RENOVATION OF MEETING HALL FOR CM LOK MILNI AT OLD BARADARI AT DISTRICT JALANDHAR

Select, At Par, Excess (+), Less (-) IOCL

Tender Inviting Authority :- EXECUTIVE ENGINEER PROVINCIAL DIVISION PWD B&R JALANDHAR

Name of Work :- DNIT FOR RENOVATION OF MEETING HALL FOR CM-LOK MILNI AT OLD BARADARI AT DISTRICT JALANDHAR

Contract No: Civil Works

Name of the Bidder/ Bidding Firm / Company :

Sl. No. Work Name Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category

2 Scraping (c) Cement plaster 3 Sqm Excess(+) Full Conversion INR

3 12.5 mm thick cement plaster 1:5 4 Sqm Excess(+) Full Conversion INR

4 20mm thick cement plaster 1:5 in two coat work 5 Sqm Excess(+) Full Conversion INR

5 Terracing consiting of tiles 22.86x11.43x3.83cm laid over 25 mm mud plaster 7.5 cm mud filling on another layer of 25mm mud plaster including two coats of bitumen laid hot at 1.65 Kg. /Sqm top of R.C.C. slab including grouting with cement sand mortar 1:4 and top surface to be left clean after wire brushing 6 Sqm Excess(+) Full Conversion INR

6 Providing and laying vitrified floor tiles in different sizes in light colour shades made using Soluble Salt Technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. ( Soluble salt Print Penetration should be up to 1 to 2 mm after the tiles are fired & polished ). a Size 600x600 mm 7 Sqm Excess(+) Full Conversion INR

7 Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflection > 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire erformance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘T’. The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the engineer-in-charge. i With 16 mm thick beveled tegular mineral fibre false ceiling tile (NRC 0.55 to 0.6) size 595x595 mm 8 Sqm Excess(+) Full Conversion INR

8 Renewing wooden battens in roof including making good the holes in wall and painting with oil type wood preservative of approved brand and manufacture complete including removal of rubbish to the dumping ground with in 50 Metre lead (c) Ist class Kail wood battens 9 0.5999 Cum Excess(+) Full Conversion INR

9 Providing and Fixing of P.V.C Wall Penelling upto 10' Height complete in all respect as per satisfaction of engineer-in-charge. 10 Sft Excess(+) Full Conversion INR

10 First class burnt brick work laid in cement sand mortar 1:6 in first storey upto 4 metres above plinth level 11 0.999 Cum Excess(+) Full Conversion INR

11 Chowkats of Imp. Teak Wood confirming to ISI specification no 1003 m kiln seasoned of doors and windows including iron hold fasts, corner straps cleats, stops bolts for hold fasts etc, complete fixed in position 12 Metre Excess(+) Full Conversion INR

12 Factory manufactured solid flush door fixed in position iron hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position (Code :IS 2202-1 (1999): (a) Commercial with elm or gurjan facing on both \ Sides with laminated core and lipped edges:- (iv) 35mm thick 13 Sqm Excess(+) Full Conversion INR

13 Wire gauze deodar wood door shutter without springs housed in chowkats (Single Leaf) i 35 mm thick 14 Sqm Excess(+) Full Conversion INR

14 Providing and fixing ply wood, plain lining, butt jointed including PVC Plug placed at 45 cm to 65 cm centers complete with necessary nails (Frame work shall be payable extra) (b) 6mm thick decorative ply wood teak faced on one side. 15 Sqm Excess(+) Full Conversion INR

15 Preparation of plywood surface for painting including sand papering the surface and applying filling with approved quality fillers consisting of white lead, linseed oil, Varnish, and Chalk Mitti including finishing the surface to required finish complete. 16 Sqm Excess(+) Full Conversion INR

16 Spirit polishing two coats including a coat of wood filler on wood work 17 Sqm Excess(+) Full Conversion INR

17 Cost of aluminum fittings complete for doors, windows such as tower bolts, handles,Stoppers and screw etc. for these fittings (Excluding sliding bolt) ii) For shutter area above 0.50 sqm 18 Sqm Excess(+) Full Conversion INR

18 Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish 19 Sqm Excess(+) Full Conversion INR

