REPAIR/ REPLACEMENT OF ELECTRIC WIRING, FITTING FIXTURE AND CONNECTED WORK IN ZONE A AND STREET LIGHT, SECURITY LIGHTS, FLOOD LIGHTS HIGH MAST LIGHT AND S/L PANEL AND FEEDER PILLAR BOX AND OTHER CONNECTED WORKS AT POCKET B AT PATIALA

Amount

'Notes: (i) Please refer Schedule 'A' Notes of tender documents.

Taking down carefully copper/aluminum point wiring (light, fan, socket or power) complete with fittings and fixtures such as switches, ceiling roses, pendants, regulators, socket, lamp holders brackets, bulk head fittings etc removing material for taking credit ( credit shall be recovered as per credit Sch attached) and also making good disturbed surfaces of wall, floors etc all as specified and as directed.

M&L for point wiring with 1.50 sqmm in copper conductor cable ( multistrand) FRLSH single core PVC insulated cable into existing PVC/steel concealed conduit with all accessories ie PVC gutties etc terminated including sunken/pressed metal flush box and white modular cover plate with frame for mounting of switches /sockets/ fan regulators etc and continuous earth wire 1.5 Sqmm copper cable PVC insulated FRLSH controlled by one switch for one light/fan/sockets point/ all as specified and directed in ceiling Portion surface conduit wiring to be done. . Note : i) Eye/bottle thimbles shall be used for connection in switches/sockets & MCB's in DB's without any extra cost ii) Electric rewiring should be done in proper colour coding i.e. Red for phase, Black for neutral and Green for Earth. (iii) Cutting chasing whereever required including conduit pipe and making good the disturbed surface shall be part of job at no extra cost

All as per item No 3 above, but for one 3/5 pin socket outlet 5 Amp on the same board with other switches complete all as specified and as directed.

All as per item No 3 above, but for one 3/5 pin socket outlet 5 Amp on independent board complete all as specified and as directed.

All as per serial item No 3 here-in-before , but for one socket outlet 15 Amps on independent board with 2.5 Sqmm copper conductor ( Multi-stranded) PVC insulated and unsheating electric cable 1100 volts (ISI Marked) including PVC insulated and unsheathed electric cable 1100 volts 1.5 Sqmm copper stranded conductor as continuous earth wire connected to common earth dolly complete all as specified and as directed.

M&L for point wiring with 1.50 sqmm in copper conductor cable ( multistrand) FRLSH single core PVC insulated cable in and including PVC concealed conduit with all accessories ie PVC gutties etc terminated including sunken/pressed metal flush box and white modular cover plate with frame for mounting of switches /sockets/ fan regulators etc and continuous earth wire 1.5 Sqmm copper cable PVC insulated FRLS controlled by one switch for one light/fan/sockets point/ all as specified and directed in ceiling Portion surface conduit wiring to be done. . Note : i) Eye/bottle thimbles shall be used for connection in switches/sockets & MCB's in DB's without any extra cost ii) Electric rewiring should be done in proper colour coding i.e. Red for phase, Black for neutral and Green for Earth. (iii) Cutting chasing whereever required including conduit pipe and making good the disturbed surface shall be part of job at no extra cost

All as per item No 7 above, but for one 3/5 pin socket outlet 5 Amp on the same board with other switches complete all as specified and as directed.

All as per item No 7 above, but for one 3/5 pin socket outlet 5 Amp on independent board complete all as specified and as directed.

All as per serial item No 7 here-in-before , but for one socket outlet 15 Amps on independent board with 2.5 Sqmm copper conductor ( Multi-stranded) PVC insulated and unsheating electric cable 1100 volts (ISI Marked) including PVC insulated and unsheathed electric cable 1100 volts 1.5 Sqmm copper stranded conductor as continuous earth wire connected to common earth dolly complete all as specified and as directed.

M&L for Modular Socket 6A/16A - 2/3 pin combined 2 module type complete all as specified and as directed.

M&L for Modular Socket, 6A - 2/3 pin combined 2 module type complete all as specified and as directed.

M&L for Modular switch 1 way 6A, 1 module type complete all as specified and as directed.

M&L for Modular switch 1 way 16A, 1 module type complete all as specified and as directed.

Material and labour for Modular Bell push 6A 1 module complete all as specified and directed.

M & L for Fan step regulator modular type , 2 module ,120W ,AC 230 Volt complete all as specified and as directed.

