Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹24.7 LAccepted-AOC | L1 | Accepted-AOC Tender AoC | |
| 2 | L2₹26.7 L+₹1.5 L (5.83%)Rejected-Finance H NO 12 ADRASH SAINIK ENCLAVE HISAR CANTT HARYANA | HISAR | HISAR | HARYANA | 125006 | L2 | Rejected-Finance Being L2 | |
| 3 | L3₹29.4 L+₹4.1 L (16.4%)Rejected-Finance | L3 | Rejected-Finance Being L3 | |
| 4 | L4₹33.5 L+₹8.3 L (32.9%)Rejected-Finance | L4 | Rejected-Finance Being L4 |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
7 Feb 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE(W) HISAR
GE(W) HISAR HISAR MIL STN HISAR 125006
GE(W)/HSR-63/2022-23 REPAIR TO PLASTERING AND BRICKWORK AT BHOJRAJ ZONE A AT HISAR MIL STN UNDER GE (W) HISAR
2022_MES_569443_2
GE(W)/HSR-63/2022-23
Open Tender
Civil Works
Item Rate
330 days
GE(W) HISAR
As per tender documents
8 documents required · 8 mandatory
₹500
GE(W) HISAR
₹60,000
Yes
30 Mar 2023
17 Jan 2023
9 Feb 2023
17 Jan 2023
7 Feb 2023
24 Jan 2023
Amount
Dismantling brick tiles or terracing tiles single layers as on roof complete all as specified and directed.
Demolition of mud of any thickness including plastering and leeping whether full thickness removed or only a part there of complete all as specified and directed.
M&L for cement concrete 1:2:4 type B1 using 20mm graded crushed stone aggregate in padding, levelling courses and the like finish even & fair average 50mm thick or as required at site including Removal of old waterproofing treatment any type and preparation of RCC roof surfaces (old or new) with wire brush drying and cleaning to remove all foreign materials and washing with water to remove loose particles. Filling the cracks by crack filler complete all as specified and directed.
Screed bed or bedding layer or mortar 15mm thick in cement mortar 1:6 with WPC on roof surfaces complete all as specified and directed.
Applying evenly a tack coat of industrial bitumen 85/25 @ 1.20 Kg/Sqm after preparation the surface complete all as specified and directed.
M&L applied a coat of bituminious primer confirming to [email protected] Kg per Sqm ,APP BASED POLYMERIC Memberane not less than 3 mm thick. Weighing not less than 3 Kg/m2, reinforcd with polyster non woven febric(weighing not less than 15 Gm/Sqm) and upperside of memberane thermally insulated with white mineral gravel finish, uniformly embedded during manufacturing process shall be laid dry torch application, side coverlaps shall be 75 mm and end slab shall be 100 mm and all over laps and joints shall also be sealed by torch application including one coat of bituminous aluminium paint complete all as specified and directed.
Providing cement concrete 1:3:6 type C1 using 20mm graded stone aggregate as in roof kerbs etc complete all as specified and directed.
Demolition of brick work built in cement mortar including all quoins, arches pillars etc complete all as specified and directed.
M&L for brick work with fly ash Bricks, (modular brick) straight or curved on plan exceeding 6 mtr mean radius built in CM 1:6 complete all as specified and directed.
M&L for Brickwork with fly ash bricks, (modular brick) straight or curved on plan to any radius in half brick thick walls, built in old size bricks in cement mortar 1:4 complete all as specified and directed.
M&L for Bricks, sub class B,laid on edge in floors old size bricks bedded and jointed in cement mortar 1:6 and pointed in CM 1:3 complete all as specified and directed.
M&L for PCC 1:2:4 type B1 (20 mm graded aggregate) as in coping etc complete all as specified and directed.
Taking down cement plaster including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.
M&L for 15mm thick rendering in cement mortar 1:4 as on brick/concrete walls finished the surface even and smooth w/o using extra cement complete all as specified and directed.