19 Wall painting with plastic emulsion paint of approved brand and manufacturer to give an even shade (two or more coats) 20 Sqm Excess(+) Full Conversion INR

20 Providing and fixing bright finished brass 100 mm mortise latch and lock with 6 levers and a pair of lever handles with necessary screws etc. complete (best make of approved quality). 21 Each Excess(+) Full Conversion INR

21 Finishing walls with acrylic smooth exterior paint of required shade with two or more coats applied @ 1.67 litre/10Sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 Sqm 22 Sqm Excess(+) Full Conversion INR

22 Applying pink primer or aluminum priming coat on wood work including preparation of surface knotting and stopping etc. 23 Sqm Excess(+) Full Conversion INR

23 Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade. 24 Sqm Excess(+) Full Conversion INR

24 Providing and fixing hydraulic door closer ISI mark with necessary screw etc. Complete (b) I.S.I Designation No. II (size of door 701mm to 850mm) 25 Each Excess(+) Full Conversion INR

25 Providing & fixing 6" stainless steel handles ISI marked on door & windowframes complete in all respect as per the directions of Engineer-in-charge. 26 Each Excess(+) Full Conversion INR

26 Providing & fixing 8" stainless steel tower bolts ISI marked on door & window frames complete in all respect as per the directions of Engineer-in-charge. 27 Each Excess(+) Full Conversion INR

27 Wrought iron & Mild steel ladders, framed grills, gratings etc. with ends of bars riveted or molded forged framed window guards, barred iron doors stair case iron railing etc. including cost of bolts and nuts, screws, welding rod complete fixing in position 28 0.000 Qtl Excess(+) Full Conversion INR

28 Providing and fixing ( PPGL) precoated painted galvalume sheet roofing (size, shape and pitch of corrugation as approved by Engineer-in-charge) The end rib shall have anti cappillary groove and return leg. The steel sheet must be having yield strength of 550 MPa ( Fy= 550 MPa) metallic coated with Zinc- Aluminium alloy ( i.e. 55% Al, 43.4%Zinc, 1.6% Si-Zincalume) AZ150 ( Min. 150 bm/mm2 total on both sides), pre painted with super Durable Polyster XRW quality paint includes inorganic infrared reflective pigment. The sheet confirms to general requirement of AS/NZS 2728 type 4/ IS 15965 class 3 durability and gloss value of 25% -40%. should be supplied in single length upto 12 metre or as desired by Engineer-incharge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. (a) 0.50 mm (+ 0.05 %) thick 29 Sqm Excess(+) Full Conversion INR

29 Water proofing treatment of Roof Slab with High performance cementitious two component product, consisting of a powder component and an acrylic polymer using two coats ( Dr Fixit Roofseal flex - Packaging Size: 12 .5 kg (7.5 kg powder + 5 kg polymer) / equivalent water proofing Solution ). The slurry thus formed by mixing the two, is to be applied on new roofs to forms a seamless, highly elastic, non-toxic waterproofing layer on the roof with a life expectancy of 7 years. The work shall be carried out all complete as per specification and the direction of the Engineer-in-charge. 30 Sqm Excess(+) Full Conversion INR

30 PUBLIC HEALTH WORK 31

31 Dismantling & Civil Work 32

32 Dismantling Sanitary fixtures such as Eurpoean/Indian/Orissa W.C., PVC / China ware cistern, Wash Hand Basin, Urinal Pot, Sinks and CP Fittings and disposal of dismantled material within a distance of 100 Mtr. complete in all respect as required by Engineer-in-Charge. 33

33 Eurpoean/Indian/Orissa W.C., 34 1 Each 230.7165 Excess(+) Full Conversion INR

34 Wash Hand Basin / Urinal Pot 35 1 Each 114.8315 Excess(+) Full Conversion INR

35 CP Bib Cock/Angle Cock/Stop Cock/Shower/Bottle Trap 36 5 Each 330.799 Excess(+) Full Conversion INR

36 Bathroom Assessories such as Soap Dish, Towel Rail, Towel Ring, Towel Bracket, Mirror, Toilet Paper Holder, Seat Cover, Jet Pressure and all other accessories. 37 6 Each 23.177 Excess(+) Full Conversion INR

