REPAIR TO CERTAIN BR AND PLUMBING WORKS IN OTM MD ACCN OF MRC OF AGE BR-I AREA UNDER GE SAUGOR

Amount

Demolition of brick work or stone/boulder masonry, built in cement mortar incl all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Taking down Kota stone and tiles of any description or thickness laid, bedded and pointed in any mortar, complete all as specified and directed.

M&L for brick work with sub class 'B' old size bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified & directed.

M&L for brick work with sub class 'B' brick in cement mortar 1:4, straight or curved on plan exc 6m mean radius complete all as specified and directed.

Taking down cement plaster from brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

M&L for coloured designer glazed ceramic tiles of size 450mm x 300mm x 7mm to 8mm thick on vertical surfaces such as skirting/dado etc, set and jointed in neat cement slurry and pointed in white/ coloured cement to match the colour of tiles laid over and including 10mm thick rendering in CM 1:4 complete all as specified and directed.

M&L for 16 mm to 18 mm thick Granite slab of any shade ( table rubbed and polished )machine cut for vertical surface of pillars, floor /shelves in steps, jambs, pillars, window cills& cooking plateforms over and including 20 mm thick screed bed or bedding layer of CM (1:4) including pointing in white/colour cement 1:2 using marble dust with admixture of pigment to match shade of the slabs laid bedded and pointed in any mortar complete all as specified & directed

M&L for vitrifed ceramic tile light shade 10 mm thick (square/rectangular) polished area of each tile n exc.0.36 sqm as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick screed bed in CM(1:6) complete all as specified and directed

M&L for non skid ceramic coloured tiles 7 to 8mm thick area of each tile exc 0.06 Sqm but not exc 0.11 Sqm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match the laid over and including 15mm thick screeed bed layer in CM 1:6 complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8mm thick area of each tile exc 0.11 Sqm but not exc 0.18 Sqm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick screeed bed layer in CM 1:6 complete all as specified and directed.

M&L for providing 75mm thick PCC type C1, 1:3:6 (using 20mm graded stone aggregates) as in sub base complete all as specified and directed

M&L for 25 mm thick cement concrete 1:2:4, type B-0 (using 12.5 mm graded stone aggregates) as in levelling course of sub base finished even and rough to receive the topping layer complete all as specified and directed.

M&L for 20 mm thick screed bed or bedding layer in cement mortor 1:4 for laying Kota stone slab complete all as specified and directed.

M&L for machine cut Kota stone slab flooring 550mm x 550mm x 20mm to 22mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of kota stone including 10 cm wide white marble strip laid in pattern including rubbing and polished with mirror finished complete all as specified and directed.

M&L for Kota stone slab 12mm to 15 mm thick as in skirting fixed over 10mm thick rendering in CM (1:4) & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete all as specified & directed

M&L for grinding and polishing mirror finish of existing Kota stone slab flooring complete all as specified & directed

M&L for precast cement concrete 1:2:4 type B1 (using 20mm graded stone aggregates) as in lintels upto 1.5 m clear span, cills, steps; seismic & other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded for chamfered angles and throating, complete all as specified and directed.

M&L for providing PCC 1:3:6, type C1 (using 20mm graded stone aggregates) as in surface channels and drains complete all as specified and directed

M&L for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped end complete all as specified and directed.

Add or deduct for each 25 mm girth or part thereof over or under 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped end etc complete all as specified and directed.

Demolition of cement concrete of any description and in any position including sunken floors complete all as specified and directed.

M&L PCC 1:4:8, type D2 (using 40mm graded stone aggregates) as in foundation/ filling and mass concrete and sub base of floors complete all as specified and directed.

M&L for providing 50 mm thick PCC 1:3:6, type C1 (using 20mm graded stone aggregates) as in plinth protection finishing cement concrete surface even & smooth without using extra complete incl forming construction joints 10mm x 20mm filled with bitumen and coarse sand mortar all as specified and directed

S&F in repair convex safety traffic mirror 80 cm outer diameter, shutter proof , weather proof and impact resistant suitable for indoor as well as out door use with hood including pole, mounting bracket suitable for traffic road, incl MS pipe 80 mm dia of 1.90 m length (measurement of pipe to be taken for edge pole) embeded in PCC 1:2:4 in post including excavation and makinging the surface good complete all as specified and directed. Make:- Frontier Item code-FCMO-80 or equivalent make as approved by GE

S&F in repair shutter proof , weather proof and impact resistant suitable for indoor as well as out door use with hood convex safety traffic mirror 80 cm outer diameter except pole, mounting bracket suitable for traffic road complete all as specified and directed.