M&L for 10 mm thick rendering in cement mortar 1:6 as on brick / concrete walls complete all as specified and directed.
Supply only Liquid water proofing compound complete all as specified and directed.
M&L for 10 mm thick rendering in cement 1:3 on fair faces of concrete surface with finished surface even and smooth in ceiling , chajjas etc. complete all as specified and directed.
M&L Rough cast plaster as specified .(Rendering coat not less than 10mm thick in C:M 1:3 , while it is still in plastic state the rough cast mixture consisting of crushed stone or fine gravel agg size 6 to 12mm mixed with coarse sand and cement in the ratio of 1:1:1 shall be applied and finished even) on external wall complete all as specified and directed.
M&L for preparation of new plastered surfaces applying two coats of oil bound distemper over one coat of primer complete all as specified and directed.
Preparation of new plastered surfaces applying three coat of white wash on ceiling complete all as specified and directed.
M&L for two coat of cement base paint over newly plastered surface including preperation of newly untreated surface complete all as specified and directed.
Taking down chowkats or frames with shutters wooden & steel w/o taking off suhutter from the frame area n exc 1.50 Sqm each ( Wooden shutters & MS angle frame ) complete all as specified and directed.
Taking down frame sutters exc 1.5 sqm but not exc 4.00 sqm each (without taking off shutters from the frames) complete all as specified and directed.
Taking down shutters of any description exc 1 Sqm & nexc 2 Sqm each. complete all as specified and directed.
S & F for pressed steel frames of size 125 X 60 mm with one or more rebates including necessary fixing lugs, butt hinges, locks strike plate etc(thickness of sheet shall be 1.25mm) and making good the plaster of wall in CM 1:6 complete all as specified and directed.
S & F for pressed steel frames of size 105 X 60 mm with one or more rebates including necessary fixing lugs, butt hinges, locks strike plate etc(thickness of sheet shall be 1.25mm) and making good the plaster of wall in CM 1:6 complete all as specified and directed.
Cuting hole in brick wall in cement mortar for inserting hold fast and making good dismantled portion in CM 1:3 or cement concrete 1:2:4 type B1 as required exc half brick but n.exc one brick complete all as specified and directed.
All as per item No 27.00 but n.exc half brick wall complete all as specified and directed.
S & F holdfasts confirming to Fe 410-S or Fe 310-S complete all as specified and directed.
M&L for PCC 1:3:6 type C-1 (using 20mm Graded Stone Aggregate) as in filling of Chowkhats. complete all as specified and directed.
Factory made Steel windows/ventilators (Box type), with side hung shutters including projecting type hinges with steel handle and steel peg stay complete without glazing bars dovetailed or welded including one shop coat of Zinc chrome primer including making good disturbed surfaces of walls, complete all as specified and directed. Notes:- (i) The rate quoted by the contractor are deemed to be included for one shop coat of red oxide zinc chrome primer on steel windows. Nothing shall extra paid on this account. (ii) Detail of box window shall be given on drawing no TD/2013/01 Sheet 1/3,2/3,3/3 (iii) Glass pane/ wire gauze shall be measured and paid separately.
Factory made Steel windows/ventilators (Box type), with side hung shutters including projecting type hinges with steel handle and steel peg stay complete without glazing bars dovetailed or welded including one shop coat of Zinc chrome primer including making good disturbed surfaces of walls, complete all as specified and directed. Notes:- (i) The rate quoted by the contractor are deemed to be included for one shop coat of red oxide zinc chrome primer on steel windows. Nothing shall extra paid on this account. (ii) Detail of box window shall be given on drawing no TD/2013/01 Sheet 1/3,2/3,3/3 (iii) Glass pane/ wire gauze shall be measured and paid separately.
