M/o Water Supply (Two Years Annual Repairing of Bowl Assly. and Tube Shaft Set of Network-74, 78, 112, 113, 115, 118 and Village-Sorkha) Noida.

CAPABILITY STATEMENT

* It is compulsory for the bidder to fill this statement and the bidder must upload only those document that support this statement

Tender Reference No : 27/SM(JAL)-I/ET/2025-26 Select

Name of Work : M/o Water Supply (Two Years Annual Repairing of Bowl Assly. & Tube Shaft Set of Network-74, 78, 112, 113, 115, 118 & Village-Sorkha) Noida. Provided

Name of Tenderer

TOTAL NIT COST OF PROJECT (In Rs.) (In lacs) 7662936

S. NO. ELIGIBILITY CRITERIA (Value To Be Filled By the Tenderer In Indian Rs.) Status FINAL STATUS QUALIFIED

1 SOLVENCY (Issued within a period of maximum six months). 40% OF TOTAL ESTIMATED COST NOT QUALIFIED NOT QUALIFIED

2 EXPERIENCE (WITH GOVERNMENT/SEMI- GOVERNEMTN/ PSUs ONLY) completed works during the last 7 years ending last day of the month previous to the one in which applications are invited Three similar completed works each costing not less than the amount equal to 40% of estimated cost put to tender NOT QUALIFIED

Two similar completed works each costing not less than the amount equal to 60% of estimated cost put to tender NOT QUALIFIED NOT QUALIFIED

One similar completed works costing not less than the amount equal to 80% of estimated cost put to tender NOT QUALIFIED NOT QUALIFIED

RESULT OF EXPERIENCE NOT QUALIFIED

3 TURNOVER (During the immediate LAST 3 consecutive financial years) 30% OF TOTAL ESTIMATED COST

YEAR1 0 NOT QUALIFIED NOT QUALIFIED

Average annual financial turnover on construction works should be atleast 30% of the estimate cost during the immediate last 3 consecutive financial years.

4 Required Technical Staff (* the bidder must sumit the supporting document in original) Select

5 Required Machinary (* the bidder must sumit the supporting document in original) Select

6 Character certificate of Individual/Partners/directors issued from District Magistrate. Select

7 Affidavit of Not blacklisted. Select

8 Address Proof/ Id.Proof of Individual/partners/directors. Select .

9 GST Registration certifcate. Select

10 Filled in form Capability Statement.. Select

11 Self declaration affidavit on Rs. 100/- Notarised Stamp paper Select

12 Latest ITR Select

13 Affidavit of stating No Blood relative in Noida Authority (Regular / Contract) Select

14 Certified Copies of relevant pages of following documents: Select

a Memorandum and Article of Association showing objectives of the Company/ firm and authority to sign the e-Bid/ contract or delegate the power to others for signing the e-Bid/contract Select

b Place of registration Select

c The power-of-attorney authorizing the tenderer to sign the e-Bid/ contract. Select

d PAN certificate of the company/firm. Select

Note :- If Tender value is Ten lacs & below Ten lacs then above condition no.-1, 2 & 3 will not applicable.

RESULT NOT QUALIFIED

Select, At Par, Excess (+), Less (-) IOCL

Tender Inviting Authority: GENERAL MANAGER (JAL)

Name of Work: M/o Water Supply (Two Years Annual Repairing of Bowl Assly. & Tube Shaft Set of Network-74, 78, 112, 113, 115, 118 & Village-Sorkha) Noida.

Contract No: 27/SM(JAL)-I/ET/2025-26

Sl. No. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category

40 HP Pump S/F Line Shaft 3.0 m x 25 mm. (NSI-4.1.05) Nos. Excess(+) Full Conversion INR

S/F Line Shaft 1.5 m x 25 mm. (NSI-4.1.06) Nos. Excess(+) Full Conversion INR

S/F Top Shaft 2.20m. Long 25mm with chuck nut. (NSI-4.1.07) Nos. Excess(+) Full Conversion INR

S/F Oil Tube heavy 'C' class 1.5 m x 40 mm (NSI-4.1.08) Nos. Excess(+) Full Conversion INR

S/F Top Tube 40mm. Size (NSI-4.1.09) Nos. Excess(+) Full Conversion INR

S/F Line Shaft Bearing 40mm x 25mm (NSI-4.1.10) Nos. Excess(+) Full Conversion INR

S/F Rubber Spider 150 x 40mm (NSI-4.1.11) Nos. Excess(+) Full Conversion INR

S/F Rubber Spider 100x40mm. (NSI-4.3.33) Nos. Excess(+) Full Conversion INR

S/F Line Shaft Coupling 25 mm (NSI-4.1.14) Nos. Excess(+) Full Conversion INR

S/F Oil Nut G.M. (NSI-4.1.12) Nos. Excess(+) Full Conversion INR

S/F T.T. Nut G.M. (NSI-4.1.13) Nos. Excess(+) Full Conversion INR

S/F Rubber Packing 150 mm. Dia. (NSI-4.1.16) Nos. Excess(+) Full Conversion INR

S/F Rubber Packing 100 mm. Dia. (NSI-4.3.34) Nos. Excess(+) Full Conversion INR

S/F Nut & Bolts 2.5''x4''' (NSI-4.1.15) Kgs. Excess(+) Full Conversion INR

S/F Discharge head size 150mm x 150mm with T.T. Plate suitable for 40 H.P. Motor (NSI-4.1.01) Nos. Excess(+) Full Conversion INR

