Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹7.0 LAccepted-AOC 0 0 0 NEAR DAK BUNGLOW NH 1 A NH 1A UDHAMPUR UDHAMPUR JAMMU KASHMIR 182101 UDYAM JK 22 0002496 01AFRPJ1985K1Z4 R M | UDHAMPUR | JAMMU AND KASHMIR | 182101 | ₹7.0 L Quoted ₹7.1 L | L1 | Accepted-AOC BEING LOWEST BIDDER |
| 2 | L2₹7.5 LRejected-Finance 50 CHAURASIS KUNJ PURANA QUILA LUCKNOW 226001 | LUCKNOW | LUCKNOW | UTTAR PRADESH | 226001 | ₹7.5 L | L2 | Rejected-Finance NOT BEING LOWEST |
| 3 | L3₹7.9 LRejected-Finance | ₹7.9 L | L3 | Rejected-Finance NOT BEING LOWEST |
| 4 | L4₹9.1 LRejected-Finance | ₹9.1 L | L4 | Rejected-Finance NOT BEING LOWEST |
| Sl No | Description | Qty | Unit | HALLIOX ENTERPRISES L2 | M/S CHANDER SHEKHAR L4 | SANDEEP ASSOCIATES L3 | Shivam Enterprises L1 |
|---|---|---|---|---|---|---|---|
| 1.00 | REPAIR TO CHAIR WRITING/CBA (FD-280) :- Dismantling/ Opening of joints of damaged/ broken following member of chair writing/ CBA where required for replacement including removing of cane, and necessary polishing with French polish including cleaning and preparation of the surface to match with existing surface etc. all as directed by Engr-in-charge.
(a) S&F front leg (left or right ) made out with Ist class HW seasoned Teak wood of size and shape as per existing chair or as per Drg all as directed by Engineer-in-Charge. | 24 | Each | 200 ₹4,800 | 65 ₹1,560 | 205 ₹4,920 | 120 ₹2,880 |
| 2.00 | Ditto- all as per item No 1(a) above but rear leg (left or right). | 24 | Each | 50 ₹1,200 | 85 ₹2,040 | 60 ₹1,440 | 150 ₹3,600 |
| 3.00 | Ditto- all as per item No 1(a) above but of front/ rear/side members of seat . | 20 | Each | 80 ₹1,600 | 75 ₹1,500 | 100 ₹2,000 | 60 ₹1,200 |
| 4.00 | Ditto- all as per item 1(a) above but back Stiffener | 30 | Each | 100 ₹3,000 | 55 ₹1,650 | 120 ₹3,600 | 60 ₹1,800 |
| 5.00 | Ditto-- all as per item 1(a) above but bottom stiffener | 30 | Each | 100 ₹3,000 | 45 ₹1,350 | 120 ₹3,600 | 30 ₹900 |
| 6.00 | Ditto-- all as per item 1(a) above but Arms | 20 | Each | 50 ₹1,000 | 65 ₹1,300 | 70 ₹1,400 | 60 ₹1,200 |
| 7.00 | Replacement of rubber shoes with S & F new rubber shoe of superior quality with steel plated screws of suitable size complete all as directed by Engr-in-Charge. | 300 | Each | 5 ₹1,500 | 8 ₹2,400 | 10 ₹3,000 | 3 ₹900 |
| 8.00 | Re-canning of chair writing/CBA with 2mm wide half round plastic cane except the border which shall be 3mm flat super quality cream/ white colour (Make - Shah/ Indian Plastic/MPT Premier) and weaving in accordance to Godrej Pattern as shown on drawing including taking down unserviceable plastic cane all as specified and directed by engr-in-charge. | 75 | Each | 150 ₹11,250 | 250 ₹18,750 | 150 ₹11,250 | 170 ₹12,750 |
| 9.00 | REPAIR TO CHAIR DINING (FD279) :- -do- all as items No1 above but chair dinning
(a) S&F front leg (left or right ) made out with Ist class HW seasoned Teak wood of size and shape as per existing chair or as per Drg all as directed by Engineer-in-Charge. | 40 | Each | 80 ₹3,200 | 65 ₹2,600 | 90 ₹3,600 | 100 ₹4,000 |
| 10.00 | Ditto- all as per item No 09 above but rear leg (left or right) | 40 | Each | 50 ₹2,000 | 85 ₹3,400 | 60 ₹2,400 | 20 ₹800 |
Tender Value
₹8.9 L
EMD Value
₹17,900