37 Flooring & Tiles 38

38 Base course of floor consisting of 100mm thick cement concrete 1:8:16 and 100mm sand filling using mechanical mixer for mixing of material 39 0.000 Sqm Excess(+) Full Conversion INR

39 Providing and laying Anti skid Ceramic floor tiles of size 300x300 mm x 10 mm thick of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on flooring skirting and dado in 12.5mm thick cement plaster 1:3 in base and jointed with @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., completewhite cement slurry in joints including corners angles and beading. 40 sqm "`"\ #,##0.00 Excess(+) Full Conversion INR

40 Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/Highlighter/emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 450 x 310 mm as approved by Engineer-in- Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement:4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. 41 Sqm Excess(+) Full Conversion INR

41 Sanitary Installations 42

42 Providing and fixing in position Chinaware European type water closet P trap or S trap of approved make (to the approval of the Engineer-in-charge) consisting of 10 ltr. PVC flushing cistern ISI marked, PVC short bend 32 mm dia including cost of seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge. 43 Nos "`"\ #,##0.99 Excess(+) Full Conversion INR

43 Providing and fixing jet spray with 2'-6" long PVC pipe.With C.P. Brass nut 44 Nos "`"\ #,##0.00 Excess(+) Full Conversion INR

44 Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) consisting of C.P. brass waste 32mm dia with one C.P. brass pillar tap including Rack Bolt Screw Pair 115mm long complete in all respect. 45

45 Size 550 mm x 400 mm x 815 mm 46 Nos "`"\ #,##0.99 Excess(+) Full Conversion INR

46 Providing and fixing vitreous chinaware pedestal of approved make (to the approval of Engineer-in-charge) for wash hand basin complete in all respect. 47

47 Vitreous chinaware standard white pedestal for wash hand basin 48 Nos "`"\ #,##0.99 Excess(+) Full Conversion INR

48 Providing & fixing in position PVC flexible tube connection of approved make (to the approval of Engineer-in-charge ) complete in all respect. (e) PVC tube connection of size 15 mm x 300 mm with C.P. Brass nut 49 Nos "`"\ #,##0.00 Excess(+) Full Conversion INR

49 Providing and fixing P.V.C Waste Pipe Collapsiable 32mm complete in all respect.. 50 Nos "`"\ #,##0.99 Excess(+) Full Conversion INR

50 Providing and fixing in position C.P. brass soap dish of approved make (to the approval of Engineer-in-charge ) fixed into wall with rawl plugs and C.P brass screws complete in all respect. 51 Nos "`"\ #,##0.00 Excess(+) Full Conversion INR

51 Providing & Fixing in postion 15 mm i/d bib cock of approved make (to the approval of Engineer-in-charge )complete in all respect. 52

52 C.P. brass Bib cock long nose/ long body foam flow without flange 53 Nos "`"\ #,##0.00 Excess(+) Full Conversion INR

53 C.P. brass Bib cock foam flow without flange 54 Nos "`"\ #,##0.99 Excess(+) Full Conversion INR

54 Providing & Fixing in postion stop cock / Angle valve of approved make (to the approval of Engineer-in-charge ) complete in all respect. 55

55 C.P.brass 15mm Concealed stop cock with flange. 56 Nos "`"\ #,##0.00 Excess(+) Full Conversion INR

56 C.P.brass 15mm Angle valve without flange 57 Nos "`"\ #,##0.00 Excess(+) Full Conversion INR

57 Providing & Fixing in position C.P. Brass flange Dome of approved make (to the approval of Engineer-in-charge ) under various fixtures complete in all respect. 58 each "`"\ #,##0.00 Excess(+) Full Conversion INR

58 Providing & Fixing in position C.P. Brass extension piece 25mm long to 100mm long of approved make (to the approval of Engineer-in-charge )with various fixtures complete in all respect. i) C.P. Brass extension piece, 25mm long to 50mm long 59 each "`"\ #,##0.99 Excess(+) Full Conversion INR

59 Providing & Fixing in position 5mm thick bevelled edge mirror of superior glass (of approved make) complete with 4mm thick hard board backing fixed in with rawl plugs 50mm, C.P. brass screws and washers and S/S Studs on top complete in all respect (as required by the Engineer-in- Charge) (a) Size 600mmx450mm 60 Nos "`"\ #,##0.00 Excess(+) Full Conversion INR

