PROVISION OF COVERED PARKING SHED FOR 04 X AMBULANCE VEHICLE ALONGWITH HARDSTANDING IN FRONT OF MT GARAGE OF MH BELGAUM UNDER GE BELGAUM.

Amount

Surface excavation not exc 30 cm deep and averaging 15 cm deep and getting out in hard/dense soil complete all as specified and as directed.

Excavation in trenches n. exc. 1.5 m wide and n. exc. 1.5 m in depth for foundation and getting out in Hard/dense soil complete all as specified and as directed.

Returning filling in excavated soil including spreading, leveling Watering and well ramming in layers n.exc 25cm complete all as specified and as directed.

Removing excavated soil n.exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting point completeall as specified and as directed .

Material and labour for Plain cement concrete type D2, 1:4:8 (using 40mm graded stone aggregate) in foundation and mass concrete complete all as specified and as directed

Material and labour for Moorum/red bajri filling in floors or paving, laid in layers n exc 15cm thick, spread levelled and rammed including watering and consolidation complete all as specified and as directed.

Material and labour for hard core with broken stone or boulders of gauge not exc 63 mm deposited spread and levelled in layers not exc 15 cm thick and well rammed to a true surfaces complete all as specified and as directed.

Material and labour for Anti termite tretment with treating the bottom and Sides of excavation @ 5 Ltrs of emulsion per sqm of surface area complete all as specified and as directed.

Material and labour for Anti termite tretment with treating the soil under plinth protection @ 5 Ltrs of emulsion per sqm of surface area complete all as specified and as directed.

Material and labour for Use and waste of steel form work for flat rough finished surfaces to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and as directed.

Material and labour for Use and waste of steel form work for rough finished surface to side andsoffit of roof beams, tie beams, lintels, and similar works complete all as specified and as directed.

Material and labour for Use and waste of steel form work for rough finished surface of columns pillars,posts,struts,piers, and stanchions concrete square,rectangular or polygonal etccomplete all as specified and as directed.

Material and labour for Use and waste of steel form work for rough finished surface to soffit of suspended slabs such as roof slabs, floor slabs, landing and similar work n.exc 200mm thick (horizontal or sloping) complete all as specified and as directed.

Material and labour for Use and waste of steel form work to edges of concrete flats, n.exc 20 cm wide horizontal or slooping and similar works. complete all as specified and as directed.

Material and labour for RCC M-25 ,Design mix ( using 20mm graded stone aggregate) as in foundations, including footings, foundation beams, plinth beams, bases for columns, etc; basement slabs, and mass concrete or similar items complete all as specified and as directed.

Material and labour for RCC M-25 ,Design mix ( using 20mm graded stone aggregate) as in Columns,Pillars,piers ,posts and struts or similar items complete all as specified and as directed.

Material and labour for RCC M-25 ,Design mix ( using 20mm graded stone aggregate)as in beams, cantilever and lintels over 1.5 m span etc or similar itemscomplete all as specified and as directed.

Material and labour for RCC M-25 ,Design mix ( using 20mm graded stone aggregate)as inSlabs supported on walls, and the like complete all as specified and as directed.

Supply and fix Mild steel TMT bars of FE 550 D 10mm dia and over, cut to length bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed

Description all as per item No 19 here in before but 5 to 10 mm dia as in stirrups/spacers/binders etc

Material and labour for Precast cement concrete block masonry 1:3:6 type C1 ( using20mm graded aggregate) masonry with solid block exc10cm in width and setting in CM 1:6 etc complete all as specified and as directed.

M&L for rendering 10mm thick in cement mortar 1:4 on fair faces of brick work or PCC block masonry or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 5mm thick in cement mortar 1: 4 mixed with water proofing compound over 10mm thick backing coat in cement mortar 1:6 on fair faces of brick work or PCC block masonry or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed. Note: Water proofing compound shall be measured and paid separately. .

Supply only water proofing compound. Make :Impermo/Cico/Roff

Material and labour for Rendering 5mm thick in cement mortar 1:3 on ceiling surfaces, finished fair and even without using extra cement complete all as specified and as directed.

Material and labour for PCC 1:4:8 type D2, (Using 40 mm graded stone aggregate ) 100 mm thick as in sub base to floor including necessary steel form work complete all as specified and as directed.

Material and labour for 100 mm thick Plain cement concrete, 1:2:4 type B1, using 20 mm graded stone aggregate, as in floors etc including necessary steel form work complete all as specified and as directed.