Closing Date
20 Jul 2023, 6:00 pmClosed
GE (AF) BKT
GE (AF) BKT, LUCKNOW
REPAIR/MAINT OF WOODEN FURNITURE INCLUDING PAINTING AT AF STN BKT
2023_MES_605163_1
8718/BKT/E8
Open Tender
Civil Works
270 days
GE (AF) BKT
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GE (AF) BKT
₹17,900
Yes
24 Jun 2026
23 Jun 2023
22 Jul 2023
23 Jun 2023
20 Jul 2023
6 Jul 2023
Amount
REPAIR TO CHAIR WRITING/CBA (FD-280) :- Dismantling/ Opening of joints of damaged/ broken following member of chair writing/ CBA where required for replacement including removing of cane, and necessary polishing with French polish including cleaning and preparation of the surface to match with existing surface etc. all as directed by Engr-in-charge. (a) S&F front leg (left or right ) made out with Ist class HW seasoned Teak wood of size and shape as per existing chair or as per Drg all as directed by Engineer-in-Charge.
Ditto- all as per item No 1(a) above but rear leg (left or right).
Ditto- all as per item No 1(a) above but of front/ rear/side members of seat .
Ditto- all as per item 1(a) above but back Stiffener
Ditto-- all as per item 1(a) above but bottom stiffener
Ditto-- all as per item 1(a) above but Arms
Replacement of rubber shoes with S & F new rubber shoe of superior quality with steel plated screws of suitable size complete all as directed by Engr-in-Charge.
Re-canning of chair writing/CBA with 2mm wide half round plastic cane except the border which shall be 3mm flat super quality cream/ white colour (Make - Shah/ Indian Plastic/MPT Premier) and weaving in accordance to Godrej Pattern as shown on drawing including taking down unserviceable plastic cane all as specified and directed by engr-in-charge.
REPAIR TO CHAIR DINING (FD279) :- -do- all as items No1 above but chair dinning (a) S&F front leg (left or right ) made out with Ist class HW seasoned Teak wood of size and shape as per existing chair or as per Drg all as directed by Engineer-in-Charge.
Ditto- all as per item No 09 above but rear leg (left or right)
Ditto all as per itemNo 09 above but Front/Rear/Side members of seat.
Ditto-- all as per item No 09 above but bottom stiffener
Replacement of rubber shoes with S & F new rubber shoe of superior quality with steel plated screws of suitable size complete all as directed by Engr-in-Charge.
Re-canning of chair dining.with 2mm wide half round plastic cane except border which shall be 3mm flat super quality cream/ white colour (Make - Shah/ Indian Plastic/MPT Premier) and weaving in accordance to Godrej Pattern as shown on drawing FD-03(M)Sheet 1/1 including taking down unserviceable plastic cane all as specified and directed by Engr-in-charge.
REPAIR TO CHAIR EASY (DB-2960/4979-FD17/201/229) :- Ditto all as per items No 14 above but chair easy. (a) S&F front leg (left or right ) made out with Ist class HW seasoned Teak wood of size and shape as per existing chair or as per Drg all as directed by Engineer-in-Charge.
Rear leg (left and right)
Replacement of rubber shoes with S & F new rubber shoe of superior quality with steel plated screws of suitable size complete all as directed by Engr-in-Charge.
Ditto- all as per item No 15 above but of front/ rear/side members of seat Frame .