M&L for PCC 1:2:4, type B-0 (using 12.5mm graded stone aggregates) on roof top as a leveling course / padding to maintain the slope,finished the surface even and smooth without using extra cement, complete all as specified & as directed .

Taking down of old roof treatment of any description including mud phushka, lime, concrete,tiles , cement plaster, padding upto 30cm depth from roof surfaces etc including cleaning, brushing and watering to joints and grooves and throwing the same to a distance exc 250 mtr and n exc 500 mtr from the roof of height 3 to 9 m m height etc and M&L for provn of water proofing treatment to non accessible RCC roof with approved modified membrane weight not less than 3 kg/sqm comprising with following items (item No. 28.01 to 28.06) complete all as specified and as directed.

M&L for 10mm thick plaster in CM 1:4 mixed with and including water proofing compound @ 3% by weight of cement applied over roof slab complete all as specified and directed. (Note :- WPC shall be measured and paid separately)

The surface of roof, parapet and gutters drain mouths etc over which water proofing treatment is to be applied shall be cleaned of all foreign matter such as fungus,mass dust etc by wire brushing and dusting. For cast iron drain outlets a groove shall be cut .

Oil based Bitumen primer conforming to IS-3384-1986 @ 0.3 kg per sqm to be applied on prepared surface till the surface is properly impregnated.

Applying one coat of hot blown bitumen of 85/25 grade @ 1.20 kg/Sqm.

Laying of water proofing APP modified polymeric water proofing membrane of weight not less than 3 Kg / sqm composed of 100 micron (+10% ) high density polyethylene sheet ( HMHDPE) as center core, which is sandwitched between high quality polymeric bitumen mix having softening , high heat resistance and cold flexible protected on either side with a thin thermo fusible HMHDPE film with side and laps 75 mm and 100 mm as per manufacture instruction etc.

Applying aluminium paint in two coat @ 100 gm/sqm in each coat on finished membrane surfaces, complete all as specified and directed at site .

Dismanling of plain or corrugated steel sheeting, any gauge, thickness, incl nainital or similar pattern roof covering complete all as specified and directed.

Dismantling of Asbestos cement ( corrugated, semi corrugated, ec) sheets roofing complete all as specified and directed.

S&F 6mm thick Asbestos cement, corrugated or semi corrugated sheets in roof walls etc fixed with J / L bolts complete all as specified and directed.

All as per Srl item No 31 above but except sheets - ditto - Note:- Serviceable sheets obtained from Srl item No.30 above shall be re-used in this item

S&F 6mm thick Asbestos cement two piece adjustable plain wing ridge fixed with J / L bolts complete all as specified and directed.

S&F 0.63mm Galvanised, corrugated Mild steel sheeting with two corrogations side lap, fixed with J/L bolts in roofs, walls etc galvanised class-viii with grade of Zinc coating 125 gms complete all as specified and directed

S&F 0.50 mm thick galvalume sheet precoated coloured profile pattern of make Durashine mfg by TATA blue scope building product or equivalent make as approved by GE fixed with self driving screws complete all as specified and directed.

Dismantling timber scantlings 40 Sqcm and over in section, in any position in framed work complete all as specified and directed.

Dismantling of timber fillets, rafter rails, purlins posts etc under 40 sqcm in framed section complete all as specified and directed

M&L for second class hard wood in scantling Clean Sawn timber fixed as in rafters / purlins complete all as specified

M&L for preparing surfaces of wood and wood based materials, new or old, of any description and girth not other wise described and treated with one coat of creosote oil complete all as specified and directed

S&F roof trusses (framed), trussed,purlins, crane gantries, rails &fastenings and heavy bracket (Beam, tee, angle, channelor flat sections) including distance pieces, cleats etc FE-410-W(Gde E-250 quality) complete all as specified & directed

S&F mild steel rolled tubular sections as in main and cross beams, hip and jack rafters; purlins Posts where connected to common rafters and angle cleats or other connecting plates incl wind ties etc Fe410 Gde E-250) Quality A complete all as specified and directed

M&L preparation of new steel surfaces and appllying two coats of systhetic enamel paint over a coal of red oxide / zinc chrome surfaces of any description, over 10cm width or girth, not otherwise described complete all as specified and directed

Dismantling of any type or ceiling boards in thickness incl cover fillets complete all as specified and directed.