S/F Head Flange 150 mm dia. (NSI-4.1.04) Nos. Excess(+) Full Conversion INR

S/F Head Flange150x100 mm dia. (NSI-4.3.35) Nos. Excess(+) Full Conversion INR

S/F Oil Lubrication Tank with bracket. (NSI-4.1.02) Nos. Excess(+) Full Conversion INR

S/F Side Feed Valve with screwed C.I. (NSI-4.1.03) Nos. Excess(+) Full Conversion INR

S/F Column Pipe heavy 'C' class 3.0 m.x150mm. Dia 7.1 mm thickness with welded flange & suitable ribs at both ends male & female. (NSI-4.1.17) Nos. Excess(+) Full Conversion INR

S/F Column Pipe heavy 'C' class 1.50 m.x150mm. Dia 7.1 mm thickness with welded flange & suitable ribs at one end socket at other end. (NSI-4.1.18) Nos. Excess(+) Full Conversion INR

S/F Column Pipe heavy 'C' class 3.0 m.x100mm. Dia heavy 'C' Class with M. S. Flange at both ends dully welded with four nos. ribs. (NSI-4.3.31) Nos. Excess(+) Full Conversion INR

S/F Column Pipe heavy 'C' class 1.50 m.x100mm. Dia heavy 'C' Class with M. S. Flange at both ends dully welded with four nos. ribs. (NSI-4.3.32) Nos. Excess(+) Full Conversion INR

S/F Centrifugal VT Pump Bowl Assly 10 stage for 1000 LPH discharge at 45 mtr. Head of 100mmx40mmx25mm size. (NSI-4.3.30) Nos. Excess(+) Full Conversion INR

S/F V.T. Pump Bowl Assembly 6 stages having Bronze impellers and SS Shaft of 150x25 mm Suitable for 1600 LPM discharge at 80m. head oil lubricated type as per ISS 1710. (NSI-4.2.15) Nos. Excess(+) Full Conversion INR

S/F Neck Ring GM (NSI-4.2.01) Nos. Excess(+) Full Conversion INR

S/F Bowl Bush GM (NSI-4.2.02) Nos. Excess(+) Full Conversion INR

S/F Suction & Discharge Bush (NSI-4.2.03) Nos. Excess(+) Full Conversion INR

S/F Discharge Case Screw Bush (NSI-4.2.04) Nos. Excess(+) Full Conversion INR

S/F Lock Collect MS (NSI-4.2.05) Nos. Excess(+) Full Conversion INR

S/F Tubing adoter with bush (NSI-4.2.06) Nos. Excess(+) Full Conversion INR

S/F Impeller C.I. (NSI-4.2.08) Nos. Excess(+) Full Conversion INR

S/F Pump Shaft S.S. (NSI-4.2.07) Nos. Excess(+) Full Conversion INR

S/F Inter Bowl (NSI-4.2.09) Nos. Excess(+) Full Conversion INR

S/F Suction Bowl (NSI-4.2.10) Nos. Excess(+) Full Conversion INR

S/F Discharge Bowl (NSI-4.2.11) Nos. Excess(+) Full Conversion INR

S/F Nut & Bolt (Bowl Stud) (NSI-4.2.12) Nos. Excess(+) Full Conversion INR

M/c Inter Bowl (NSI-4.2.13) Jobs. Excess(+) Full Conversion INR

M/c Impeller (NSI-4.2.14) Jobs. Excess(+) Full Conversion INR

100 HP Pump Nos. Excess(+) Full Conversion INR

S/F Line Shaft 1.5 m x 38 mm. (NSI-4.3.10) Nos. Excess(+) Full Conversion INR

S/F SS Sleeves (NSI-4.3.11) Nos. Excess(+) Full Conversion INR

S/F Line Shaft Coupling 38 mm (NSI-4.3.12) Nos. Excess(+) Full Conversion INR

S/F Top Shaft SS with Chuck Nut (NSI-4.3.13) Nos. Excess(+) Full Conversion INR

S/F Spider 250x 38 mm (NSI-4.3.14) Nos. Excess(+) Full Conversion INR

S/F Pump Shaft SS (NSI-4.3.15) Nos. Excess(+) Full Conversion INR

S/F Spider Bush (NSI-4.3.16) Nos. Excess(+) Full Conversion INR

S/F Stuffing Box (NSI-4.3.17) Nos. Excess(+) Full Conversion INR

S/F Rubber Packing 250 mm dia (NSI-4.3.18) Nos. Excess(+) Full Conversion INR

Providing Discharge Head size 250 x 250 mm with TT Plate (NSI-4.3.27) Nos. Excess(+) Full Conversion INR

S/F Neck Ring G.M. (NSI-4.3.01) Nos. Excess(+) Full Conversion INR

S/F Bowl bush G.M. (NSI-4.3.02) Nos. Excess(+) Full Conversion INR

S/F Discharge Case Screw Bush (NSI-4.3.03) Nos. Excess(+) Full Conversion INR

S/F Lock Collect M.S. (NSI-4.3.04) Nos. Excess(+) Full Conversion INR

S/F G M. Gland (NSI-4.3.05) Nos. Excess(+) Full Conversion INR

S/F Stuffing Box Bush (NSI-4.3.06) Nos. Excess(+) Full Conversion INR

S/F Neck Ring on Impeller (NSI-4.3.07) Nos. Excess(+) Full Conversion INR

M/c Inter Bowl (NSI-4.3.19) Nos. Excess(+) Full Conversion INR

M/c Impeller (NSI-4.3.20) Nos. Excess(+) Full Conversion INR

S/F Nut & Bolt (NSI-4.3.21) Nos. Excess(+) Full Conversion INR

S/F Sand Guard (NSI-4.3.22) Job Excess(+) Full Conversion INR

S/F Inter Bowl (100 HP) (NSI-4.3.23) Job Excess(+) Full Conversion INR

S/F Impeller (100 HP) (NSI-4.3.24) Nos. Excess(+) Full Conversion INR

S/F Suction & Discharge Bush (NSI-4.3.25) Nos. Excess(+) Full Conversion INR

S/F Column Pipe heavy 'C' class 1.50 m x 250mm Dia thickness 7.1 mm with welded flanged and suitable ribs at both ends male & female. (NSI-4.3.29) Nos. Excess(+) Full Conversion INR

P/F 150 mm. dia Sluice Valve shall generally conform to IS 14846 with latest amendment, with length over flanged as per PD of IS 14846 corresponding to BS EN-558/ISO 5752 Basic series 3 in CI construction having metal seating (IS 318 Gr. LTB 2). With comple component & material of construction following below:- Nos. Excess(+) Full Conversion INR

1 - Body/Door/Dome-Cast Iron IS 210 Gr. FC 260 2 - Spindle-Non rising: Stainless Steel AISI 410 3 - Body seat/Door face-Gun metal : IS 318 Gr. LTB 2 (rings to be press fitted and riveted: no screws allowed) 4 - Rivets-Soft annealed brass 5 - Spindle Nut-Gun metal : IS 318 Gr. LTB 2 6 - Stem Seal-Greased Hemp 7 - Fasteners-Carbon steel 8 - Flange Drilling - IS 1538 Table 4 & 6 9 - PN 1.0 10 - Accessories (400 mm and above)-Ball thrust bearings to be housed above the wet chamber ie. above the gland. Enclosed Spur Gear Box for ease of operation. Air Plug Nos. Excess(+) Full Conversion INR

11 - Painting/Coating - Inside & Outside epoxy liquid coated, DFT minimum 250 micron, shade RAL 5005/5015 (BLUE) 12 - Hydro-test-(Open Ended only) (Seat : 10/16 Kg/cm2; Body: 15/24 Kg/cm2 13 - Upto 600mm dia Mannual Operated & above 600mm Gear box (Make-IVC/Kirloskar) (NSI-1.19) Nos. Excess(+) Full Conversion INR

P/F 150mm dia Reflex Valve shall conform to IS 5312 Part-1 & above to IS 5312 Part-2 with latest amendment, Valves shall be in graded CI with metal to metal (IS 318 Gr. LTB 2) seating, preferably slanted (and not perpendicular) vis-a-vis horizontal axis; SS AISI 410 stub pins & slant seat design. with comple component & material of construction following below:- Nos. Excess(+) Full Conversion INR

1 - Body/Door/Dome-Cast Iron IS 210 Gr. FC 260 2 - Hinge pin (single door)/Stub pin (multidoor type)-SS AISI 410 3 - Seat & Face rings-Gun metal : IS 318 Gr. LTB 2 4 - Rivets-Soft annealed brass 5 - Fasteners-Carbon steel 6 - Flange Drilling-IS 1538 Table 4 & 6 7 - PN 1.0 8 - By-pass arrangement-Optional 9 - Painting/Coating-Inside & Outside epoxy liquid coated, DFT minimum 250 micron, shade RAL 5005/5015 (BLUE) 10 - Hydro-test Seat : Seat : 10/16 Kg/cm2, Body: 15/24 Kg/cm2 Make-IVC/Kirloskar) (NSI-1.10.02) Nos. Excess(+) Full Conversion INR

Total in Figures

Quoted Rate in Figures Select

Please Enable Macros to View BoQ information