Ditto- all as per item No 15 above but of top/ bottom/side members of Back Frame .
bottom stiffner (front and Back below seat frame)
Re-canning of chair easy with 2mm wide half round plastic cane except border which shall be 3mm flat super quality cream/ white colour (Make - Shah/ Indian Plastic/MPT Premier) and weaving in accordance to Godrej Pattern as shown on drawing FD-03(M)Sheet 1/1 including taking down unserviceable plastic cane all as specified and directed by engr-in-charge.
REPAIR TO TABLE 900 X 600 X 760MM WITH/WITHOUT DRAWER FD-55/224/283/284 :- Dismantling of unserviceable following components of Table 900mm x 600mm x760mm with drawer and w/o drawer and providing new components all as specified, directed and shown in drg and polising with two coats of french polish to match the existing. (a) Table top of 18mm thick Pre-laminated particle board exterior grade with 4mm thick teak wood edging all around the top of table.
Broken leg made out of Ist class hard wood (Teak wood).
Bottom side broken long rail made out of Ist class hard wood (Teak wood).
Bottom side broken short rail made out of Ist class hard wood (Teak wood).
Broken middle stiffner made out made out of Ist class hard wood (Teak wood).
Broken side stiffner made out of Ist class hard wood. (Teak wood).
Drawers made out of Ist class hard wood/18mm thick prelaminated particle doard and 6mm thick ply wood provide for bottom of drawer with aluminium anodised knob .
(h) Replacement of rubber shoes with S & F new rubber shoe of superior quality with steel plated screws of suitable size complete all as directed by Engr-in-Charge.
REPAIR TO TABLE WRITING FD-275 :- Dismantling unserviceable following components of table writing and providing new components as specified, directed and shown in drg including two coats of polish with french polish to match the existing. (a) Top of 18mm thick exterior grade prelaminated particle board with one side melamine face and balancing white on other side ISI marked.with Ist class HW teak wood beading 4mm thick polishing with french polish (two or more coats) over a coat of wood filler etc.
Drawer front side made of prelaminated particle board, 18mm thick, commercial including knob chromium plated 35mm size.
Bottom of drawer made of 6mm thick, ply wood commercial fitted in drawer frame.
Door shutter made of 18mm thick, prelaminated particle board, commercial with 4mm thick teak wood edging and piono hinges screwed and new knob chromium plated 35mm size.
Back of table writing made of 6mm ply wood commercial BWR type
Side of table writing made of 18 mm thick prelaminated particle board.
Removing old unserviceable legs of tables & S&F new legs made out with Ist class HW seasoned teak wood all as per Drg or of exsiting pattern polishing with french polish (two or more coats) over a coat of wood filler etc.
REPAIR TO TEAPOY FD-278:- Dismantling of unserviceable following components of Teapoy & providing new components all as specified, directed and shown in drg including two coats of polish with french polish to match the existing. (a) Top of teapoy of 18mm thick Prelaminated particle board exterior grade with 4mm thick teak wood edging all around the top of table.
Broken leg with new legs made of 1st class hard wood
All as per item No 37 above but broken short rails / side stiffener.
All as per item No37 here in before but broken long rails / middle Stiffener.
REPAIR TO PEG TABLE FD277 :- Dismantling of following unserviceable components of peg table and providing new components all as specified, directed and shown in drg including two coats of polish with french polish to match the existing (a) Top of peg table with 18mm thick prelaminated particle board including 18 x 4mm thick teak wood edging.
Leg of same size and shape, made out of Ist class hard wood teak.
Top long rails made out of Ist class hard wood teak
Top short/ bottam side stiffeners rails made out of Ist class HW teak
REPAIR TO TABLE CENTRE WITH SUNMICA / GLASS TOP FD274 :- Dismantling of unserviceable components of table center and replacing of following new components all as specified and shown in drg including two coats of polish with french polish to match the existing. (a)Top of table with 18mm thick prelaminated particle board exterior grade including providing 4mm thick teak wood edging all around the top.
