Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹9.3 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | Rejected-Technical | - | Rejected-Technical Not Satisfying NIT Stipulations |
Tender Value
₹10.3 L
EMD Value
₹20,600
Closing Date
16 Nov 2023, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Superintendent Engineer(K)
CED,BARC, Trombay, Mumbai
Renovation and maintenance of Room No 14, 15, 16 and 17 in shed 64, South Site, BARC, Trombay, Mumbai
2023_BARC_778142_1
BARC/CED/ET/56/2023-2024 Dated 20.10.2023
Open Tender
Civil Works
Item Rate
183 days
South Site, BARC, Trombay, Mumbai
Please refer Tender documents.
8 documents required · 8 mandatory
₹0
₹20,600
27 Feb 2024
27 Oct 2023
21 Nov 2023
27 Oct 2023
16 Nov 2023
1 Nov 2023
Amount
Providing and laying in position cement concrete of 1:3:6/ M-10 with minimum cement content 220 Kg/Cum (1 cement, 3 crushed sand, 6 graded stone aggregate of maximum size 20 mm) including consolidation, finishing, curing etc. complete as per specifications and drawings but excluding the cost of Form work shuttering, centering Complete at all levels.
Providing Reinforcement Steel for reinforced cement concrete at all levels including supplying, preparation of bar bending schedules, cutting, bending, transporting, fixing, tieing in position with PVC coated G.I binding wire, all labour charges, cost of cover blocks in specified grade of concrete etc. complete as per specifications and drawings. "Using TMT bars of specified grades all dia. bars TMT bars confirming to IS 1786. All test reports to be provided along with the supply of the materials."
Providing and laying in position Reinforced Cement Concrete (RCC) of grade M-30 using 20mm maximum size aggregates and crushed sand of approved quality including admixtures of approved brand and quality (plasticiser or super plasticiser) if required, including weigh batching, mechanical mixing, transporting, placing, vibrating, consolidation, finishing, curing etc. complete but excluding the cost of centering, shuttering and reinforcement complete as per specifications.
up to Plinth Level
In Super structure Note:(i) In view of limit on water-cement ratio for durability requirements, concrete admixtures (Naphthalene / Melamine based super plasticizers) shall be used after taking prior approval of Engineer-in-Charge and the rates quoted for these items shall be inclusive of the cost of admixtures, trial mixes, testing (at site & at approved labs), etc. complete.ii) All projections, fins etc. in the concrete surface formed at the joints in the formwork should be ground & flush and finished at no extra cost.iii) Minimum cement content .
Extra for RCC/PCC Using Ready Mix Concrete from outside project area including transporting and pumping from approved batching plants .
Providing, centering, shuttering Form work using PVC film faced plywood to get a neat form finish surface for all types of structures including necessary strutting, proping, staging, supports etc and deshuttering the same after the specified time all as per drawings, specifications and as directed by the Engineer-in-charge at all levels
For Sub Structure
For Super Structure
Providing and constructing Half brick masonry using Flyash/ Flyash Lime bricks with minimum 70 kg / Sq.cm strength of approved make and size in partition walls in C.M 1:4 (using crushed sand) including scaffolding, raking out joints, curing etc. complete and with stiffners of RCC 1:2:4 (105 X 75 mm size) at every 900 mm height including form work curing etc. complete as per specifications but excluding reinforcement in Super Structure up to Floor - II level. (Reinforcement will be paid under relevant item)
Providing and constructing brickwork in cement mortar 1:6 using crushed sand with Flyash/ Flyash Lime bricks with minimum 70 kg/ Sq.cm strength of approved make and size in super structure above plinth up to and including Floor II level including, scaffolding, raking out joints, curing, cleaning complete all as per specifications and drawings.