Material and labour for Preparation of RCC roof slab by removing dust, dirt and applying oil bound bituminous primer at 0.2kg per Sqm over provide APP modified water proofing membrane weight not less than 4kg/Sqm reinforced with non oven polyster mat weight not less than 160gms per Sqm including minimum 10cm side/over lap and including applying a coat of hot blown bitumen grade 85/25 over membrane at 1.2kg per Sqm over on drying apply a coat of solar reflective bituminous aluminium paint at 0.1kg/sqm over rendering 10mm thick on concrete surfaces in CM 1:3 with water proofing compound and finishing the surfaces even and smooth without using extra cement complete all as specified and as directed . Note :water proofing coumpund shall be measuerd separately .

Material and labour for Plain cement concrete type C2 1:3:6 (using 40 mm graded stone aggregate )75 mm thick as in plinth protection and finishing the cement concrete surface even and smooth without using extra cement including necessary form work complete all as specified and as directed.

Supply and fix Steel rolling shutters 1.25 mm thick,gear operated type with bevel gear box and crank handle without ball bearing including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete all as specified and directed.

Material and labour for two coats of 100 % premium acrylic emulsion paint having VOC less than 50 gm/litre and uv resistance as per IS 15489:2004, alkali & fungal resisatance , dirt resistance , exterior paint of required shade (Company depo tinted ) with silicon additive @1.43 Litres /10 sqm over and incl priming coat of exterior primer applied @ 0.90 Litres /10 sqm over new surface complete all as specified and as directed

Material and labour for Preparation of newly plastered surface of wall and applying two coats of oil bound distemper over a coat of alkali resistent primer complete all as specified and as directed.

Material and labour for Preparing newly plastered surfaces of wall and applying three coats of white wash on ceiling surface complete all as specified and as directed.

Material and labour for Preparation of new steel surfaces, exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of zinc chrome red oxide primer complete all as specified and as directed.

Material and labour for Forming 12mm thick Expansion joint filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A’ complete all as specified and as directed.

Material and labour for Point wiring with FRLS PVC insulated unsheathed electric cable confirming to IS:694,1100 V grade AC,single core having multistranded copper conductor of size 1.5 sqmm nominal cross sectional area for phase and neutral in and including PVC Casing capping of suitable size ISI marked with all accessories in wiring system and provision of 1.5 sqmm green coloured FRLS PVC insulated unsheathed electric cable confirming to IS:694,1100 V grade AC,single core having multistranded copper conductorconnected to common earth dolly including provision of suitable size of 2nd class hard wood board with sunmica top cover for mounting switches/sockets etc for one light point controlled by one 1 way switch, complete all as specified and as directed. NOTE: (i) Make of PVC cable :Finolex/Polycab/RR Kabel (ii) Make of PVC casing and capping : Avon Plast/Presto plast /Garware

Description all as per in item No. 35 here in before but wiring with 2.50 Sqmm FRLSH PVC insulated unsheathed cable copper conductor multi stranded (for 15 Amps power socket on independent board) with one run of copper conductorFRLSH PVC insulated multi-stranded cable 2.50 Sqmm for earth continuity conductor and connecting to common earth dolly, complete all as specified and as directed.

Supply and fix Switch piano type 5 Amps flush button 240 volts AC ,single pole , one way, complete all as specified and as directed. Make -Anchor /Legrand/Cona

Supply and fix Switch piano flush type single pole, one way 15 Amps 230 Volts AC circuit complete all as specified and as directed . Make : Anchor/Legrand/Cona

Supply and fix Socket outlet 2 in 1, 3 and 5 Pin 5 Amps, 230 Volts AC circuit complete all as specified and as directed . Make : Anchor/Legrand/Indo Asian

Supply and fix ceiling rose ,surface bakelite, size 65x50mm , 3 terminal suitable for 230 volts AC supply, complete all as specified and as directed.Make : Anchor/Legrand/Indo Asian