Leg of same shapes and size made out of Ist class hard wood (teak).
Top long rail made out of Ist class hard wood teak.
Top short rail made out Ist class hard wood teak.
Side stiffener made out of Ist class hard wood teak all as shown in drg.
Middle stiffener made out Ist class hard wood of same size and shape as shown in drg.
Supply & Fixing new toughened tinted or non tinted as directed ,glass 5 / 6 mm thick or as per existing size and shape & size similar to existing or as per requirement as specified and as directed duly shaped, chamfered, polished and edged made smooth, fixed to the table centre after due repair and polish all as directed and specified.
REPAIR TO SOFA SET 4 SEATER/5 SEATER FD-281,FD373 :-Dismantling of unserviceable components of sofa set 1/3/4/5 seater and replacing of following new components all as specified and shown in drg including two coats of polish with french polish to match the existing. (a) Arm of sofa set single or 3 seater made out of 1st class hard wood duly french polished of size and pattern all as shown on drg
Leg of sofa set single or 3 seater made out of 1st class hard wood duly french polished of size and pattern all as shown on drg.
Supply new foam cushion Make-Sleepwell/Godrej or equivalent 100 mm thick 32 density duly 530mm W x 560 mm L x 100 mm Thick or as per drg covered duly approved and as directed by engr-in-charge .
Supply new foam cushion cover of superior quality tapestry cloth / leather / rexine cover of specified colour and pattern with good quality zip/chain (Not less than Rs300/Mtr) with perfect fir for cushion of size 530mm W x 560 mm L x 100 mm Thick or as per drg, duly approved and as directed by engr-in-charge .
Removing Old U/S tapestry Cloth / Leather / rexine cloth , hession Cloth,,Old Spring, cushion/foam, doori & S&F new tapestry Cloth/ Leather / rexine cloth (not less than Rs 300/mtr), hession Cloth, Old Spring, cushion/foam, doori of Sofa 1 seater or 3 seater or 2 seater while as shown in drg or as per existing item shape/size / design all as required and approved and directed by engr-in-charge.
REPAIR TO TABLE DRESSING GENTS WITH MIRROR FD 230,FD379 :- Dismantling of unserviceable components of table dressing gents and replacing of following new components all as specified, directed and shown on drg. (a) Back side of the box of table with 12mm thick teak wood planks in one piece.
Top of the box of table with 12 mm thick prelaminated particle board with teak veneer face on top.
Bottom of box with 12 mm thick prelaminated particle board with teak veneer face on both sides.
Sides and partition with 12 mm thick prelaminated particle board teak veneer face.
Drawers including Knob all as shown in drg
Looking mirror with new mirror of 5.5 mm thick make - Swastika/Modiguard Atul free from destruction and other defects with complete teak wood frame enclosed with 6 mm thick plywood BWR type.
REPAIR TO TABLE DRESSING LADIES WITH MIRROR FD-251,FD-378:- Dismantling of unserviceable components of table dressing ladies and replaced to following new component all as specified,directed & shown in drg. (a) Top of the table dressing ladies with 18mm thick prelaminated particle board teak veneered face on top and other side commercial.
Back of table with 12mm thick ply wood commercial type BWR
Side and partition with 12mm thick prelaminated particle board teak veneered face on both side
Bottom 12mm thick commercial ply all as specified and as directed
Bottom side ply wood of drawers replaced with 6mm thick ply wood
Replace to unserviceable looking mirror with new mirror of 5.5mm thick Make - Atul, Modiguard or Golden fish free from all defects with complete teak wood frame enclosed with 6mm thick ply wood BWR type
Aluminum channel with standard aluminum channel having two 'U' shaped channels for sliding of plain glass of 5mm thick
Plain sliding glass 5mm thick with new sliding glass all as shown in drg.
REPAIR TO TABLE BED SIDE FD-276:-Dismantling of the following unserviceable components of Table bed side and providing new components in lieu all as specified, directed and shown in drg. (a) Ply wood of back side of Table bed side with 6mm thick plywood BWR type.