60 Providing and fixing in position automatic brass Ball Cock in tanks. 20 mm i/d B Brass Ball Cock with rod and Plastic Ball 61 Nos "`"\ #,##0.00 Excess(+) Full Conversion INR

61 Providing and fixing in position towel rails / ring of approved make (to the approval of Engineer-in-charge ) fixed in with rawl plugs embedded in walls with brass screws complete in all respect. 62

62 C.P brass towel ring 63 1 Each "`"\ #,##0.00 Excess(+) Full Conversion INR

63 Providing & Fixing in postion liquid soap container of approved make (to the approval of Engineer-in-charge ) complete in all 64

64 C.P. brass liquid soap container 65 1 Each "`"\ #,##0.00 Excess(+) Full Conversion INR

65 Providing and fixing in position premium range C.P. Brass Fittings and accessories of approved make (to the approval of Engineer-in-charge ) complete in all respect. 66

66 C.P. Brass Fittings: 67

67 C.P. brass 3-Hole Basin Mixer Without Popup Waste System 68 1 Each "`"\ #,##0.99 Excess(+) Full Conversion INR

68 C.P. Brass Accessories: 69

69 C.P. brass towel rail 600mm long 70 1 Each "`"\ #,##0.99 Excess(+) Full Conversion INR

70 Providing and fixing in position C.P. Acrylic shelf with C.P.bracket and guard rails of approved make (to the approval of Engineer- in-charge ) fixed in with rawl plugs and C.P brass screws complete in all respect. 71

71 C.P. brass Glass Corner with rail 8 mm thickness and height 250 mm 72 1 Each "`"\ #,##0.00 Excess(+) Full Conversion INR

72 Providing & Fixing in position C.P. Brass Hexa Nipple 15mm of approved make (to the approval of Engineer-in-charge ) complete in all respect. 73 2 Each "`"\ #,##0.99 Excess(+) Full Conversion INR

73 Providing and fixing in postion storage type automatic electric water heater pressure / non pressure type thermostatically controlled, single phase, vertical wall mounted of approved make (to the approval of Engineer-in charge) with thermostats, inner container of stainless steel complete with 1 Mtr. three core flexible cord with plug, non return valve and pressure release valve complete including fixing and testing complete in all respect. 74

74 25 litre capacity water heater 75 1 Each Excess(+) Full Conversion INR

75 Providing and fixing in position C.P. brass overhead shower round or square 1 flow without shower arm with 15mm i/d inlet of approved make (to the approval of Engineer- in-charge) complete in all respect. 76

76 CP Brass rain Fall Shower without arm 6" square 77 1 Each Excess(+) Full Conversion INR

77 Providing and fixing in position C.P. brass overhead shower arm chrome round or square with 15mm i/d inlet of approved make (to the approval of Engineer-in-charge) complete in all respect. 78

78 CP Brass overhead shower arm 15" sqaure 79 1 Each Excess(+) Full Conversion INR

79 CONCEALED IN WALL: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes as per IS 15778 (ISI marked with the prior approval of Engineer-in- Charge), having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing including jointing of pipes & fittings, with one step CPVC solvent cement and testing of pipes complete as per direction of Engineer-in-Charge. 80

80 CPVC SDR 11 Pipe & fitting 20mm o/d 81 35 mtr 233.19 Excess(+) Full Conversion INR

81 INTERNAL - EXPOSED ON WALL: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes as per IS 15778 (ISI marked with the prior approval of Engineer-in- Charge), having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing including jointing of pipes & fittings, with one step CPVC solvent cement and testing of pipes complete as per direction of Engineer-in-Charge. 82

82 SDR 11 CPVC Pipe & fitting 20 mm o/d 83 10 mtr 191.97 Excess(+) Full Conversion INR

83 Cutting chase in brick walls in cement or in floor for embedding G.I. or C.I pipes line and making good the same to its original condition.Size 75mm x 75mm 84 30 mtr 72.69 Excess(+) Full Conversion INR