M&L for 600x600x7mm thick vinyl face, cinyl covered edges and washable metallized polyster foil backing, weight @ 5.6Kg/m2 suspended false ceilling comprising of non asbestos fibre cement bulding boards fixed or laid/inserted to GI frame work with screws over GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to sourrounding wall using nylon sleeves and screws at 450mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fastners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm center to centre including hangers 6mmm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60mm long complete all as specified. Make : ArmGyp-FB Ceilings (Armstrong) Model : Sleet (Alpha Lite)

Taking down chowkats or frames with shutters (without taking off shutter from frames) not exc. 1.5 sq. m each, complete all as specified and directed.

Taking down chowkhats or frame exc 1.50 Sqm but n exc 4 Sqm each with shutters (with out taking off shutters from the frames) including removing from site complete all as specified and directed

Taking down shutters of any description exc 1 Sqm but n exc. 2 Sqm each complete all as specified and directed

S&F pressed steel frames for doors of size 125mmx60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, complete all as specified and directed.

S&F pressed steel frames for doors of size 105mmx60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, complete all as specified and directed.

M&L for PCC 1:3:6 type C-0 (using 12.5mm grade stone aggregates) as in filling of chowkhats or pressed steel door frame complete all as specified and directed

S&F 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

M&L for 35mm thick 2nd class Hardwood glazed & skelton shutters open rebated and prepared to receive glass pane or gauge etc ( without sash bars ) edges of framing plain chamfered or rounded fitted with cut and mitred rebated for securing glass etc.size of members of shutters complete all as specified and directed

M&L for 30mm thick 2nd class hardwood glazed & skelton shutters open rebated and prepared to receive glass pane or gauge etc ( with square or mitred sash bars ) provided with stiles and rails as specified in SSR Part I, Sec 8, clause 8.20 (b) edges of framing plain chamfered or rounded fitted with cut and mitred rebated for securing glass etc.size of members of shutters as specified

S&F factory made PVC door frame of size 50 mm x 47 mm with wall thickness of 5 mm made out of extended 5 mm Prelam PVC sheet cut at corner and jointed with 02 Nos., 150 mm long brackets of size 15 mm x 15 mm mild steel square tubes 19 gauge including vertical door profiles reinforced with 19 mm x 19 mm steel square tube of 19 gauge (EPDM) rubber gasket weather seal provided through out the frame and fixed to wall with 65/100 mm long mild steel screws through the frame by using PVC fasteners (minimum of 04 Nos. of screws to be provided for each vertical number & minimum 02 Nos. for horizontal member) complete all as specified and directed.

S&F factory made soild PVC moulded door shutter, 28mm to 30 mm thick (stiles) with wood free EPS with 2, 4 or 6 raised panel design with 2mm thick moulded prelam PVC sheet on the front face & 2mm thick plain colour sheet on back face complete all as specified and directed.

M&L for sanding newly tarred or painted surfaces with clean sharp sand complete all as specified and directed.

M&L for PCC 1:3:6 type C-1 (using 20mm graded stone aggregates) as in bed blocks for hold fast complete all as specified and directed.

M&L for preparing surface of wood & wood based materials, steel & iron work, new or old, of area exc 0.1 Sqm but n.exc 0.50 Sqm each & treated with tar or coal tar black paint complete all as specified and directed.

All as per Srl item No 58 as above but treating small articles such as stop, covers, gully gratings, holdfasts, ends of posts, backs of chowkats, etc., area not exc 0.1 sqm each complete all as specified.

S&F MS butt hinges 100mm size medium weight, coled rolled and fixed with screws complete all as specified and directed.

S&F for 200mm size Aluminium anodised barrel tower bolt of extruded section and fixed with screws complete all as specified and directed.

S&F extruded aluminium alloy handles, fabricated type., anodised Size of handle 150mm fixed with steel screws complete all as specified and directed.

S&F 250mm long Aluminium alloy anodised Sliding door both with hasp, staple( bolt type) and fixed clips of sheet , cast or extruded sections and fixing bolts and sliding of extruded sections or cast -aluminium alloy and fixed with steel screws complete all as specified and directed.

Hacking out old broken glasses (any thickness size qualityor description) from wdn frames or fixed with beads complete all as specified and directed.

S&F 3mm thick Sheet glass ordinary quality frosted on side fixed wdn beads / oil putty in square n. ex 0.50 sqm in each pane complete all as specified and directed.

S&F 4mm thick Sheet glass pin head type fixed wdn beads / oil putty in square n. ex 0.50 sqm in each pane complete all as specified and directed.