Legs with 1st class hard wood
Top of table bed side with prelaminated particle board of existing size.
Shelf of table bed side with prelaminated particle board of existing size.
Side of table bed side with prelaminated particle board of existing size.
REPAIR TO BOOK CASE SMALL WOODEN FD-237/355:- (a) Taking down old U/S top of book case small and S&F new top of 19 mm thick pre-laminated particle board exterior grade ISI mrked as per existing shape and size all as specified and shown on drawing and directed by Engr-in-Charge.
Description all as per items No 76 above but replacement of shelf of book shelf small open with S&F new shelf all as specified and shown on drawing and as directed by Engr-in-Charge.
Description all as per items No 76 above but replacement of old U/S back of book case small and S&F new back of 6mm thick ply wood commercial BWR with required size of screw all as specified and as directed by Engr-in-Charge.
REPAIR TO BED PLY WOOD TOP:-FD-246 (a) Removing of old unserviceable back rest of bed and S&F new back rest as per existing size and shape of Ist class HW seasoned teak wood incl polishing (two or more coats) over a coat of wood filler after preparation of surface.
Removing of old unserviceable foot rest of bed & S&F of foot rest made as per existing size and shape or as per Drg Ist class HW seasoned (teak wood ) incl polishing two or more coats of over a coat of wood filler after preparation of surface.
Removing of old ply top and S&F new ply top of 12mm thick BWR type ISI marked all as shown in Drg. Make- : century/Kitply/Archid/National
Removal of old wooden stiffeners and S&F Ist class Hard wood stiffeners of size 900 x 50 x 60mm suitable for bed all as shown in Drg incl polishing two or more coats of wood filler after preparation of surface etc.
Taking out old unsv long rail of bed plywood and providing of new long rail of Ist class HW (Teak ) of existing shape and size all as specified and Drg incl polishing two or more coats over a coat of wood filler after preparation of surface etc.
REPAIR TO TABLE DINING 6/8 PERSONS FD -273 :- Dismantling of following unserviceable components of table dining 6/8 persons and providing new components all as specified,directed shown in drg including polishing to match the existing . (a) Top of table made of 18mm thick exterior grade prelaminated particle board with 4mm thick teak wood edging all around the top of table dining for 6 persons
Ditoo all as per item No 84 above but for 8 persons of size 1800mm x 900mm.
Long rail made out of Ist class hard wood for table dining 6 persons.
Ditoo all as per item No 86 above but for 8 persons.
Short rail made out of Ist class wood for table 6/8 pers .
Leg made out of Ist class hard wood as specified and shown in drg.
REPAIR TO SIDE BOARD FD-241,FD371,FD372 :- Dismantling of the following unserviceable components of side board and providing new components all as specified, directed shown in drg. (a) Doors Double leaf with 18mm thick prelaminated particle board exterior grade including butt hinges, knob and hasp & stapple complete.
Drawer of side board and S&F new drawer of 18mm thick prelaminated particle board exterior grade of existing shape and size including knob complete all as specified and shown in drawing
Long rail of side board and S&F new long rails of Ist class H.W (Teak)of existing shape and size complete all as specified and shown on drawing and as directed
Short rail of side board and S&F new short rails of Ist class H.W (Teak)of existing shape and size complete all as specified and shown on drawing and as directed
Back of side board made of 6mm thick ply wood commercial type BWR.
Top of side board replaced with 18mm thick extetior grade prelaminated paricle board.
Side of side board replaced with new side of 18mm thick prelaminated particle board as per existing shape and size complete all as specified and shown in drawing.
Leg of side board made out of Ist class hard wood.
Partition of side board and S&F new partition of 18mm thick prelaminated particle board exterior grade existing shape and size complete all as specified and shown on drawing and as directed
REPAIR TO HAT STAND WITH MIRROR FD-23,FD-206,FD230,FD233,FD362,FD361,FD1110:-Dismantling of following unserviceable components of Hat Stand Mirror and providing new components all as specified,directed shown in drg including polishing to match the existing (a) Removing u/s brass / steel /aluminium hooks and supply & fixing Brass / steel / aluminium hook as per approved and specified design , shape, size and installing them on the repaired hat stand with mirror all as directed by engr-in-charge.
Replace to unserviceable looking mirror with new mirror of 5.5mm thick Make - Atul, Modiguard or Golden fish free from all defects with complete teak wood edging enclosed all as directed.
Repair to 18 mm thick Prelaminated Particle board / block board as per existing Hat stand mirror by providing and fixing18 mm thick Prelaminated Particle board / block board as per existing size / shape or as per drawing with teak wood edging all around. all as directed and specified.
REPAIR TO COMPUTER TABLE TP/FD/E6/MAP/03: Dismantling of following unserviceable components of Table computer MAP / TP and providing new components all as specified,directed shown in drg including polishing to match the existing (a) Top of 18mm thick exterior grade prelaminated particle board / MDF Board / Block Board as per existing item with one side melamine face and balancing white on other side ISI marked with Ist class HW teak wood beading 4mm thick polishing with french polish (two or more coats) over a coat of wood filler / or PVC Edging duly fixed with synthetic resin properly and amchine pressed etc. all as directed and specified by engr-in-charge.
Keyboard Rack made of 18mm thick exterior grade prelaminated particle board / MDF Board / Block Board as per existing item including SS/ Alumimium telescopic channel premium quality as required all as directed and specified.
Shelf / rack for CPU / other computer components as per existing size / shape or as per drawing made of 18mm thick exterior grade prelaminated particle board / MDF Board / Block Board as per existing item
Rubber / Plastic premium quality Shoes fitted to the bottom of the frame / side / leg of the table.
Side of table computer made of 18mm thick exterior grade prelaminated particle board / MDF Board / Block Board
M&L for two coats of Painting with synthetic enamel paint of colour as directed after scraping and surface preparation of metallic frame if any or two coats of Polishing after surface prepeartion with premium quality french polish
REPAIR TO CHAIR DINING (OFFICERS) FD/MAP-II/04 :- Opening of joints of damaged/ broken member of chair dining officers where required for replacement including removing seat fabric on 12 mm plywood if necessary, polishing new parts with French polish including cleaning and preparation of the surface to match with existing surface etc. all as directed by Engr-in-charge (a) S&F front leg (left or right ) made out with Ist class HW seasoned Teak wood of size and shape as per existing chair or as per Drg all as directed by Engineer-in-Charge.
Ditto- all as per item No 108 above but rear leg (left or right)
Ditto all as per itemNo - 108 above but Front/Rear/Side members of seat.
Replacement of rubber shoes with S & F new rubber shoe of superior quality with steel plated screws of suitable size complete all as directed by Engr-in-Charge.
Removing of existing U/S cushion from bottom seat of chair dining officers and S&F new foam cushion Make-sleepwell/Godrej, 75 mm thick 40 density duly covered with superior quality tapestry cloth (Not less than Rs 250/Mtr) with fabric on seat of 12mm thick ply and as directed by Engr-in-Charge.
M&L preparation of old wooden surfaces and applying one or more coat of French polish of required shade complete all as directed for the following :- Bed with ply wood top
Chair writing/CBA
Chair Easy
Chair dining
Table 3'x2' with & without drawer
Table writing/med
Table dressing ladies with mirror
Table centre with Sunmica Top / Glass Top
Table bed side
Teapoy/Teapoy FD
Table Peg
Book case small
Table dining 6 Pers
Tabel dining 8 Pers
Hat Stand Mirror Large /Small
Almirah Mess Utensil Wooden
Rifle Rack for 20 / 1 / 2 /4 rifles wooden
Chair dining officers MAP
HALLIOX ENTERPRISES
SANDEEP ASSOCIATES
M/S CHANDER SHEKHAR
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid