint complete all as specified by the Engineer-in-charge.

S&F in repair, PVC drain out pipe, heavy duty 32/40 mm dia, wall thickness 2 mm having length not less than 1.0 mtr complete with fittings such as nipple, clip etc complete fixed to water coolers of any capacity complete all as specified & directed by Engineer-in-charge.

M&L for cutting and removing unservicable freezer unit of refrigerator capacity 165 to 285 Litres of any make, and supply and fix new freezer unit with door and chill tray including jointing, brazing, recharging of refrigerant gas and testing for smooth functioning complete all as specified & directed by Engineer-in-charge. Make- As per existing make and model

M&L for cutting and removing unservicable freezer unit of refrigerator capacity 310/320 Litres of any make, and supply and fix new freezer unit with door and chill tray including jointing, brazing, recharging of refrigerant gas and testing for smooth functioning complete all as specified & directed by Engineer-in-charge. Make- As per existing make and model

S&F in repairs thermostat suitable for refrigerator 165 to 320 litres capacity complete all as specified & directed by Engineer-in-charge. Make-Theeta/Racold/Tasspass

M&L for servicing of spilt type AC of capacity 1.5/2TR of any make by opening the condenser unit fixed on outside and cooling unit fixed inside the building,and cleaning (Including complete pressurized chemical washing with pressure pump and plastic bag covering avoid dust & water spreading) the complete condensor unit and cooling unit including fins and checking/testing of all parts for its serviceability, and rectification of unusual noise of motors, checking of refrigerant standing pressure, replacement of minor parts such as nut/bolt washers etc and reassembling of complete unit including testing for smooth functioning complete all as specified & directed by Engineer-in-charge.

M&L for servicing of window type AC of capacity 1.5/2 TR of any make including cleaning of filter on front side by removing dust, cleaning (Including complete pressurized chemical washing with pressure pump and plastic bag covering avoid dust & water spreading)the condenser including fins, blower fan motor and checking/testing of all parts for its serviceability, oilling/greasing to condenser cum blower fan motors, rectification of unusual noise, checking of refrigerant standing pressure, replacement of minor parts such as nut/bolt washers etc. and reassembling of complete AC including testing for smooth functioning complete all as specified & directed by Engineer-in-charge.

M&L for shifting of spilt type AC of capacity 1.5/2TR of any make by opening the indoor and outdoor unit complete with accessories and fittings including filling of drilled hole of wall using high quality plaster and transporting the AC to the site where it is to be installed, installing the AC at site in and including making necessary drilling in wall making electrical connections indoor/outdoor unit and checking/testing of all parts for its serviceability and rectification of unusual noise of motors, checking of refrigerant standing pressure, topping of refrigerant upto the required level, replacement of minor parts such as nut/bolt washers etc and reassembling of complete unit including testing for smooth functioning complete all as specified & directed by Engineer-in-charge.

M&L for removing the condenser fan motor from split type A/C of 1.5 TR capacity, rewinding the same with supper enamelled copper wire as per existing gauge and varnishing complete with 'E' class varnish, including replacement of gun metal bush, side rubber packing and refixing of motor in original position with new washer nuts & bolts complete all as specified & directed by Engineer-in-charge. Make- As per existing make and model

M&L for removing the condenser fan motor from split type A/C of 2 TR capacity, rewinding the same with supper enamelled copper wire as per existing gauge and varnishing complete with 'E' class varnish, including replacement of gun metal bush, side rubber packing and refixing of motor in original position with new washer nuts & bolts complete all as specified & directed by Engineer-in-charge. Make- As per existing make and model

M&L for removing the condenser fan motor from window type A/C of 1.5 TR capacity, rewinding the same with supper enamelled copper wire as per existing gauge and varnishing complete with 'E' class varnish, including replacement of gun metal bush, side rubber packing and refixing of motor in original position with new washer nuts & bolts complete all as specified & directed by Engineer-in-charge. Make- As per existing make and model

M&L for removing the condenser fan motor from window type A/C of 2.0 TR capacity, rewinding the same with supper enamelled copper wire as per existing gauge and varnishing complete with 'E' class varnish, including replacement of gun metal bush, side rubber packing and refixing of motor in original position with new washer nuts & bolts complete all as specified & directed by Engineer-in-charge. Make- As per existing make and model