S&F in repairs stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed with tinned tack or stainless steel wire staple complete all as specified and directed.

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed with tinned tack or stainless steel wire staple complete all as specified and directed.

S&F in repair Rotational moulded polyethylene water storage tanks capacity 500 ltrs (cylindrical vertical with closed top) three layered wall construction hoisted and fixed in position including dismantling of old unserviceable water tank complete all as specified and directed.

S&F in repair Rotational moulded polyethylene water storage tanks capacity 1000 ltrs (cylindrical vertical with closed top) three layered wall construction hoisted and fixed in position including dismantling of old unserviceable water tank complete all as specified and directed.

S&F 20mm Ball valves, high pressure of PTMT with high density plastic bass screwed for iron pipe and fixed (min wt 20mm - 210 gms) complete all as specified and directed.

S&F as in repairs 20mm dia bore Gun metal, Globe or gate valves, with iron head or lever screwed both ends for iron pipe fixed complete all as specified and directed.

Cutting chases, pinning in, in brick wall making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring. etc. and making good, cutting not exceeding 10cm girth complete all as specified and directed.

Taking down 15 mm bore GI tubing and connection complete all as specified and directed.

Refixing 15mm bore GI tubing medium grade to walls and ceilings or laying in floors (Note : GI Pipe obtained from Srl item No. 74 shall be re used)

Taking down 20 mm bore GI tubing and connection complete all as specified and directed.

Refixing 20mm bore GI tubing medium grade to walls and ceilings or laying in floors (Note : GI Pipe obtained from item No. 76 shall be re used)

Taking down 25 mm bore GI tubing and connection complete all as specified and directed.

Refixing 25mm bore GI tubing medium grade to walls and ceilings or laying in floors (Note : GI Pipe obtained from item No. 78 shall be re used)

S&F 15mm bore Galvanised Mild steel tubing medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F 20mm bore Galvanised Mild steel tubing medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed..

S&F 25mm bore Galvanised Mild steel tubing medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed..

S&F in repair PVC low level flushing cistern of 10 Ltr capacity (Dual flush ) including flushing pipe bend complete all as specified and directed.

S&F in repair vitreous China squatting pan “ORISSA” pattern size 580mm X 440mm, white with P or S trap front or back inlet with integral foot rest (excl flushing cistern & flush pipe) & including connection to trap & to flushing pipe anti syphonage pipe, including making good to floor complete all as specified & as directed.

S&F in repairs of vitreous China wash down Water closet (pedestal pattern) white (excluding flushing cistern and flush pipe) incl white seat cover complete all as specified and directed

S&F in repairs of vitreous China wall mounted Water closet complete set all as specified and directed (Make Parryware Cascade Nxt Popular series Cat Nos. C0208,C0771, E8300)

S&F in repairs vitreous China pedestal pattern EWC complete all as specified and directed (Make : Parryware Qube series C844A (P/S) Trap)

S&F in repair vitreous China urinal half stall type, flat back of size 465mm x 355mm x 265mm (minimum) white with grating and union for discharge pipe , waste pipe (excluding flushing cistern,flush pipe ) complete all as specified and directed.

S&F in repair vitreous China WHB white flat back size 550x400mm including S&F angle iron brackets, C.P pillar tap fancy type 01 No 15mm bore, CP waste coupling, 32mm dia and PVC waste pipe 32mm dia and PVC connection 450mm long high pressure complete all as specified & directed.

S&F in repair bib taps, cast copper alloy chromium plated fancy type with crutch or butterfly handle, sc-rewed down, screwed for iron pipe or for brass ferrule of 15 mm bore and fixed complete all as specified and directed.

S&F in repairs self closing taps, cast copper alloy chromium plated , screwed for iron pipe 15 mm bore and fixed complete all as specified and directed.

S&F in repair angle valve, cast copper alloy, screwed down, high pressure, with crutch or butter fly handle, fancy type, chromium plated, with long shank and cup screwed both ends for iron pipe or for unions 15 mm bore fixed in repair, complete all as specified and directed by Engineer in charge..

S&F as in repairs 15mm dia bib tap standard of PTMT any colour screwed , for iron pipe and fixed (Min wt 15mm 90 gms ) complete all as specified and directed.

S&F in repairs 15 mm bore Cast copper alloy chromium plated wall mixer for mixing hot & cold water screwed down for iron pipe & fixed complete all as specified and directed.

