SPECIAL REPAIRS TO BLDG NO OQ-27 (MAIN OFFICE) OF 2 NAGA (MASHKOH) AT JUTOGH CANTT UNDER GE JUTOGH

Amount

Demolition of brick or stone masonary built in cement mortar including all quoins arches pillars etc but excluding ashlars facing dressed stone work and precast concrete block, complete all as specified.

Stone masonry walling of squared rubble, regular coursed, well bonded, bedded and solidly hearted built in CM 1:6 complete all as specified.

Stone masonry walling of squared rubble, regular coursed, well bonded, bedded and solidly hearted built in CM 1:6 but except stone complete all as specified.

Extra over stone walling for hammer dressing with maximum depression on face from straight edge held against the dressed surface n exc 20mm to face stones and dressing of face beds and joints, of squared rubble walling, regular coursed complete all as specified.

Raised pointing to random or polygonal or squared rubble, uncoursed or brought upto courses or ashlar stone masonry or concrete block walling in 1:3 cement mortar complete all as specified.

Brick work with sub class 'B' straight or curved on plan exc 6 m mean radius built in cement mortar 1:4 complete all as specified and directed.

Dismantling plain or corrugated steel sheeting/ fibre and , any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified.

Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering bent to curve any radius with self tapping screws as specified.

Pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws as specified.

0.80 mm thick plain galvanized mild steel sheeting in ridges, hips, valley gutters, drip and straight flashing (length and girth as fixed) with grade of Zinc coating 120 gm per sqm, bent to shape as required, fixed with J / L bolts complete all as specified and directed.

Fibre glass reinforced translucent corrugated sheeting, 2mm thick, with two corrugation side laps fixed with L or J type or cranked hook bolts in roof, wall etc complete all as specified and directed.

Dismantling steel wire mesh, any type complete all as specified and directed.

Wire netting of galvanised steel wire 1.40mm dia and 20mm mesh size, fixed with tinned tacks or wire staples complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and directed.

Steel and Iron work Fe-410W (Gde-E-250) quality B in Stairs (framed) including stringers, treads, landing, balusters, hand rails etc, including cleats, brackets, etc (In lieu of decayed wooden stair case) complete all as specified and directed.

Preparation of new steel surface of any descripton over 10cm width or girth & applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified.

Dismantling timber scantlings ,framed/unframed work of size 40 sqcm and over in section , in any position with nails etc complete all as specified.

2nd class hard wood in scantlings, clean sawn in framed work including and repair to replace old and decayed timber (including piecing, scarfing etc of old and new timber if required and removing defective portions to store etc complete all as specified.

Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook and pintle hinges; large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe410-0 or Fe 310-0 complete all as specified.

Dismantling timber scantlings framed work in fillets, rails, posts rafters, purlins, etc under 40 sq cm in section in any position with nails etc complete all as specified.

Plain fillets of second class hard wood, square or rectangular in section, clean sawn, secured with nails or brads; sectional area exceeding 13 Sqcm but not exceeding 25 Sqcm including repairs or if refixed in old position complete all as specified.

Dismantling boarding, unframed work any description, fixed in any position with nails etc complete all as specified.

Boarding 40mm thick in floors and skirting at any height planed one side and edges tongued and grooved or rebated, and fixed with nails etc complete all as specified.

Second class hard wood clean sawn boarding 20mm thick, planed one side, with butt joints in ceilings height upto 3 storeys, in any situation except flooring & skirting complete all as specified.

Ply wood, 12mm thick, 7 no. of ply, grade BWR, type BB, fixed with screws to timber frame work complete all as specified.

1.5mm thick PVC tiles/sheets laminated plain coloured, marbled mosaic or mottled finish ,laid with approved rubber based adhesive in floors including removal of old PVC tile/sheets flooring complete all as specified.

Dismantling wall and ceiling boards or insulation boards any thickness, any description including cover fillets complete all as specified.