M&L 35mm thick factory made plain, framed, paneled door shutters kiln seasoned and chemically pressure treated second class, hardwood (two panels) with lock rail and panel of 9mm thick BWP commercial marine grade ply wood bonded with high quality liquid phenol formal dehyde synthetic resin adhesive confirming to IS-710. The size of rails and style shall be as per IS-1003. The shutter shall be fitted to chowkhats complete all as specified and directed.
S&F 35mm thick factory made second class hardwood glazed and skelton door shutter kiln seasoned and chemically treated, open rebated and prepared to receive glass/ gauge etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc complete. The size of members of shutters shall be as specified in MES SSR Part-I. The shutter shall be fitted to chowkhats as directed complete all as specified and directed.
30mm thick factory made wood grain printed (Prelaminated) PVC solid panel PVC door, shutter conforming to criteria of testing as per IS : 4020, consisting of frame made out of MS tube of 19 gauge thickness & size 19x19mm for stiles and 15 x15mm for top & bottom rails, MS frame shall have a coat of red oxide primer of approved make and shall 'be covered with 5mm thick heat moulded PVC 'C' channel of size 30x50mm forming styles, and 5mm thick, 75mm wide PVC sheets for top rail, lock rail & bottom rail on either side, and 10mm (5mmx2)thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail panelling of 5mm thick PVC sheet to be fitted in the MS frame welded/sealed to the styles & rails with 30mm wide x 5mm thick PVC sheet beading on either side and jointed together with solvent cement adhesive and an additional 5mm thick PVC strip of 20mm width is to be struck on the interior side of 'C' Channel using PVC solvent adhesive complete as per manufacture’s specifications & drawings complete all as specified and directed.
Factory made wood grain printed (Prelaminated) Solid PVC door frame of size 50 x 47 mm , made out of 5mm prelaminated coloured PVC sheet reinforced with MS square tube fixed in opening complete as per manufacturer's specifications and making good the disturbed surfaces with plastering in CM 1:6 (the rate quoted is inclusive this element), nothing extra shall be paid on this account complete all as specified and directed.
M&L Mild steel bars as in window guard bars incl necessary welding and a shop coat of zinc primer , confirming to Fe.290.Gde-E-165 complete all as specified and directed.
M&L preparing new steel surfaces over 10 cm in width or girth of any description and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
M&L preparation of new steel surfaces of any description, over 10 cm in width or girth, and applying two coats of synthetic enamel paint complete all as specified and directed.
M&L for galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed.
M&L for galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples, fixed in repairs complete all as specified and directed.
M&L Butt hinges med weight cold rolled mild steel and fixed in repair 100mm size complete all as specified and directed.
M&L Butt hinges med weight cold rolled mild steel and fixed 100mm size complete all as specified and directed.
M&L 300mm long Aluminium alloy, anodised, sliding door bolt with hasp staple (Bolt type) and fixing clips of sheet, cast or extruded section or cast aluminium alloy and fixed complete all as specified and directed.
M&L Aluminium anodised barrel tower bolt of extruded section 200mm long complete all as specified and directed.
M&L aluminium handles cast type , anodised 150mm size complete all as specified and directed.
S&F in repairs 300mm, ordinary rat tail rod pattern springs including roller and roller plate mild steel complete all as specified and directed.
S&F 300mm, ordinary rat tail rod pattern springs including roller and roller plate mild steel complete all as specified and directed.
M&L floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring fixed in floor 140mm size complete all as specified and directed.
S&F 3mm sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 Sq.m in each pane complete all as specified and directed.
Hacking out old broken glass (any kthickness, size, quality or description) fromwooden/ metal frames, glazed with putty complete all as specified and directed.
S&F 3mm figured glass, ordinary quality and glazing with oil putty in square n exc 0.5 Sq.m in each pane complete all as specified and directed.
M&L for preparation of new wooden surfaces and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
Demolition of cement concrete in ground floors and pavings not exc 15cm thickness (below or above ground level), including removing out of MD Land complete all as specified and directed.
