Widening and strenghtning of road from village Babail to Palhedi in 24 Panipat constituency, Distt. Panipat (Shifting of HT/LT line) (Under CM Annc. Code No. 26210 Dated 01.05.2022). Recall

Amount

[23.26.2]SAFETY ITEMS 2. Supply and erection of High Tension Voltage caution notice plate of size 250*200 mm in three languages.

[24.2.8.12]LT CABLE 8.12. Supply and erection of aluminium lugs heavy duty including crimping etc. up to the entire satisfaction of the Engineer-in-charge of the work. 185 sqmm

[24.3.4.1]HT CABLE 4.1. Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required :70 to 120 sqmm

Supply and erection of stay set with stay wire suitable for 9M long PCC pole made out of 7/3 SWG GI wire with U type M.S. Rod 5/8` dia duly threaded by means of angle iron of size 50 x 50 x 6 mm x 30 cm 6 feet long M.S. Rod buried in ground after fixing with cross channel size 75 x 40 x 6 mm x 60 cm long the stay wire will be binded on the top of the pole with help of suitable size of double U type M.S. Clamps and stay fixed with nuts and bolts the stay wire shall be insulated in the middle point with the help of egg insulator including all labour and material required to complete the job in all respect to the entire satisfaction of Engineer-in-charge of work.

Supply and erection of prestressed cement concrete pole as per IS : 1678-1960. 9 metres long 105 mm x 115 mm at top and 105 mm x 315 mm at bottom with working load of 200 Kg. burried 1.80 m in ground. (Make and specification as per UHBVNL/UHBVNL) including Erection of RCC/ PCC pole of following length in brick ballast and ramming the foundation, finishing with 150mm thick cement concrete (1 :3:6) layer on top with including excavation and refilling etc as required

Supply, stringing and sagging of GSL wire 8 SWG complete in all respect with erection of the same upto the entire satisfaction of the Engineer in Charge of work (Make and specification as per UHBVNL/UHBVNL)

Supply and erections of V-shape X-arm on PCC poles as per state electricity Nigam design and requirement it should be made out of MS channel size 100x50mm 13.200 Kg complete in all respect . (Make and specification as per UHBVNL/UHBVNL)

Supply and erection of 11KV GI Pin insulator with Pin Rashtriya / Jayshree / BHEL make with pin with all labor and material required to the complete the job included the fixing the same on existing channels up to entire satisfaction of the Engineer-in-Charge of the works. (Make and specification as per UHBVNL/UHBVNL)

Supply and erection of 11KV gang operated switch Rashtriya / Jayshree / BHEL make conforming to IS with latest amendment including suitable size of copper blade erection of same on the existing `H`pole with the help of 3 Nos. channels of size 75mmx40mmx6mm, 1.8M long fixed with suitable size of MS clamp, nuts and bolts including cost of 6 Nos. 11KV insulator with GI pin, RD fuses and painting with 2 coat of approved paint and one coat of red oxide material required to complete the job in all respect up to entire satisfaction of the Engineer-in-Charge of the works. (Make and specification as per UHBVNL.

Supply of Disc insulator Rashtriya / Jayshree / BHEL make with Disc fitting TandC type complete in all respect with erection of the same upto the entire satisfaction of the Engineer in Charge of work (Make and specification as per UHBVNL/UHBVNL)

Supply and erection of lighting arrestor model ALPRO / Alastem / LEMCO make suitable for 11KV 3 Phase 50 HZ ground neutral system comprising of spare gape type queen gap type in series with non linger resitar element house in Horizontally scale poreclam bushing with line and ground terminal along with mounting clamps conforming to ISS 3070 (Part-I) of 1985 with latest amendment with all labour and material required to the complete in all respect up to entire satisfaction of the Engineer-in-Charge of the works.

Supply and erection of 50 Sqmm. 3.5 core under ground aluminum Ard. cable on surface/ cable tray / pipe / trench etc. complete with necessary connections complete in all respect upto the entire satisfaction of Engineer in charge of the work makes as per approved make list attached

Supply and erection of 95 Sqmm. 3 core XLPE (E)11 KV HT aluminum conductor armoured cable ISI mark laid in existing pipe /trenches/surface with all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in-charge of the work including Laying and erection of XLPE II kv HT aluminium conductor armoured cable ISi mark laid on surface/ pipe/cable tray with all labour and material as required. makes as per approved make list attached

Supply and erection of ACSR conductor (ISI Marked) with accessories including stringing and sagging of conductor of various sizes as well as jointing and binding with insulator at support complete in all respect up to entire satisfaction of Engineer-in-charge of the work. ACSR Cond. 50 Sqmm (Make and specification as per UHBVNL/DHBVNL).

Supply and erection of MS channel 100x50mm including cutting, bending to the required shape, drilling hole, carriage Painting, loading, unloading complete in all respect upto the entire satisfaction of Engineer-in-charge. (by using steel of TATA / SAIL/RINL (Vizag) make only)

Supply and erection of MS angle 50x50x6 mm including cutting, bending to the required shape, drilling hole, carriage Painting, loading, unloading complete in all respect upto the entire satisfaction of Engineer-in-charge. (by using steel of TATA / SAIL/RINL (Vizag) make only)

Supply and erection of MS flat 50x6 mm including cutting, bending to the required shape, drilling hole, carriage Painting, loading, unloading complete in all respect upto the entire satisfaction of Engineer-in-charge. (by using steel of TATA / SAIL/RINL (Vizag) make only)

Providing and fixing of Nut and Bolt of size as per ISI specification of Engineer-in-charge. (Make and specification as per UHBVNL/DHBVNL)

Supply of prestressed cement concrete pole as per IS :1678-1960 11 metres long 152 mm x 203 mm at top and 152 mm x 368 mm at bottom with working load of 360 Kg. buried 2.20 metre in ground. (Make and specification as per UHBVNL/DHBVNL) including Erection of RCC/ PCC pole of following length in brick ballast and ramming the foundation, finishing with 150mm thick cement concrete (1:3:6) layer on top with including excavation and refilling etc as required.

Supply and erection of Earthing with earth rod Wt. 6.175 kg up-to the entire satisfaction of Engineer in-charge of the work (as per UHBVN Specifications)

Supply and erection of T/F platform set as per satisfaction of Engineer-in-Charge of the work.

Supply and erections of Top Hamper complete in all respect upto the entire satisfaction of Engineer-in-Charge.

Supply and erection of fuse unit LT side Board for use on DTs from for T/F complete in all respect. up to entire satisfaction of the Engineer-in-charge of the work.

Supply and erection of Barbed wire complete in all respect upto the entire satisfaction of Engineer-in-Charge of the work

Supply and erections of D straps complete in all respect upto the entire satisfaction of Engineer-in-Charge.

Supply and erection of LT insulator with all labour and material required to the complete the job included the fixing the same up to entire satisfaction of the Engineer-in-Charge of the works.

Dismantling of H-Pole

Dismentalling of 9/11Mtr. PCC Pole

Dismentalling of ACSR Conductor 50/80 Sqmm.

Dismantling of PVC ard. Cable 95 sqmm

Dismantling of Transformer Platform.

Erection of Transformer.