COMPREHENSIVE MAINTENANCE OF B/R NATURE FOR OMQ, SMQ AND OTM AREA AT 25 ED AF STN DEOLALI

Amount

M&L for preparation of old decorated surfaces of walls by washing, rubbing down and stoping of painted surfaces and applying one coats of Cement Base Paint complete all as specified and directed.

M&L preparing old plastered surfaces of wall and applying one coat of white wash complete all as specified and directed.

M&L preparing old plastered surfaces of ceiling and applying one coat of white wash complete all as specified and directed.

M&L Preparing old plastered surfaces of ceiling and applying two coats of white wash complete all as specified and directed.

M&L for complete removal of existing treatment on walls including washing down, rubbing down and applying two coats of oil bound distember over 3 mm thick wall putty finished even & smooth complete all as specified and directed.

M&L for preparation of old decorated surfaces of walls by washing, rubbing down and stoping of painted surfaces and applying one coats of oil bound emulsion complete all as specified and directed.

M&L Preparing old plastered surfaces of ceiling and applying one coats of oil bound emulsion complete all as specified and directed.

M&L for complete removal of existing treatment on walls including washing down, rubbing down and applying Two or more coats of 100% Premium exterior emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. as specified.

M&L Preparing old painted wooden surfaces of any description, not otherwise described, over 10cm width or girth and one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparing old painted steel and iron surfaces of any description, over 10cm in width or girth, not otherwise described and applying one coat of synthetic enemal paint complete all as specified and directed.

Taking down chowkats with shutter (without taking off shutter from the frame) not exc 1.5 Sqm each.

All as item 1 herein before but exc 1.5 sqm but not 4 Sqm each

Taking down shutter of any description n.exc 1 sqm each.

All as per item No 3 here in before but exc 1 sqm and n.exc 2 sqm each.

Refixing shutters of any description in the same opening incl taking down and resecuring or easing and adjusting all as specififed not exc 1 sqm each

-ditto - all as item 5 herein before but exc 1 sqm but not exc 2 sqm each

S&F powder coating anodised aluminium section for shutter/frame for door, window and ventilator complete all as specified.

S&F powder coating Anodised aluminium window and ventilator shutters, sliding type two or three tracks without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, aluminium fittings like locking system complete all as specified and directed by Engineer-in-Charge.(Thickness of powder coating not less than 50 micron) complete all as specified and as directed.

S & F plain sheet glass 5 mm thick tinted, fixed to aluminium doors/ windows / ventilators complete all as directed by Engr-in-Charge (Note:- Beading/rubber packing is included in the rates for aluminium sections above.)

S & F 35 mm thick second class hard wood factory made glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., divided in to squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc; sizes of members of shutters as specified in SSR Part-I, section 8, clause 8.24 (a).

S & F 40 mm thick Flush shutters, solid core construction, with particle board core and if both faces are covered with decorative face veneer with lipping/frame to match

S & F factory made solid panel PVC door frame of size 50mmx47mm out of 5mm wood grain printed PVC sheet & edges will be printed to match with printed sheet reinforced with M.S. square tube, all as per specification and drawing.

S & F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strips of 20 mm width stuck inside with solvent cement for stiles and single sides prelam PVC sheet and stile & rails having one side feathered edge and on other side 10mm (90°) bent edges & as gap insert for top rail & bottom rail; Panelling to be fitted in the M.S. frame welded/ sealed to the styles & rail with suitable PVC sheet beading, and joint together with solvent cement, all as specification and drawing.

S&F Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 all as completed

Hacking out old broken glass panes (any thickness size quality or description ) from wooden frame fixed with oil putty or beads area not exc 0.5 Sqm each all as directed

All as item 21 herein before but from metal frame incl punching or drilling out old glazing pins/spring clips and proividng new ones all as directed

S & F 3mm thick sheet glass ordinary quality and glazing with oil putty not exe 0.5 sqm in each pane.