84 Cutting holes upto 23cm square through B.B. in cement walls or stone masonary wall in cement for pipes, and making good the same & finishing according to existing finish where required. 85

85 Through wall 11.43 cm thick 86 2 nos 176.42 Excess(+) Full Conversion INR

86 Providing, fixing and jointing Brass Ball valves screwed with SS/BRASS ball & spindle & Teflon seats, on G.I. Pipe lines including all carriages complete. 87

87 20mm i/d Brass Ball valves 88 Each 356.75 Excess(+) Full Conversion INR

88 Internal Water Supply & Sewerage & Terrace Tanks 89

89 Providing and fixing in position singel socket SWR UPVC soil waste or antisyphonage pipes as per IS 13592 of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of jointing. 90

90 Single Socket Type B 91

91 110mm o/d SWR UPVC pipe lines laid complete 92 mtr 396.16 Excess(+) Full Conversion INR

92 90mm o/d SWR UPVC pipe line laid complete 93 mtr 344.69 Excess(+) Full Conversion INR

93 Providing and fixing in position SWR UPVC special for soil waste vent or anti syphonage pipes as per as per IS - 14735 including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining. 94

94 For 110mm o/d pipes 95

95 Elbow 90 Degree (All side socketed) 96 Each 162.57 Excess(+) Full Conversion INR

96 Single Tee 97 Each 206.15 Excess(+) Full Conversion INR

97 P Trap/Floor Trap 110mm x 110mm 98 Each 338.38 Excess(+) Full Conversion INR

98 P Trap/Floor Trap 110mm x 75mm 99 Each 309.99 Excess(+) Full Conversion INR

99 110mm x 75 mm Reducer Tee 100 Each 198.16 Excess(+) Full Conversion INR

100 For 90mm o/d pipes 101

101 Single Tee 102 Nos 184.86 Excess(+) Full Conversion INR

102 Elbow 90 degree (all side socket) 103 Nos 119.09 Excess(+) Full Conversion INR

103 Dismantling Concrete 104

104 Cement Concrete plain mix 1:2:4 105 Cum 1438.03 Excess(+) Full Conversion INR

105 Providing and fixing in position SS Grating with frame of approved make (to the approval of engineer in charge) complete in all respects. 106 4 Each Excess(+) Full Conversion INR

106 AIR CONDITIONER IN MEETING HALL AND WAITING ROOM OF CM RESIDENCE 107

107 Providing & Installing 3 Star split type wall mounted air conditioner capacity 2.0 tonne with arrangement for installing OD units including connection of inlet and outlet copper tubes (Rate is inclusive of copper pipe 3.00mtrs and cable upto 3.00mtrs length ) with proper insulation, cable link between ID unit and OD units stand for OD unit and concealing of Copper pipes and drainage pipe within building and installing charges complete in all respects 108 Each "`"\ #,##0.00 Excess(+) Full Conversion INR

108 Providing & Installing 3 Star split type wall mounted air conditioner capacity 1.5 tonne with arrangement for installing OD units including connection of inlet and outlet copper tubes (Rate is inclusive of copper pipe 3.00mtrs and cable upto 3.00mtrs length ) with proper insulation, cable link between ID unit and OD units stand for OD unit and concealing of Copper pipes and drainage pipe within building and installing charges complete in all respects 109 Each "`"\ #,##0.00 Excess(+) Full Conversion INR

109 AUTOMATIC VOLTAGE STABLIZER: 110

110 Supply and erection of Single phase copper wound Automatic voltage stablizer of suitable capacity electronically controlled circuit with input voltage 140-260 volts single phase AC supply and output voltage 220 ± 5% volts single phase AC supply having main silicon core copper wound step up transformer with suitable nos. of turns on primary side and secondary side the transformer should be fully insulated inside the MS sheet box of suitable size. There should be power control relay and single pole MCB (C-curve, 10kA) of suitable capacity complete with internal copper wiring along with amp. meter and volt meter, high voltage cut off 280 volt input (240 volt output) and 90 volt maximum boost and overloading protection to be provided:- 111

