KBK ISL DAMAGE REPAIR.

Stripping off worm out plaster and raking out joints of walls, colings etc. upto any height and in any floor including removing rubbish within a lead of 75m as directed.

Dismantling all types of plain cement concrete works, stacking serviceable materialsat site and removing rubbish as directed within a leadot 75 m. #upto 150 mm thick On the ground floor including the roof.

Labour for taking out door and window frame Including shutter for repair or replacement of different parts of the frame & refixing the same including mending etc (e) Upto area 2.5 Sq.m

Taking out Mirzapur or glazed porcelain tiles carefully by chiselling from walls or floor including stacking serviceable material as directed.

Supplying and laying true to line and level Double Charge Vitrified Tiles of approved brand conforming to IS 15622: 2006 (Group B I a) and tested as per IS 13630:2006 (relevant parts) (Non-modular sizes for tiles with Water Absorption (av.) ≤ 0.08%) in floor, skirting etc, using polymerised adhesive of fimm thick layer applied directly over finished surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all other incidental charges complete as per direction of Engineerin-Charge. (Note: This work should not be executed without specific permission of Superintending Engineer).

Applying 2 coats of bonding agent with synthetic multifunctional rubber emulsion having adhesive and water proofing properties by mixing with watar in proportion (1 bonding agent: 4 water: 6 cement) as per Manufacturer's specification.

Plaster (lo wall, floor, celling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, In Gr, Floor (b) 20 mm thick (1) With 1:6 cement mortar # 1St Floor

Providing and fixing factory made door frame (single rebate) made of single piece extruded solid PVC profile with homogenous fine cellular structure having smooth outer integral skin having 62mm width x 32 mm thickness.. and shall be fixed to wall as per instructions of Engineer-in-charge using 100 x 8 sheet metal CSK screws.

Supplying, Fitting & Fixing 30 mm thick both side prelaminated Factory made solid Panel PVC Door Shutter consisting of outer frame made out of M.S. tubes of 19 gauge thickness and size 19 mmx19 mm for styles, top and bottom rails, M.S. frame shall have cost of steel primers of approved make a........ adhesive. An additional 5 mm th. PVC strip of 20 mm which is to be stuck on the ...solvent cement Interior side of the "C" channel using PVC solvent adhesive etc. complete excluding all necessary hardwares as per direction of Engineer-in-Charge.

Anodised aluminium butt hinges of approved quality manufactured from extruded section conforming to I.S. specification (1.3. 205/66) and fitted and fixed with cadmium plated screws: (v) 100 x 63 x 3.2mm

Anodised aluminium barrel/tower/socket bolt (full covered) of approved manufactured from extruded section conforming to I.S. 204/74, fitted and fixed with cadmium plated screws: #150mm long x 10mm dia. bolt.

Supplying Godrej mortice lock chromium plated with keys 6 levers including fitting and fixing complete.

Door stopper (Brass) .

Supplying heavy duty hydraulic double action floor spring along with top pin/set of pivots conforming to IS: 6315 or any approved make as per direction of Engineer in charge.

Supplying & laying 25 mm thick Tiles of any shade of approved quality as per relevant IS code IS: 1237-2012 laid in pattern as directed for footpath, ramp, staircase of public building(over 25 mm thick (Avg) Cement mortar (1:3) & Cement Slurry 4.4 kg/Sq.m at back side of Block. (Cement for Mortar & Slurry to be supplied by Department). in all respect Le. with all labour and material. (Border concrete if necessary to be paid seperately) Note: Sub-grade CBR should not less than 5.

Supplying fitting & fixing Eco-friendly, Humidily Resistant and Incombustable Light Weight Calcium Silicate board/tiles (Density < 600 Kg per Cum.& Sound absorption NRC-0.1 to 75) Conforming to BS 476 (Part IV, VI & VII) of approved design and brand placed in the grid module of size 600mm x 600mm to form a false ceiling, all complete as per drawing & direction of Engineer-in Charge

Taking out existing CC Interlocking paver blocks from footath/central verge including removal of rubbish etc.disposal unserviceable material to the dumping ground for which payment shall be made separately and stacking of seviceable material within 50 metre lead as per direction of Engineer-in-charge.

Laying old existing Cement concrete interlocking paver blocks of any design /shape laid in required line level curvature, colour and pattern over and including 60 mm thick compacted bed of coarse sand,filling the joints with fine sand etc. all compete as per direction of Engineer-in-charge (Old CC block supplied by the department free of cost).

Supplying and laying in the specified pattern of Interlocking Concrete Block Pavements (ICBP) with concrete blocks manufactured from BIS licence manufacturer with spacer nib (Small protruding profiles on the vertical face of paver block used as a device for keeping minimum joint gap in between the paving blocks, as per Cl. No. 3.26 of IS: 15658) and of specified size and shape with aspect ratio (The ratio of length to thickness of a paver block, as per Cl. No. 3.3 of I.S.: 15658)..... ..... joint filling sand (the grading of the joint filling sand will be as per clause 6.5.2 of IRC SP 63) and completing the edges with cut blocks as per Cl. No. 8.7 of IRC Sp-63(2018) with proper confinment of bedding and joint filling sand, compaction, levelling and filling up of the edge gap. #50 mm thick

#80mm thick Colour.

Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC #Ground Floor:# Two Coats.

Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer # Premium 100% Acrylic Emulsion.

Dismantling E.P. or Anglo-Indian W.C. #At Club-House & Gallery.

Dismantling and refixing bib cock or stop cock . #At Club-House & Gallery

Rewashering stop cock/bib cock/ push cock/ pillar cock including gland packing if necessary.

Refixing pillar cock of wash basin.

#PTMT (Polytetra Bib Cock / Stop Cock (Prayag or equivalent).

Supplying, fitting and fixing E.W.C. in white glazed vitreous chinaware of approved make complete in position with necessary bolts, nuts etc.

Supplying, fitting and fixing 10 litre P.V.C. down cistern conforming to I.S. specification with P.V.C. fittings complete, C.I. brackets including two coats of painting to bracket etc.

Supplying, fitting and fixing Closet seat of approved make with lid and C.P.# E.W.C. # Plastic (hallow type) white

Supplying, fitting and fixing Waste fittings complete. # C.P. over brass (i) 32 mm

(S&P)Refixing urinal

(S&P) Repairing C.P. hinges of W.C. seat

Repairing W.C. seat with bronze plate and screw.

Supplying, fitting and fixing low-down cistern parts. #i) Internal fittings for cistern complete of approved make.

Supplying, fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia. #600 mm long.

Supplying, fitting and fixing in position reinforced cement polymer concrete manhole /gully pit cover with matching frame.As per I.S-12592(M.D) vi) 5 MT load bearing capacity round manhole cover provided with two lifter hooks fitted with matching frame of size Cover: 565 mm X 65 mm: Frame: 665 mm X 125 mm opening: 470mm Weight: 90 kg (approx

Sub Total

Please Enable Macros to View BoQ information