S&F in repair Hand shower (Health faucet) Cast copper alloy chromium plated with 8mm dia , one metre long flexible tube & wall hook complete screwed for iron pipe bore dia 15mm complete all as specified and directed. Make :Jaquar Allied Series ALD-573 or equivalent make in Marc/Cera as approved by GE

S&F as in repair Multi bib tap 2 in 1 , cast copper alloy chromium plated fency type with crutch or butterfly handle, sc-rewed down, screwed for iron pipe or for brass ferrule of 15 mm boreand fixed complete all as specified and directed.

S&F 32mm dia sink waste coupling of PTMT of ISI Marked complete all as specified and directed.

S&F PVC connections 15mm bore size450 in length with both end brass/pvc high quality nuts complete all as specified & directed.

S&F in repairs brass chromium plated shower rose fancy type with or without swivel joints, including fixing to steel pipe complete all as specified & directed.

S&F in repairs of 75mm dia PVC (SWR) multi floor trap with Hinge type SS grating including jointing with solvent cement complete all as specified & directed.

S&F in repairs 110mm dia PVC(SWR) pipes single soketed in any length with rubber ring jointed laid in trenches or in floors complete all as specified & directed.

S&F in repairs 110mm dia PVC(SWR) pipes single soketed in any length with rubber ring jointed and fixed to walls complete all as specified & directed.

S&F 75 mm dia PVC(SWR) pipes single soketed in any length with rubber ring jointed fixed to wall complete all as specified & directed.

S&F PVC (SWR) pipes 75mm dia single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified & directed.

S&F Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc. 50 mm bore.

S&F PVC (SWR) bends 110 mm dia complete all as specified and directed

S&F PVC (SWR) bends 110 mm dia with access door all as specified and directed

S&F PVC (SWR) bends 75 mm dia complete all as specified and directed

S&F PVC (SWR) bends 75 mm dia with access door all as specified and directed

S&F PVC (SWR) 110 mm dia junction, single(single 'T') equal or unequal with acess door complete all as specified & directed. .

S&F PVC (SWR) 75 mm dia junction, single(single 'T') equal or unequal complete all as specified & directed. .

S&F 110mm bore PVC (SWR) vent cowl complete all as specified & directed.

S&F Bands, straps, supports or stays for rainwater; ventilating pipes, including bolts , if required; hooks (stay), heavy, for large gates; hook and pintle hinges; large hasps and staples; chains; hand made sliding bolts; clamps; holdfasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe 290. Gde E-165 complete all as specified & directed.

M&L for second class Hardwood plain fillets square, rectangular in section wrought , secured with nails or brads area n exc. 3 sqcm complete all as specified & directed.

S&F 18/19 mm thick pre laminated paticle board, as in cupboards, shelves, pelmets etc sexterior grade, pre laminated one side decoraded choice lamination and other side balancing white lamination cut to required size and fixed to frame complete all as specified & directed.

S&F 100mm long Hasp and Staple, safety type Aluminium with MS hinge pin incl bolt to hinge plate and fixed with screws complete all as specified & directed.

M&L for applying one coat of systhetic enamel paint surfaces of any description, over 10cm width or girth, not otherwise described on old painted surface including preparation of old wooden surfaces complete all as specified and directed

M&L for applying one coat of systhetic enamel paint surfaces of any description, over 10cm width or girth, not otherwise described on old painted surface including preparation of old steel surfaces complete all as specified and directed

S&F in repair Mild steel tubing of 25 mm dia with PVC coating for curtain rod fancy type including fancy type PVC rings and CP brass brackets (wall to wall or flush to wall) for securing to curtain rod, fixed in repair complete all as specified and directed.

S&F in repairs kitchen sink made of stainless steel 1mm thick with plugs, washers, coupling & down take waste piple ; including bedding in CM on to dwarf wall or including fixing cantilever brackets & connecting union to pipe, overall size 495mm x 420mm, bowl size 410mm x 330mm x 160mm complete all as specified and directed.

M & L for 10mm thick plaster in CM 1:4 mixed with and including water proofing compound @ 3% by weight of cement applied over roof slab complete all as specified & directed. (Note : WPC shall be measured and paid separately)

M & L for rendering 15mm thick in cement mortar 1:6 brick work / Concrete / Stone surfaces finishing the surfaces fair and even etc. complete all as specified and directed

M&L for two coat of cement plaster on stone or brick masonary wall surfaces ,first coat 10mm thick in CM 1:6 and second coat cement plaster 10 mm thick in CM 1:4 with WPC @ 3 % by the weight of cement, finished even and smooth without using extra cement (Note:-WPC shall be paid seperately under respective item) complete all as specified & directed.