111 Automatic Voltage Stablizer 5 KVA 112

112 For Air Conditioner 113 7 Each "`"\ #,##0.99 Excess(+) Full Conversion INR

113 Providing, laying, jointing, fixing and testing uPVC Pipe with G.I. specials as per ISI-4985, including cost of G.I. specials such as tees, bends, sockets, elbows etc. testing inside building complete. 114

115 For 1.50 and 2.00 tonne split AC 116 Mtr "`"\ #,##0.00 Excess(+) Full Conversion INR

116 Providing laying hard soft copper concealing of copper pipes of dia 12.7mm od (insulation = 13mm)/9.5mm od (insulation = 13m) as per requirement and wall thickness 0.8mm, insulated, 4mm electric wire sheathed 3 core double insulated / taping laying in chase cutting of wall and repairing the same within the building and installing charges complete in all respects. 117 Mtr "`"\ #,##0.00 Excess(+) Full Conversion INR

117 ELECTRICAL WORK 118

118 D1- Renovation of Existing Electrical Installation 119

119 RECESSED PVC CONDUIT PIPE WIRING SYSTEM WITH MODULAR SWITCHES: 120

120 Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge PVC conduit pipe 20mm/ 25mm dia. (ISI Marked) recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), Circular junction Boxes (Four way PVC 1½" deep for walls and CI 3" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):- 121

121 Wiring fan point (Without fan box) 122 Each Excess(+) Full Conversion INR

122 Wiring light point 123 Each Excess(+) Full Conversion INR

123 Wiring 6Amp. wall socket point 124 Each Excess(+) Full Conversion INR

124 Wiring 6Amp. Plug control comprising wall socket point 125 Each Excess(+) Full Conversion INR

125 Wiring 16/20Amp. power plug control point 126 Each Excess(+) Full Conversion INR

126 RECESSED AIR CONDITIONER SUPPLY TERMINAL POINT (USED FOR HGW, PVC CONDUIT & HDPE PIPE WIRING SYSTEM WITH MODULAR ACCESSORIES): 127

127 Wiring air conditioner supply terminal point recessed in wall etc., complete with powder coated/anodized concealed metal boxes required for suitable number of modules (Modular accessories) for having 25Amp. combined/ universal Socket (shuttered) and modular motor starter 25Amp. (2Module), covered with Frame Plate and other petty material etc. including the cost of above material, cutting and filling up of chases (with finishing the surface):- 128

128 Wiring AC supply terminal point having 1No. 25Amp. universal Socket (shuttered) erected at AC height and 1No. Motor starter 25Amp. erected at switchboard height. 129 Each Excess(+) Full Conversion INR

129 RECESSED COMPUTER SUPPLY TERMINAL POINTS (USED FOR HGW, PVC CONDUIT & HDPE PIPE WIRING SYSTEM WITH MODULAR ACCESSORIES): 130

130 Wiring Computer supply terminal points recessed in wall etc., complete with powder coated/anodized concealed metal boxes required for suitable number of modules (Modular accessories) for having 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10/16/20Amp. Switches and blanking plate etc., and covered with Frame Plate and other petty material etc. including the cost of above material, cutting and filling up of chases (with finishing the surface):- 131

131 Wiring Computer terminal point having 3 Nos. 6Amp. 2/3 universal socket (shuttered), 1No. 16 Amp. switch with indicator and 1No. blanking plate (Modular accessories). 132 Each Excess(+) Full Conversion INR

132 RECESSED TV, TELEPHONE & NETWORKING SOCKETS OUTLET POINTS (USED FOR HGW, PVC CONDUIT & HDPE PIPE WIRING SYSTEM WITH MODULAR ACCESSORIES): 133

133 Supply and erection of TV socket, Telephone socket and Networking socket points in powder coated/anodized concealed metal boxes recessed in wall required for suitable number of modules (Modular accessories) for having TV sockets, Telephone sockets RJ11 & Networking socket RJ45 (one module), covered with Frame Plate and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):- 134

