Special repair of addition and alteration for establishing labour ward in Dan Veer Karan Rajkiya Hospital at Karnal.

Amount

Earth work in excavation in foundations, trenches, etc. in all kinds of soils, not exceeding 2 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil, clear from the edge of excavation and subsequent filling around masonry, in 15 cm layers with compaction, including disposal of all surplus soil, as directed within a lead of 30 metres.(HSR 6.6)

Dismantling cement concrete plain 1:2:4 [HSR8.6(d)]

Cement concrete 1:8:16 with brick ballast 40mm nominal size in foundation and plinth (HSR 10.26)

Cement Concrete 1:4:8 with stone aggregate 20mm nominal size in foundation and plinth. [HSR 10.38]

Cement concrete 1:2:4 with stone aggregate 20 mm nominal size in foundation and plinth. (HSR 10.41)

Cement concrete 1 : 1½ : 3 with stone aggregate 20 mm nominal size for reinforced concrete work for walls exceeding 20 cm thickness (straight and curved) beams,girders, stairs, columns, (square or rectangular) battens and lintels etc excluding steel rainforcement but including centring and shuttering, laid in position, complete in all respects.[HSR 10.86 + 10.95(a)]

First class brick work laid in cement sand mortar 1 : 6 in foundation and plinth (HSR 11.2)

First class brick work laid in cement sand mortar 1 : 4 in foundation and plinth (HSR 11.4)

First class brick work laid in cement sand mortar 1 :6 in first storey upto 4 metres above plinth level [HSR 11.7]

First class brick work laid in cement sand mortar 1:4 in first storey upto 4 metres above plinth level ( HSR 11.9)

Providing and fixing PVC rain water pipe 6 Kg. Pressure of ISI mark in cement mortar during masonry work. a) 100mm dia PVC pipe 6 Kg. pressure. (HSR 13.89 a)

Providing & fixing false ceiling with grooves with 12mm to 15mm thick, 600mm x 600mm best quality mineral fibre tiles of approved make fixed on M.S. Steel runners frame i/c cost of screws angles, cleats, rawel, plugs, with taping and painting, etc. complete in all respects as approved by the Engineer-In-Charge. (HSR 13.93)

Providing and fixing ceramic tiles / anti skid tiles of size 400 mm x 400mm or above size of approved make in flooring, laid in any pattern as specified over base of 20mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade of tiles. Note:- Tile shall be of premium quality (first quality) of reputed manufacturer like NITCO, KAJARIA, SOMANI, ORIENT & JOHNSONS. (HSR 14.91)

12 mm thick cement plaster 1 : 4 on walls ( HSR 15.5 )

15mm thick cement plaster 1:6 on walls [HSR 15.7]

15 mm thick cement plaster 1:3 on the rough side of single or half brick wall [HSR 15.9]

Preparation of plastered or concrete surfaces for painting, including sand papering the surface, applying one coat of linseed oil and filling with approved quality filler, consisting of white lead, linseed, varnish and chalk mitti including finishing surface to the required finish, complete. (HSR 16.24)

Preparation of plastered surface for oil bound distemper including sand papering the surface, applying one coat of linseed oil, and filling with approved quality filler, consisting of white lead , linseed oil,varnish and chalk mitti including finishing the surface to the required finish complete. (HSR 16.52)

Distempering with dry distemper (of appd. Manufacturer) two coats excluding priming coat on new work (HSR 16.53)

Distempering with washable oil bound distemper (of approved manufacture) two coats excluding priming coat on new work. (HSR 16.57)

Providing two coats of exterior acrylic emulsion paint. (Note:- First quality paint of reputed make firm such as Goodlass-Nerolac, Berger, Garware, Jenson, Nicholson, Asian & Shalimar Shall be used as approved by Engineer-in-charge in writing, Drum of paint shall be opened in presence of Engineer-in-charge). [HSR 16.79 (b)].

Providing and applying two coats white cement based putty over plastered surface and grindling the surface smooth with sand paper to get an even and smooth finish including cost and carriage of all material, labour charges, scaffolding, sundries etc. complete. (Note:- reputed make Putty such as J.K./ Birla shall be used as approved by Engineer-in-charge). (HSR 16.81).

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded build up standard tubular sections / appropriate Z sections and other sections of approved make conforming to IS;733 and IS; 1285 fixed with rawlplugs and screws or with fixing clips or with expension hold fasteners inluding necessary filling up of gaps at juncitions, at top, bottom, and sides with required neoprene felt etc. Aluminium sections shall be smooth, rust free straight mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panclling C.P. brass / stainless steel screws, all complete. Fixed portion (Anodised Aluminium transparent or dyed to required shade according to IS;1868, minimum anodic coating of grade AC 15) [HSR 17.95]

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded build up standard tublar sections / appropriate Z sections and other sections of approved make conforming to IS;733 and IS; 1285 fixed with rawel plugs and screws or with fixing clips or with expension hold fasteners inluding necessary filling up of gaps at juncitions, at top, bottom, and sides with required neoprene felt etc. Aluminium sections shall be smooth, rust free straight mitered and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling C.P. brass / stainless steel screws, etc. complete. Shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of PVC/ neoprene gasket required including Aluminium fitting. [HSR 17.96] +Note 1)

Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS; 12823 grade 1 type II in paneling fixed in aluminium doors, Windows shutters and partition frames with c.p brass / stainless steel screws etc. complete. (HSR 17.97(b)) Pre-laminated particle board with decorative lamination on both sides.