Material and labour for ceiling rose modular type surface type, 65 mm x 50 mm two to three terminals / PVC / polycarbonate, isolated body fixed on PVC block complete all specified and as directed.

Supply and fixing for sub main wiring two single core PVC insulated and unsheathed cable with 6 Sqmm multi -strand copper conductor drawing into PVC / steel existing concealed conduit with 6.0 Sqmm PVC copper conductor cable as in earth wire system ,including taking out old wiring complete all as specified and as directed.

Supply & fix in replacement of existing unserviceable Sheet metal enclosure with new DB’s with degree of protection IP 54 suitable for MCBs of single pole and neutral 8 way double door type with 200 amp rated bus bar complete all as specified and as directed.. Note: i) Connnections of the MCB'S shall be done with appropriate size of brass/Cooper thimble. ii) The disturbed surface shall be match with existing shall be part of job.

Supply and fix in replacement of MCB SP up to 6-32 Amp complete all as specified and as directed.

Supply and fixing 1100 volts grade heavy duty cable PVC insulated stranded aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections, one twin core cable flat or circular stranded conductor size of 10 Sqmm, 2 core complete all as specified and as directed.

M&L for replacement of existing UNSV switch piano flush type single pole one way 5/6 Amp complete all as specified and as directed.

M&L for replacement of existing unserviceable socket outlet 2 in 1, 3 pin 5 Amp complete all as specified and as directed..

M&L for replacement of existing unserviceable socket outlet 2 in 1, 3 pin 5 & 15 Amp flush type complete all as specified and as directed.

M&L for replacement of existing UNSV switch piano flush type single pole one way 15 Amp complete all as specified and as directed.

Supply and fix in replacement of Recess mounted LED luminaire with more light distribution and clutter free ceilings of 36 watt suitable for gridd celling Cutout dimensions: 2x2 Model :Immaculate LED Trimless complete all as specified and as directed.

Supply & fix in replacement of existing unserviceable wall mounted fitting with Decorative, wall mounting, style antique golden wall lamp with Single shades round gold and inclding 10 W bulb complete all as specified and as directed.

Supply & fix in replacement of existing unserviceable wall mounted fitting with Decorative, wall mounting, style antique golden wall lamp with two lamp shades round gold and inclding 10 W bulb complete all as specified and as directed.

Supply and fix in replacement of MCB SPN 40 Amp complete all as specified and directed.

Supply & fix in replacement of existing unserviceable batten fitting , decorative ultra slim square profile LED lighting fixture with extruded polycarbonate environmental friendly energy efficient 20W including neccesary fitting on wall and making electric connection from ceiling rose to connector with suitable size of electric cable and making good the disturbed surface complete all as specified and as directed.

Supply & fix in replacement of existing unserviceable mirror light with Linear & compact 9W mirror light with decorative grey end caps, polycarbonate body and ribbed opal diffuser of capacity 9 watt complete all as specified and as directed.

Material and labour for angular type lamp holder, PVC/ polycarbonate type with back plate suitable for 15/18 watts for batten fitting, including plastic square board of required size complete all as specified and as directed.

S & F LED inverter type Lamp / Ball Lamp 9 Watt complete all as specified and as directed.

Material and labour for call bell ding dong AC 230 volt single pole complete all as specified and as directed. (ISI Marked)

S & F new generation energy saving and environmental friendly long life LED building security light 1x25 watts made up of pressure die cast alluminium housing with high power LED as light source and lense embedded PC cover having TOP OPENING separate driver compartment with IP65 protection and impact resistance of IK07, with all accessories including suitable bracket with 32mm bore light grade GI pipe bemd to shape, including MS clamp of size of required size and PVC cable 1.5 Sqmm twincore from ceiling rose to light fittings complete all as specified and directed.

Supply and fix in replacement of MCCB 4 Pole 63 Amp complete all as specified and as directed.

Supply and replace modular plug and play All-in-One PVC box encloser with protected socket 16 Amps including MCB SPN 20 Amps for protection device complete all as specified and as directed.

Supply and replace environmental friendly, ultra modern, energy saving, surface mounted, decorative oval bulk head edge-lit led luminaire comprising of high brightness leds of capacity10 Watt complete all as specified and as directed.