134 Wiring Networking socket point RJ45 (one module) 135 Each Excess(+) Full Conversion INR

135 Wiring Telephone socket point RJ11 (one module) 136 Each Excess(+) Full Conversion INR

136 PVC INSULATED FR COPPER CONDUCTOR CABLES: 137

137 Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:- 138

138 Overall size 1.5sq.mm (Un-sheathed) 139 P.Mtr Excess(+) Full Conversion INR

139 Overall size 2.5sq.mm (Un-sheathed) 140 P.Mtr Excess(+) Full Conversion INR

140 Overall size 4sq.mm (Un-sheathed) 141 P.Mtr Excess(+) Full Conversion INR

141 Overall size 6sq.mm (Un-sheathed) 142 P.Mtr Excess(+) Full Conversion INR

142 Overall size 10sq.mm (Un-sheathed) 143 P.Mtr Excess(+) Full Conversion INR

143 XLPE INSULATED UN-ARMOURED CABLES (ON SURFACE): 144

144 Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed Un-armoured and served cable 1100 volts grade as per IS 7098 (Part-1)1988 to be laid (On Surface) as per PWD General Specifications:- 145

145 Overall size 10sq.mm (2Core) Un-armoured (On-Surface) 146 P.Mtr Excess(+) Full Conversion INR

146 Overall size 50sq.mm (3½ Core) Un-armoured (On-Surface) 147 P.Mtr Excess(+) Full Conversion INR

147 PVC, HDPE PIPES & PVC FLEXIBLE PIPES: 148

148 Supply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General Specifications:- 149

149 Heavy Gauge PVC Conduit Pipe 25mm dia. (Flushed) 150 P.Mtr Excess(+) Full Conversion INR

150 G.I. EARTHING: 151

151 Earthing with G.I. wire/ rope in G.I. pipe partly recessed and partly on surface complete with 150cm long 50mm dia. G.I. earth pipe (Cutting threads and 36 Nos. holes, 1cm dia. to make a mesh around the GI Pipe) with G.I. reducing socket including erection of the same, 4.50 metre (14.76 feet) below ground level with 20Kg. charcoal & salt mixture etc., up to 8 metre in length (including boring & refilling). 152

152 Earthing with 8 S.W.G. (4mm dia.) G.I. wire in 15mm dia G.I. pipe with G.I. reducing socket 50mm x 15mm (upto 8Metre in length) 153 Each Excess(+) Full Conversion INR

153 Fixing additional length of earthing with G.I. wire/ rope in G.I. pipe (On Surface) with sockets, elbows and MS saddle clamps including painting etc. 154

154 Additional length G.I. wire 8 S.W.G. (4mm dia.) in 15mm dia. G.I. pipe (On Surface) 155 P.mtr Excess(+) Full Conversion INR

155 MINIATURE CIRCUIT BREAKERS: 156

156 Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:- 157

157 MCB Single Pole 6-32amp. (10kA, Curve-C) 158 Each Excess(+) Full Conversion INR

158 MCB Four Pole 50, 63amp. (10kA, Curve-C) 159 Each Excess(+) Full Conversion INR

159 SHEET METAL DOUBLE DOOR DISTRIBUTION BOARD FOR MCB's/ RCBO's/ RCCB's: 160

160 Supply and erection of sheet metal Double Door Distribution Boards IP 43-IK09 metal door (dust protected) as per IS 8623-1&3, IEC 61439-1&3 suitable for flush mounting with fully insulated copper busbars, shrouded neutral bars, earth bars, cement spill protector, color-coded interconnecting wire set, cable ties, blanking plates and circuit identifications label and of required no. of ways for mounting miniature circuit breakers/ RCBO's/ RCCB's in the distribution board (For SP&N distribution board with provision DP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings and for TP&N horizontal distribution board with provision TPN/ FP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings) as per PWD General specifications including connections with suitable size of thimbles and bonding to existing earth etc:- 161

161 TP&N Horizontal Double Door Distribution Board 4 way each 162 Each Excess(+) Full Conversion INR

162 TP&N Horizontal Double Door Distribution Board 6 way each 163 Each Excess(+) Full Conversion INR

163 Supply and erection of AC Ceiling Fan 1200mm (48")-3star suitable for 230 V single phase with double ball bearing, copper wound, full aluminium body 3Nos of blades, white in colour. The mounting type is down rod mount. The product should possess a minimum air delivery of 218 CMM. The rated speed of the the product must be minimum of 350 revolutions per minute and 5Nos. of speeds. The product should be complete in all aspects with fan motor, bladeset down rod, conopy set, shackle kit, twisted wire etc., including erection & testing of ceiling fan having connection with PVC insulated PVC sheathed two single core copper conductor (FR) cable 0.75 sq. mm complete in all respects as per satisfcation of the Engineer in-charge at site. 164 Each Excess(+) Full Conversion INR