S&F in repair blower fan motor of capacity 1/30 or 1/20 HP copper wound suitable for split type AC1.5 TR, AC/DC complete including testing commissioning complete all as specified & directed by Engineer-in-charge. Make- As per existing make and model

S&F in repair blower fan motor of capacity 1/30 or 1/20 HP copper wound suitable for split type AC 2 TR, AC/DC complete including testing commissioning complete all as specified & directed by Engineer-in-charge. Make- As per existing make and model

S&F capacitor 45/50/60/70 MFD (4 pin/6 pin) suitable for A/C of capacity 1.5/2 TR complete all as specified & directed by Engineer-in-charge. Make-Epcos/Havells/CG or equivalent

Repair/Replacement of refrigerator fan motor suiable of cap 165 ltr/285/310 ltr complete including testing complete all as specified & directed by Engineer-in-charge. Make- As per existing make and model.

S&F in repair, drain out pipe of split AC of PVC, heavy duty of 15 mm dia and 1.5 mm wall thickness complete with fittings,spacer and saddles etc complete all as specified & directed by Engineer-in-charge.

S&F in repair, fan blade suitable for window type AC 1.5/2 TR capacity complete all as specified & directed by Engineer-in-charge. Make- As per existing make and model

S&F in repair, fan blower of split type AC 1.5/2 TR capacity complete all as specified & directed by Engineer-in-charge. Make- As per existing make and model

S&F in repair, relay suitable for window type AC 1.5 /2.00 TR capacity complete all as specified & directed by Engineer-in-charge. Make- As per existing make and model

S&F in repair, over load protector suitable for window type AC 1.5 /2.00 TR capacitiey complete all as specified & directed by Engineer-in-charge. Make- As per existing make and model

S&F in repairs remote control (Micro processor) unit suitable for split type AC 1.5/2 TR capacity complete with wires of remote complete all as specified & directed by Engineer-in-charge. Make- As per existing make and model

Cutting and taking out compressor of window type AC of 1.5 TR and supply and fixing the compressor with jointing of copper refrigerant pipe line in and including charging of refrigerant gas to required level complete all as specified & directed by Engineer-in-charge. Make- Hitachi,LG,Voltas or equivalent.

S&F in repair, of thermostat suitable for window type AC 1.5/2 TR capacity complete all as specified & directed by Engineer-in-charge. Make:- Theeta/ Racold /Tasspass

Cutting and taking out compressor of window type AC of 2 TR and supply and fixing the compressor with jointing of copper refrigerant pipe line in and including charging of refrigerant gas to required level complete all as specified & directed by Engineer-in-charge. Make- As per existing make and model

Cutting and taking out compressor of split type AC of 1/1.5 TR and supply and fixing the compressor with jointing of copper refrigent pipe line in and including charging of refrigent gas to required level complete all as specified & directed by Engineer-in-charge. Make- As per existing make and model

Cutting and taking out compressor of split type/ Cassette AC of 2TR and supply and fixing the suitable compressor with jointing of copper refrigerant pipe line in and including charging of refrigerant gas to required level complete all as specified & directed by Engineer-in-charge. Make- As per existing make and model

S&F in repair, copper condenser suitable for split/Cassete type AC of capacity 1.5/2 TR complete all as specified & directed by Engineer-in-charge. Make- As per existing make and model

S&F in repair, copper condenser suitable for window type AC of capacity 1.5/2 TR complete all as specified & directed by Engineer-in-charge. Make- As per existing make and model

S&F in repair, metal clad plug top three pin 15 Amps 230 volts AC complete all as specified & directed by Engineer-in-charge.

S&F in repair, Air Filter for Air conditioner split type having capacity1.5/2.0 ton (Set of 3 pieces) complete all as specified & directed by Engineer-in-charge. Make- As per existing make and model

S&F in repair, PCB suitable to Split/Cassette type AC 1.5/2 TR complete all as specified & directed by Engineer-in-charge. Make- As per existing make and model

S&F in repair, PCB suitable to window type AC 1.5/2 TR complete all as specified & directed by Engineer-in-charge. Make- As per existing make and model

S&F in repair, PCB suitable to refrigerator to any capacity complete all as specified & directed by Engineer-in-charge. Make- As per existing make and model

S&F in repair, PCB suitable to inverter refrigerator to any capacity complete all as specified & directed by Engineer-in-charge. Make- As per existing make and model

S&F in repair,rubber ring of blower motor for window type AC of 1.5 ton capacity complete all as specified & directed by Engineer-in-charge.