Material and labour for Sub main wiring with 2 runs of single core FRLSH PVC insulated unsheathed multi-stranded copper conductor cable of size 4 Sq mm drawn through and including PVC conduit in ivory/green/white colour ,medium grade 20 mm dia with all necessary fittings and provision of one run of single core FRLSH PVC insulated unsheathed multi-stranded copper conductor cable of size 4 Sq mm for earth continuity and connected to common earth dolly fixed in wall/ceiling complete all as specified and as directed. Notes: (i) Two different color wires shall be used for phase and neutral . (ii) Connections of cables with MCBs or bus bars shall be done through appropriate size brass/ copper thimbles . (iii)02 run of 4.0 sqmm and 01 run of 4.0 sqmm including 01 run of PVC conduit will be measured as one length (iv)Make of PVC copper conductor cable:- Finlex/Poly cab/ Havells. (v) Make of PVC conduit :Avon plast/Presto plast /Garware

Supply and fix in repair LED INTEGRATED BATTEN T5 tube light fitting type 1x 18/20 watt indoor decorative aluminium extruded T5 LED Battens-integrated type complete with all accesories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed . Note : Make : Havells cat part no : or equivalent price and specification of M/S Wipro/CG

Supply and fix in repair LED street light fitting 25 Watt 230 V AC outdoor type with high pressure die cast aluminum hou sing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protectioncomplete all as specified and as directed . Note : Make : Havells cat part no : or equivalent price and specification of M/S Wipro/CG

Supply and fixing Factory made epoxy powder coated distribution board double door TPN 4 ways (VTPN MCCB DB) with metal door (IP-43 protection) fabricated from minimum 1.0mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, strandard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with Knockouts and suitable for one FP MCCB 100 Amps as incomer and SP/TP MCBs (or any combination of SP/TP MCBs ) outgoings complete all as specified & directed. Make :Havells/Legrand/Indo Asian

Supply and fix MCCB,4 pole,100 Amps , 16 KA current rating conforming to IEC-609472 & IS-139473 to be fixed in distribution board complete all as specified. Make :Havells/Legrand/Indo Asian

Supply and fix Factory made epoxy powder coated distribution board SPN 12 ways double door with acrylic top cover (IP-43 protection) fabricated from minimum 1.0mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, strandard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plate with knockouts and suitable for one SPN MCB 32/40 Amps as incomer and 10 SP MCBs as outgoings complete all as specified and as directed. Make :Havells/Legrand/Indo Asian

Supply and fix amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SPN 40 to 63 AMP following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified.Make :Havells/Legrand/Indo Asian

Supply and fix amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SP 6 to 32 AMP following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning. complete all as specified. Make :Havells/Legrand/Indo Asian

Material and labour for Electrical earthing complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick, burried directly in ground vertically, (earth pit not less than 2.25 metre deep below normal ground level) with top edge of the earth plate at a depth not less than 1.5 metre below normal ground level, connected to GI wire 4mm dia (7.5 metre long) by means of bolts, nuts, washers made of galvanized iron connected to earthing to body of equipment. GI wire protected by 15mm dia light grade GI pipe (7.5 metre long) and watering arrangements with 20 mm dia GI pipe medium grade and GI funnel all as specified and shown in Electrical Plate No 3 of MES Schedule (SSR) Part I including necessary excavation and earth work in any type of soil, charcoal dust salt, and PCC 1:2:4 type B1 in chamber, RCC 1:2:4 type, B1 cover slab, 40mm thick with 6mm dia mild steel bars at 100mm centre to centre both ways and with 6mm dia MS hook complete, and testing of Earth resistance complete all as specified and as directed.

Supply , lay and test cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 16 sqmm 4.0 core including lugs,thimbles and ferrules etc laid in trenches ,fixed to wall ,floor etc complete all as specified and as directed.Make : Gloster/Poly cab/CCI

Excavation in trenches n. exc. 1.5 m wide and n. exc. 1.5 m in depth for foundation and getting out in any type of soil complete all as specified and as directed.

Material and labour for Double wall corrugated High Density Polymer Ethyl pipe(SDR 17) of ISI marked 63 mm outer dia and 50 mm inner dia including necessary fittings like couplers,bends,end caps etc as in cable protection fixed to poles with necessary suitable MS clamps, bolts, nuts, washers or laid in trenches/ roads crossings etc.complete all as specified and as directed. Make : Ketron/Rex/Duraline

Supply and fix Galvanised iron pipe light grade 40mm dia with all fittings and fixed complete on pole/walls/in road etc for cable protectioncomplete all as specified and as directed. Make : TATA/JINDAL/Prakash surya

SAGAR ENTERPRISES

M/s. RENUKA CONSTRUCTIONS

M/s. N D KALING

M/S MAHADEV M PATIL

M/s. KIRAN M CHOUGULE