164 Supply and erection of LED batten 40watt LED (including LED driver) with High quality extruded aluminium with efficacy of LED fixture minimum 100 lumens per watt and operating voltage between 140 to 270 volt, input AC frequency 50 Hz ± 3 %. complete along with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site.The certification and Specifications of the LED Fitting's should be as approved by O/o Advisor (Technical), Govt of Punjab vide Letter no.AT/2021/GL/1410-1422 Dated 06/05/2021. Besides this the lighting fixture manufacturer should have inhouse NABL accredited lab. 165 Each Excess(+) Full Conversion INR

165 Supply and erection of LED batten 20 Watt LED (including constant LED driver) with High quality extruded aluminium with efficacy of LED fixture minimunm 100 lumens per watt and operating voltage between 140 to 270 volt, THD <10% ingress protection IP20 (as per latest BIS standards) surge protection - 2.5 KV and above (as per IS/IEC standards) wattage of each low power LED less than 1 watt input AC frequency 50 Hz ± 3 % with 5 year warranty including there drivers complete along with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site. LED Fitting as per Specifications approved by Hon. Tech. Advisor to CM Punjab vide Letter ION No: AT/2021/GL/1410-1422, Dated: 06.05.2021. Besides this the lighting fixtures manufactures should have in house NABL accredited laboratory. 166 Each Excess(+) Full Conversion INR

166 Supply and Erection of Venti Air Fan 250mm with louver shutter longer life including flexible wire & petty material etc. for connections and testing complete in all respect as approved and desired by the engineer in-charge at site. 167 Each Excess(+) Full Conversion INR

167 Supply and erection of Recessed Mounted 2FT X 2 FT 36 Watt LED (including constant LED driver) with High quality extruded aluminium with efficacy of LED fixture minimunm 100 lumens per watt and operating voltage between 140 to 270 volt, THD <10% ingress protection IP20 (as per latest BIS standards) surge protection - 2.5 KV and above (as per IS/IEC standards) wattage of each low power LED less than 1 watt input AC frequency 50 Hz ± 3 % with 5 year warranty including there drivers complete along with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site. LED Fitting as per Specifications approved by Hon. Tech. Advisor to CM Punjab vide Letter ION No: AT/2021/GL/1410-1422, Dated: 06.05.2021. Besides this the lighting fixtures manufactures should have in house NABL accredited laboratory. 168 Each Excess(+) Full Conversion INR

168 Supply and erection of LED Flood Light 50watt (including LED driver),Pressure Die cast aluminium with efficacy of LED fixture more than or equal to 120 lumens per watt and operating voltage between 140 to 270 volt, input AC frequency 50 Hz ± 1 % complete along with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site.The certification and Specifications of the LED Fitting's should be as approved by O/o Advisor (Techlical), Govt of Punjab vide Letter no. AT/2021/GL/1410-1422 Dated 06/05/2021. Besides this the lighting fixture manufacturer should have inhouse NABL accredited lab. 169 Each Excess(+) Full Conversion INR

169 Supply and erection of SMC Junction Box (Glass Fibre reinforced polyester sheet moulding compound) confirm to IS:14772 (Recessed/ On surface), robustly constructed, safe & shock proof, rust & tamper proof of suitable inner & outer dimensions with ± 10% tolerance in size & hinged water tight cover with locking arrangement having 1No. terminal strip with 4Nos. terminals & 1No. Single pole MCB of required capacity fixed on din bar (Din Bar Provision for 2Nos. MCB's) complete in all respect as approved and desired by the Engineer In-Charge at site:- 170

170 SMC Junction Box (Glass Fibre reinforced polyester sheet moulding compound) confirm to IS:14772, inner dimensions 140mm x 140mm x 95mm with hinged water tight cover with locking arrangement 171 Each Excess(+) Full Conversion INR

Total in Figures

Quoted Rate in Figures Select

Please Enable Macros to View BoQ information