Taking out existing worn out bottom tray and supply & S&F plastic tray of split AC having capacity 1.5 / 2 ton complete all as specified & directed by Engineer-in-charge. Make- As per existing make and model

S&F in repair copper tube size 1/4" of split AC having capacity 1.5/2 ton complete all as specified & directed by Engineer-in-charge.

S&F in repair copper tube size 1/2" of split AC having capacity 1.5/2 ton complete all as specified & directed by Engineer-in-charge.

S&F in repair copper tube size 3/8" of split AC having capacity 1.5/2 ton complete all as specified & directed by Engineer-in-charge.

S&F in repair insulation suitable for split AC 1.5/2 TR complete all as specified & directed by Engineer-in-charge.

S&F in repair, condensor fan motor for deep freezer of any make and capacity complete all as specified & directed by Engineer-in-charge. Make- As per existing make and model

S&F in repair, condensor for deep freezer of any make and capacity complete all as specified & directed by Engineer-in-charge. Make- As per existing make and model

Cutting and taking out compressor of deep freezer of capacity 150/180/210 Ltr and supply and fixing the compressor with jointing of copper refrigent pipe line in and including charging of refrigent gas to required level complete all as specified & directed by Engineer-in-charge.Make- As per existing make and model

Cutting and taking out compressor of deep freezer of capacity 310/320/425 Ltr and supply and fixing the compressor with jointing of copper refrigent pipe line in and including charging of refrigent gas to required level complete all as specified & directed by Engineer-in-charge. Make- As per existing make and model

Cutting and taking out compressor of water cooler of capacity 40/80 Ltr and supply and fixing the compressor with jointing of copper refrigent pipe line in and including charging of refrigent gas to required level complete all as specified & directed by Engineer-in-charge.Make- As per existing make and model

Cutting and taking out compressor of water cooler of capacity 60/120 Ltr and supply and fixing the compressor with jointing of copper refrigent pipe line in and including charging of refrigent gas to required level complete all as specified & directed by Engineer-in-charge. Make- As per existing make and model

Cutting and taking out compressor of water cooler of capacity 150/180 Ltr and supply and fixing the compressor with jointing of copper refrigent pipe line in and including charging of refrigent gas to required level complete all as specified & directed by Engineer-in-charge. Make- As per existing make and model

S&F in repair, condensing coil suitable for refrigerator of capacity 165 to 280 liters complete all as specified & directed by Engineer-in-charge. Make- As per existing make and model

S&F in repair, condensing coil suitable for refrigerator of capacity 280 to 320 liters complete all as specified & directed by Engineer-in-charge. Make- As per existing make and model

Cutting and taking out compressor of refrigerator of capacity 285/300/310 litres of any make, & replacing the same compressor with new of same make of model complete, re-installing in original position with all accessories like relay with over load protector, filter & supply & recharging of refrigerant complete including testing for smooth functioning complete all as specified & directed by Engineer-in-charge. Make- As per existing make and model

Cutting and taking out compressor of refrigerator of capacity 165/180/215 litres of any make, & replacing the same compressor with new of same make of model complete, re-installing in original position with all accessories like relay with over load protector, filter & supply & recharging of refrigerant complete including testing for smooth functioning complete all as specified & directed by Engineer-in-charge. Make- As per existing make and model

Cutting and taking out compressor of refrigerator of capacity 260/280 litres of any make, & replacing the same compressor with new of same make of model complete, re-installing in original position with all accessories like relay with over load protector, filter & supply & recharging of refrigerant complete including testing for smooth functioning complete all as specified & directed by Engineer-in-charge. Make- As per existing make and model

S&F in repair heater refrigerator capacity 310/320 Litres complete all as specified & directed byEngineer-in-charge. Make- As per existing make and model

S&F in repair, capillary tube suitable for any make & capacity water cooler/refrigerator complete all as specified & directed by Engineer-in-charge. Make- As per existing make and model.