Hot dipped galvanised iron imposed grid with 24 mm wide T-section (White powder coated). The framework shall comprise of main runner made from 0.33mm thick GS sheet and of size 24 x 32x 300mm and spaced at 1200mm maximum centres securely fixed to structural soffits with hangers of 4mm dia.GI wire to be fixed with approved rawl plugs, adjusters and screws. Flush fitting of 1200 mm long cross Tee (with double stitching) to be interlocked between main runners at 600mm centre to form 1200 x 1600 mm modules. Cross tee longer than 600mm to be supported independently. 600 x 600mm doubles to be formed by fittings 600mm long cross tee centrally between the 1200mm cross tee. Perimeter wall angle shall be of 0.45mm thick GS sheet of size 19 x 19 mm and 300mm long of white colour all as per manufacturer's instructions all as specified and directed.

Acoster PVC Laminated Gypsum ceiling tile of size 595 x595 x8 mm ,square edge of white colour comes with best Aluminium foil backing of good thermal insulation ,fire resistance,moisture resistance,environmental friendly,easy installation and easy to clean etc complete all as specified.

Demolition of textile coverings including frames (if any) cover fillets in ceiling / wall complete all as specified.

Solid PVC ceiling / wall lining consisting of 5mm thick single side prelam PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing, complete all as specified and directed.

5mm thick PVC sheet fillet of width 35 mm for wall panelling inclusive of fixing on to wall to make PVC frame as per specification and drawing complete all as specified.

Taking down eaves gutters and rain water pipe (any size or pattern) including all fitting, heads, shoes, bends, swan necks,etc including cleaning or refixing or removal to store etc complete all as specified.

110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for, complete all as specified.

Excavation in trenches, n exc 1.5 mtr wide and n exc 1.5 mtr in depth for foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. n exc 10 Sqm on plan and n exc 1.5 mtr in depth and getting out in hard/dense soil,complete all as specified.

Returning filling in including spreading levelling watering and well ramming in layers not exc 25 cm.,complete all as specified.

Removing excavated material exc 50 mtr and n exc 250 mtr depositing where directed at a level n exc 1.5 mtr above the starting point,complete all as specified.

PCC 1:4:8 type D-2 ( using 40 mm graded stone aggregate) Cement concrete in foundations,filling and mass concrete, complete all as specified.

Form work to sides of concrete foundations, footings, bases of columns, sides & soffits of foundation and plinth beams and similar work for rough finished flat surfaces of concrete complete all as specified.

Form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick, for rough finished flat surfaces of concrete complete all as specified.

Form work to edges of concrete flats, openings, floors & roofs and sides of RCC/PCC bands in walls and similar work exceeding 5cm but not exceeding 10cm wide for rough finished surfaces of concrete complete all as specified.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) complete all as specified.

RCC (1:2:4) type B-1 using 20mm graded stone aggregate in slabs supported on walls, beams & columns in floor roof, landing , complete all as specified (reinforcement to be measured separately).

Reinforced cement conrete Type B1 1:2:4 (20mm graded aggregate) in foundation, including raft, footing, foundation beams, plinth beams bases for columns etc. complete all as specified.

Mild steel TMT bars 8mm dia and over as reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified.

Mild steel TMT bars 10mm dia and over as reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified.

Mild steel TMT bars 5 to 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified.

18-20 mm thick granite (of any type ) work (table rubbed and polished ) in cooking platform and like in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite complete all as specified.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations all as specified and directed.

Mild steel bolts, dia of neck exc 20 mm and not exc 25 mm purpose made, with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut, exc 30cm long complete all as specified and directed.

Mild steel conforming to Fe 410 -W (GdeE- 250) quality B as in Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment complete all as specified and directed.

Taking down plastering of any description and in any position in cement mortar on brick or stone walls etc including raking out joints ,hacking for key,scrubbing down with water etc complete all as specified and directed.

Rendering 20mm thick in two layers on fair faces of stone masonry surfaces or surface other than fair face of brickwork or on one side of lathing in CM 1:4 surface finished fair & even complete mixed with and including water proofing compound @ 3% by weight of cement or as per manufacturer's instruction, height upto three storeys of bldg complete all as specified and directed.

Preparation of newly plastered surfaces of external walls and applying two coats of weather proof paint on external surfaces including a coat of alkali resistant priming paint, height upto three storeys of building / tower complete all as specified and as directed.

Complete removal of existing treatment incl preparation of surfaces of walls and applying two coats of weather proof paint on external surfaces including a coat of alkali resistant priming paint , height upto three storeys of bldg / tower complete all as specified and as directed.

Rendering 20mm thick in two layers in CM 1:6 on fair faces of stone masonry surfaces or surface other than fair face of brickwork or on one side of lathing, surface finished fair & even without using extra cement complete all as specified and directed.

Preparing newly plastered surfaces and applying two coats of oil emulsion distemper over one coat of primer over a layer of 3mm thick white cement based wall care putty complete all as specified and directed. Note: Colour and shade will be approved by GE.

Preparing old plastered surfaces and applying two coats of oil emulsion distemper over one coat of primer over a layer of 3mm thick wall care putty including complete removal of existing treatment on wall (any number of layers) by scrapping with steel scrappers or any other means, including filling depressions of scrapped with white cement based wall care putty (3mm thick) and preparation of surfaces for futher treatmant complete all as specified and as directed .

Dismantling of cast iron or reinforced concrete drain pipe of any dia, jointed in cement mortar and taking out of trenches/floor/wall if required as specified and directed.

Cast iron soil waste & vent pipes (sand cast pipes) in any length 100 mm dia, with or without ears with cement joints laid in trenches or in floors as specified and directed.

100mm bore dia Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified.

100 mm dia Cast iron soil waste & vent pipes (sand cast pipes) in any length with or without ears with cement joints on wall as specified and directed.

Branch pieces, single (equal or unequal),ordinary or inverted (spigot or socket type) or with parallel branches, 100 mm bore with oval accessed door all as specified & directed.

Bends (any radius) diminishing pieces or tapers ( large bore measured) ,100 mm dia as specified and directed.

75 mm dia Cast iron soil waste & vent pipes (sand cast pipes) in any length with or without ears with cement joints laid in trenches or in floors as specified and directed.

75 mm dia Cast iron soil waste & vent pipes (sand cast pipes) in any length with or without ears with cement joints on wall as specified and directed.

Branch pieces, single (equal or unequal),ordinary or inverted (spigot or socket type) or with parallel branches, 75 mm bore ,with oval accessed door complete all as specified and directed.

Bends (any radius) diminishing pieces or tapers ( large bore measured) ,75 mm dia complete all as specified and directed.

Cast Iron cowl 75mm dia complete all as specified and directed.

50 mm dia Cast iron soil waste & vent pipes (sand cast pipes) in any length with or without ears with cement joints on wall complete all as specified and directed.

Cast Iron cowl 50mm dia complete all as specified and directed.

Stack clamp out of 50mm by 5mm flat iron and 16mm dia round iron stays,including bolts and nuts and securing ends of stays to wall or roof , 100mm bore of pipe, fixed in repair complete all as specified and directed.

Taking down Chowkhats or frames with shutter (without taking off shutters from the frames) not exc 1.5 sq. m each and removing to store complete all as specified.

Taking down Chowkhats or frames exc. 1.5 sq. m but n.exc 4 sqm each with shutter (without taking off shutters from the frames) and removing to store complete all as specified.

Taking down Shutters of any description n exc 1 sq. m each including removing to store complete all as specified.

Taking down Shutters of any description exc 1 sq. m but n.exc 2 sqm each including removing to store complete all as specified.

Taking down Shutters of any description but exc 2 sqm each including removing to store complete all as specified.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frame or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified.

Sheet glass 3 mm thick ordinary quality and glazing with oil putty or wooden bead built in squares not exceeding 0.5 sq.m in each pane, fixed in repair, complete all as specified.

Sheet glass 4 mm thick ordinary quality and glazing with oil putty or wooden bead built in squares exceeding 0.5 sq.m in each pane, fixed in repair, complete all as specified.

Sheet glass 5.5 mm thick ordinary quality and glazing with oil putty or wooden bead built in squares exceeding 0.5 sq.m in each pane, fixed in repair, complete all as specified

Galvanised mild steel wire cloth 0.50 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staple fixed in repair complete all as specified

Second class hardwood plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified.

Ditto, but semi-circular, worked from the solid in two or more sectors, dowelled and keyed with double-headed hardwood keys complete all as specified.

30 mm thick 2nd class hard wood glazed and skeleton shutter for window, ventilator, etc. open rebated and prepared to receive glass gauze etc (divided into panels with sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc size of numbers of shutter as specified in SSR Pt I Section 8, clause 8.2 (b) supplied and fitted to chowkat etc complete all as specified.

35 mm thick 2nd class hardwood Glazed and skeleton shutters, open rebated and prepared to receive glass,gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified.

Second class hardwood 35mm thick factory made plain, framed, panelled shutter (two panels) with lock rail and panel of 9mm thick B.W.P commercial ply or 12mm thick veneered particle board with commercial veneering on both faces; size of rail and stile as per IS: 1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified.

Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded wood grain PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and wood grain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of wood grain printed PVC sheet used instead of Plain colour PVC sheet & 5mm thick x15mm wide PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing.

Solid PVC Door Frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet instead of plain colour PVC sheet & edges will be painted to match with printed sheets, reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing

20 mm dia mild steel coloured PVC coated fancy curtain rod complete all as specified and directed.

Mild steel coloured brackets including PVC designer dome for curtain rod complete all as specified and directed.

Butt hinges 100 mm size medium weight cold rolled mild steel fixed complete all as specified and directed.

Butt hinges 75 mm size medium weight cold rolled mild steel fixed complete all as specified and directed.

Aluminium handles, cast type, anodised 150 mm size complete all as specified.

Aluminium handles, cast type, anodised 150 mm size fixed in repair complete all as specified.

Aluminium handles, cast type, anodised 125 mm size complete all as specified.

Aluminium handles, cast type, anodised 125 mm size fixed in repair complete all as specified.

200 mm long aluminium anodised barrel tower bolt of extruded section and fixed, complete all as specified.

200 mm long aluminium anodised barrel tower bolt of extruded section and fixed in repair complete all as specified.

150 mm long aluminium anodised barrel tower bolt of extruded section and fixed, complete all as specified.

150 mm long aluminium anodised barrel tower bolt of extruded section and fixed in repair, complete all as specified.

250 mm long aluminium anodized sliding door bolts, ISI marked, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified.

250 mm long aluminium anodized sliding door bolts, ISI marked, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed in repair complete all as specified.

300 mm long Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified.

300 mm long Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed in repair complete all as specified.

Brass handles 150mm size, cast type, polished bright complete all as specified.

Brass handles 150mm size, cast type, polished bright fixed in repair complete all as specified.

Mild steel 300mm ordinary rat rail pattern springs including roller and roller plate fixed in repairs complete all as specified.

Hasp & staple 125mm size made up of brass, safety type, with mild steel hinges pin including bolt of hinge plate & fixed with screw complete fixed in repair all as spd & directed.

Removing old paint by paint removers or burning off by blow lamps and cleaning with scrapers, any number of coats, any width or girth complete all as spd & directed..

Preparing new or previously untreated surfaces of wood and wood based materials of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Preparing old painted surfaces of wood and wood based materials of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint all as specified and directed.

Demolition of cement concrete in ground floor & paving n.exc 15 cm thickness ( below or above ground level) complete all as specified and directed.

25 mm thick plain cement concrete 1:2:4 type B1 using 20 mm crushed graded stone agg as in floor finished surfaces even and smooth without using extra cement complete all as specified.

Machine cut Kota stone slab flooring 18-20mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing including 20mm thick screed bed with cement mortar 1:4 complete all as specified.

Machine cut Kota stone slab flooring 18-20mm thick in skirting/dados and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing including 10mm thick rendering in cement mortar 1:4 complete all as specified

Vitrified Ceramic tiles Light shade 10mm thick (square/rectangle) Polished area of each tile exceeding 0.36 sqm but not exceeding 0.42 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tile including with 15mm thick screed bed in cement mortar 1:4 complete all as specified

Vitrified Ceramic tiles Light shade 10mm thick( square/rectangle) Polished area of each tile exceeding 0.36sqm but not exceeding 0.42 sqm on vertical surfaces such as skirting / dado and risers to steps set and jointed in neat cement slurry and pointed in coloured cement to match tiles over and including 10 mm thick backing coat in CM (1:4) complete all as specified .

Dismantling of floor hearth or wall tiling incl cement mortar bedding and removing the rubbish off the premises,complete all as specified.

Non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed with cement mortar 1:4 all as specified

Glazed ceramic coloured tiles 350x250x7mm/ 450 mm x 300 mm x 6 to 7 mm thick,as in skirting, dados, risers to steps, etc set and jointed in neat cement slurry and pointed in coloured cement to match tiles over and including 10 mm thick rendering in CM (1:3) complete all as specified.

Rubber moulded Pre polished lacquer finish chequered cement concrete tiles 300 x 300 x 25mm thick, with grey cement and pigment set, jointed and pointed in neat cement slurry in floors over Screed bed or bedding layer of mortar 20 mm thick for laying floor finishes complete all as specified and directed.

Sink with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste coupling/ waste pipe; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm, bowl size 410mm x 330mm x 160mm complete all as specified and directed.

Vitreous china european dual type one piece type water closet with flushing cistern of size 780x375x700 mm star white over and including fittings such as 'S' or 'P' trap distance pieces 100 mm long etc with complete fitting required for installing/fixing Make : Hindware cat part No 92071 or equivalent make mentioned in Appx B

Chromium plated corner glass shelf with bracket and 6.3 mm sheet glass including circular cutting, grinding polishing & rounding edges of glass etc. Fixed in repair complete all as specified.

PVC corner shelf on wall in set of three Nos, fixed in repair complete all as specified.

CP brass jet spray (health faucet) with flexible pipe 1.50m long fixed to EWC suitable for 15mm bore of pipe fixed in repair complete all as specified.

Towel ring of CP brass fixed with and including chromium plated brass screw and wooden/plastic cleats (min weight 190 gms) fixed in repair complete all as specified.

PVC bath cabinet with mirror 350x450mm, fixed in repair complete all as specified. Make : Prayag Cat No 551 or equivalent mentioned in Appx B

15 mm bib taps cast copper alloy chromium plated fancy type, screwed for iron pipe or brass ferrule, fixed in repair complete all as specified

Towel rail 600 mm long of CP brass fixed with and including chromium plated brass screw and wooden/plastic cleats fixed in repair complete all as specified

Vitreous China wash hand basin flat back of size 550x400 mm pedestal pattern including brackets,cutting for and piping in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe etc complete all as specified.

32mm bore dia waste coupling of PVC (half or full threaded) (Minimum weight 32mm-45gms/40mm-60 gms) including waste pipe of polyethylene of low or high density or PVC, 32 mm dia, for wash hand basin fixed in repair complete all as specified.

15 mm dia Angle/stop cock cast copper alloy, fancy type chromium plated screwed down high pressure, fixed in repair complete all as specified.

PVC connection 15 mm dia and 45cm long with 2 Nos brass nuts at both ends fixed in repair complete all as specified.

15 mm pillar taps fancy type cast copper alloy with capstan heads, chromium plated, screed down high pressure, with or without lettered 'Hot; or 'Cold' with long screwed shanks and fly nut, screwed for iron pipe and fixed in repair complete all as specified.

Sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing , 60 cm long complete all as specified.

Taking up or down steel tubing and connections 15 mm bore complete all as specified and directed.

Fixing only old steel tubing and connections 15 mm bore, in new or old position (walls, ceiling, floors, etc) complete all as specified and directed (GI pipe obtained from taking down 20 mm bore pipe shall be used).

Galvanised mild Steel water tubes,15 mm bore with all fittings, 'medium grade', ISI marked, galvanised, fixed to walls and ceiling or laid in floors complete all as specified and directed.

Taking up or down steel tubing and connections 20 mm bore complete all as specified and directed.

Fixing only old steel tubing and connections 20 mm bore, in new or old position (walls, ceiling, floors, etc) complete all as specified and directed (GI pipe obtained from taking down 20 mm bore pipe shall be used)

Galvanised mild Steel water tubes, 20 mm bore with all fittings, 'medium grade', ISI marked, galvanised, fixed to walls and ceiling or laid in floors complete all as specified and directed.

Taking down carefully aluminium point wiring (light, Socket or power) complete including fittings and fixtures such as switches, ceiling roses pendents, regulators, sockets etc for re use to be measured separately including making good the disturbed portion/surface complete all as specified and directed.

Point wiring with multistranded copper conductor cable, PVC insulated and unsheathed (FRLS) size 1.5 sqmm drawn in and incl PVC casing and caping with fixing accessories for one light /fan point controlled by one switch with pressed steel concealed terminal boxes covered with 3 mm thick laminated sheet incl continuous earth wire of PVC insulated unsheathed multi stranded copper conductor cable size 1.5 Sqmm for earth wire connected to common earth dolly all as specified and directed .

All as per item No 147 above but for one 3/5 pin socket 5 Amp on same board, with 1.5sqmm wire and 1.5sqmm earth wire all as specified and directed.

All as per item No 147 above but for one 3/5 pin socket 5 Amp on independent board with 1.5 sqmm wire and 1.5sqmm earth wire all as specified and directed .

All as per item No 147 above but for 3 pins socket outlet 15 Amps independent with 4 sq mm incl continuous earthing with multistandred copper conductor PVC insulated unsheathed size 4 Sq mm complete all as specified and directed.

Switch piano flush type/Bell push, 5 Amps, single pole one way complete all as specified and directed.

Socket 3/ 5 pins, 6 Amp, flush type piano (multi purpose) complete all as specified and directed.

Socket 15 Amps flush type,3/ 5 Pin, 230 Volts , AC complete all as specified and directed.

Switch 15 Amps flush type 230 Volts , AC complete all as specified and directed.

Point wiring with multistranded copper conductor cable, PVC insulated and unsheathed (FRLS) size 1.5 sqmm drawn in and incl PVC casing and caping with fixing accessories for one light /fan point controlled by one switch with pressed steel concealed terminal boxes covered Modular plate incl continuous earth wire of PVC insulated unsheathed multi stranded copper conductor cable size 1.5 Sqmm for earth wire connected to common earth dolly all as specified and directed.

All as per item No 155 above but for one 3/5 pin socket 5 Amp on same board, with 1.5 sqmm wire and 1.5 sqmm earth wire all as specified and directed.

All as per item No 155 above but for one 3/5 pin socket 5 Amp on independent board with 1.5 sqmm wire and 1.5 sqmm earth wire all as specified and directed.

All as per item No 155 above but for 3/5 pins socket outlet 15 Amps independent with 4 sq mm incl continuous earthing with multistandred copper conductor PVC insulated unsheathed size 4 Sq mm complete all as specified and directed.

Modular switch flush type, 5/6 Amps, single pole one module white colour complete all as specified .

Modular switch flush type, 15/16 Amps, single pole one module white colour complete all as specified.

Modular socket 3/5 pins combined, 5/6 Amp, flush type (multi purpose) two module complete all as specified.

Modular socket 3/5 pins combined 16 Amp, flush type(multi purpose) two module complete all as specified.

Ding Dong door bell complete all as specified and directed.

Ceiling rose, surface bakelite, 65x50mm, three terminals complete all as specified and directed.

Batten holder PVC/Polycarbonate base / back suitable for LED lamp complete all as specified and directed.

LED Bulbs 9/10W B-22 Pin type complete all as specified and directed.

Skylite Recess / Surface mounting,36W, LED 2'x2' luminaire integrated electronic driver, optics diffused,including taking down the unserviceable one complete all as directed

Skylite Recess/ Surface mounting 18 W LED 1'x1' luminaire integrated electronic driver, optics diffused,including taking down the unserviceable one complete all as directed .

Skylite Recess / Surface mounting 36W LED 4'x1' luminaire integrated electronic driver, optics diffused, including taking down the unserviceable one complete all as directed .

LED tube light along with fixture, 20W(4 feet) wall mounted LED batten, extruded PVC, heat sink provided for efficient heat dissipation & integrated electronic driver, optics diffused, including taking down the unserviceable one complete all as specified & directed.

LED 6000K (2’ feet), 10W Decorative LED lighting fixture with extruded PVC, heat sink, environmental friendly, energy efficient ready to use pack, complete and including taking down existing fittings all as directed.

LED building secuity light 25 watt complete and including taking down existing fittings all as specified & directed .

Submain wiring with 2X6.0 sqmm +1X4.0 sqmm Earth Wire single core PVC insulated FRLS sheathed copper cable connecting to common earth dolly in and including heavy duty PVC casing caping and dismantling and taking down existing unserviceable wiring, all accessories complete all as specified and directed.

VTPN 4 way double door prewired distribution board TPN-DPX 125 MCCB including one No MCCB 125 Amps, 25 kA, 4 pole as incomer and suitable SPN/TP MCBs as outgoing double door type sheet metal enclosure 415V with 200 Amps rated standard busbar of suitable size plate and common neutral link without MCBs with blank plate suitable for 4 way complete and including taking down unserviceable VTPN DB's all as specified and all as directed Note : Rates of MCCB and MCB SPN/SP/TP shall be deemed to be included in the quoted rates.

Single pole and neutral sheet metal enclosures for Distribution board (DB's) suitable for MCBs fitted with bus bar ,Neutral link, Earth Bar and Din rail 240 V, 50 Hz supply double door SP&N DB system 12 ways fixed in repairs complete all as specified.

All as per item No 175 above but 8 ways complete all as specified.

RCCBs for earth leakage protection 2 pole ,40 Amp rating, 30mA capacity suitable for 240 Volts and including taking down existing MCB/ RCCB complete all as specified.

MCB SPN 06 to 40 Amps 240V incl all termnials, fitting etc. including taking down old unserviceable one complete all as specified and directed.

MCB SP 06 to 40 Amps 240V incl all termnials, fitting etc including taking down unserviceable one complete all as specified and directed.

Earthing complete with galvanised steel earth plate electrode 600 x 600 x 6.3 mm thick buried directly in ground (earth pit not less than 2.25 Mtr normal ground level),and top edge of earth plate not less than 1.5 mtr below normal ground level, connected to galvanised means of earth wire 4 mm dia with bolts, nuts & check nuts, and washers of galvanised iron protection pipe light grade of 15 mm dia and watering pipe medium grade of 20 mm dia and filled with alternate layer of charcoal and common salt, watering funnel with wire mesh, earth pit chamber and cover CI frame PCC 1:3:6 type C-2 all as shown in electrical plate No-3 of SSR part-I of 2009 connected to earthing test point all as specified and indicated including all earth work excavation, returning filling and disposal of surplus soil and testing on completion.

PRITPAL SINGH

M/S JOHN VASSELLY

Ajinkya Constructions

M/S Meera Builders

M/S kuldeep kumar khullar