M&L 2nd class HW plain solid straight chowkhats and frames worught framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete

M&L Preparing surfaces of wood and wood based materials, steel and iron work, new or old, of any description and girth, like ends of posts, backs of chawkats, and treated with tar or coal tar black paint

S&F 100 mm long Butt hinges, extruded aluminium ally with galvanished mild steel hinge pin anodised and fixed type B-21

S&F mild steel butt hinges medium weight cold rolled 100 mm size

- ditto - all as item 27 herein before but 75 mm size

S & F 100 mm size aluminium anodised barrel tower bolt of extruded section .

S&F 300 mm Aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) & fixing clip of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed.

S & F 100 mmm long extruded aluminium ally handles, fabricated type., anodised

S & F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised.

Fixing Only in repair ordinary rat tails 300 mm size pattern door springs including roller and roller plate complete.

Fixing Only in repair 75 mm length floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring Fixed in floor

S & F stainless steel wire cloth, 0.36 mm dia of wire and average width of aperture 1.4 mm and fixed with stainless steel wire staples including necessary wooden bedding.

All as item 39 herein before but in repair for aluminium/steel/wooden window/door including for fixing necessary wooden bedding/iron staples/aluminium bedding

M&L 2 coat of synthetic enamel painting to wood and wood based material surfaces exc 10cm width or girth over a one coat of pink primer incl preparation.

Taking down cement plaster of any description, on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc complete.

M & L rendering 15 mm thick plaster in cement mortar 1:6 on stone masonry surfaces or other than of fair faces of brick or concrete surfaces, finished even and smooth with 1 mm thick layer of sagol finish complete.

M & L for prepariation of New plastered surfaces and applying two coats of distemper oil emulsion over a coat of chalk whiting for preparatory to distempering on surfaces of walls.

M&L in repair for 18/19 mm thick prelaminated particle board, interior grade prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work in cup board shutters, partitions, shelves, cupboard drawers, pelmet boxes and similar work including taking down olds shutters/shelves.

M&L for external teak wood lipping, 6mm thick fixed with nails for particle board of 18/19 mm thick

S & F in hasp and staple of size 125 mm, safety type, aluminium anodised with mild steel hinge pin including bolt to hing plate and fixed with screws.

Demolition of cement concrete (unreinforced) in ground floors (below or above ground level) not exceeding 15cm thickness all as directed by Engr-in-Charge.

M & L 75mm thick PCC 1:3:6 mix type C2 as in plinth protection and surface to be finished fair without using extra cement .

M & L for 75 mm thick sub base in PCC 1:4:8 type D-2 (using 40 mm graded stone aggregates) all as specified.

M&L for Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in near cement slurry in floors with grey cement and pigment over 15 mm thick screed bed in CM 1:6

M & L for Cement concrete 1: 2:4 type B-1 (20 mm graded stone aggregate) as in edges for Coping.

M & L cement concrete 1:2:4 type B-0 (using 12.5 mm graded stone aggregate ) as in 25 mm thick flooring finished even and rough.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed.

M&L mat finish ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 but not exceeding 0.18 sqm,(400x400) in floors etc over and including 15 mm thick screed bedding in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface complete all as specified and directed.

M&L mat finish ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 but not exceeding 0.18 sqm,(400x150) in skirting etc over and including 10 mm thick bedding layer in CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface complete all as specified and directed.

M&L for Coloured Glazed ceramic tiles in vertical surface 450x 300x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match and including 15mm thick bedding layer/ backing coat in CM 1:4 complete all as specified and directed.

M&L granite (of any type) work ( table rubbed & polished), 18 to 20mm thick, in steps, jambs, pillars, window-cill, cooking platforms & like in cement mortar (1:4) including polishing of chamfered edges and pointing in white cement using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick screed bed in CM (1:6).

Dismantling Structural steel work including doors, gates but excluding framed truss etc.

S & F rolled mild steel framed work as in doors,Grill or gates of angle or other section confirming to Fe 410 - W, with gusset plates, rails braces, etc., complete, drilled for fixing of steel sheeting or other covering and hanging and fixing complete.

M & L for prepariation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer.

S&F mild steel butt hinges heavy weight cold rolled 125mm size

S&F mild steel sliding door bolt plate type black jappaned with bright bolt not less than 12 mm dia with and including 6 bolts and nuts four o bolt plate and two on staple 250 mm long

S & F 200 mm long mild steel barrel tower bolts, stove enamelled black, with bright bolt.

M&L Preparation of newly untreated surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coats of aluminium paint over a coat of aluminium oxide primer complete all as specified and directed by Engr-in-Charge.

Dismantling ceiling boarding of any description fixed in any position with nails incl cover fillets/aluminium snap grid.

S&F Anodised aluminium snap grid frame work size 605x605 mm for false ceiling incl Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long all as specified & directed by Engr -in-charge

M & L Non asbestos fibre cement building boards 4 mm thick (one side embosed design), fixed or laid/ inserted to Aluminium grid frame work in ceiling with clips all as specified and directed.

Fixing only in repairs Asbestos Cement Plain building boards/Non asbestos fibre cement building boards any thickness, fixed to timber/ Aluminium frame work with screws in ceilings.

M & L for prepariation of newly cement building boards surfaces of ceilings and applying two coats of white wash.

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars, walls etc.

M & L for brick work with sub-class `B' bricks old size, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6.

M& L Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in Cement mortar 1:6

M & L for rendering 15 mm thick on fair faces of brick work or concrete surfaces of walls in cement mortar 1:4 finished even and fair.

M & L for rendering 15 mm thick on stone masonry surfaces or surface other than fair face of brick-work or on one side of lathing surfaces of walls in cement mortar 1:4 finished even and fair.

M & L for prepariation of new plastered surfaces and applying two coats of cement base paint over a coat of alkali resitant primer on surfaces of walls.

Taking up or down steel water tubing and connecting incl cleaning for refixing or removal to stores for 20mm bore. complete all as specified and as directed

M&L GI tubes medium grade 20mm bore fixed complete to wall or laid in floor. complete all as specified and as directed.

Taking up or down steel water tubing and connecting incl cleaning for refixing or removal to stores for 15mm bore.

S & F GI tubing 15 mm bore medium grade with all fittings & fixed complete to walls or laid in floors.

Dismantling water storage tank exc 250 ltrs & n.exc. 500 ltrs all as specified

Dismantling water storage tank exc 500 ltrs & n.exc. 1000 ltrs all as specified

Fixing Only in Repair Rotational moulded polyethylene water storage tanks of 500 ltr capacity (cylinderical verticla with closed top ) hoised and fixed in position all as specified in SSR part I

Fixing Only in Repair Rotational moulded polyethylene water storage tanks of 1000 ltr capacity (cylinderical verticla with closed top ) hoised and fixed in position all as specified in SSR part I

Fixing only in repairs ball brass valves with brass rod, high pressure with polythelene float and fly nut complete, screwed for iron pipe or for brass ferrule of 15 or 20mm dia.

Fixing only in repairs 15 or 20 mm dia Gun Metal, globe or Gate Valve with Iron wheel head Screwed both ends for Iron Pipe and fixed.

Fixing only in repair Bib taps for 15 mm bore pipe, cast copper alloy fancy type chromium plated fixed in repairs of complete all as spd and directed.

Fixing only in repair pillar taps, Cast Copper alloy, with capstan heads, chromium plated, fency type screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe.

Fixing only in repair stop cocks 15 mm bore, chromium plated , fancy type screwed down , high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions .

Fixing only in repair wash hand basins, vitreous china( flat back) white of any size including cutting for and pinning in ends of brackets or erecting stand including waste coupling fitting, brass chromium plated 32 mm size with long screwed shucks and fly nuts and including PVC discharge pipe as specified.

S & F in repair Vitreous China Squatting pan, Orissa pattern, size 580 x 440 mm white with `P' or `S' trap, front or back inlet and integral foot rests including connection to trap, to flushing pipe etc. complete including PCC for making good to floor etc.

Fixing only in repairs 10 liters PVC valveless symphonic action type flushing cistern high/low level, white complete with inlet, ball valve, float and handle including brackets and telescopic down pipes and joint with WC complete.

Fixing only in repairs PVC connection 15 mm bore size with PTMT nuts and PVC washers of length 600 mm.

S & F in repair vitreous china wash down water closet (Pedestal) including white PVC seat cover closed pattern with flat bottem and cover and mild steel chromium plated hinge device,connection to drain or outgoing pipe and to flushing pipe, antisyphonage pipe joint to socket or stoper etc, white (EWC).

Taking down carefully existing bitumen tarfelt including plaster and roughning the surface cleaning the surface and removing of the rubbish to a distance exceeding 500m but not exc 1.50 Km and depositing where directed.

M& L 10mm thick cement plaster in cement mortar 1:3 on concrete surface finished even and smooth using WPC liquid of make Dr. Fixit or STP as per manufacturer instruction @ 0.200 ltr in 50 Kg of cement

M&L for cleaning the newly plastered surface thoroughly with wire brushes and providing water proofing treatment all as specified here in after :- (a) Bituminous primer @ 0.30 liter per SqM confirming to IS 3384-1986. (b) 3mm thick APP polymeric mambrane minimum weighing 3 kg/sqm of M/S TEXSA Ltd or M/S TIKI Asphalt hydro stop or IWL 3 Kg/Sqm membrane (one layer) laid by torch application method with overlaps of 100mm joints of traverse direction and 75mm at longitudinal direction duly thermofused by flame torch all as specified in application manuel of company. (c) Applying two coat of bituminous aluminium paint @ 200ml/sqm.

Supply only liquid water proofing compound

S& F in repair stain less steel decorative cutrain rod of 25 mm bore inluding 2 nos steel finale and bracket 02 nos etc and fixed to wall with plastic rowl plug and steel screw complete all as specified and directed.

S&F in repair Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed

Fixing only in repairs health faucet including flexible pipe and MS anodised hanging device all as directed.

Fixing only in repairs CP angular stop cock with wall flange all as specified and directed by Engr-in-Charge.

Fixing only in repairs brass WHB CP mixer for mixing hot & cold water screwed down for iron pipe and fixed.

Fixing only in repairs brass Shower CP mixer for mixing hot & cold water screwed down for iron pipe and fixed.

Fixing only in repairs, waste coupling brass chromium plated any type for sink, Basin complete all as specified and directed by Engr-in-Charge.

Cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes, dismantling of existing float valve & re fixing the same after cleaning the water tank, capacity of tank exc. 250 ltr but n.exc 500 ltrs. complete all as specified and as directed

Ditto all as per serial item No 110 above but capacity of tank exc. 500 ltr but n.exc 1000 ltrs. complete all as specified and as directed

Dismantling of Single layer Mangalore pattern or similar tiles in roofing all as completed.

M &L Roof tiles, Mangalore pattern, interlocking at side joints, laid dry all as completed

Fixing only Roof tiles, Mangalore pattern, interlocking at side joints, laid dry all as completed

M&L or hip tiles to suit Mangalore pattern of roofing tiles, bedded and jointed in cement mortar 1:6 all as specified

S&F for 15 mm thick Second class hardwood Boarding, with nails in any situation (except flooring and skirting)

M&L for timber framed and fixed Second class hardwood in scantling

Removal of debris obtained from demolition/dismantling upto 5km distance to outside MD land complete all as specified and as directed

Dismantling of CGI/PGI sheet as in roof covering including ridge .

Dismantling of Asbestos cement (corrugated, semi corrugated etc) sheets in roof covering including ridge..

S&F painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

S&F pre- painted galvalume aluminium zinc coating GI based Plain steel sheet 0.5 mm thick including rideg of an colour having tensile strength of 550 Mpa as in roof covering to wall fixed with self tapping screws as specified.

S&F Roof trusses (framed),tubuler trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (tubes, Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.Fe-290 Gde E-165

Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed and removing the material from the site in any mortar all as specified & directed.

M & L for sand filling under floors or in foundations including watering and consolidation as in levelling coarse for fixing of interlocking tiles all as specified and directed by Engineer-in-Charge.

M & L for machine pressed coloured rubber moulded precast concrete interlocking paver block with pigment any shape and size confirming to IS-15658-2006 of 60 mm thickness, M-35 grade all as specified and directed by Engineer-in-Charge.

Fixing only Towel Rail 600 mm Long

Fixing only 600mmx500mm bevelled edge mirror fixed to wooden plugs with chromium plated brass screws and cup washers.

Fixing Only in repairs Brass chromium plated shower rose with or without swivel joints, any size, including fixing of steel pipe or union.

Fixing Only in repairs Sinks kitchen or laboratory with plugs, washers and wastes; including beding in cement mortar on to dwarf walls, or including fixing cantilever brackets and connecting union to waste pipe

Fixing only in repair Grating doom 125 mm dia with waste hole including necessary cement works

Fixing only in repair Grating doom 100 mm dia including necessary cement works

S&F in repair modular shutters of MDF factory made finished boards 20mm thick with self closing hinges, powder coated handles, magnetic lock system etc for SS baskets fitted below the cooking platform complete all as specified.

S&F in repair Moduler Kitchen cabinet along with shutters and shelves having depth not less than 30 cm with necessery partitions inside the cabinet with MDF factory made finished boards 20mm thick with self closing hinges , powder coated handles, magnetic lock system etc complete all as specified.

Removal of vegetation plants over roof /chajjas and stone /brick masonry wall of bldg including cleaning and repair with cement concrete 1:2:4 (using 20mm aggregate ) etc as per direction of Enge-in-charge.

S&F in repair corner glass shelf including chromium plated hinges anf fittings all as specified and directed by Enger-in-charge.

M &L Roof tiles, Mangalore pattern, interlocking at side joints, laid dry all as completed up to height of 12 mtr all as specified and directed .

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement

S&F in repair auto soft closing hinges 35mm of 0 crank (KH-001) OR 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters make : Hexa, Hettich, Hafele

S&F in repair ball bearing runners 450mm telescopic channel (KTS-20) full extension load capacity 50 kgs, Make : Hexa, Hettich, Hafele

&F chrome plated stainless steel wire basket with border of 5mm dia and inner grill 3mm dia of wire (storage basket) pull out type for large utensiles, size 480x500x150 mm of grade 304 with necessary fixing clips etc. Including stainless staging work for basket of SS grade 304 Sq pipe , pipe 20x20 & 1mm thick complete all as specified and as directed by engineer-in-charge. Make – butterfly, Hettich or equivalent.

S&F in repair chrome plated stainless steel wire basket with border of 5mm dia and inner grill 3mm dia of wire (cup and saucer basket) pull out type, size 380x500x100 mm of grade 304 with necessary fixing clips etc. Including stainless staging work for basket of SS grade 304 Sq pipe , pipe 20x20 & 1mm thick complete all respect as specified and as directed by engineer-in-charge. Make – butterfly, Hettich or equivalent

S&F in repair chrome plated stainless steel wire basket (plate basket) pull out type, size 380x500x100 mm of grade 304 with necessary fixing clips etc. Including stainless staging work for basket of SS grade 304 Sq pipe , pipe 20x20 & 1mm thick complete all respect as specified and as directed by engineer-in-charge. Make – butterfly, Hettich or equivalent

S&F in repair chrome plated stainless steel wire basket with border of 5mm dia and inner grill 3mm dia of wire (cutlery basket) pull out type, size 380x500x100 mm of grade 304 with necessary fixing clips etc. Including stainless staging work for basket of SS grade 304 Sq pipe , pipe 20x20 & 1mm thick complete all respect as specified and as directed by engineer-in-charge. Make – butterfly, Hettich or equivalent

S&F in repair chrome plated stainless steel wire basket with border of 5mm dia and inner grill 3mm dia of wire (Grain trolly) pull out type, size 480x500x200 mm of grade 304 with necessary sliding frame structure, fixing clips etc. Including stainless staging work for basket of SS grade 304 Sq pipe , pipe 20x20 & 1mm thick complete all respect as specified and as directed by engineer-in-charge. Make – butterfly, Hettich or equivalent

Supply & fix in repair chrome plated stainless steel wire basket with border of 5mm dia and inner grill 3mm dia of wire (Bottle pull out) pull out type, size 120x500x432 mm of grade 304 with necessary sliding frame structure fixing clips etc. Including stainless staging work for basket of SS grade 304 Sq pipe , pipe 20x20 & 1mm thick complete all respect as specified and as directed by engineer-in-charge. Make – butterfly, Hettich or equivalent

M/S Nilesh Enterprises (BID ID -3400460)

Vinod Enterprises (BID ID -3400582)

M/S KANNANS (BID ID -3406334)