Supply and replace Led post top fitting 40W powder coated aluminium die cast and spun aluminium with clear/ opal diffuser suitable for landscape lighting in IP65 including GI Pipe of suitable dia and height reqd at site including PCC work and connection properly with existing LT OH line or from main MCB DB with PVC aluminium conductor service wire 2 core 6 sq mm grouted in PCC flooring complete all as specified and as directed.

Supply and replace Led post top fitting 25W powder coated aluminium die cast and spun aluminium with clear/ opal diffuser suitable for landscape lighting in IP65 including GI Pipe of suitable dia and height reqd at site including PCC work and connection properly with existing LT OH line or from main MCB DB with PVC aluminium conductor service wire 2 core 6 sq mm grouted in PCC flooring complete all as specified and directed .

Supply & lay in replacement of existing unserviceable XLPE insulated, armoured heavy dutyelectric cable with aluminium conductor, 1100 volt grade of crosssectional area 35 Sqmm 3.5 Core complete all as specified and as directed.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for laying of Pipes, cables, poles,Stay and strips etc including getting out of any kind of soil complete all as specified and as directed.

All as per item No. 42 as above but exceeding 1.5m but n. exc 3m in depth complete all as specified and directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers not exceeding 25 cm each layer of any kind of soil complete all as specified and as directed.

Removing excavated material from site not exceeding 50 mtrs from starting point and depositing where directed at level not exceeding 1.5 mtr above the starting point complete all as specified and directed.

Material and labour for old size brick well burnt, laid flat, dry in trenches for cable protection complete all as specified and directed.

M & L for Sand cushioning for cables 8 cm below the cable and 15 cm above the cable complete all as specified and as directed.

Material and labour for replacement of GI tubing light grade 40 mm bore for passing through cables under the floor ,along the wall or along the pole complete all as specified and directed.

Supply and fix in replacement of square Surface mounted LED panel PDC aluminium housing and high translucent frosted plastic diffuser of 18 w and luminair efficacy 100 lm/w complete all as specified and directed

Supply and fix in replacement of round Surface mounted LED panel PDC aluminium housing and high translucent frosted plastic diffuser of 18 w and luminair efficacy 100 lm/w complete all as specified and directed

M&L in replacement of existing unserviceable earthing complete with galvanized steel earth plate electrode 600x600x6mm tthick buried directly in ground(earth plate not less than 2.25 mtr deep below the normal ground level ) with top edge of plate not less than 1.5 mtr below the normal ground level connected to galvanized earth wire 4mm dia by means of nuts bolts,washers,check nuts of iron or steel including test point PCC pits and RCC cover in PCC 1:2:4 (type B-1) including iron angle frme 40*40*6mm. and medium grade GI watering pipe 20mm dia with funnel and wire mesh and 15 mm bore GI pipe light grade proection pipe including excavation and charcoal ,common salt surrounded with 15cm all around the plate complete all as specified & as directed.and shown in EP-3 of SSR Part-I. Note - Earthing result should not be less than 3 Ohms

S&F in replacement sheet metal enclosures distribution boards, double door three phase 415 volts 4 ways confirming to IP 54 (one incoming three phase & four out goings three phase )for MCCB, comprising three phase four wire copper strip bus bar of appropriate capacity complete all as specified and directed and comprising of the following (a) MCCB FOUR POLE 100 AMPS AC 415 VOLTS 10 KA IHLGSF0100 =01 NO as incoming (Note :- (i)The DB shall be VTPN series of MDS-LOADKONTAKT (ii) The DB shall be flush fixed ,and making good the disturbed surface matching with existing specifications shall be part of job at no extra cost. (iii) connection of theMCCBs/ MCBs with cable shall be made through appropriate size pin /bottle type thimble -properly crimped. (iv) all the vacant holes of the DB shall be provided with blank plates of appropriate size. (v) double continuous earth wire shall be provided for each three phase DB from earthing mains dolly.

Supply and fix in replacement of MCCB 100 Amp 4 Pole 415 V complete all as specified and as directed.

Supply & fix in replacement of existing unserviceable batten fitting , decorative ultra slim square profile LED lighting fixture with extruded polycarbonate environmental friendly energy efficient 10 W including neccesary fitting on wall and making electric connection from ceiling rose to connector with suitable size of electric cable and making good the disturbed surface complete all as specified and as directed.

Supply and fix in replacement of MCB SPN 63 Amp complete all as specified and directed.