Providing 15 mm thick plastering using Ready mix internal plastering compound of approved make for internal faces of brickwork / concrete surfaces including preparation of the surface, curing, cleaning, scaffolding complete all as per specifications and as directed at site by the Engineer-in-charge
Providing 20 mm thick plastering using Ready mix external plastering compound of approved make for external faces of brickwork / concrete surfaces including preparation of the surface, curing, cleaning scaffolding up to 10 metres height complete.all as per specifications including forming drip moulds wherever necessary and as directed by the Engineer-in-charge
Extra Over Item No 8 & 9 above for Providing 10 mm thick plastering using Ready mix Plastering compound of approved make for Internal/ External faces of brickwork / concrete surfaces Over specified thickness including preparation of the surface, curing, cleaning, scaffolding complete all as per specifications and as directed at site. Plastering to be executed over existing plaster removed surface which includes rough plastering on undulated surfaces.
Providing and fixing 15-17 mm thick gang saw cut mirror polished granite (premoulded and prepolished) machine cut for kitchen platforms, vanitiy counters, Wash basin Counters, Door Frames, window sills, facias and similar locations of required size of approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (using coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing the edges to give high gloss finish etc. complete at all levels
Providing and fixing anodized aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / Z sections and other sections of approved make conforming to IS 733 and IS 1285 fixed with rawl plugs and screws or with fixing clips or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC / neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically whereever required including cleat angle, aluminium snap beading for glazing / panelling, C.P brass / stainless screws all complete as per drawings and and directions of Engineer-in-charge including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of PVC / neoprene gasket required filling the gaps using silicon grout sealent etc. (fittings glazing and panelling shall be paid for separately)
Anodised Aluminium sections (Minimum anodizing thickness of 15 micron)
Extra for Colour Anodizing / Dyed anodizing on Aluminium sections & sheets
Providing and fixing approved quality stainless steel body roller wheels of approved make for sliding shutters
Providing and fixing approved quality and shape star locks cum handle of approved make for sliding shutters
Providing and fixing glazing in aluminium doors, window, ventilator shutters and partitions etc with PVC / Neoprene gasket etc. complete as per the architectural drawings and directions of the Engineer-in-charge (Cost of snap beading shall be paid in basic item)
With tinted colour float glass panes of 4.0 mm thickness
With clear float glass panes of 5.00 mm thickness
Providng and fixing Aluminium Grill 10 mm thick in natural Silver anodising of min 15 Microns with a opening size of 80 mm x 66 mm and Minimum weight of 3.13 Kg/ Sq.M including providing and fixing Suitable 'F' / 'H' section outer frame and mullion fixing with screws complete all as per specifications and as directed at site by the Engineer-in-Charge . Aluminium alloy shall be of 6063-T6 with Yield strength of minimum 6.5 kg/ sq.mm. Note : Tentative / suggested make for guidance of bidder(s) : M/s. Deco Grille make - Model - DG 102 or approved equivalent.
Providing and fixing Glazed VITRIFIED floor tiles of approved make of size 600 X 600 mm conforming to IS 15622 in all colours and shades in Glossy or Matt or satin finish laid over a bed of minimum 20 mm thick bed of cement mortar 1:4 (using Crushed sand) and jointing with grey cement slurry including grouting with the joints with white cement based Tile Grout of approved make and matching shade complete as per patterns, drawings and specifications complete as directed by the Engineer-in-charge
Providing, supplying and fixing hollow metal flush steel doors 40 mm thick of approved make consisting of door frame and shutters and all hardware fittings & fixtures, ceramic tape & fastener (wherever required), frame made out of 14g thick G.I sheets and shutters made of 16g thick sheets, hollow portion filled with honeycomb craft paper, including necessary stiffners in shutters and frame, vision panel of specified size with 6 mm glass and clip on pressed steel frame for vision panels, fixing 4 nos heavy duty stainless steel 304 grade ball bearing hinges, mortise / dead lock of approved make, a pair of 200 mm long stainless steel handles, 250 mm long stailless steel tower bolt, etc. frame hollow portion filled with PCC 1:2:4, necessary hold fast embedded in concrete, fixing in concrete with anchor fastners. finished with Pure Polyester Powder coated of approved colour and shall have passed minimum 250 hours of salt spray test incl. Shop drawing submission in advance for approval of Engineer-in Charge all complete as per drawings & specifications and as directed by the Engineer-in-charge.
