REPAIRS/REPLACEMENT OF SECURITY FENCING AT TECH AREA AFS YELAHANKA

Amount

Dismantling fencing wiremesh ,barbed wire any type all as specified.

Supply only Chain Link MS galvanised fencing , any size or type, all as specified and directed.

Fixing only chain link fencing including line wires, any mesh , size and type to any type of standards , rails , straining bolts, etc. including provision of binding wire, all as specified and directed.

S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 5cm but n exc 10cm long, diameter of neck 5 to 10 mm all as specified and as directed.

M&L Mild steel deformed bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified .

Dismantling wrought iron or mild steel work of any description not otherwise provided for.

S&F Rolled mild steel in Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated)Fe 410-W(Gde E-250) quality-A

Demolition for cement Concrete un reinforced in ground floors and pavings n exc 15 cm thickness (below or above ground level)

M&L for Soling (or sub base) with broken boulders or quarried stone, 150mm spread thiickness , interstices filled, surface formed and rolled and consolidated to required gradient and camber complete all as specified and as directed.

M&L for PCC 1:4:8 Type D2 using 40mm graded stone aggregate in foundations, filling and mass-concrete.

M&L for 100mm thick Plain Cement concrete 1:2:4, type B1 using 20 mm graded stone aggregate as in floor .

M&L for Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound,Grade 'A'.

Demolition of brick work or stone masonry built in CM incl all quions all as specified

M&L for Precast cement concrete block masonry with solid blocks of cement concrete1:3:6 type C1 (20 mm grared stone aggregate) exc.10cm in width and setting in cement mortar 1:6 complete all as specified.

Taking down cement or cement lime plaster of any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete as specified and directed.

M&L for cement plaster 15mm thick in cement mortar 1:4 on fair faces of stone/ brickwork finished even & smooth without using extra cement etc complete.

M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint including priming coat with alkali resistant priming paint etc complete all as specified and directed.

M&L for PCC 1:3:6 type C1 using 20mm graded stone aggregate as in coping, finishing,throating etc complete all as directed .

M&L for mixing sand and saw dust in volumetric proportion 1:1 including laying and spreading upto maximum depth of 60 cm on slope or an inclined angle 60 degree upward direction upto a distance of 50 mtrs in Firing Range complete all as specified and as directed by Engr-in-Charge. Note: 1. The Rate includes for Mixing and spreading of sand and saw dust in proporation 1:1 and laid in slope or an inclined angle 60 degree upward direction and necessary consolidation/ compaction complete all as specified and as directed by Engr-in-Charge.

Dismantling boarding, any description, fixed in any position with screws.

S&F 2nd class hardwood 40mm thick Boarding in Floors and Skirting, Planed one side, with butt joints and fixed with screws.

M&L for preparing new or old surfaces of wood and wood based materials of any description and girth, not otherwise described and treated with two coats of creosote oil complete all as specified and as directed.

eurekaenterprises

Lakkaiah Rangaswamy

SAPTHAGIRI CONSTRUCTIONS