Supply & charging of refrigerant gas R-22 (freon) for charging in Refrigerator/water cooler/DF/ window/split type AC of 1.5/2 TR capacity complete and checking of leakage, testing for proper functioning all as specified & directed by Engineer-in-charge. Note : Measurement of Gas cylinder to be done in the presence of JE/Engr-in-charge and daily usage record to be maintained at the time of leaving the station.

Supply & charging of refrigerant gas 407 for charging in Refrigerator/water cooler/DF/ window/split type AC of 1.5/2 TR capacity complete and checking of leakage, testing for proper functioning all as specified & directed by Engineer-in-charge. Note : Measurement of Gas cylinder to be done in the presence of JE/Engr-in-charge and daily usage record to be maintained at the time of leaving the station.

Supply & charging of refrigerant gas R-410A for charging in Refrigerator/water cooler/DF/ window/split type AC of 1.5/2 TR capacity complete and checking/testing for proper functioning all as specified & directed by Engineer-in-charge. Note : Measurement of Gas cylinder to be done in the presence of JE/Engr-in-charge and daily usage record to be maintained at the time of leaving the station.

Supply & charging of refrigerant gas R-134C (freon) for rRefrigerator/water cooler/DF/ window/split type ACs of any capacity complete and checking/testing for proper functioning all as specified & directed by Engineer-in-charge. Note : Measurement of Gas cylinder to be done in the presence of JE/ Engr-in-charge and daily usage record to be maintained at the time of leaving the station

Supply & charging of refrigerant gas 600A for refrigarator/water cooler of any capacity complete and checking/testing for proper functioning all as specified & directed by Engineer-in-charge. Note : Measurement of Gas cylinder to be done in the presence of JE/Engr-in-charge and daily usage record to be maintained at the time of leaving the station

S&F in repair transformer of voltage stabilizer 4/5 KVA and rewinding the same with supper enamelled copper wire as per existing gauge and varnishing complete with 'E' class varnish, including and reassembling and fixing in position complete all all as specified & directed by the Engineer-in-charge.

S&F in repair, PCB circuit of existing size and shape of volatage stabilizer 4/5 KVA complete all as specified & directed by Engineer-in-charge. Make- As per existing make and model

S&F in repair relay of volatage stabilizer 4/5 KVA complete all as specified & directed by Engineer-in-charge. Make- As per existing make and model

S&F in repair single pole and neutral enclosure with two pin earth plug & socket complete with one SP MCB 20 Amps 240 Volts complete all as specified & directed by Engineer-in-charge. (Make:-Havells/Legrand/IndoAsian)

S&F in replacement of PVC connection pipe 15mm dia of both ends PTMT nuts and 450mm length complete all as specified Make Prayag or equivalent

Cutting and taking out DC compressor of inverter refrigerator of capacity 285/300/310/340 litres of any make, & replacing the same compressor with new of same make of model complete, re-installing in original position with all accessories like relay with over load protector, filter & supply & recharging of refrigerant complete including testing for smooth functioning complete all as specified & directed by Engineer-in-charge. Make- As per existing make and model

Cutting and taking out DC compressor of inverter split type AC of 1.5TR and supply and fixing the compressor with jointing of copper refrigent pipe line in and including charging of refrigent gas to required level complete all as specified & directed by Engineer-in-charge. Make- As per existing make and model

Cutting and taking out DC compressor of inverter split type AC of 2TR and supply and fixing the compressor with jointing of copper refrigent pipe line in and including charging of refrigent gas to required level complete all as specified & directed by Engineer-in-charge. Make- As per existing make and model.

S&F in repair, PCB suitable for inverter split/cassette type AC 1.5/2 TR complete all as specified & directed by Engineer-in-charge. Make- As per existing make and model

M&L in repair for swing motor of split AC any make any type all as per sample all as specified & directed by Engineer-in-charge

M&L in repair for fixing of copper conductor of outdoor unit of split AC any Make/type as per sample all as specified & directed by Engineer-in-charge

M&L in repair for split AC valve of ½” dia all as per sample all as specified & directed by Engineer-in-charge

M&L in repair for split AC valve of ¼” dia all as per sample all as specified & directed by Engineer-in-charge

S R ENTERPRISES