Supply and fix in replacement of MCB TPN 63 Amp complete all as specified and directed.

Day to day complaints of street lights of various type for working height varies from 9m to 15m in the juridiction of AGE E/M, GE (S) Patiala within 8 km radius incl removing carbon from LED light connection by deploying dedicated team having the experience in the same field. Contractor has to provide all required Tool and plants for street light fault rectification. Contractor will make record of all given complaints and rectified complaints updated on daily basis. Street light complaints should be rectified within 24 hrs after intimation via any communication mode. If the comaplint is not rectified within stipulated time contractor will bear penality of Rs 200 per day per complaint & complete all as specified and as directed.. Note :- (i) Necessary suitable vehicle shall be contractors own arrangement for carrying man power, tools and store. (ii) Detecting default will be considered one Job. (iii) The complete arrangement ie. veh, manpower tool & plants and switching ON & OFF street lights on daily basis is enclusive in this quoted rate.

Supply and fix in replacement electronic driver with power factor correction suitable for 35/45/60 Watt LED street lights, input AC 85-300V, input frequency 50/60 Hz, output voltage DC 22-38V, output current 1500mA (+-) 5%, waterproof level :IP 65, shell material : aluminium with IS 15885, complete all as specified and directed.

Supply and fix in replacement electronic driver with power factor correction suitable for 70/90/120 watt LED street lights, input voltage 70V AC to 300 V AC , power factor 0.99 (Unity) , over voltage 300 V cutt off , short and open circuit protection isolated, surge protection up to 10 to 12 Kv, maximum output voltage 55 Kv, maximum current up to 1.5a waterproof level :IP 65, shell material : aluminium with IS 15885, complete all as specified and directed.

Supply and fixing LED street light fitting 120 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete withIP 66 protection complete, all as specified and directed.

All as item No. 60 Above but of size 90 Watt.

All as item No. 60 Above but of size 70 Watt.

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 66 protection complete including connecting to junction box and fixing of light fitting to existing GI bracket painted in silver colour & steel clamps complete with accessories suitable for fixing to the RCC LT Pole of 9 mtr complete all as specified and directed.

Supply and fixing LED street light fitting 45 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 66 protection complete including connecting to junction box and fixing of light fitting to existing GI bracket painted in silver colour & steel clamps complete with accessories suitable for fixing to the RCC LT Pole of 9 mtr complete all as specified and directed.

Supply and fixing LED street light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 66 protection complete including connecting to junction box and fixing of light fitting to existing GI bracket painted in silver colour & steel clamps complete with accessories suitable for fixing to the RCC LT Pole of 9 mtr complete all as specified and directed.

Supply and fixing LED flood light 150 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp, complete all as specified and as directed.

Supply and fixing LED flood light 100 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp, complete all as specified and as directed.

Supply and fixing in repair of automatic street light control switch single phase 5-8 KW 40 Amps using infrared sensor based nature switch for automatic switching of street lights. Nature switch operation should be based on Natural light lux level. The sensor along with suitable power contactors and incoming out going MCBs should be enclosed pole/wall mounted thermo plastic polycarbonate enclosure conforming to IP 66 protection class 2.complete all as specified and as directed.

Supply and fixing post top lantern LED type 36/40 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete. and incl cost of masonary work for fixing of light on gate pillars on suitable size GI tubing duly silver painted incl colouring/white wash of masonary surface for matching of existing colour/surface complete all as specified and as directed.

Supply and fix in replacement street light panels analog time switch (with battery back up), 3P Module, 24 hours program, programmable every 15 min, current capacity 16 Amps, suitable for 63/40/32 Amps street light timer, AC 3 phase, 110-240 V AC (1CO) base/ Din 16 pulse digital time switch,complete all as specified and directed.

Supply and fixing PVC insulated copper cable 2.5 sqmm three core multistanded flexible 1100 volts complete all as specified and directed.

S & F as in replacement brackets 1.2 m long made to shape fabricated out of GI pipe Light grade ISI marked 40 mm dia incl provn of socket nipple welded at once end to suit the light fitting and fix to pole including clamps with nuts and bolts of suitable size cutting, drilling and welding its fix to pole and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

Suppy and fix rigid non-metallic PVC conduit medium grade 20 mm dia exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc complete all as specified and directed.

M&L Dismantling the alternator of DG set of capacity 160 KVA from its base by using chain and pulley after removing the coupling with the engine, removing all nut, bolt with washer and all electrical connections of the alternator, shifting the alternator to work shop by crane and vehicle, opening into parts, checking all winding like main stator/rotor winding, exciter stator/rotor winding. Rewinding the main rotor and exciter rotor by using the "F" class insulation and existing gauge and type of magnet wire that was on the original motor, varnishing, heating, drying, greasing the bearings including replacement of unserviceable bearings, Re-fixing the complete including connection to the terminal box of the alternator at work shop and shifting the same to the site, Fixing the alternator to its base carefully by using chain and pulley, connecting it with existing engine including checking the alignment of alternator with the engine, connecting all electrical connections of the alternator and testing the DG set on "OFF/FULL LOAD", matching to the existing range of RPM of the engine, out put voltage 415 volt and testing complete all as specified and as directed.

Taking down self starter assembly of DG set of capacity 62.5 /160 KVA, 12 volt / 24 Volts from the existing position, opening in to parts, sort out the unserviceable items like carbon brush, pinion etc. and replace the same with new one including rewinding of field coils, re-assembling and re-fixing the same in its original position including to and fro conveyance charges to work shop and testing complete all as specified and as directed.

Dismantling fuel injection pump (FIP) of DG set carefully from 62.5 to 160 KVA, opening in to parts, for maintenance, servicing, tuning by overhauling and calibration up to 6 cylinders, adjustment of nozzle pressure and other controls, replacement of unserviceable spares, re-fixing the FIP on its original position including to and fro charges to thr work shop and all as per the direction & complete all as specified and as directed.

S&F Single Phase SMC Junction box suitable for mounting on LT RCC pole of 9 mtr long, box having Al busbar 20 Amp rating with 6 Amp MCB ('B' series) control, mounted on insulators with 2 clamps of copper strip for earthing of the armoured of the cable complete with making holes for connecting cables etc nuts bolts etc front openable hinged cover suitable for mounting on steel clamps nut bolt etc pvc adopters and PVC hose pipe upto cable trench for incoming and outgoing cables, factory made duly painted with powder coating process complete as specified and directed.

Supply & install in repair Lead Acid Battery 12 V 150 AH complete all as specified and directed.

Supply and replacing AVRs unit of alternator of DG Set 62.5 to 160 KVA capacity as per existing type and model complete all as specified and as directed.

Supply and erecting in replacement LT PCC pole 9 Mts long cross sectional area 102 mm x 172 mm at top and 102x279 mm at bottom class 10 complying with requirement of relevent IS and painting the pole upto 5 feet from ground level with black and yellow alternate strip of 30 CM each with synthetic enamel paint incl removing of broken pole debris complete all as specified and as directed. Note:- (i) After commissioning of new pole contractor would liable to connect all the ACSR conductors to the new pole including insulators and cross arms etc inclusive in this unit rate. (ii) Excavation ,PCC shall be measured and paid separately.

M &l for PCC 1:4:8 TYPE D-2 using 40 mm graded broken stone aggregate as in mass concrete in foundations etc . complete all as specified and directed.

M&L for PCC 1:2:4 type B-2 using 20 mm graded broken stone aggregate as in mass concrete in foundations etc complete all as specified and directed .

Material and labour for PCC 1:3:6 type C-1 using 20 mm graded stone aggregate for coping around the pole strut above ground level, foundation of stay etc. including neccassory form work and finishing the surface fair and even without using extra cement complete all as specified and as directed.

Supply,laying, commissioning and testing or passing through pipe, XLPE insulated, armoured, electric power UG cable (Heavy duty) with aluminium conductor, 1100 volts grade in duct / trenches for small length for extension/replacement of the defective cable of nominal cross sectional area 10 sqmm 4.0 core including brass compression cable gland, terminal aluminium lugs etc making connection and testing complete all as specified and directed. Note :-(i) Pipes and bricks for protection, mild steel clamp nut and bolts sand cushioning shall be measured and paid separately.

All as per item No. 84 here-in before but for cable of size 4 core 16 sqmm complete all as specified and as directed.

SWAMI ENGINEERS (BID ID -3331061)

Mohinder Pal and Sons (BID ID -3323294)

RAVI INDER SINGH (BID ID -3329963)

V.TECH ELECTRICAL COMPANY (BID ID -3330035)

Jawandha Enterprises (BID ID -3339126)