Demolition/dismantling of stone slabs and tiles of any description or thickness in floors, aprons. Laid bedded and pointed in any mortar etc complete all as specified and directed.
M&L Machine cut Kota stone slab flooring 20-25mm thick over and including provision of screed bed 20mm thick in CM 1 :4, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & mirror polishing complete all as specified and directed.
All as per item No 56.00 but on vertical surface set and jointed in neat cement slurry and including backing coat rendering 10 mm thick in CM 1 : 3 complete all as specified and directed.
Dismantling floor, heath or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
M&L for vitrified ceramic tiles 10mm thick light shade (square/rectangle) polished , area of each tiles n.exe 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick cement screed 1:4 complete all as specified and directed.
M&L Non -skid ceramic tiles 7 to 8 mm thick light shade (Square / rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors over and including provision of cement screed bedding layer 10 mm thick in CM 1 : 4 etc set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed.
M&L glazed coloured ceramic tiles in vertical surfaces 350x250x7mm/450x350x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match in 10mm thick screed in CM 1:3 all as complete all as specified and directed.
M&L PCC 25mm thick type B0, 1 : 2 : 4 (12.5mm graded aggregate) in sub flooring complete all as specified and directed.
M&L PCC 1 : 3 : 6 type C2, 75mm thick ( by using 40mm graded stone aggregate) for plinth pretection finishing even and smooth without using extra cement complete all as specified and directed.
Forming construction Joint 30mm deep x 10mm wide filled with sealing compound grade 'A' complete all as specified and directed.
M&L for preparation of old plastered surfaces and applying one coat of white wash on walls complete all as specified and directed.
M & L for preparation of old plastered surfaces and applying one coats of cement base paint on walls including complete removal of existing treatment complete all as specified and directed.
M & L for preparation of old plastered surfaces and applying one coat of white wash on old ceiling surface complete all as specified and directed.
M&L 100mm thick cement concrete type B-2 , 1:2:4 ( 40mm graded stone aggregate ) with finished the surface even and smooth W/o using extera cement and making 12 mm wide 10 mm deep grove while surface is green as pattern given complete all as specified and directed.
M & L for coloured chequered cement concrete tiles with grey cement and pigments 300 mm x 300mm x 25mm thick and including provision of cement screed bedding layer 10 mm thick in CM 1 : 4 etc set with neat grey cement slurry ,jointed and pointed in cement slurry and pigments in floor/ paths , complete all as specified and directed.
M&L Cement concrete type D 2, 1:4:8 (using 40 mm graded granite stone aggregate) in sub base of flooring/ hard standing and complete all as specified and directed.
M&L for spreading of 25mm thick layer of sand cushioning complete all as specified and directed.
Supply and fixed 60 mm thick machine pressed precast interlocking paver block of any size and shape confirming to IS 15658-2006 of Grade M-35 placed over sand cushioning made up with 12.5mm graded mechanicaly crushed stone aggregate, factory made of any tint, over and including filling the joints with coarse sand complete all as specified and directed. Note:- Sand cushioning shall be measured and paid separately .
Dismantling asbestos cement (corrugated,/semicorrugated sheeting any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.
M&L for prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in roof covering, fixed with self tapping screws or L'or 'J' type look , complete all as specified and directed.
M&L for prepainted galvalume aluminium zinc coating GI based plain sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in ridges, valleys hips etc fixed with self tapping screws or L'or 'J' type look complete all as specified and directed.
Dismantling mild steel work as in wind Tie , grill grabbing etc complete all as specified and directed.
S & F Mild Steel work in tubular trusses and tubular posts/ purlins including special shaped washers etc., complete using ERW or induction butt welded tubes conforming to IS :1161-1979 grade st-240 including notching, drilling, fitting, riveting and/or welding or connecting with bed plate, bolt and nuts complete all as specified and directed.
virendra constructions
P.K. ENTERPRISES
M/S Punia Constructions
stage.html
html • 0.05 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .