VELLORE DISTRICT Construction of Waiting Shed at (Near Burial Ground) in Vallam Panchayat of Kaniyambadi Block SFC (DP) 2025- 2026 Scheme Package no 01

VELLORE DISTRICT Construction of Waiting Shed at (Near Burial Ground) in Vallam Panchayat of Kaniyambadi Block SFC (DP) 2025- 2026 Scheme Package no 01

Earthwork excavation and depositing on bank with initial lead and lift in all clauses of soil including cost of labour etc complete SS20A

P.C.C 1:4:8 mix using 40mm ISS HBG metal including cost and conveyance of all etc.. Complete

Brickwork with cm 1:5 using country bricks including cost and conveyance labour charges etc complete.

Supplying and erecting centering shuttering including necessary supports for plane

Below Ground Level

Above Ground Level

Supplying, fabrication and placing in position mils steel or ribbed for all reinforced cement concrete works as per the design given including cost of steel and binding wire in all floors etc., complete complying with standared specification.

R.C.C. 1:1.5:3 mix using 20mm ISS HBG metal including cost and conveyance etc., complete

Weathring Course with Brick Jelly Concrete with 20mm Brick Jelly with pure slacked lime are RCC roof slab in the pooposion 32:12:5 finish with CM1:4 20 mm thick

Finshed with one course of pressed tiles of size 23x23x2cm with cement mortar 1:3 mix and pointed with the same oiled mortar including cost and conveyance of all materials to site and all labour charges etc complete for 10 Sqm

Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The Surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc., complete complying with standard specifications and as directed by the Departmental Officers. [ The rates are inclusive of hire charges for grinding machine with wheel, cost of sand paper (waterproof abrasive sheet), cost of putty blade, labour charges for grinding the joints and sand papering, two coat of putty, scrapping the putty area to level the surface smooth, etc., complete]. The Putty shoule be got approved by the Executive Engineer before use on work.

Plastering in 1:3, 10mm thick including cost and conveyance of all etc.. Complete

Plastering in 1:5, 12mm thick including cost and conveyance of all etc.. Complete

Paving the floor with best quality Vertified Tiles of size 600 x 600 x 8mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three crushed stone M.Sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Painting two coats using approved quality of oil bound distemper including cost and conveyance of paint and all labour charges etc complete

Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.

Supplying and fabricating and fixing MS grill works to windows and grill gate using necessary MS flst for inner and outer members should be fixed to window frames

Cost of 32mm PVC Pipe 10KSC

Cost of 25mm PVC Pipe 10KSC

Cost of 25mm PVC Bend

Cost of 25mm PVC Tee

Cost of 20mm Screw Down PVC Tap

Provision for 1000 litre HDPE Tank

Provision for Electrificatiom Arrangements (Sub Estimate)

Wiring 2 x 1.5 sq.mm (22/0.30)PVC insulated unsheathed SC.cu.conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch box with in flush with wall covered with hylem sheet of 3 mm thick with painting of suitable colour for concealed PVC light/ fan point (SD No.25)

Supply and fixing of 4' Feet LED 18W Fitting with LED 18W tube (Lower End)complete with conduit pipe suspension from the ceiling with PVC unsheathed FRLS copper leads from terminals to the fitting with tube SD 444

supply and fixing of 1200mm sweep AC ceiling fan complete with stepped electronic regulator with 300mm down rod on the existing clamp SD 106

Letering and Painting Name board

GST Amount for providing service to Government contract works for the above construction works. { GST amount is the Total GST amount for total overall quoted amount above this row in column "BB" for all works in this package}

Please Enable Macros to View BoQ information