Providing and fixing glazing in aluminium door, windows, ventilators shutter and partitions etc. with pvc/neoprene gasket etc. complete (cost of aluminium snap beading shall be paid in basic items) [HSR 17.98] b) With float glass panes of 5.0mm thickness

Providing and fixing double action hydraulic floor spring of apprved brand and manufacture IS:6315 marked for doors including cost of cutting floors as required, embedding in floors and cover plates with brass pivot and single piece M.S. sheet outer box [HSR 17.99] b) With Brass cover plate

Providing and fixing aluminium round shape handle of outer dia 100mm with screws etc. complete. [HSR 17.102] Powder coated minimum thickness 50 micron aluminium

Wrought iron and mild steel(using angles, flats ,square bars , tee and channels) ladders, grills, gratting frames, window guards, iron doors openable or fixed stair case or parapet or any other type of railing, gates and tree guards etc., including cost of screws and welding rods or bolts and nuts complete fixed in position (HSR 18.12)

Steel reinforcement TMT bars FE-500 FQR /FE-500 D grade or more for RCC work, where no included in the complete rate of RCC including straightening, bending binding, wastage, overlaps, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire etc. and placing in position complete in all respects for all heights/depths/storeys/basements etc. (HSR 18.22) (Note:- Reinforcement shall be measured in length including hooks, if any, separately for different diameters as actually used in work, excluding overlaps, wastage, overlaps, couplings, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire or other methods for binding and placing, shall not be measured and cost of these items shall be deemed to be included in the rates for reinforcement).

Providing and fixing in position best indian make (as approved by the Engineer-in-charge) European type water closet suite, Syphonic type, consisting of- (i) Vitreous China Ware Syphonic Suite with 15 Liters capacity matching chinaware cistern and all internal brass fittings complete with ‘P’ or ‘S’ trap with or without vent (as approved by the Engineer-in-charge). (ii) One Piece seat and lid in hollow black or white with plastic fitted with chromium plated hinges and rubber buffers,(to the approval of the Engineer-in-charge). Complete in all respects including cutting and making good the walls and floors [HSR 30.5] a) Single trap syphonic W.C. Suite (i) White

Providing and fixing in position best Indian make (ordinary)lavatory suites, consisting of Lavatory in vitreous chinaware size as given below (to the approval of the Engineer-in-charge) including china plug for tap hole where necessary. R.S. or C.I. Brackets for building into wall including painting, 32mm C.P. brass waste with C.P brass chain and rubber plug, 15mm C.P. brass screw down pillar tap with jamnuts or couplings best design (as approved by the Engineer-in-Charge). All fittings best Indian make and; to the approval of the Engineer-in-Charge. All brass work chromium plated and complete in all respect including cutting and making good the walls floors and painting of fittings etc. [HSR 30.41] a) white (i) Size 450mm x 300mm with one tap.

Providing and fixing in position best Indian make Soap dish fixed into wall with C.P. brass screws and complete in all respects including cutting and making good the wells etc. [HSR 30.70] a) C.P. Brass (i) Soap dish large

Providing and fixing in position best Indian make bevelled edge 5.5mm thick mirror mounted on asbestos sheet ground fixed in position by means of 4 Nos. chromium plated brass screws and washers over rubber washers and rawl plug embeded in the wall or chromium plated brass clamps with C.P brass screws (as required by the Engineer-in-charge) complete including cutting and making good the walls etc. [HSR 30.71] a) Indian make (i) 600 x 450mm

Providing and fixing in position 15mm i/d C.P.brass & bib cocks of best quality (as required by the Engineer-in-charge). [HSR 30.75] c) Bib cock

Providing and fixing in position C.P.brass stop cock (as approved by the Engineer-in-charge) [HSR 30.76 a) 15mm stop cock (i) Stop cock male and female end

Providing and fixing of Colour coated sheets ( PPGL) are painted GAL, Value 0.6mm thick including nut, bolt, angle joints, paint etc. complete in all respect to the entire statisfaction of Engineer-in-Charge. ( N.S)

Providing for laying, jointing, fixing and testing G.I. (Medium class "B" type of Tata & Jindal make) pipe lines and specials tees bends, sockets, elbows etc. inside building and testing etc. complete including cutting threading. Including cost of Special. G.I. specials shall be of Make:- UNIK, TATA, ZOLOTO. (NS) (i) 15 mm internal diameter of pipeline Note:- 1. In case of any difference in the unit & nomenclature of any of the HSR Items of Civil, P.H. work depicted in this DNIT and that given in HSR, the unit and nomenclature given in HSR shall be applicable. 2. Only reputed make material will be used (make/brand exhibited in HSR and exhibited in approved standard document) as approved by Engineer-in-charge, while executing various items/works at site.

The Global Coop L and C Society Ltd