M&L for rendering 5 mm thick cement plaster in CM 1:3 on concrete surfaces as in ceiling finished even and smooth (without using extra cement) complete all as specified and directed

M&L for complete removal of existing treatment on walls and prepration of old surfaces & applying birla / J. K. wall care white putty 2 mm thick for levelling the surfaces & applying two coats of exterior emulsion weather proof paint over one coat of exterior wall primer incl. properly making of v shape crakes and filling of all crakes with crakes seal of walls complete all as specified and directed by Engr-in-charge. Make Asian ACE or equivalent

M & L for prepration of newly plastered wall sufaces & applying birla / J. K. wall care white putty 2 mm thick for levelling the surfaces & applying two coats exterior emulsion weather proof paint over one coat of exterior wall primer incl. of walls complete all as specified and directed by Engr-in-charge. Make Asian ACE or equivalent

M&L for complete removal of existing treatment from walls and applying 2mm thick Birla/J K wall care white putty on walls and applying two coat of Acrylic emulsion paint over a coat with alkali resistant primer complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying 2mm thick Birla / J K wall care white putty on walls and applying two coat of Acrylic emulsion paint over a coat with alkali resistant primer complete (internal wall) complete all as specified and directed.

M &L for applying two coats of white wash on old decorated ceiling surfaces including prepration of old surfaces complete all as specified & directed.

Supply only integral water proofing compound, completeall as specified and directed.

M&L for applying evenly two coats of industrial bitumen 85/25 at the rate of 1.20 Kg/Sqm in each coat over vertical surfaces and floors of sunken floors of toilet including cleaning of surfaces complete all as specified & directed. .

M&L for PCC 1:7:12 type F2 (using 40 mm graded stone aggregates) as in filling (sunken portion). complete all as specified & directed.

M&L for PCC 1:2:4 type B0 (using 12.50 mm graded stone aggregates) mixed with WPC @ 3% by wt. of cement, as sub base, 75mm thick. (WPC will be measured and paid separately.) to receive top layer complete all as specified & directed.

Dismantling wroght iron or mild steel work of any description not otherwise provided , complete all as specified and directed.

S&F Stainless steel circular/square section incl plate/sheets/decorative items like dooms, cover cups etc as in frame work for road sign board , complete all as specified and directed

S&F in repair retro reflective sign face (Square or rectengular ) consist of 2mm thick aluminium composite signsubstrate and over all lamination using high intensity grade tectro reflective media 3 M or unicorp make conforming to ASTM 4956 type -IV or above with text cutting as per direction of Engr-in-Charge. Using computerised cutter plotter & pneumatic automated squeeze roll applictor ) on overlay film or similar sheetng for text /graphics & symbol etc as per approved design and alumium rivets, break away type nut/bolts (Each sign face shall be acked by stainelss sel frame and stainless stel itmes will be measured and paid separately)

Demolition of PCC in ground floors & pavings n exc 15 cm thickness (unreinforced), complete all as specified and directed.

M&L for 100 mm thick PCC 1:4:8, type D2 (using 40 mm graded stone aggregates) as in sub base of floors complete all as specified and directed

M&L 60mm thick Machine made coloured precast concrete interlocking paver block, rubber moulded with grey cement and pigment any shape and size confirming to IS 15658 - 2006 of M-35 grade, laid over and including sand cushion not less than 50mm thickness complete all as specified & directed.

M&L for 25mm thick (measured solid), precast cement concrete louvres and jallies, with 1:2:4 mix, type B0 using 12.50mm graded stone aggregatr including all mouldings but excluding frame, set in CM (1:4) complete all as specified and directed.

M&L for preparation of newly plastered wall surface and applying two coat of synthetic enamel paint over a coat of cement primer when painted in different tint of any desription over 10cm width or girth and leaving premises in a clean state complete all as specified and directed

M&L for preparation of old plastered wall surface and applying one coat of synthetic enamel paint when painted in different tint of any desription over 10cm width or girth and leaving premises in a clean state complete all as specified and directed

S&F factory made solid panel PVC door shutter 30mm thick (style) constiting of frame made out of mild steel tubes for top & bottom rails, mild steel frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rails, lock rail & bottom rail on either side and as gap insert for top rail & bottonm rail, panel of plain colour PVC sheet fitted in the mild steel frame welded/sealed to the stiles jointed together with solvent cement complete all as specified and directed.

v k builder