Providing structural repairs in old damaged concrete structures / surfaces with approved Polymer with following operations 1) Removal of loose/Spalled or damaged concrete by chipping and cleaning the concrete surface and reinforcement steel with wire brush and with water 2) Cleaning the re bars with Acetone for complete rust removal and washing with water to make the surface clean. 3) Applying protective coat / bond coat using polymer and cement in the proportion of 1; 1.5 (1 part of polymer and 1.5 parts of cement in synthetic enamal paint like consistancy with brush 4) Reinstate the area with polymer modified mortar in layers of maximum 20 mm with the proportion of Cement 50 Kg : washed and dried river sand 87.50 kg ; silica sand 37.50 Kg. mixed with 10 litres of Polymer (or 1 Kg cement : 1.75 kg washed and dried river sand ; 0.75 Kg silica sand : 200 ml polymer) 5) If thickness of repair exceeds 20mm , after every 20 mm thick repair, bond coat as per 2 above to be applied and further thick of repair to be continued for each layer. This work is inclusive of all materials, labour, complete all as directed at site using approved polymer suitable for structural repair shall be used)
Repairs to the RCC structural members of concrete surface/RCC brackets with form finish, concrete finish using Super Fluid Micro Concrete general purpose approved grout powder using Roffe concrete repair approved equivalent SFMC, item includes the operations of breaking cracked/spalled concrete members along the cracks and taking down the debris to ground level and stacking/ disposing of debris with in a lead of 50 mtr as directed ,exposing and cleaning the reinforcement bars thoroughly by tapping wire brushing emery papering and finally by chemicals such as acetone or eqvt.and washing the surface by waterjet to remove acetone and brushing subsequently and applying a protective coat of polymer and cement mixed in the ratio of 1:1.5 (1 polymer : 1.5 cement ) by volume to the reinforcement bars and casting /grouting with Super Fluid Micro Concrete in the proportion of grout and aggregate of quartz/granite rounded chips of size 6 mm down graded or eqvt in the ratio of 1 powder: 0.50 aggregate by weight (100 kg SFMC: 50 kg Quartzchips) including cost of double steel scaffolding and required Form work and removal of same (Only form work will be paid under relevant items) after grouting curing etc. complete all as per specification and as directed by Engr.- In-charge. Note: 1. Mode of measurement shall be in kg of SFMC powder consumed only.2. SFMC powder will be supplied by Contractor. 3. Protective coat to reinforcement and bond coat over adjacent concrete surface are inclined in the item. 4. Reinforcement and Formwork for Jacketing shall be measured and paid under relevant item. 5. Fixing Weld mesh if required and same will be measured and paid under relevant item.
Providing, applying wall painting two coats on new work with premium plastic emulsion paint of approved brand to give an even shade without cement primer.including preparation of the surfaces, scaffolding complete. as per specifications and as directed by the Engineer-in-charge
Dismantling old plaster / skirting carefully , raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 100 m lead
Dismantling doors, windows and clear storey openings (steel / wood) shutter including chowkhats, architraves, holdfasts etc. complete and stacking within 100 m lead (full windows) Of area 3.00 SqM and below
Taking out doors, windlows and clear storey openings (steel / wood) shutter including stacking within 100 m lead (only shutters) Of area beyond 3.00 Sq.M
Lead charges for Debris for Lead Exceeding 1 KM but not exceeding 2 KM, by mechanical transport including loading, unloading, stacking / levelling etc. Note: The rates in respect of above Item is applicable for NET Quantities arrived at after making deduction for voids @ 30% from corresponding TRUCK Measurement.
stage.html
html • 0.04 MB
techsummary_817958.pdf
PDF • 0.25 MB
BOQ Comparative Chart
xlsx • 0.01 MB
finsummary_817958.pdf
PDF • 0.26 MB
WO70ET56.pdf
PDF • 4.86 MB
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .